|
|
January 12th, 2014
 After Colorado banned full-capacity magazines, Magpul Industries began looking for a more gun-friendly location. After considering various options, Magpul Industries has decided to move its manufacturing, distribution, and shipping operations to Cheyenne, Wyoming. The company said it plans to lease a 58,000-square-foot manufacturing and distribution facility while a new 100,000-square-foot facility is being completed in Cheyenne. Magpul also plans to move its corporate headquarters to Texas. Magpul Industries currently employs over 200 people in Colorado, contributing over $80 million annually to Colorado’s economy. Colorado can kiss that $80 million goodbye, as Magpul plans to move virtually all operations to Wyoming or Texas.
Richard Fitzpatrick, Founder, President, and CEO of Magpul Industries, said that Magpul had no choice but to leave when Colorado outlawed Magpul’s “core products”. The company began a nationwide search for a new base of operations after legislation was enacted in Colorado that restricted the sale of firearms accessories — the core of Magpul’s business.
Magpul plans to transition 92% of its current workforce outside of Colorado within 12-16 months and will maintain only limited operations in Colorado. “Moving operations to states that support our culture of individual liberties and personal responsibility is important,” explained Fitzpatrick, who added: “This relocation will also improve business operations and logistics as we utilize the strengths of Texas and Wyoming in our expansion.”
January 12th, 2014
Next time you have a barrel fitted, consider having your gunsmith create a “stub gauge” from a left-over piece of barrel steel (ideally taken from your new barrel blank). The outside diameter isn’t important — the key thing is that the stub gauge is created with the same reamer used to chamber your current barrel, and the stub must have the same bore diameter, with the same land/groove configuration, as the barrel on your rifle. When properly made, a stub gauge gives you an accurate three-dimensional model of the upper section of your chamber and throat. This comes in handy when you need to bump your case shoulders. Just slide a fired case (with spent primer removed) in the stub gauge and measure from base of case to the end of the gauge. Then, after bumping, re-measure to confirm how much you’ve moved the shoulder.
In addition, the stub gauge lets you measure the original length to lands and freebore when your barrel was new. This gives you a baseline to accurately assess how far your throat erodes with use. Of course, as the throat wears, to get true length-to-lands dimension, you need take your measurement using your actual barrel. The barrel stub gauge helps you set the initial bullet seating depth. Seating depth is then adjusted accordingly, based on observed throat erosion, or your preferred seating depth.
Forum member RussT explains: “My gunsmith [makes a stub gauge] for me on every barrel now. I order a barrel an inch longer and that gives him enough material when he cuts off the end to give me a nice case gauge. Though I don’t have him cut that nice-looking window in the side (as shown in photos). That’s a neat option. You can tell how much throat erosion you are getting from when it was new as well. For measuring initial seating depths, this is the most useful item on my loading bench next to calipers. Everyone should have a case gauge made by there smith if you have a new barrel put on.”
Forum member Lawrence H. has stub gauges made with his chamber reamers for each new barrel. He has his smith cut a port in the stub steel so Lawrence can actually see how the bullet engages the rifling in a newly-cut chamber. With this “view port”, one can also see how the case-neck fits in the chamber. Lawrence tells us: “My stub gauges are made from my barrels and cut with my chamber reamers. With them I can measure where my bullets are ‘touching the lands’ and shoulder bump dimensions. This is a very simple tool that provides accurate information.” To learn more about stub gauges, read this Forum Thread. The photos above and below show Lawrence’s stub gauges:
January 12th, 2014
 Redding is now offering Micro-Adjusting Taper Crimp Dies for the .223 Remington (5.56×45) and .308 Winchester (7.62×51), the two most popular cartridges used in competitive rifle shooting. New for 2014, these top-adjusting, micrometer-style dies, you can adjust crimp precisely without having to back-out the die and reposition the lock ring.
