Here is an interesting project by one of our Forum members. Martin C. (aka “Killick”) modified an Anschutz 1411 Match 54 rimfire prone stock to become a comfortable, great-tracking F-Class Open Division Stock. No Killick didn’t sacrifice a perfectly good rimfire rifle for this project — he bought the Anschutz stock by itself on eBay, then transformed it…
Killick explains: “This project started about seven years ago. I bought the Anschutz prone stock on eBay and whittled it a bit into a Palma rifle with a Barnard action and block and a Doan Trevor cheek piece and scope rail. Then about two years ago I decided to re-task the stock/action assembly into an F-Open rig. With more whittling, gluing, sanding, body fillering, sanding, filling, sanding, more sanding…and sanding, forming, priming, sanding, painting, waiting, painting, painting…painting and before you know it, Bob’s your uncle.”
Here is the eBay-sourced Anschutz 1411 stock, with new high-gloss blue finish, as initially modified for use in Killick’s centerfire Palma rifle. Looks nice!
Next step was the addition of a 3″-wide wood fore-end for F-Open duties with front rest:
Almost done here… just needs priming and final painting:
Here is Killick’s completed F-Open rifle with its much-modified Anschutz stock now finished in fire-engine red lacquer. This image shows the detail of the grip and customized cheekpiece.
We’ve used these Defender Flip Caps on varmint rifles and they work great — and having your ballistics dope inside the flip cap is brilliant. The E-10 eyepiece Flip Cap is “stretchable” to fit eyepieces with outer diameters of 40-46 mm (1.57-1.81″)*. The caps for the front objective come in a variety of sizes from 24mm to 56mm. The spring-loaded E10 eyepiece cap offers three stop positions: The first is the vertical position, which will put your optional dope disk “front and center” for easy viewing. The second position is 45° back from vertical and the third is at 90° from vertical, laying flat back.
Introduced last year, the Vortex Defender Flip Cap is already a “best seller” on Amazon.com. Most purchasers have been quite happy with this product, which have proven very durable. Here is a typical review: “I’ve used scope caps from different manufacturers but these are by far the best! The fact that they can be stretched to fit eyepieces of varying size puts them over the top. Besides the fact that they are indestructible.”
Make Your Own Custom Dope Disk
Vortex Dope Disks cost $9.99. These are truly “custom” — you enter your own ballistics data on the Vortex Website to create an insert that fits inside a Vortex E-10 eyepiece flip cap. Disks are made from a durable plastic, custom laser-engraved with user-specific ballistics data. Choose single-column, two-column, or reticle-style display (shown above), and select the font size (big fonts help older eyes). CLICK HERE for Dope Disk Data Entry Page.
This video explains how to create a Dope Disk:
*Note: The E-10 eyepiece cap sleeve may cover the in/out eyepiece focus adjustment on some scopes, so you should set that adjustment before installing the cap.
Share the post "Vortex Flip-Up Scope Caps with Dope Disk"
Are you a safe hunter? Go through this checklist to find out. The National Shooting Sports Foundation (NSSF) has created a helpful Safety Checklist for hunters. This Hunting Safety Checklist was produced as part of the NSSF’s “Hunt S.A.F.E.” campaign which encourages hunters (and all firearm owners) to secure their firearms when not in use, and to focus on safe firearm handling and storage. The Hunting Safey Checklist helps hunters follow good, safe practices in the field and at home.
“Hunting is a time-honored tradition for many Americans, and the hunting season brings a wave of excitement and activity for all enthusiasts,” said NSSF President and CEO Steve Sanetti. “It’s also a good time of year to remind firearm owners about … safe and responsible gun handling and storage.”
This unique Savage 99 rifle was created for Joseph V. Falcon, President of Savage Arms in the 1950s.
Presentation Engraved Savage 99 Rifle
When you run the company, you get some pretty nice stuff — in this case you get what may be the most elegant Savage ever made.
This rifle was created for Joseph V. Falcon, who served as President of Savage Arms in 1956. This highly embellished Savage 99 lever-action rifle is chambered for the .300 Savage cartridge. It features deluxe checkering and gold inlays. This presentation-grade rifle boast deep relief engraving with a golden elk on one side of the receiver and a stalking cougar on the other. This rifle was given to Joseph V. Falcon from his friends at Savage in December of 1967. Falcon later donated the rifle to the NRA. This impressive model 99 is currently showcased at the NRA National Firearms Museum in Fairfax, Virginia.
