For a prone shooter, particularly on dusty, dirty or sandy ground, muzzle blast is a major bummer. Muzzle blast can be very disturbing — not just for the trigger-puller but for persons on either side of the gun as well. Some muzzle brakes send a huge shockwave back towards the shooter, and others send blast towards the ground, kicking dirt and debris into the prone shooter’s face. If there was a way to illustrate those factors — shockwave and debris — that might help shooters select one brake design over another.
Cal Zant at PrecisionRifleBlog.com applied a unique blend of creativity and resourcefulness to try to answer that question for 20+ muzzle brakes. Using high-speed photography and household products, he captured the blast pattern of 20+ different brake designs for easy side-by-side comparison. Can you figure out how Cal managed to show muzzle brake blasts so clearly? His “hi-viz” solution, revealed in the article, is very clever. See the eye-opening results for 20+ brakes, with illustrative photos, by visiting the Precision Rifle Blog Muzzle Brake Ground Signature Test Page.
A few years ago, some folks released a video that showed how gun control laws might operate in a fictional California of the future. The video shows how State Agency pre-authorization would have to be obtained before a handgun could be employed for self-defense in the home. Sound far-fetched? Well, it turns out that this satirical video was not that far from the truth. That disturbing vision of the future is coming to pass… at least in some parts of California.
The City of Los Angeles recently passed an municipal ordinance that would require handguns to be locked up (or otherwise disabled) when kept in the home. Modeled after a similar law in San Francisco, the Los Angeles ordinance makes it a misdemeanor to keep an unsecured handgun in a home. There are some exceptions to the locking rule (such as when the owner has the firearm in “close proxmity”), but this Los Angeles ordinance still imposes onerous burdens on citizens who might need a firearm to defend themselves in their own homes.
Under the new Los Angeles city ordinance, there is no “pre-authorization” requirement — at least not yet. But that could be the next step, as this video shows…
Think about it… how can you respond to an intruder if you have to call and ask for permission to access your own firearm. How that scenario might unfold is depicted in this video, a chilling preview of gun ownership in California. The video is a dramatization, but it shows what could happen in the Golden State in the not-too-distant future.
The Precision Rifle Series (PRS) is holding its season-ending Championship Match this weekend at a “top-secret” ranch location near Tehachapi, California. The nation’s top 75 PRS marksmen (plus 30 regionally-qualified shooters) have been invited to compete in a challenging series of stages, with targets from 100 yards to well over 1000 yards. This is supreme test of marksman and rifle. The PRS involves shooting from multiple positions, carrying all your hardware over considerable distances. This ain’t no belly benchrest match that’s for sure.
This video showcases the 2014 PRS Championship in Frost, Texas. This year’s PRS Finale will be held in California. (Video is well worth watching — with LOTS of action):
The PRS has attracted a host of sponsors, so the prize table will be huge for this event:
For those interested in learning more about the PRS game, Rich Emmons, one of the founders of the Precision Rifle Series (PRS), has written an insightful article about getting started in the tactical game. Here are highlights from Emmon’s PRS — Intro to Competition article.
Precision Rifle Series — Intro to Competition
by Rich Emmons, PRS President
Tactical Shooting with a precision rifle is not like other disciplines, there is no set course of fire or format. That is what makes it so fun! What I quickly learned from my first competition and the many that followed was there is so much to learn and shooting in competition put everything you thought you knew to the test.
Getting Started — What to Expect
If you’re reading this, you have probably already have been bitten by the long range shooting bug. It can seem quite intimidating to just jump in with a new bunch of shooters you don’t know and shooting lingo you don’t quite understand yet. But here is the key — show up and shoot! I guarantee you if you show up to a match as a new shooter, other experienced shooters will guide you along and give you help on anything you need.
AUDIO: Click Button to hear Rich Emmons Talk about the Precision Rifle Series.
Now, a couple things you should just expect. You’re not as good as you think you are. Don’t expect to come into your first match and beat all the veterans. That just doesn’t happen unless you have had some really good coaching or other shooting competition experience to get you ready for this type of competition. If possible, find a local rifle club that has monthly long range matches, or any type of match will help prepare you for a larger PRS event. Getting involved with a rifle club and starting out shooting monthly matches is definitely the way to jump into competition shooting.