The process of traditional taper crimp die adjustment is generally both time consuming and imprecise due to the 1:14″ thread pitch coupled with the need to reposition the lock ring after each adjustment. The new Redding Micro-Adjusting Taper Crimp Dies for .223 Rem and .308 Win use a knurled, micrometer-type head situated to provide approximately +/- 0.100″ of adjustment after initial die set-up. The actual crimp is applied with a hardened steel “free floating” internal sleeve.
To Taper Crimp or Not to Crimp?
That Depends…
Do you actually need a taper crimp on .223 Rem or .308 Win cartridges? If you are shooting a precision bolt gun, the answer is “probably not”. However, if you are hand-loading ammo for a semi-automatic rifle, there are reasons you may want to apply a taper crimp on the cartridge. And high-volume .223 Rem shooters may want to apply a taper crimp, particularly when loading mixed headstamp brass using a progressive press. The new Redding dies allow you to control the amount of crimp easily and more efficiently. Redding claims that: “Down time and loss of production due to adjustment of the crimp are virtually eliminated, dramatically increasing the rounds per hour rates of all progressive and turret-style presses.”
High-volume hand-loaders often struggle with the realities of case variation and the resulting difficulties in obtaining a uniform crimp. Redding notes: “Case length is not the only variable, as case neck-wall thickness also impacts where the case intersects the die’s tapered crimping surface.”
January 11th, 2014
The International Benchrest Shooters (IBS) has announced the IBS 2013 Shooters of the Year (SOY). Congratulations to these talented IBS shooters who took top honors in their respective disciplines:
1000-Yard SOY – Mike Wilson | 600-Yard SOY – Mike Moses / Tom Jacobs (tie)
Score SOY – Herb Llewellyn | Group SOY – Russ Raines
 Many New Records Set in 2013
For IBS shooters, 2013 was a record-breaking year. Numerous records were broken at all distances from 100 yards out to 1000. Truly noteworthy was the new 600-yard, 5-shot group record set by Rodney Wagner. This has now been officially “sanctified” as a 0.336″ group. No, that’s not .336 MOA — the actual size of the group was 0.336 inches, measured center to center. Many folks would be happy with a group that size at 100 yards. Rodney did it at 600 yards! You can see Rodney with his astonishing 0.336″ (50 Score) five-shot group at right.
Also at 600 yards, Mike Hanes had a great year, posting two new Group Aggregate Records: 1.4901″ (Light Gun), and 1.7797″ (Two-Gun).
In the long-range game, James O’Hara set three new 1000-Yard Light Gun Aggregate records in 2013: Six-Match LG Group Agg, 3.072″; Six-Match LG Score Agg, 49.83; and Ten-Match LG Group Agg, 4.4374″.
In addition to the new records, two Non-Record 250-25X aggregates were logged this year in Score Matches. Kevin Donalds Jr., and Herb Llewellyn each shot a “perfect” 250-25X Agg in 2013.
IBS Annual Winter Meeting in Pennsylvania
This weekend, the IBS holds its Annual Meeting (better known as the “Winter Meeting”) in Harrisburg, PA. After Friday’s social, the business meeting convened at 9:00 a.m. on Saturday. All the officers and board members will be working together to set the goals the organization will pursue in 2014.
Report find by EdLongrange. We welcome reader submissions.
January 11th, 2014
 In our Shooters’ Forum, you’ll find a lengthy thread about accuracy problems with a Savage LRPV, chambered in 6mmBR. The gun would repeatedly split groups at 100 yards, and at 300 yards, the “flyers” would open up the groups to 1.5 MOA or larger. Interestingly, the factory test target (at right) showed a split group — not a good sign.
