Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









January 4th, 2016

Bargain Finder 16: AccurateShooter’s Deals of the Week

Accurateshooter Bargain Finder Deals of Week

At the request of our readers, we have launched a “Deals of the Week” feature. Every Monday morning we offer our Bargain Selections. Here are some of the best deals on hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

1. 6mmAR.com — Easy-Change Front Bag-Rider for ARs

Whitley AR bag-rider easy change sled front

Here’s a great product from our friend Robert Whitley at 6mmAR.com. This new device is a 3″-wide, flat-bottomed, front bag-rider that mounts to your AR in seconds, without tools. The bag-rider (aka “sled”) really works — stabilizing your AR when shooting from a front pedestal rest. We recommend using the front sled during load development and whenever shooting from the bench. The bag-rider attaches to your AR’s handguard with a Velcro strap, indexing on the bipod stud. Right now the Easy-Change Bag-Rider has an introductory price of $55.00. If you own an AR, you should get one.

2. Target Sports — Federal .22 LR Ammo, 325 Rounds for $24.90

Federal Rimfire Ammo Special  bulk discount

Need good quality rimfire ammo at a low price? This TargetSportsUSA.com deal — 325 rounds for $24.90 — is a very good value. We’re pleased to see rimfire ammo prices become affordable again. Purchases are limited to five (5) 325-round boxes per customer. This is better than most “bulk-box” rimfire ammo. Another good deal right now is the Federal AutoMatch Bulk Pack, 325 rounds for $20.99 at Natchez Shooters Supply (but you are limited to two boxes).

3. Precision Reloading — Forster 2-Die Sets with Ultra Seater

Forster Benchrest Dies Reloading Sale Precision Ultra

Precision Reloading has Forster two-die reloading sets on clearance now. For $75-$80 per set you can get a precision full-length sizing die plus an Ultra micrometer-top seater. These are good dies — your Editor uses these very same dies for my .223 Rem reloading. Die sets for numerous popular chamberings are on sale now including: 220 Swift, 222 Rem, 22 PPC, 6mmx45, 6mm PPC, 6mm Rem, 243 WSSM, 257 Roberts, 25 WSSM, 7mm BR Rem, 280 Rem, 7mm WSM, 7×57 Mauser, 7mm RUM, 303 British, 30-378 Wby and more.

4. Home Depot — 72″ Wood Workbench for $70.25

Folding Wood Work Bench Home Deport Reloading

This patented Home Depot workbench assembles in a few minutes. Simply unfold the legs, pop in the shelf, and you are ready to start your project. Made from Premium 2×4 Hemlock fastened with glue and screws, this workbench is a great value. The bench (72″ wide x 35″ high x 22″ deep) can easily be stored when not in use. NOTE: The wood is unfinished (can be painted or stained).

5. CDNN Sports — 1911-Type .22 LR Target Pistol

GSG German model 1911 .22LR Rimfire pistol handgun

Everyone should have an accurate .22 LR target pistol. This German-made GSG 1911 22LR pistol shares the look, feel, and ergonomics of J.M. Browning’s classic model 1911 so it’s good for cross-training. We’ve tried this pistol and the trigger is pretty darn good — though don’t expect it be be as nice as a S&W Model 41. But consider that the GSG costs just $249.99. By contrast, MSRP on a new Model 41 is a steep $1369.00. For cross-training and target work the GSG is a very good value.

6. Stocky’s Stocks — Composite Stock with Bedding Block

Stocky's Stocks Composite V-block stock

Here’s a killer deal on a versatile Stocky’s Long Range Stock with aluminum V-block bedding system. For just $199.99, order this for Rem/Rem Clone long actions or short actions, with either narrow or wide (varmint/tactical) barrel channel. This would be a good choice for a varmint rifle. This is also offered with a matte black, tan, or olive baked-on textured finish for $229.97.

7. Natchez — Nikon Hunting Scopes on Close-out

Nikon Camo Scope Hunting sale Natchez

Natchez Shooters Supplies is running a big sale on Nikon optics with Camo finishes. Prices have been reduced as much as 43%. If you’re looking for an inexpensive, name-brand optic for your hunting or varmint rifle, check out these Nikon bargains. This scopes all carry full Nikon factory warranty.

8. Amazon – Frankford Arsenal Master Tumbler Kit

Master tumbler reloading kit Frankford Arsenal

This Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $64.40 with free shipping, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish.

Permalink Hot Deals, Optics No Comments »
January 4th, 2016

Updated Hodgdon and IMR Relative Burn Rate Chart

Hey guys, you’ll probably want to download this new Powder Burn Rate Chart issued by Hodgdon/IMR. This new table shows the latest IMR powders including the Enduron series (IMR 4166, 4451, 4955, 7977), shown in green below. This chart provides useful information for all hand-loaders. When doing load development, and testing one powder versus another, it’s generally wise to choose propellants that share the same relative burn rate, as least for starters. NOTE: Hodgdon powders are shown in blue, while IMR standard powders are shown in yellow. DOWNLOAD Chart HERE.


NEW POWDER BURN RATE TABLE from IMRPowder.com

Hodgdon IMR Winchester Burn Rate Powder speed table relative table chart

CLICK HERE to Download Chart as PDF File.

Story find by EdLongrange. We welcome reader submissions.
Permalink Bullets, Brass, Ammo, Reloading 5 Comments »
January 4th, 2016

Why Carbide Mandrels Work Better for Neck-Turning

If you have ever turned a large quantity of case-necks using power assist, you know that a carbide mandrel can make the job go easier, with better end results. In our experience, when using carbide mandrels (as opposed to ordinary steel), the cases move more smoothly with less heat build-up. Pat Reagin of PMA Tool explains why carbide neck-turning mandrels work better:

Carbide offers several advantages over conventional steel and stainless steel when making any tooling, specifically neck-turning mandrels:

Dimensional Stability — Carbide maintains its dimensions indefinitely during heating and cooling. This eliminates the need to allow the mandrel time to cool every few cases.

Coefficient of Friction and Wear-Resistance — Carbide exhibits a low coefficient of friction value as compared to all steels and wears up to 100 times longer. This reduces (but does not eliminate) the amount of lubricant required.

Galling Resistance — Carbide has exceptional resistance to galling and welding at the surface. This basically eliminates the chance of getting a case stuck on a mandrel due to insufficient lubrication.

Given the benefits of carbide neck-turner mandrels, you may be asking “where can I get one?” Sinclair Int’l offers carbide mandrels for Sinclair neck-turners for $49.99, in a full range of calibers: 17, 20, 22, 6mm, 25, 6.5mm, 270, 30, and 338.

PMA Tools Carbide neck turning mandrel neck turner$49.95 Carbide Mandrels from PMA Tool
PMA Tools now also offers carbide mandrels in a full variety of sizes. At $49.95 each, PMA’s carbide mandrels are priced competitively with Sinclair’s mandrels. PMA offers carbide mandrels in .17, .20, .22, 6mm, 6.5mm, 7mm and .30-caliber. These will work with Sinclair Int’l and 21st Century neck-turners, as well as PMA neck-turners. PMA tells us: “We now have carbide neck-turning mandrels in stock. These mandrels are made with high-tech CNC grinding-machinery, and should give you excellent results. We hope to be add other larger-caliber carbide mandrels to our lineup in the future.”

Permalink Bullets, Brass, Ammo, New Product, Reloading 7 Comments »