Sunday GunDay: Trio of Tack-Driving Thumbhole Varmint Rifles
Mr. Smith’s Tack-Driving Thumbhole Trio
What is it they say? “Can’t have too much of a good thing?” We’ll in the case of Sam Smith of Wisconsin, that goes for beautiful wood-stocked thumbhole rifles that shoot like the blazes. This week we feature a troika of thumbholes, all smithed and stocked by Richard Franklin of Richard’s Custom Rifles (Richard is now retired but still offers DVDs). Not content with a single caliber or twist, Sam commissioned three different chamberings and barrel twist rates.
First, in Fiddleback Walnut — a 6PPC Walking Varminter
The most elegant of the three thumbholes is this handsome .261″-neck 6PPC. The blue-printed Rem 700 action is pillar-bedded in a highly-figured stock of laminated Curley Fiddleback Walnut, in Richard’s #004 pattern. Richard uses three sections of wood bonded together so the outside looks like a single piece of Walnut.
The lead photo at top, and the image at right show more details of this rifle. The grain really takes on a rich color in sunlight, with the Tiger-stripe figure showing brilliantly through the clearcoat. Believe it or not, Sam doesn’t even consider this one of his best-looking rifles. Sam tells us, “these three thumbhole stocks are not even close to the prettiest guns Richard has built for me–you should see the Maple ones he did for me–they are unbelievable.”
Sam tells us the gun’s 1:14″-twist Krieger barrel is a hummer — it regularly shoots one-holers at 100 yards. Sam has even logged some groups in the Zeros with the gun–awesome accuracy for a varmint rifle/Sam tells us that, using VV N133 and 58gr V-max bullets, this gun is absolutely deadly on prairie dogs out to 500 yards. (SEE: One-hole Sample Target.)
Rifle #2 — Cherry and Walnut Together in a 6mm Rem Improved
When more knock-down power or more distant targets are in order, Sam pulls out his 6mm Rem Improved 1:12″-twist thumbhole Varminter. Like the other two guns, this features a pillar-bedded Remington 700 action and Krieger barrel. While the 6mm AI’s #004 stock shares the same shape and form as the 6PPC above, it is much more colorful, employing a seven-layer laminate in Cherry and Walnut, covered with multiple coats of automotive clear-coat. One of Sam’s favorite varminters, this rifle sees more range use than his 6PPC because “the PPC is so accurate I want to keep the round count down.” That’s not to say the 6mm Improved is any slouch in the accuracy department. Using VV N160 and 75gr V-max bullets, the gun averages in the 2s and 3s. The best group to date was .189″ with the 87gr V-Max (See V-Max Target below). Chalk that up to another superbly accurate Krieger barrel combined with outstanding chambering work by Richard.
Rifle #3 — Fast-Twist 6.5-284 with Benchrest Forearm
Last but not least is Sam’s handsome 6.5-284 (below), also in a laminated Walnut and Cherry stock. The Krieger barrel is a Heavy Varmint contour, with an 8-twist and .290″ neck. This gun hasn’t been shot much yet, but during initial testing it grouped in the mid-threes with 53gr of H4831 and 142gr Sierra MKs. You’ll note the stock is a bit different than the other two guns–this is the #005 stock pattern, which boasts a 3″-wide, flat forearm. It is identical to the #004 from the recoil lug rearward. Sam tells us that the #005 tracks better than the #004, though he prefers the rounded forearm of the #004 for a walking varminter.
Sam’s all-time favorite stock pattern in Richard’s #007, a roll-over comb design with conventional wrist and Cooper-style Beavertail forearm. Sam has a similar Maple #007 that he says is “even nicer than the gun in the picture.”
Nice Wood? You Ain’t Seen Nothin’ Yet!
After this trio of thumbhole rifles, Sam commissioned two more rifles — a matched pair in 6mm BR Norma and 6PPC, done up in absolutely amazing 500 year-old Turkish Walnut, sourced from a one-of-a-kind 48″ diameter Burl. What does a piece of wood like this cost? Trust us, if you have to ask, you couldn’t possibly afford it. Let us just say these are some of the most spectacularly figured blanks ever shipped from Turkey and they are priced accordingly. Here’s a preview, taken right before Richard bonded the first stock together. The lower two pieces look lighter because of the flash angle but the upper section more accurately shows how all three pieces appear in natural light. “Wow” is right!
Richard Franklin is Now Retired in Montana
The last we heard, gunsmith Richard Franklin was enjoying his retirement years up in Montana. On RichardsCustomRifles.com Richard posted: “I built fine custom rifles and for many years. I was the first stock maker to laminate woods such high-grade walnut, fiddleback maple and other fancy woods. I designed my own ideas into my patterns and carved, finished, pillar bedded thousands of stocks on the rifles I built. My most popular stock pattern was my Model 11 thumbhole.
I love building rifles but my health has forced me to retire and to take time to smell the roses. I made many great videos on how to build rifles and have been selling them for many years. They are still in great demand.” CLICK HERE to check out Richard’s DVDs about rifle building and varmint hunting.
