Tikkas are boring, nondescript hunting rifles right? Wrong. Check out this Tikka T3 tactical with “attitude”. For the British Shooting Show in 2014, the folks at Osprey Rifles placed a Tikka T3 action into a modern modular chassis: “A standard factory Tikka T3 was fully Cerakoted and dropped into a Third Eye Tactical chassis stock which also had the Cerakote treatment. It certainly pulled a crowd and was sold on the Show’s first day! We have been commissioned to do another one straight away.”
If you have been waiting to acquire a chronograph, it may be time to buy. Brownells.com now has the popular new MagnetoSpeed Sporter Chronograph in stock for just $179.99. This Sporter model shares most of the capabilities of the $399.00 MagnetoSpeed V3, but at a much, much lower cost. Like all MagnetoSpeeds, the Sporter is easy to set up. Just attach the unit to your barrel with a strap and toggle clamp. There is no need to go downrange to set up tripod and skyscreens, or run wires.
We’re impressed by the Sporter chrono (as are other shooters — this unit is selling out nationwide). Like the V3, the Sporter faithfully records shots, even in complete darkness. Shot strings are recorded digitally and can be transferred to a smart phone via MagnetoSpeed’s XFR accessory (and Apps).
What’s the downside? The manufacturer says the Sporter is limited to 1″-max diameter barrels. In actuality, it can go a bit bigger than that. We have used it successfully on a 1.15″ straight contour barrel — but “your mileage may vary”. Second, the manufacturer says the new Sporter is NOT designed for use with airguns or shotguns. We have tested the original MagnetoSpeed with air rifles and it successfully recorded .177 and .22 pellet velocities, once we adjusted the sensitivity.
This Video Shows How to Use the Magnetospeed Sporter Display
Here is the XFR Device that allows Sporter and V3 chronos to work with smartphone Apps:
With MagnetoSpeed’s $24.99 XFR adapter and associated Apps, you can download your current shot series from Sporter and V3 chrono displays to an Android or iOS device. Once synced, users can rename the current shot series, delete irrelevant shots, email the data, reconfigure the display settings (units and sensitivity level), and clear the display’s current series.
Barrel nut system allows “Pre-Fit” barrel installation on a Remington action. CLICK photo to zoom.
REMAGE Project Report by Bill, Rifleshooter.com Editor
Installing a new barrel on your Remington 700 (especially without a lathe) may seem like a daunting task, but thanks to companies like McGowen Precision Barrels, there are easier alternatives. By adopting a Savage-style barrel nut on a 1 1/16″ thread for a Remington 700 receiver, pre-chambered (aka “pre-fit”) barrels can be easily swapped with just a few hand tools. This system is sometimes called a REMAGE conversion (for “REMington savAGE”).
The existing barrel is simply removed from the action (normally the hardest part) and the new barrel is screwed on with the Go Gauge in place. The barrel nut is tightened against the action, headspace verified with the Go Gauge, and you are off to the range. It takes all of the machine work out of the barreling process. Note: the barrel nut has a slightly larger diameter and some stocks may require minor inletting. Also if you are shooting fired brass from another rifle with the same chambering, you should FL-size the brass before loading it for your new pre-fit barrel.
Bill has been a serious shooter for over 20 years. A former Marine Corps Sergeant, he’s competed and placed in High Power Rifle, ISPC, USPSA, IDPA, 3-Gun, F-Class, and precision rifle disciplines. In addition to being an NRA-certified firearms instructor and range officer, Bill has hunted big game in North America, South America, and Africa. Bill writes extensively about gunsmithing, precision rifles, and the shooting sports on his blog, Rifleshooter.com.
Ever heard of the Canadian Rangers, an element of the Canadian Armed Forces (CAF) Reserve? Founded in 1947, the Rangers serve as the CAF’s eyes and ears in sparsely-settled northern and coastal areas of Canada. The Rangers cover the remote frontiers, performing public safety as well as security duties. For their entire history, the Canadian Rangers have always used a compact model of the Lee-Enfield No. 4. But that’s about to change…
Stirring Rapid-Fire Demonstration by Canadian Rangers
The Rangers have decided to replace their beloved (but antiquated) Lee-Enfields for something more advanced — the Tikka T3 Compact Tactical Rifle (CTR) in .308 Winchester.
