Main photo from NRAILA.org. The NRA supports Second Amendment rights.
Article by AccurateShooter.com Editor-in-Chief
In the last month, a half-dozen acquaintences have asked me about getting a handgun for self-defense at home and while traveling. What is notable is that all of these persons have never owned a handgun before. Moreover, two of the six are pretty staunch liberals who, prior to 2020, thought the Second Amendment was a “historical anachronism” that should be repealed. With the widespread riots and “defund the police” activism, that has all changed. These six people now realize that there are real threats in current society and they may find themselves in a situation where armed self-defense is the only option.
Try Before You Buy — Find a Gun with Good Reliability, Controls, and Ergonomics
These six persons asked for recommendations on handguns. I explained that there was no one “best gun” for every person. I also stressed the importance of training, and of trying various handguns to compare ergonomics, weight, balance, sight arrangement, controls, and trigger pull.
Folks, ergonomics and grip shape DO make a difference. I used to give pistol instruction at a local club. I provided four 9x19mm pistols: Beretta 92, HK USP, SIG P226, and Glock 19. Two-thirds of the students shot best with the SIG P226, and only 10% shot best with the Glock 19. The majority of the students kept “pulling shots” with the Glock, even with a lot of practice. Not so with the SIG P226. I attribute that to lower center of gravity and more ergonomic grip shape/angle.
Caliber Choice — Factors to Consider
We are not going into the long caliber debate today. I have owned semi-auto pistols in .380 ACP, 9x19mm Parabellum, .40 SW, .45 ACP. Each cartridge has its pros and cons. But for a first-time gun owner, looking for a self-defense round, I will recommend the 9mm. It will have noticeably less muzzle flip than the .40 SW, but still carries much more energy than a .380 ACP. I love the .45 ACP for target shooting, but it is more expensive for practice, and there are fewer pistol options. For revolvers, the .357 Magnum is a great defense round, but some of the smaller carry pistols are limited to .38 Special.
Semi-Auto 9mm Carry Gun Recommendation: S&W M&P9 Shield EZ
I have considered a wide range of 9mm carry pistols from Glock, Ruger, SIG Sauer, Smith & Wesson, Taurus, and Walther. There are many very good pistols out there. But what I recommended to my acquaintances was the new Smith & Wesson M&P9 Shield EZ 9mm. This gun features a back-strap grip safety and is offered with or without thumb safety. There is also a M&P9 EZ model with built-in Red Laser.
Here are the key reasons I recommended the M&P9 EZ 9mm pistol:
1. Good Accuracy and Balance
2. Integral Grip Safety and optional Thumb Safety
3. Good Ergonomics: 18-degree grip angle for natural point of aim
4. Reasonable 4.5-lb Trigger Pull (some other pistols are 7+ pounds*)
5. Easy-to-Rack Slide
6. Take-Down does NOT require trigger pull (unlike Glock)
7. Availability of built-in laser or accessory rail-mount lights/lasers
8. Good Price: $479.00 base MSRP with $399.99 street price
9. Outstanding Smith & Wesson reliability, warranty, and customer service
This detailed, authoritative M&P9 EZ video review also covers the M&P .380 Shield EZ:
Small Deep Concealment Carry Gun Recommendation — S&W Model 638
I am a big fan of revolvers. I have probably put more rounds through my S&W Model 617 .22 LR revolver than all my other handguns combined. Revolvers are accurate, solidly built, and the shorter-barrel models conceal easily. In addition, revolvers are inherently simple — they can be put into action without racking a slide or dealing with mag latches and the like. I’ve actually seen trainees drop magazines on the ground when they were drawing pistols from holsters — they hit the mag release by accident. If this can happen in a class, it can happen in a threat situation.
For concealed carry, I recommend the Smith & Wesson Model 638 revolver. IMPORTANT — the Model 638 has a hammer so it can be shot single-action OR double-action. Having the single-action option is great when a slower, more precisely-aimed shot is needed. Unique among S&W revolvers, the 638’s hammer is shielded — this way the hammer will not snag when the gun is carried in purse or pocket.
As for accuracy, you will be surprised with the Model 638 with good self-defense ammo. Despite the short site radius, the little 1.875″-barreled Model 638 will easily outshoot most self-loading .380 ACPs. With my 638 Airweight, slow-fire, I can put all five rounds inside 2″ at 20 feet with ease.
* Some folks may criticize this S&W Shield 9mm EZ because it lacks a heavy 7-9 pound trigger pull. The thinking is that a heavy DA pull is better for novices. We understand the argument. However, in the real world we found that novices shot much worse with very heavy trigger pulls, even after much training. We believe a 4.5-lb pull is moderate and will actually allow better accuracy for the average shooter. A typical Glock pull-weight is about 5.5-6 pounds.