The gun’s owner, forum member LR_Shooter, tried a variety of tweaks: “I did this, done that… [changed] torque, tang floated, bedded action, recut chamber, and [adjusted firing pin]”. But nothing really helped. Frustrated, LR_Shooter asked his fellow Forum members for help. Much advice was proffered, including the novel idea of removing the middle action screw in the Savage 3-screw target action. Some of the advice proved helpful, but none of the suggested remedies produced a major improvement. This rifle, out of the box, tossed flyers and no amount of tweaking (or changes in shooting technique) really cured the basic problem. That is, until, the factory barrel got replaced…
New Criterion Pre-Fit Barrel Works Wonders
LR_Shooter acquired a Criterion pre-fit barrel from Jim Briggs at Northland Shooters Supply (NSS). These pre-fits are designed for easy installation with the standard Savage barrel nut. Wouldn’t you know it, with a new 30″ heavy-contour barrel on the LRPV, the gun started shooting way better. No more crazy fliers, no more split groups, no more excessive vertical. And the improvement came without any other major modifications. LR_Shooter reports: “I got a replacement barrel from Jim at NSS. It is a 30″ bull Criterion barrel. So far, without playing with torque screws and having my old setup… I’m very satisfied with the barrel I got. Now I have no problem getting [groups] under 0.25 MOA. Finally this thing can shoot!” The targets below, shot with the new Criterion barrel, speak for themselves. The left target was shot at 100 yards, while the target on the right was shot at 300 yards (very impressive).
Targets Shot with Savage LRPV Fitted with Criterion Barrel
Read Thread on Savage Accuracy Issues Fixed By Criterion Barrel
Moral of the Story — Sometimes A New Barrel Really Is the Right Solution
All of us have struggled at times with a rifle that won’t live up to expectations. This Editor personally struggled for over a year with a .260 Rem Savage with a factory tube. The gun tended to split groups and the POI walked as the barrel heated. I tried one powder/primer combination after another, working through a variety of seating depths over many months. I was persistent. Out of stubbornness, I just believed that sooner or later I’d find the magic load.
Well folks, sometimes there’s really nothing you can do about a sub-par barrel. It is what it is. To really improve a gun’s accuracy (particularly a gun with a factory tube), you may need to open your wallet and get a quality aftermarket barrel. Spending months trying one recipe after another may simply be an overwhelming waste of powder, bullets, and your precious time.
Albert Einstein supposedly said: “Insanity is defined as doing the same thing over and over again, and expecting different results.” Well that sort of describes my efforts with my .260 Rem. Once I had enough evidence that my barrel split groups no matter what load combo (and seating depth) I tried, it was time to pony up for a new barrel. When I did finally screw on a nice PacNor 3-groove Supermatch, that Savage suddenly became a true tack-driver. As re-chambered in 6mmBR with the Pac-Nor, in calm conditions, my Savage will now consistently shoot in the twos with heavy bullets, and it can sometimes dip down into the ones with Berger 80gr flat-base bullets. The moral of the story here is simple — don’t waste weeks or months chasing your tail with a barrel that just won’t deliver (after a reasonable amount of testing). Save up for a custom barrel, get it chambered properly, and stop your cycle of frustration.
Contact Information for Northland Shooters Supply:
E-mail: briggs.j-b@q.com (that is Q.com not G.com)
Phone: (763) 682-4296
Fax: (763) 682-6098
Mailing address:
P.O. Box 333
Buffalo, MN 55313
January 11th, 2014
 For 2014, Kelbly’s is introducing a new series of rifles for competition, tactical disciplines and hunting. The Arcas™ Series rifles are complete packages designed with Kelbly’s recommended specifications and top-grade components. Pick your application (Benchrest, F-Open, F-TR, Hunting, Tactical) and Kelbly’s can provide a complete build with all the bells and whistles.
Shown below are the four Arcas competition rifles currently offered. In addition to these four comp guns, the Arcas series includes two tactical-style rifles and two hunting rifles (starting at $2799.00). All these Arcas series rifles will be on display at SHOT Show next week. Let us know (via comments) which Arcas models interest you the most, so we’ll be sure to feature those in our SHOT Show reports.
Every Arcas Series rifle comes with premium components and a wide choice of stock colors. In addition you can have an Arcas rifle customized. For example, the Arcas F-Open rifle shown below can be customized with an extra long barrel ($20 per inch), fluted barrel ($199.00 extra), polished metal (all parts, $249), a GRS Laminated Stock with ergonomic grip (no charge), or a PRT Lowboy stock with high gloss finish ($799 extra).
