Berger Releases NEW 6.5mm 144gr LR Hybrid Target Bullet
A hot new 6.5mm match bullet has arrived — the Berger 144-grain Hybrid. This new 144-grainer, officially called the Long Range Hybrid Target (LRHT), features a formed meplat (bullet tip) for more consistent Ballistic Coefficient (BC). With its new MRT (Meplat Reduction Technology) nose, the new 144gr LRHT boasts a high-BC, “jump-tolerant” hybrid ogive profile along with an extremely consistent BC. In fact, Doppler Radar testing confirms less than 1% BC variation from bullet to bullet. While a high BC is of course desirable for competitive shooting, shot-to-shot BC consistency is most critical when engaging targets to 600 yards and beyond. The 144’s BC numbers are very impressive for a 6.5mm bullet: 0.655 G1 and 0.336 G7.
AccurateShooter.com plans to test these new 144s very soon — we’ve sent some to championship-level shooters. The new 144s should prove very popular. These bullets are optimized for leading accuracy and long-range cartridges such as 6.5mm Creedmoor, 6.5×47 Lapua, Remington .260, 6.5-284, and 6.5 PRC among others. NOTE: Berger states that the new 144gr LRHT offers the same stability factor as Berger’s 140gr Hybrid Target. Accordingly, the new 144-grainer can be considered a “direct replacement” for the proven Berger 140gr Hybrids. And YES, the 144gr LRHT will work in 1:8″-twist barrels.
“The 6.5mm 144 Grain LRHTs offer several advantages”, said Bryan Litz, Berger’s Chief Ballistician. “The ultra-sleek profile provides a higher Ballistic Coefficient (BC) resulting in less wind drift at all ranges. The proprietary MRT manufacturing process also provides a higher and more consistent BC, important for reducing dispersion at long range.”
“During our initial Doppler Radar testing we concluded that the new 6.5mm 144gr Long Range Hybrid Target bullets consistently displayed ballistic coefficients with standard deviations far less than one percent of the documented average” reports Garett Stoddard, Berger Engineer. “Driven at muzzle velocities typical for today’s popular 6.5mm cartridges, that variation translates to only a 2″ vertical group dispersion at 1000 yards. [This demonstrates] the advantage of the Meplat Reduction Technology, as well as the importance of ballistic coefficient consistency.”
The new 6.5mm 144 Grain Long Range Hybrid Target is the latest offering in Berger’s impressive Long Range Hybrid Target (LRHT) product line, which also includes .224-Cal and 6mm projectiles:
Meplat Reduction Technology for More Consistent BCs
Berger’s new 6.5mm 144gr Long Range Hybrid Target is designed to provide Benchrest, F-Class, and PRS enthusiasts a class-leading level of precision and consistency. Utilizing advanced/proprietary manufacturing processes, Berger’s Meplat Reduction Technology™ (MRT™) System applies controlled pressure along the projectile nose, producing a homogeneous and repeatable bullet profile. This yields what Berger claims are “the industry’s most consistent Ballistic Coefficients (BC)”.
The Berger 6.5mm 144 Grain Long Range Hybrid Target™ Bullets will be available very soon at authorized Berger Retailers. Use the Berger Dealer Locator to find a store near you.
Similar Posts:
- Berger Releases New 6mm 109gr LR Hybrid Target Bullet
- New Berger 7mm 190 Grain Long Range Hybrid Target Bullet
- New 6.5mm Ultra-High BC Bullet — Berger 153.5 Grain LRHT
- New High-BC 85.5 grain .224-Caliber Bullet from Berger
- New Berger Loaded Ammo with LR Hybrid Target Bullets
Share the post "Berger Releases NEW 6.5mm 144gr LR Hybrid Target Bullet"
Tags: Berger Bullets, Long Range Hybrid Target Bullet, LRHT, Meplat Reduction, MRT, New Berger Bullets
What’s next?
A heavy 7mm LRHT …
Nose length on this new 144 hybrid is 0.742. Nose length on existing 140 hybrid is 0.768. The improvement in BC comes from 4 extra grains mass and a more pointed MRT meplat. Could we have squeezed a few more BC points at no extra cost if we’d had the slightly sleeker 140 nose on this new 144? Maybe 0.662 BC instead of 0.655?
It would probably then require a 1:7.5 twist instead of the 1:8. This no doubt drove that decision in the design.
Wanting to stay within a certain twist rate for marketing reasons is a valid tradeoff.