To help celebrate National Shooting Sports Month (NSSM), rifle and gear manufacturers are offering big prize packages — the Gearbox Giveaways. Enter to win rifles, pistols, ammo, and other valuable prizes. Many of the Gearbox packages are worth over $3000 with the most valuable package worth over $4700! Enter as many of the Gearbox Giveaways as you choose. You can’t win if you don’t enter.
You’ll find all the Gearbox Giveaways on the NSSF website. Shown below are 12 current Gearbox Giveaways ranked in order of value — starting with the most valuable prize package. Below each photo is a link for the ENTRY PAGE for that gearbox item. Good luck!
Do you use factory ammo in your hunting rifles? Perhaps you buy bulk centerfire ammo for your AR15 or varmint rifle. Then this book is for you.
If you ever shoot factory ammo, you should consider getting Ammo & Ballistics 6. This resource book lists over 2,600 different loads for 200+ cartridge types from .17 Mach 2 up to .700 Nitro Express, including the most popular centerfire and rimfire cartridges (both rifle and handgun). In this updated-for-2020 Sixth Edition, there are over 3,000 tables covering virtually every caliber and every load for all commercially-loaded hunting ammunition sold in the USA. Tables include velocity, energy, wind drift, bullet drop, and ballistic coefficients up to 1,000 yards.
Ammo & Ballistics 6 helps you select ammo for a hunt — quickly compare the velocity and knock-down power of various commercial ammo. This book can help you choose a caliber/chambering for your next hunting rig.
Verified Book Purchaser Reviews
“Outstanding reference guide for shooters and ballistic enthusiasts alike. Has data on velocity, energy delivered, Taylor KO index, windage and elevation on numerous loadings for hundreds of [cartridge types]. Each cartridge has all dimensions labeled (i.e rim, case length, neck, etc.), and has an informative description of the cartridges history/relevance.” — S. Step, 2017
“Great heaps of data! This volume has pages and pages of new data for .22LR like the hot Velocitor, and also on the .22 WMR from 30 grains up into the 50s. Most importantly there is lots of range data, drop, windage, kinetic energy, etc. — Terrific reference guide….” — E. Svanoe
Ammo & Ballistics 6 contains data and illustrations on virtually every sporting cartridge sold in the USA. This 2020 Edition covers 200-plus cartridge types from .17 Mach 2 up to .700 Nitro Express.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
Cabela’s — Bergara B-14 HMR Rifle, $949.99
⏺ Good Ergonomics, Works for Hunting plus PRS Factory Class
Bergara rifles combine accuracy, good ergonomics, and smooth function at a lower costs than many other brands. If you’re looking for a new rifle that’s capable of hunting, PRS competition, or target shooting, check out the Bergara B-14 HMR now on sale. Available in 6.5 Creedmoor for $949.99, the B-14 HMR features a quality synthetic stock with adjustable cheek-piece (scope not included). The 24″ barrel has a threaded muzzle, so you can add a muzzle brake or suppressor. Order this online from Cabelas.com and it ships for free to your local Cabela’s store.
2. Precision Reloading — Lapua Brass and Scenar Bullets Rebate
⏺ SAVE 10% with Rebate Program for Lapua Brass and Bullets
Here is a great deal on great cartridge brass and bullets. Right now Lapua is offering a Lapua Summer Savings Rebate on cartridge brass and Scenar bullets. With this rebate, you can then save 10% on your purchases up to $200 max. Precision Reloading has a great selection of Lapua brass and bullets. Of course Lapua brass is the “choice of champions” and we have found the Scenars to be extremely consistent in weight and base-to-ogive measurements. The Lapua Rebate Program covers purchases through August 31, 2020. You can also buy from Midsouth Shooters and Grafs.com.
3. Palmetto State Armory — Rossi RS22 Rimfire Rifle, $109.99
⏺ Reliable, with very impressive accuracy — awesome deal under $110!
Looking for a very affordable first rifle for a young family member? Here’s one of the best low-cost options you can find among .22 LR rimfire rigs. The Rossi RS22 is a reliable, semi-auto rifle that comes equipped with barrel-mounted iron/fiber optic sights. There are also dovetails on the receiver for mounting scope rings. The RS22 also takes most Mossberg 702 magazines. The Rossi RS22 features an 18″ free-floating barrel, adjustable fiber optic sights and a synthetic Monte Carlo stock. For added accuracy, 3/8″ dovetail mounts allow the mounting of a scope or other optic. Overall weight, without scope, is 4.1 pounds.