Canadian Ranger Model Tikka Compact Tactical Rifle Features:
1. Barrel, Bolt, and Action made by Colt Canada under license from SAKO.
2. Larger bolt handle and enlarged trigger guard to accommodate gloved hands.
3. Protected front and rear iron sights.
4. Laminated stock in unique gray/orange or red colour with Ranger Crest.
5. Two-stage trigger with three-position safety.
The first 125 prototypes have been delivered to the Rangers for field testing. Feedback from the Rangers will be incorporated in the final production rifles. The contract calls for 6500+ production rifles to be delivered to the Rangers by end of 2018.
In addition to the rifle, the package will include a custom-molded Pelican hard transport case, plus a soft transport case (outfitted with sling and cleaning kit). Both hard case and soft case feature the Canadian Ranger Crest.
TekMat.com sells a wide selection of printed rubber mats used for gun cleaning and servicing. These mats are made from wetsuit-like neoprene sandwiched between fabric layers. One side of each mat is printed with an exploded diagram of a particular pistol, rifle, or shotgun. The 17″ x 11″ Handgun mats cost $13.99. Long Gun mats measure 36″x12″ and cost $24.99. Most mats are black, but some of the mats are offered in gray and/or Olive Drab.
The July 8th (Wednesday night) episode of Shooting USA features the 1874 Sharps rifle, a lever-action breech-loader favored by plains buffalo hunters. Christian Sharps patented his signature rifle design in 1848. The Sharps Model 1874 was an updated version, chambered for metallic cartridges. According to firearms historian/author Garry James, the Sharps rifle “came in all sorts of different calibers from .40 all the way up to .50, and jillions of different case lengths and styles and configurations”.
Sharps rifles have enjoyed a new-found notoriety, thanks to Hollywood. Tom Selleck starred as Matthew Quigley in the hit movie Quigley Down-Under. In a famous scene (watch below), Quigley used his 1874 Sharps to hit a wooden bucket at very long range*. In this movie clip, Selleck explains the 45-110 cartridge, the rifle’s double-set trigger, and the Vernier rear sight. (45-110 refers to .45 caliber and case capacity of 110 grains of black powder).
The Sharps rifles used in the movie were made by Shiloh Rifle company (Powder River Rifle Company). There were actually three (3) Sharps rifles made for the movie. One went to the NRA’s National Firearms Museum while another was raffled off to support NRA shooting programs. The headline photo shows the third rifle, Selleck’s favorite, which the actor retained for some years until deciding to sell it. This third rifle (with spare barrel and associated items) were sold at auction in 2008.
* Based on the way the movie is edited, we figure the bucket is placed at about 800 yards. A typical speed for a horse galloping is 35 mph, and the horse ran (with rider holding bucket) for 46.5 seconds (0.775 minutes). To calculate yardage, divide 35 by 60 to get miles per minute, times 0.775 for distance traveled over time. Then multiply by 1760, the number of yards in a mile. That gives us 795.66 yards.
While many of us now favor digital photography over “old-fashioned” 35mm film, don’t toss those old 35mm film canisters, especially the clear Fuji-type with secure snap-in lids. Small plastic film canisters have a multitude of uses for the shooter and reloader.
Here Are Things You Can Do with Plastic Film Canisters:
1. If you weigh powder charges after throwing them with a manual powder dispenser, throw the charges first into a film canister and then use that to drop the powder into the measuring pan on your scale. The canister will catch every kernel of powder. If you throw charges directly into a weighing pan, powder can sometimes bounce out. Using the film canister will help keep spilled powder off your loading bench and floor.
2. Store extra sets of foam ear-plugs in the canister. You never want to be without ear protection. This editor has four film canisters filled with plugs. Two go in the range kit, one goes in the car’s glove compartment, and a second stays in a lock box I use to transport pistols. This way I never find myself at the range without ear protection.