Savage 99 Quick History
Arthur Savage invented the first “hammerless” lever action rifle with the entire mechanism enclosed in a steel receiver. This rifle featured a rotary magazine with a unique counter that displayed the number of rounds remaining. The Model 99, as it became known, was the gun that launched a company. There is an interesting history of the company’s logo which features an Indian chief in feather head-dress. In 1919, Chief Lame Deer approached Arthur Savage to purchase lever-action rifles for his tribe’s reservation and the two men struck a deal. In return for discounted rifles and support, Savage received the tribe’s endorsement. By virtue of that association, Arthur Savage added the Indian head symbol to the company’s commercial trademark and letterhead.
Share the post "The Company President’s Rifle — Fanciest Savage Ever?"
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
You don’t need to spend big bucks for an effective spotting scope to view mirage. You can get the Kowa TSN-501 Angled Spotting Scope for just $349.00 from B&H Photo. This is a super-compact scope with 50mm objective and built-in 20-40X eyepiece. Though relatively new, the small, light-weight TSN-501 can perform basic spotting tasks effectively. This doesn’t have the resolution of the $1500+ spotters but this is fine for viewing mirage and shot markers. Put the money you save into barrels and bullets.
2. Grafs.com — Caldwell Long Range Target Cam System, $329.99
Forum members have purchased this Caldwell Target Cam System and they’ve found that it works reliably, providing a clear signal to any WiFi-enabled mobile device (smartphone, iPad, Laptop). One member specifically tested the unit at 1000 yards and it functioned fine. NOTE: This system does NOT have a zoom camera lens, so you need to position the camera within 10 yards or so of the target. But if you place it to the side a bit, this shouldn’t be a problem. This system comes with a nice, fitted carrying case that holds camera, transceivers, antennas, and stands. You get a very capable system for under $330.00. Graf’s offers free shipping after a flat $7.95 handling charge.
3. WikiArms — Savage A17 Target with Wood Stock, $465.99
The heavy-barrel, wood thumbhole-stock version of Savage’s popular A17 rifle is probably our favorite factory 17 HMR. That means it’s our first choice for 100- to 200-yard varmint busting. Right now you can get this A17 Target model with laminated thumbhole stock for under $470.00. Trip’s Defense sells it for $465.99, while Classic Firearms has the A17 Target for $469.99. NOTE: If these dealers are sold out, find other vendors HERE: WikiArms A17 Thumbhole Sellers.
These A17 Target models feature 22″ button-rifled heavy barrels and Boyds’ gray wood laminate stocks. As with all A17s, the wood-stocked Target models feature a case-hardened receiver, chromed bolt with large charging handle, 10-round rotary mag, and user-adjustable AccuTrigger. These rifles boast a delayed blowback action for reliable semi-auto cycling with the 17 HMR cartridge.
4. Natchez — Rock Chucker Supreme Reloading Kit, $249.99
Everything you see above can be yours for just $249.99, a great deal. Right now, Natchez is selling the Rock Chucker Supreme Master Reloading Kit for $249.99. That’s a great deal considering all the hardware you get. Heck, the Rock Chucker press alone is worth $150.00+. Considering all you get, this is a heck of a deal. The Natchez price is $70-$90 cheaper than many other vendors. For example, MidwayUSA’s price is $329.99 for this same kit!
Need quality .22 LR rimfire ammo at an affordable price? Consider Norma. Most folks think Norma only produces centerfire ammo and cartridge brass. As a result, people haven’t been looking for Norma rimfire ammo. Their loss is your gain. Accurate, reliable Norma .22 LR ammunition is in-stock right now at leading online vendors. This is good quality ammo, made in Europe. Bullets.com has Norma Tac-22 ammo in stock at $4.75 per 50-rd box (SKU: BL7819). In addition, Bullets.com offers Norma Match-22 ammunition at $6.50 per 50-rd box (SKU: BL11887).