The Gear You Need
The first question that many ask is: “What kind of rifle/caliber/scope do I need?” The easiest answer to this is, the best you can afford. It’s no secret the gear is expensive. It took me several years of buying sub-par gear and eventually trading up to figure this out. Now, a guy can get a real sense of pride of doing it on the cheap, or with a factory rifle. I’ve seen many old Savage 10FPs take down custom rigs that cost 10 times as much. And if that’s all you can afford, then eventually you will learn the limitations of yourself or your gear. As for choice of cartridge/caliber, the Precision Rifle Blog has analyzed three years worth of match results from the best tactical shooters in the nation. CLICK HERE to read an article that reveals what the “top guns” use.
German Salazar has written a very thorough guide to measuring nearly all the critical dimensions of cartridge brass. In his Measuring the Case article, on his Rifleman’s Journal website, German reviews the tools and techniques required to measure everything from case overall length to case neck concentricity. Step-by-step, German shows how to measure: Case Length, Case Body length (below neck), Neck Diameter, Headspace, Base Diameter, Neck Thickness, and Case Neck Concentricity.
If you are an “advanced reloader” or want to be, you should read German’s article. Not only does German explain the most common measuring procedures, he highlights some alternative methods you might not have tried yet. The article also links to related discussions of more complex measurement tasts, such as determining case body wall thickness variation.
Even if you’re not a competitive shooter, measuring your brass can provide important safety benefits. As German explains in the conclusion of his article: “There are obviously a lot of measurements that can be taken on the cartridge case and in some cases, more than one way to take them. However, the first two that any new reloader must learn are case length and neck clearance, these two are safety concerns and if overlooked can results in serious damage to the rifle and injury to you.”
We like to let our readers know about special offers that can save you big bucks on a major purchase. Right now Cabela’s is offering 10% off plus FREE shipping on all orders of $99.00 or more. To qualify, use the coupon code “5TENOFF” during check-out. Or, use the barcode printed below when shopping in a Cabelas store. This offer is good through 11:59 pm EDT on Monday September 7, 2015.
Here are the details of this offer. NOTE: the 10% Off + free shipping offer does NOT apply to firearms, though the offer IS valid for ammunition purchases. CLICK HERE for more details.
- $99 minimum order required, excluding gift cards
– Additional shipping charges for large or heavy items still apply
– Good on Standard Express shipping to U.S. Deliverable Addresses ONLY
– Not valid with any other offer
– Not valid on firearms
– Not valid on boats, gas-powered motors, ATVs/UTVs
– Not valid on gift certificates, gift cards, services, or licenses
– Offer cannot be used on prior purchases
– Cabela’s reserves the right to exclude certain products from this promotion
– Not available to Cabela’s employees
The days of black rifles at Walmart are over apparently. Walmart plans to halt sales of AR-platform rifles and other mag-fed semi-automatic rifles (as well as certain semi-auto shotguns with capacities of 7+ rounds). Currently, AR-15s and other “modern sporting rifles” are sold in roughly one third of the company’s 4,600 U.S. stores. Walmart is the USA’s largest vendor of rifles and ammo, so this is a significant policy change that will impact sportsmen across the country.
Walmart says that its decision to stop selling semi-auto rifles is prompted by reduced demand for AR-type rifles, rather than by political pressures. Walmart spokesman Kory Lundberg told Bloomberg Business, “If you have a product customers aren’t buying, you phase it out,” he said. Shoppers “were buying shotguns and rifles, and so we are increasing assortment in that.” Lundberg stated that Walmart would sell down its remaining AR inventory to zero as stores transition from summer to fall merchandise. (Source: CTD Shooter’s Log, August 28, 2015).
In a recent CNN interview, Walmart CEO Douglas McMillon said: “Our focus, as it relates to firearms, should be hunters and people who shoot sporting clays, and things like that. So the types of rifles we sell, the types of ammunition we sell, should be curated for those things. We believe in serving those customers, we have for a long time, and we believe we should continue to.” But when asked if he would discontinue sales of semi-automatic long guns, McMillon said, “Yes.”
READ MORE About Walmart’s Decision to Halt AR Sales
We are re-publishing this article at the request of Forum members who told us the information proved very valuable. If you haven’t read this Safety Tip before, take a moment to learn how you can inspect your fired brass to determine if there may be a potential for case separation. A case separation can be dangerous, potentially causing serious injury.
On the older Riflemans’ Journal blog, GS Arizona wrote an excellent article about cartridge Case-Head Separation. We strongly recommend that you read this article. It examines the causes of this serious problem and he explains the ways you can inspect your brass to minimize the risk of a case-head separation. As cases get fired multiple times and then resized during reloading, the cases can stretch. Typically, there is a point in the lower section of the case where the case-walls thin out. This is your “danger zone” and you need to watch for tell-tale signs of weakening.
