Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









October 13th, 2018

Machine Gun Shoot This Weekend at Knob Creek in Kentucky

knob creek KY Kentucky Machine gun shoot

Twice a year, select-fire fans head to the Knob Creek Gun Range in West Point, Kentucky, for the nation’s largest Machine Gun Shoot. A bi-annual event, the Machine Gun Shoot is typically held on the second weekend of both April and October. The latest Machine Gun Shoot is happening RIGHT NOW. It started on Friday, October 12th and runs all weekend through Sunday the 14th. The highlight of every Machine Gun Shoot is the Saturday Night Shoot, where scores of guns send regular and tracer bullets down-range. An estimated 1.25 million rounds will be expended during the October Night Shoot.

Participants are machine gun dealers, collectors and enthusiasts from all over the country. The Machine Gun Shoot itself consists of three days of machine gun shooting, dealer displays, shooting competitions and the spectacular Saturday Night Shoot. Participants shoot at a wide variety of used appliances, abandoned vehicles, and barrels of fuel with pyrotechnic charges attached. The pyrotechnic charges are set off by bullet impacts, creating large mushroom clouds and fireballs. With the tracers and explosive fireballs, this is an amazing experience. Check out the video:

Click Triangle to Watch Knob Creek Machine Gun Shoot Video (Warning: Very Loud Audio)

A few seasons back, Top Shot Season 4 Champ Chris Cheng was on hand to record the firepower. Chris writes: “About an hour before dark, folks are out on the range setting up all sorts of explosives while a crowd builds, anxiously awaiting what we all know is coming. The lights go out, and the next thing you know machine guns are going off for almost 20 straight minutes. This year’s October 2013 edition did not disappoint. Check out the video below — other than the beginning, my favorite part is at the 5:50 mark [when a Mini-Gun opens fire from the right].”

knob creek KY Kentucky Machine gun shoot

Photos of Knob Creek Gun Range, West Point
This photo of Knob Creek Gun Range is courtesy of TripAdvisor.

Permalink - Videos, Bullets, Brass, Ammo, News No Comments »
October 13th, 2018

SAKO Factory Tour — Visiting Production Facility in Finland

Beretta Factory SAKO Tour Finland

Beretta, makers of fine shotguns, rifles, and pistols, also owns Finnish rifle-maker SAKO. In this article, which first appeared in the Beretta Blog, hunting guide Mia Anstine writes about her visit to the Sako factory and her live-fire shooting test to secure her hunting permit. CLICK HERE for full story.

Visiting the SAKO Factory in Finland, by Mia Anstine
What a joy to wake up in Finland and prepare for a tour of Sako. I enjoyed a European breakfast with a view of downtown Helsinki. Shortly I joined the hosts and writer’s group, and we boarded the bus for a ride to Riihimaki, to the manufacturing facility.

Sako built its original manufacturing facility during World War I. To this day they still utilize the original buildings but have also grown over the years to include larger production areas and updated equipment.

Video shows Sako Rifle-Making and Hunting in Finland’s Backcountry (worth watching):

Beretta Holding’s acquisition of the Sako company brought additional opportunity for growth. The company added state-of-the-art machinery which has aided in increased production. However, they’ve still maintained their signature quality-built products by keeping the human element integrated throughout the production line.

After a quick tour of the Sako facility, we headed to the shooting range. We shot a number or Sako and Tikka rifles, but first, we sighted in our hunting rifles in preparation for a brown bear and moose hunt. I would be hunting with a Sako model 85 Hunter chambered in 9.3 mm. (Editor: For fans of this big 0.366 caliber, Sako offers both 9.3x62mm and 9.3x66mm Sako chamberings).

Beretta Factory SAKO Tour Finland

Hunters Must Pass Marksmanship Tests
To hunt bear in Finland, you must first pass a hunting test as well as shooting test. The timed, live-fire event [requires] five rounds in the kill zone of a brown bear at 100 meters. Of course, the ever-courteous Finns had ladies go first, so I felt more than a bit of pressure, and I know I shot a bit faster than necessary. Regardless, I cycled rounds and passed with ease.

Next, we headed to a different bay at the shooting range where we experienced the hunting test from days of old. In this test, we shot from standing position at a moose target. First, we shot three rounds in the kill zone, from 100 meters, and then three at the moose target as it raced by, from right-to-left and left-to-right, at 20 kilometers per hour. While this test is no longer required, it was a pleasure to try our hands at it.

CLICK HERE for full story on BERETTA BLOG

Permalink - Videos, Gear Review, Gunsmithing 3 Comments »
October 13th, 2018

$100 Rebate on Burris Eliminator III LaserScope

Burris Eliminator rebate

The Burris Eliminator III is an advanced electro-optical device that combines magnified optics with a built-in laser rangefinder and micro-processor. With the push of a button the Eliminator III ranges your target. Then the micro-processor “brain” instantly calculates the required holdover for that distance, and displays a red dot on the reticle. Simply put the red dot on the center of your target and pull the trigger.

Now through December 31, 2018 you can save $100.00 on the purchase of the 4-16x50mm Burris Eliminator III LaserScope. That’s a significant savings on a proven product. We think this LaserScope is particularly handy for varmint hunters working a large prairie dog field, with critters near and far, at ranges from 100 out to 800 yards. With the Eliminator, you can range a P-Dog mound instantly, then just place the red dot on the animal and you’re good. No fussing with drop charts or scope clicks. Of course you still have to make a wind call, but the Eliminator also helps with your hold-offs. The handy X96 reticle has horizontal hold dots, and a digital display shows how many dots to hold off for a 10 mph crosswind with your cartridge.

Burris Eliminator rebateHow To Get $100 Rebate
Purchase a Burris Eliminator III 4-16x50mm LaserScope (Item # 200116 or 200119) and get a $100 Rebate. (Other models do not qualify).

To receive the Burris $100 Mail-in Rebate, you must submit three things: 1) Proof of Purchase; 2) Original UPC Code from product box; and 3) Mail-In Rebate Form. Send all three items to this address:

$100 Eliminator Rebate
Dept #BS18-5028
P.O. Box 472
Scottsdale, AZ 85252-0472

Permalink Hot Deals, Hunting/Varminting, Optics No Comments »