6. Grafs.com — Hornady Auto Charge, $179.99 + Free Range Bag
Here’s an excellent promo from our friends at Grafs.com. Hornady’s versatile Lock-N-Load Auto Charge™ Powder Scale and Dispenser is on sale for $179.99. And now for a limited time you get a FREE deluxe range bag ($43.99 value) with the purchase of the Hornady Scale/Dispenser. This is a good unit with a nice keypad. NOTE: You can also get the FREE Range Bag when you buy the Hornady Case Prep Center at Grafs.com for $419.99. That’s pretty pricey — getting Scale/Dispenser with the Range Bag is the better deal.
We use 1″-diameter Target Spots for sight-in and practice at 100-300 yards. These bright red/orange self-adhesive dots are easy to see. At 100 yards the high-contrast black diamond centers provide precise aiming points. We found this 10-pack of target spots on Amazon at a rock-bottom price. You get 630 total stick-on dots for just $9.65 with FREE Shipping. You can also get 360 Birchwood Casey 1″ dots from Midsouth for just $3.15, but shipping is extra. If you’re already ordering something from Midsouth, you may want to add the dots to your order.
8. Home Depot — 72″ Wood Workbench for $77.62
This patented Home Depot workbench assembles in a few minutes. Simply unfold the legs, pop in the shelf, and you are ready to start your project. Made from Premium 2×4 Hemlock fastened with glue and screws, this workbench is a great value. The bench (72″ wide x 35″ high x 22″ deep) can easily be stored when not in use. NOTE: The wood is unfinished (can be painted or stained).
Share the post "Bargain Finder 107: AccurateShooter’s Deals of the Week"
From time to time, we all encounter a primer that doesn’t go off. It’s normal to attribute the problem to a bad primer. But sometimes there are other explanations. George S., one of our Forum members, experienced a couple failures to fire, but he learned that the issue was his priming TOOL, not his primers. Here’s what George told us. There’s a lesson to be learned:
“I had issues with CCI 450s when I had my first 6BR barreled. I had probably three or four out of 20 rounds that failed to fire. the primers were dented but didn’t fire. I called CCI since I had bought a case of them. The tech was decent enough but had the audacity to tell me I was not seating the primers all the way in the pocket. I proceeded to let him know I had been reloading longer than he had been alive and I knew how to seat a primer.
Turns out that I did and I didn’t! I was using the RCBS primer tool I had used for years and the primers felt just fine to me. I finally decided to check the tool and since I had a new one I took the seating pins out and measured them. The seating pin on the tool I had been using for years was shorter by a few thousandths! I then used the pin from the new primer tool and darned if the primers that didn’t seat down to the bottom of the cup.
I switched to a K&M primer tool for seating the CCI primers and have not had a problem since. It was the combination of harder cup and lack of proper seating. I did call the CCI tech back and apologized for being an idiot.”
Another Forum member witnessed a problem cause by misuse of a priming tool: “I did … see a failure to fire on a Rem 9 1/2 primer only a week ago. That was in the new Rem muzzleloader that uses a primed case to ignite the pellets. After watching the muzzleloader’s owner seat his primers, I believe that it was operator error not the primer. He was seating the primer and then squeezing the priming tool so hard that his hands hurt after a few. We got that corrected.”
Share the post "TECH Tip: Check Your Primer Tools If You Have Primer Problems"
Here is some serious Sunday “gun glamour” from the folks at Star Shooter Precision, a bipod-builder and stock-maker based in Montreal, Canada. This stunning .308 Win F-TR rifle features a carbon-wrapped Star Shooter stock, angle-adjustable tubular bag-rider, star-shaped escutcheons, and a Kelbly Panda action. Up front is Star Shooter’s signature lightweight bipod.
Click Each Image for Large, Full-Screen Version
About the Rifle Builders Star Shooter Precision is a company located on the south shore of Montreal, Quebec, Canada. Fred Harvey is the designer. Fred says: “Our goal is to perfect the art of competition shooting the best we can with our custom bipods. The Star Shooter bipod is designed for shooters in F-Class competition, varmint hunting, load testing, tactical shooting and sighting in rifles.”