On July 20th, the CMP M1 Carbine Match will take place as part of the CMP Games and National Trophy Matches held annually at Camp Perry, Ohio. Designed as a lightweight (5.2-lb) combat rifle, the M1 Carbine can be surprisingly accurate (with a good barrel and proper bedding). Over 6.5 million of these compact semi-auto rifles were built, and many are still used today in CMP-sponsored target-shooting competitions. Chambered for the .30 Carbine round, the M1 Carbine shoots a 110-grain bullet at approximately 1970 fps through an 18″ barrel. The light weight and low recoil of the M1 Carbine make it fun to shoot. In the video below, legendary competitive shooter Jerry Miculek shows just how much fun you can have with an M1 Carbine. Jerry shows the little rifle’s capabilities in rapid fire. Jerry also talks about the history of the M1 Carbine and its variants.
Many tactical shooters have adopted the .260 Remington as an alternative to the heavier-recoiling .308 Winchester. The .260 Rem has also performed well in the hands of long-range High Power shooters such as SSG Sherri Jo Gallagher, past National High Power Champion. The .260 Remington is basically the .308 Win necked down to .264 (6.5 mm) caliber. It can launch very high-BC 130-142 grain projectiles at impressive velocities. The ballistics of the .260 Rem allow it to shoot flatter, with less wind drift, than typical .308 Win loads.
For fans of the .260 Remington, very high-quality factory ammo is now available. ABM Ammo, a division of Berger Bullets just announced that it will produce two varieties of .260 Remington ammo.
ABM’s 260 Remington 140gr Berger Match Hybrid Target ammo is designed for class-leading ballistic and superior accuracy. Using the highest-BC 6.5 mm caliber bullet offered by Berger, the 140gr Hybrid, this load features less wind deflection and more energy on target than the competition. ABM claims that this Match Hybrid ammo is “unrivaled as a long-range 260 Remington factory ammo option.” Since it pushes a higher-BC bullet than other .260 Rem factory ammo, we’d have to agree with that statement.
Performance based on a 26″ barrel and sea level conditions.
Mission Ready .260 Rem OTM Tactical Load for Mag-Fed Rifles
ABM Ammo also offers .260 Rem factory ammo loaded with the NEW 130gr AR Hybrid bullet. The .260 Rem 130gr Berger Match AR Hybrid OTM Tactical load is optimized for the AR-10 platform or any magazine-fed rifle. Berger’s 130gr AR Hybrid bullet offers a 0.290 G7 BC. That’s very close to the 0.317 BC of the longer 140gr Hybrid. This, combined with a 2847 FPS muzzle velocity, provides excellent performance in a shorter COAL that feeds perfectly from box magazines.
In fact, if you run the ballistics (using JBM) using ABM’s published MVs, you’ll find that you give up nothing with the shorter bullet. At 600 yards, the 130gr “Mission Ready” load has 78.8″ (12.5 MOA) of drop. By comparison, the “Match Ready” load with 140-grainers has 80.3″ (12.8) MOA of drop at 600 Yards (That’s not a mistake — the smaller bullet has LESS drop because it has a higher MV to start.) At 1000 yards, the “Mission Ready” load is virtually identical to the “Match Ready” load: The 130gr ammo has 304.6″ (29.1 MOA) of drop at 1000 vs 303.4″ (29.0 MOA) for the 140gr ammo at the same distance. (These calculations are based on standard conditions at sea level, with ABM supplied MVs.)
Because the ballistics are so close, you may want to try both loads in your .260 Rem rifle, even if you single-load and are not restricted by mag length. Some barrels may have a preference for one bullet over the other.
Product Tip from EdLongRange. We welcome reader submissions.
We know our readers are curious about the new Tipped MatchKings (TMKs) introduced by Sierra Bullets this year. Our friend Bill at Rifleshooter.com got hold of some of the .30-Cal 175-grain TMKs and tested them in his .308 Win rifle. He found the bullets were very consistent in weight. As for bearing surface, the SD was fairly low (.002″), but measurements varied from 0.400″ to 0.407″. Seven-thousandths extreme spread is more than we like to see, as it may affect accuracy. Therefore we recommend you sort by bearing surface length before loading these in match rounds.