January 10th, 2014
by Tony Chow
In recent years, the use of electronic trainer systems has revolutionized training in all disciplines of position shooting. By capturing (and illustrating) key performance variables like the steadiness of a shooter’s hold, accuracy of aiming, and the timeliness of trigger release, these devices can offer tremendous insights into the strengths and weakness of a shooter’s position and technique, making high-level marksmanship training less voodoo and more of a science.
Until now, electronic trainers all suffered from one critical limitation: the inability to be used outdoors in live fire training. Now, however, SCATT has introduced the next-generation MX-02 electronic trainer, a product that can finally support outdoor live firing in broad daylight, as well as dry firing indoors. In addition, the MX-02 is the first electronic trainer to support centerfire rifles. It goes without saying that, when we at AccurateShooter.com were offered an MX-02 test unit to review, we jumped at the opportunity.
READ FULL REVIEW of SCATT MX-02 Electronic Trainer
How the SCATT MX-02 Works
The SCATT sensor mounted on the end of the barrel has a digital camera that “sees” the black bullseye in the target, even in broad daylight outdoors. Using the bullseye as a reference, the SCATT software tracks the movement of the muzzle relative to the center of the target. The unit can plot these movements as a continuous trace, which appears on a monitor as a squiggly, colored line. Data points from the trace are also available in a tabular spreadsheet format. This allows the shooter to “crunch the numbers”, revealing strengths and weaknesses in his gun-handling and aiming technique.
In our testing, we confirmed that, like SCATT’s earlier indoor-only WS-01, the MX-02 offers excellent support for indoor dry-fire training, which will continue to be the primary means through which position shooters sharpen their fundamental skills. Since the new SCATT uses the same familiar Windows software for data capture and analysis as its predecessors, shooters and coaches upgrading to MX-02 will have no learning curve to overcome, and newcomers to the SCATT platform can tap into the wealth of institutional knowledge accumulated over the years by the shooting community on how to interpret shot data.
It’s in the support for outdoor live firing, however, that SCATT MX-02 distinguishes itself from its predecessors and the competition. Shot trace data captured by MX-02 during live firing turned out to be every bit as valuable (and revealing) as we had hoped. The ability to correlate SCATT tracing with real shots on target gave us a better understanding of the shooting process, and helped the reviewer, already a high-level smallbore prone shooter, uncover a significant problem in his shooting. SCATT MX-02’s outdoor capability is therefore an invaluable feature, particularly for experienced shooters aspiring to world-class performance.
In summary, SCATT MX-02 is an outstanding product that delivers on its promises. We heartily recommend it, both for first-time users of electronic training aids, and also for those shooters who may wish to upgrade their current electronic training system. The MSRP for SCATT MX-02 is $1,799, $500 more than its predecessor, the SCATT WS-01, which is still available. In my view, the $500 premium for the MX-02 is justified by the MX-02’s enhanced capabilities, making it a better long-term investment.
Our complete, 3600-word MX-02 review of the SCATT MX-02 can be accessed through the link below. This full review contains many more photos plus detailed field test results. For the time being, the review only covers our experience with the product in smallbore shooting. An upcoming addendum to the review will include test results from centerfire shooting. Those attending SHOT Show in Las Vegas next week can examine SCATT MX-02 in person. SCATT will have the MX-02 on display at Booth 111.
READ FULL REVIEW of SCATT MX-02 Electronic Trainer
For more information or to order SCATT products, including the new MX-02, visit ScattUSA.com or call toll-free: 1-855-57-SCATT (72288).