Share the post "F-TR Glamour Gun — Canadian Carbon-Wrapped Stunner"
Looking for authentic U.S. Military Specification Standards (MIL-STD) for gun parts, safety products, or other hardware? Log on to EverySpec.com. This website provides FREE access to the complete archive of U.S. Government spec sheets and technical manuals. You can quickly access and download thousands of public domain U.S. Government documents. For example, we searched for “Picatinny” and came up with MIL-STD-1913 “Dimensioning of Accessory Mounting Rail for Small Arms Weapons”. With one click we downloaded the file as a PDF. Then a search for “M118″ yielded the engineering drawing for 7.62×51 M118 LR Match ammo. Pretty cool.
Using EverySpec.com is fast and easy. And everything you find and save is FREE. Search as often as you like — there are no limits on search requests or downloads. You can either search by keyword, or Federal Supply Class Code (FSC). CLICK HERE for a complete list of FSCs for all products.
Here are FSCs for a few common product types. Keep in mind that there are hundreds of other FSCs — for everything from Office Supplies (FSC 7510) to Nuclear Projectiles (FSC 1110).
1095 — Miscellaneous Weapons (incl. Knives) 1240 — Optical Sighting and Ranging Equipment 1395 — Miscellaneous Ammunition (incl. Small Arms) 3455 — Cutting Tools for Machine Tools 6140 — Batteries, Rechargeable 6230 — Electric Portable Lighting Equipment 7640 — Maps, Atlases, Charts and Globes 8340 — Tents and Tarpaulins 8405 — Outerwear, Mens
Credit Gunsmith Thomas ‘Speedy’ Gonzales for finding this resource. Thanks Speedy!
Share the post "Download Official U.S. Military Specification Standards (MIL-STD)"
“A big congratulations to Bob Mead (1582-68X), who utterly destroyed the competition in tricky wind conditions to take the Gold.” — Jay Christopherson, 2017 F-Open Nationals Second Place.
In this 15-minute video, Team Lapua’s Erik Cortina interviews Robert Mead, the 2017 LR F-Open Champion. Robert (Bob) discusses his wind reading techniques with Erik, and the newly-crowned F-Open Champ explains how to set up a reliable wind zero. Bob also discusses cartridge choices in F-Open. He admits the straight .284 may be the tightest grouping 7mm cartridge, but he has used the 7mm RSAUM for a decade now. He believes the RSAUM may the best cartridge for 1,000 yards in 7mm, all things considered (grouping ability, ballistics): “To me it’s a light magnum, it’s capable of high speed, yet burns less powder than your regular magnums. [But] it’s a finicky cartridge — you’ve got to do a fair amount of load development.”
Every serious F-Class competitor should watch this video start to finish:
Credit Erik Cortina for video and the photo of Robert Mead with trophy above.
Share the post "F-Open Nat’l Champ Talks Wind Reading and Cartridge Choice"
You may not know this, but Creedmoor Sports sells very high-quality loaded ammunition crafted with top-quality bullets and premium-grade Lapua brass for .308 Win and .30-06. We have friends who have shot some of this ammo in .223 Rem and .308 Win, and it is very impressive. The 6.5 Creedmoor ammo is capable of winning PRS matches outright. Creedmoor’s rifle cartridge match ammunition includes:
.223 Rem: (55gr FMJ, 68gr HPBT, 69gr TMK, 75gr HPBT, 77gr TMK) 6.5 Creedmoor: (140gr HPBT Hornady, 140gr HPBT Nosler, 142gr Sierra — all Hornady brass) .308 Win: (155gr, 167gr, 168gr Sierra, 175gr all in Lapua Brass; also precision hunting in other brass) .30-06 Springfield: (167gr Lapua Scenar HPBT in Lapua Brass)
Use Coupon Code CS929 to receive Free Ground Shipping on orders over $99!
Oh, the beauty of it — all that Lapua brass. From Finland with love….
What does 13,005 pounds (6.5 tons) of powder look like? That would last most reloaders a few seasons. Hoarders, eat your hearts out….
Share the post "Excellent Factory Ammo Offered by Creedmoor Sports"
Sometime it’s fun to take a break from competition and just go out plinking with family members. During plinking sessions, you can try out a variety of non-standard targets — these “fun targets” create more interest, especially with youngsters. Here are six FREE fun targets from the NSSF. These (and other examples) can be downloaded as PDF files for easy, scalable printing. Shown are six fun targets: Alien, Goofy Gopher, Orange Clays, Fish in a Barrel, Cans on Fence, or Bacon Xs. To download any of the targets, right click and “Save Link As”. You can also click on the six targets and they should open up in most browsers if you have the PDF reader installed. Have Fun! MORE Targets HERE.