⏺ Take advantage of Browning Bucks Rebates up to $100
Browning makes excellent rifles, shotguns, and pistols. The Browning Buckmark is one of our favorite .22 LR rimfire pistol, and Browning Citori shotguns are renown for their build quality and performance. Right now CDNN Sports is running special SALES on a wide selection of Browning Firearms. And now through the end of September, you can can Browning Bucks back — up to $100.00 on Citori shotguns. The rifle rebate is $50, while the pistol rebate is $25.00. Here’s a change to get major savings on quality guns.
5. Bruno Shooters Supply — Massive BAT Action Sale
⏺ Superb BAT custom actions, over 80 on sale at $100 Off
BAT actions have an amazing reputation and are available in more configurations that just about any other action on the market. Head over to Bruno Shooters Supply and choose from over 80 BAT Actions on sale. Many models are avaiable, all discounted $100 off Bruno’s normal pricing. This BAT promo gets you $100 closer to that elite custom rifle you’ve always wanted.
⏺ Fine new press and all you need to reload — just add dies and components
The RCBS Rebel Master Reloading Kit features the new Rebel Press plus Uniflow III powder measure, pocket digital scale, hand priming trickler, powder funnel, fold-up hex key set, deburring tool, brush set, case loading block, spray lube, and a Speer Loading Manual. Midsouth’s Rebel Kit sale price is $379.99. But note — this Kit qualifies for a $75.00 RCBS rebate, lowering your net cost to $304.99 — a killer deal. The RCBS Summer Rebate provides $50 back with $100-$249.99 purchase; $75 back with $250-$399.99 purchase; and $100 back with a purchase of $400 or more.
7. Midsouth Shooters — Norma .22 LR Match Ammo, $65.65/500
⏺ Great accuracy for the price; excellent for gun games and NRL22
Midsouth has 500-round bricks of Norma .22 LR 40gr Elite Match-22 ammo for $65.65 (just 13 cents a round). The Match-22 LR series is known to deliver great performance. Norma tests each lot of .22 LR ammunition and then when a particularly accurate batch is identified, Norma places them into the Match category. This Match-22 ammo was produced for biathlon and target competition. It also an excellent choice for NRL22 tactical rimfire matches. At just $6.56 for a 50-count box, this is a great deal.
If you’re looking for a decent, under-$300 spotting scope, check out this Athlon for $149.99 at MidwayUSA. That price, which includes a tripod, is 25% off the regular $199.99 price. No this won’t compete with a $1500 Kowa, but it offers solid performance for the price. A verified purchaser posted: “Great value for the money. For $150 I don’t think you can go wrong. I am also not going to be worried about dropping it or getting it dirty. I had looked at scopes in the $800 range and decided that for me, there just wasn’t another $700 of value with the other scopes”. Another owner posted: “A Swaro it ain’t. But for the price nothing I’ve ever seen even comes close to touching it. Good sharp optics and simple to use.”
Here’s a very good mat for just $27.99. This NcStar Vism shooting mat boast decent padding, and reinforced areas for elbows and knees. Full dimensions are: 69″ Long x 35″ Wide. This mat has straps for pre-loading your bipod. When you’re done simply fold in the edges, roll it up into a compact 19.50″ W x 8.50″ H package — the size of a sleeping bag. You can pay twice as much for a shooting mat and not get much more quality. This mat has earned 85% Five-Star buyer ratings on Amazon.
The 6mm GT (aka 6GT) cartridge was conceived as a “bigger Dasher” for PRS and NRL competition. The 6mm GT’s creators wanted 6mm Dasher accuracy and moderate recoil delivered via a cartridge with a slightly longer case body for better mag-feeding, longer neck for seating flexibility, and more moderate pressures. So far the 6GT has performed very well in PRS competition. Today’s story is a bit different — this is about an experiment — running a 6mm GT in an F-TR type rifle. Understand that, under current NRA rules, you may only shoot .223 Rem (5.56×45) or .308 Win (7.62×51), in official, sanctioned F-TR competition, but the 6GT is fine for F-Open. Mike McCasland wanted to see the potential of the cartridge for long-range target shooting, so he put a 6mm GT-chambered Bartlein barrel on a nice custom rifle with McMillan XIT stock and Kelbly F-Class Panda action. The results were impressive.