January 10th, 2014
On January 13, 2014, Winchester Ammunition will roll out new products during Media Day at the Range (held at the Boulder City Range outside Las Vegas, NV). We’ll have reporters on hand to check out new ammo options and new hardware from other manufacturers. Here’s a sneak preview of some new products that will be unveiled on Monday. In the box below you can scroll though Winchester’s 2014 new products, which include Winchester Match Rifle Ammo (.223 Rem, 6.5 Creedmoor, .308 Win, .338 LM) Win3Gun ammunition, Win1911 cartridges, new VarmintX ammo, and the new Long Beard XR and Defender shotgun ammo.
Winchester Ammunition 2014 New Products
To learn more about these new items and other products visit Winchester.com. There you’ll find the latest product new, Information on Rebates and Special offers, plust a free online Ballistics Calculator.
January 9th, 2014
 Earlier this week, the U.S. District Court in Illinois declared the City of Chicago’s ban on the sale of firearms to be “unconstitutional under the Second Amendment”. The ruling was issued in a court case filed by Illinois firearms dealers and gun owners, challenging Chicago ordinances that ban virtually all sales and transfers of firearms inside Chicago city limits.
U.S. District Court Judge Edmond Chang held that the Second Amendment includes “the right to acquire a firearm, although that acquisition right is far from absolute[.] But Chicago’s ordinance goes too far in outright banning legal buyers and legal dealers from engaging in lawful acquisitions and lawful sales of firearms[.]”
Click this link to read full decision of U.S. District Court (Northern District of Illinois):
Illinois Assn. of Firearms Retailers et al vs. City of Chicago, et al. (Memorandum Opinion and Order)
[Chicago] Municipal Code § 8-20-100 and the City’s zoning ordinance (MCC § 17-16-0201), which ban gun sales and transfers other than inheritance, are declared unconstitutional under the Second Amendment. The Court will enter judgment for Plaintiffs [Illinois Assn. of Firearms Retailers]. — Order by U.S. District Judge Hon. Edmond E. Chang.
Lawrence G. Keane, NSSF senior vice president and general counsel commented: “This is an important decision because the Court recognized that the lawful commerce in firearms, in which NSSF members are engaged, is protected by the Second Amendment.”
January 9th, 2014
Experienced rifle marksmanship instructors and shooters who would like to receive advanced training and be certified as “Master Instructors” to teach CMP-sanctioned Clinics are invited to apply to attend a CMP Master Instructor Training Workshop. Workshops are periodically held at CMP North (Camp Perry, OH) and CMP South (Anniston, AL) and in conjunction with the Eastern CMP Games and Creedmoor Cup Matches at Camp Butner, NC. CMP-sanctioned rifle clinics teach basic and intermediate rifle marksmanship skills to novice shooters. If you are interested in becoming a Master Instructor, you can apply to attend a two-day Master Instructor Training Workshop.
|
Instructor Training INFO
Instructor Training Application
Clinic Dates for 2014:
February 8-9, Camp Perry, OH
March 15-16, Anniston, AL
May 2-3, Camp Butner, NC
July 15, Camp Perry, OH
October 10-11, Phoenix, AZ |
 |
WHO CAN ATTEND
Attendance at a Master Instructor Training Workshop is usually limited to 30 students per class. This is to ensure that all attendees have sufficient practical opportunities to work with workshop leaders and to practice what is taught. GSM Master Instructor students should possess these qualifications:
- Association with a shooting club or shooting range where the Master Instructor will have opportunities to teach Sanctioned Rifle Clinics.
- Experience teaching rifle marksmanship as a coach or instructor.
- Experience competing in John C. Garand, Springfield or Rimfire Sporter matches at national and club levels.
- Experience as a competitive service rifle shooter (desired, not required).
- Desire to teach marksmanship to new shooters and to help them get a good start.
HOW TO REGISTER
To register for the CMP GSM Master Instructor Training Workshop, complete the APPLICATION FORM. Please submit the completed form on-line, fax it to 419-635-2573, or mail it to: CMP, Attn: Shannon Hand, P. O. Box 576, Port Clinton, OH 43452. There is a $135.00 registration fee, which includes notebook of material, CD, sling, 10 M1 Clips, 20 dummy rounds, and a CMP Rifle Scorebook.
|