Orange Clays
Fish in a Barrel
Cans on Fence
Bacon Xs
Download FREE Bullseye Targets Too
The NSSF also offers conventional bullseye-style targets on the NSSF Targets page. Here are two, high-contrast printable targets. With five (5) bullseyes per sheet, these are good for load development. They also work well at short range for pistol shooting.
Share the post "Family Fun — Free Printable PDF Fun Targets from NSSF"
British Lee-Enfield Model SHT’22/IV Rifle, courtesy www.iCollector.com.
Our friend Dennis Santiago was a technical advisor for History Channel’s Top SHOT TV show. One of the notable Top Shot episodes involved the “Mad Minute”, a marksmanship drill practiced by the British Army in the decades preceding World War I. Dennis observed that the Top Shot competitors didn’t fare too well in their “Mad Minute” attempts, not scoring many hits in the alloted one-minute time period. That prompted Dennis to give it a try himself — seeing how many hits he could score in one minute with an authentic Lee-Enfield rifle. So, a while back, Dennis ran the drill at a range in California.
Dennis, an active high power rifle competitor and instructor, enjoyed his “Mad Minute” exercise, though he assures us that this takes practice to perfect. Dennis tells us: “Here is a ‘Mad Minute’ drill, done using a period correct Lee-Enfield (SMLE) No.1 Mk III rifle and Mk VII ammo. I got to the Queen’s Regulations (15 hits in one minute) on the second run and put a good group on the target at 200 yards. This is ‘jolly good fun’ to do every once in a while. This is ‘living history’ — experiencing a skill from a time when the sun never set on the British Empire.”
“Mad Minute” was a pre-World War I term used by British Army riflemen during training at the Hythe School of Musketry to describe scoring a minimum of 15 hits onto a 12″ round target at 300 yards within one minute using a bolt-action rifle (usually a Lee-Enfield or Lee-Metford rifle). It was not uncommon during the First World War for riflemen to greatly exceed this score. The record, set in 1914 by Sergeant Instructor Alfred Snoxall, was 38 hits. (From WikiPedia.)
Want to See More “Mad Minute” Action with a Modern Tubegun?
In 2012, Gary Eliseo ran a “Mad Minute” exercise using a modern, .308 Win Eliseo RTM Tubegun of his own making. Gary ended up with 24 hits on a bull target set at 300 yards. (Gary actually had 25 hits in 25 rounds fired, but the last round hit just after the 60-second time period expired.) Note how Gary pulls the trigger with the middle finger of his right hand. This allows him to work the bolt faster, using his thumb and index finger. CLICK HERE for Eliseo Tubegun Mad Minute story.
Watch Gary Elesio Shoot the ‘Mad Minute’ (Starts at 4:47 on Video)
NOTE: In an interesting coincidence, Dennis Santiago was actually in the pits pulling targets for Gary during Eliseo’s 2012 “Mad Minute” exercise.
History of the Mad Minute Commentary by Laurie Holland
The original military requirement of the “Mad Minute” saw the soldier ready to fire with a round in the chamber, nine in the magazine, safety on. This course of fire is still followed by the GB Historic Breechloading Arms Association and other bodies in their recreated “Mad Minute” competitions.
The first 10 would go quickly, but reloads were critical, this not done by a magazine change as Gary did with the RTM or in a modern tactical or semi-auto rifle, but through slick use of ‘chargers’. It is this aspect which fouls so many of my colleagues up as it is very easy to cause a jam and a large part of 60 seconds can go in sorting it out!
Charger clips were selected for those that just held the rounds firmly enough to stop then falling out, were sand-papered and polished with a stove / fireplace polish called ‘Zebrite’ so that the rimmed rounds would slip through the clips like corn through a goose.
If you’re unfamiliar with the cock-on-closing Enfield action, it seems clumsy. With intensive practice it is very smooth and can be operated incredibly quickly. The trick is to whip the bolt back onto its stop and initiate a rebound movement that takes it and the cartridge well into the chamber thereby reducing the effort required to close the bolt and chamber the round.
Share the post "Mad Minute Marksmanship — The One-Minute Lee-Enfield Drill"