6mm GT — New Cartridge with Multi-Discipline Potential
Story by Mike McCasland, Texas Precision
The 6mm GT began garnering attention within PRS circles in early 2019. It promised to shoot 105-110gr 6mm bullets at 2950-3000 FPS, yet not suffer from mag-feed issues sometimes found with 6mmBR variants such as the 6 Dasher, 6BRX, and 6BRA. Moreover, since it burned less powder, the 6mm GT promised increased barrel life compared to the 6mm Creedmoor or 6XC. The 6mm GT case size should still work with the accurate powders in the Varget burn-range. I found the 6GT also worked great with H4350.
As someone who aspired to building a repeater and jumping into the PRS game, and had a spare F-TR rifle sitting around, I thought it would be fun to build up a 6mm GT to see if there was any merit to the hype. My smith, Wes Ripley of RIP Precision in Texas, builds a lot of PRS rigs, and already had the reamer on hand (a 0.120″ freebore variant).
Whidden Gunworks had some 6mm GT FL bushing die kits in stock, so I figured why not see what all the fuss was about? At the very least I could play around with the 6mm GT in F-Open Class at local club matches to see how it compared to the 6BRA, 6 Dasher, and other popular 6mm cartridges.
How the Project Got Started with Backup F-TR Rig
My 6mm GT build really started as a project spawned purely from COVID-19 Isolation boredom. This rifle primarily serves as a backup F-TR gun, and it had been relegated to performing some load development on .308 barrels, so I could spin new ones on my main match rifle. The only problem was, I had run out of .308 barrels that needed load development. So, I basically had an ideal test platform just collecting dust in the safe. All I needed was a 6mm GT-chambered barrel, since (like the 6mmBR) the 6mm GT works in a short action with a .308 Win-sized bolt-face.
6mm GT Rifle Specifications:
Action: Kelbly Panda F-Class SA RB/RP
Stock: McMillan XIT with RAD 2A
Barrel: 30″ 5R Bartlein 1:7.5″-Twist, HV Contour
Scope: Vortex Golden Eagle 15-60x52mm
Trigger: Jewell Benchrest, about 2 ounces
Bipod: Phoenix Precision
About the 6mm GT Cartridge
BRASS — The first thing you’ll find is cartridge brass choices for the 6mmGT are rather limited currently. At present, the only commercial options are Hornady and Alpha Munitions. For the die-hard Lapua fans, you can technically make 6mm GT brass from 6.5×47 Lapua, however that process is very labor-intensive.
I have used both Hornady and Alpha brass in this rifle and haven’t noticed much difference between the two. I will say that my batch of Alpha brass was slightly softer than Alpha brass I’ve used in other calibers; you could feel a difference when neck turning cases. I’m unsure if that’s a batch issue, or something specific to their 6mm GT brass as a whole. As far as performance, there was little discernable difference. Oddly enough, the Hornady brass seemed to have slightly less case capacity than the Alpha; with most other cartridges it’s the other way around.
POWDERS — The 6mm GT was designed with Hodgdon Varget in mind, and that popular powder works exceedingly well in this platform. That said, the 6mm GT can work with a wide variety of powders, some yielding better performance than Varget.
I’ve tried a multitude of powders during my initial 6mm GT load development: Varget, Shooters World Precision, RL16, VV N140, H4350, and RL-15 to name a few. In my barrel, Hodgdon H4350 seems to deliver the best velocity/accuracy combination. SD and ES also seemed to be the lowest with H4350.
Load Development for the 6mm GT — Many Powders Tested
BULLETS — The most common 0.120″ freebore chamber allows for the majority of high-BC 6mm projectiles found in both F-Class and PRS. I had good luck with the pointed 107gr Sierra Match Kings (SMK), as well as the 110gr Hornady A-Tips in my rifle. For those looking to run the heavier 112-115 grain 6mm offerings, I believe GAP designed a 0.160″ freebore reamer that gets those bullets out of the neck/shoulder junction. Shown below is the 0.120″ freebore JGS reamer print:
SUMMARY — Good Cartridge with Much Potential
Generally speaking, I think the 6mm GT is a good little round. Some may not subscribe to this theory, but I believe some cartridges are inherently easier to tune than others. I’m not sure the 6mm GT is as easy-to-tune as a 6mmBR, 6 Dasher, or 6 BRA, but I don’t think it lags that far behind.
With relatively little trouble, I was able to find loads with both Varget and H4350 that would consistently shoot very well — 0.2 to 0.3 MOA. Moreover, I found the 6GT cartridge lives up to the velocity claims made by G.A. Precision. I was easily able to push the 110gr A-Tips to 2950 FPS, and the 107gr SMKs to low 3000 FPS range without any pressure signs, or unnecessary wear and tear on the brass.