The photo at the top of this article shows a case sectioned so that you can see where the case wall becomes thinner near the web. German scribed a little arrow into the soot inside the case pointing to the thinned area. This case hadn’t split yet, but it most likely would do so after one or two more firings.
One great tip offered involves using a bent paper clip to detect potential case wall problems. Slide the paper clip inside your case to check for thin spots. The author explains: “This simple little tool (bent paper clip) will let you check the inside of cases before you reload them. The thin spot will be immediately apparent as you run the clip up the inside of the case. If you’re seeing a shiny line on the outside and the clip is really hitting a thin spot inside, it’s time to retire the case. If you do this every time you reload, on at least 15% of your cases, you’ll develop a good feel for what the thin spot feels like and how it gets worse as the case is reloaded more times. And if you’re loading the night before a match and feel pressured for time — don’t skip this step!”
Bergara USA offers a new metal-chassis rifle for tactical shooters, such as PRS competitors. Dubbed the Bergara Premier Series Tactical Rifle (aka BPR-17), this new rig features an XLR chassis, and is chambered in .308 Win or 6.5 Creedmoor. With a $2,200.00 MSRP, Bergara’s new rig costs less than a full custom, but it is WAY more expensive than the new Ruger Precision Rifle which sells for $1100-$1250 (street price) at most dealers. For Bergara, this may be a case of “too little, too late” — at least when compared to the new Ruger rifle.
The Bergara Premier Tactical is built with Bergara’s Premier action (which featurs a coned bolt nose and breech for smooth feeding). Notably, this rifle is fitted with a Timney 517 flat trigger with safety, adjustable from 1.5 – 4 pounds. The 416 stainless barrel has a Dead Air suppressor-ready Key Mount Brake. Both barrel and action are Cerakote finished in matte black.
The XLR chassis features an adjustable length of pull (11.25 – 14.75 inches) and adjustable cheek height. The lightweight chassis buttstock features QD flush cups on both sides, ambidextrous cheek rest, mono-pod provision and an enclosed design. For more information, visit www.bergarausa.com.
Bergara Premier Tactical Rifle Specifications:
Calibers: .308 Win., 6.5 Creedmoor
Action: Bergara PREMIER Action
Stock: Custom chassis stock by XLR
Trigger: Timney 517 flat trigger with safety, adjustable from 1.5 – 4 lb.
The Kestrel weather meter is an invaluable tool for shooters. While the standard model Kestrels can record wind and atmospheric conditions, the advanced Kestrel 4500 Shooter’s Weather Meter with Applied Ballistics incorporates a built-in ballistics program developed by Bryan Litz of Applied Ballistics. This is a very powerful tool, but it can be a bit complicated to program at first.
In this detailed 22-minute video, John McQuay of 8541 Tactical shows how to input firearm specs, MV, and BC into a Kestrel 4500 NV (Applied Ballistics model). This handy unit combines a Kestrel Weather meter with a full-fledged ballistics computer.
Step-by-step the video shows how to set up all the important variables. The video shows how to input Muzzle Velocity, Bullet BC (G1 or G7), Zero Distance and the other key ballistics variables. In addition, the video explains how to input gun-specific data such as bore height, barrel twist rate, and barrel rifle twist direction (right-hand vs. left-hand). (Twist direction comes into play in long range spin drift calculations).
If you own a Kestrel 4500 NV (Applied Ballistics), we think you’ll find this video helpful — particularly when it comes to setting up some of the lesser-known data items. The video also offers tips on navigating through the menus most efficiently.
Based on its external appearance, a modern riflescope may seem simple. It’s just a tube with two or three knobs on the outside right? Well, looks can be deceiving. Modern variable focal-length optics are complex systems with lots of internal parts. Modern scopes, even ‘budget’ optics, use multiple lens elements to allow variable magnification levels and parallax adjustment. We had a chance to look inside a riflescope thanks to a product display from ATK, parent of Alliant Powder, CCI, Federal, RCBS, Speer, Weaver Optics. ATK sliced open a Weaver Super Slam scope so you can see the internal lens elements plus the elevation and windage controls. We thought readers would like to see the “inner workings” of a typical modern rifle scope, so we snapped some pictures. The sectioned Super Slam scope was mounted inside a Plexiglas case, making it a bit hard to get super-sharp images, but you can still see the multiple lenses and the complex windage and elevation controls.
On the older Riflemans’ Journal blog, GS Arizona wrote an excellent article about cartridge 