As a fun test, I ran my 6mm GT rifle in a local 1000-yard F-Class match with the 110gr A-Tips, just to see just how well they would perform. Although wind conditions of the day and some E-Target issues prevented my 6mm GT rig from getting the better of the larger 7mm and .30-Cal rifles, the 6mm GT proved itself an accurate little round at distance. Here is a 1000-yard ShotMarker target:
After putting several hundred rounds through my 6mm GT rifle, I anticipate building another 6GT on a repeater action to give PRS a try. I think if you are looking for a dual-purpose rifle that can run tactical matches (with 100% feeding reliability), and can also be used for mid-range, F-Open Class competition, the 6mm GT would be a very good option.
About the author, Mike McCasland:
Mike McCasland is an avid shooter who competes regularly in F-Class matches. Based in Texas, Mike is the creator of the Texas Precision YouTube Channel. There you’ll find many videos covering reloading, gun projects, and marksmanship. Mike has done some notable product reviews including a comparison test of Micrometer Competition Seating Dies. To access Mike’s YouTube Channel, CLICK HERE.
.009” Group Record Stood for 40 Years
In 1973 Mac McMillan shot an amazing 100-yard, .009″ five-shot group in a benchrest match. The .009″ group was measured with a 60x microscope for verification. Mac McMillan shot the group using a handbuilt prototype McMillan rifle with an early McMillan stock.
Mac’s .009″ group was the “Holy Grail” of rifle accuracy. This .009″ record was considered by many to be unbreakable, a record that would “stand for all time”. Well, it took 40 years, but someone finally broke Mac’s record with an even smaller group. In 2013, Mike Stinnett shot a .0077″ five-shot group using a 30 Stewart, a .30 caliber wildcat based on the 6.5 Grendel. Stinnett’s NBRSA record .0077″ group now stands as the smallest 100-yard group ever shot in registered benchrest competition.*
Read About .0077″ group HERE.
Stinnett’s success doesn’t diminish the significance of Mac McMillan’s .009″ group in the history of benchrest competition. For four decades Mac’s group stood as the ultimate standard of rifle accuracy*. For those of you who have never seen Mac McMillan’s .009″ group, here it is, along with the NBRSA World Record certificate. The target now hangs in the McMillan Family Museum.
*Somebody else might claim a smaller group, but unless moving backers or electronic targets were used, it cannot be verified. Moving target backers are used at registered benchrest matches to ensure that five (5) shots are actually fired in each group. That eliminates any doubt.
Review by F-Class John
Walk the line at any F-Class or Benchrest match and you’ll see plenty of SEB rests — for good reason. SEB produces some of the most popular competition shooting rests available today. With their ease of use and smart design, it is no wonder why SEB rests are so popular. But as good as they are, there are ways SEB rests can be made even better — such as making them easier to align precisely to the target during set-up. It was while shooting with his SEB NEO one day that inventor, fabricator, and competitive F-Class shooter Rod Brakhage decided to make a better mouse trap — to improve the SEB series of rests. He identified aspects of the NEO/MAX rests and SEB Mini tripod rest that could be enhanced and he then set out to improve their already great performance.
This photo shows the new Rodzilla 5-Axis top installed on a SEB Mini tripod rest. There are also Rodzilla tops for the SEB NEO and MAX two-column front rests.
Nearly a year and countless prototypes later, Rod unveiled his new Rodzilla 5-Axis Top to a select group of shooters to test and it’s been a wild ride ever since. Best of all, his top is drilled and tapped so that it can be fitted to a SEB NEO, MAX, or Mini front rest without altering the rest base in any way. To make things easy, if you don’t want to install it yourself, you can send just the bridge from your NEO/MAX or top from a Mini and Rod will install the 5-Axis unit. You pay for the Rodzilla top, and Rod will install it for free. The Rodzilla NE0/MAX tops currently sell for $549.00, while the Rodzilla Mini top is $584.00.
Watch Video to See All Features of Rodzilla 5-Axis Rest Top:
Rodzilla Top Swivels Independently of Rest Base
The first thing Rod did was allow the top to swivel independently of the base. On a NEO this makes a HUGE difference because you can now set your rest down in the general direction of your target and make final adjustments once you’re down behind the gun. This is a huge departure from the normal procedure where you find yourself moving your NEO repeatedly until it’s just right. You can do the same thing on a Mini which is actually a nice feature despite the head already swiveling because you can now lock down the Mini head and make your final adjustments behind the gun as well. This is probably the feature that stood out the most to me when I first set it up. Being able to lock the front end down and get comfortable immediately behind the gun without having to get up again was a time-saver. This also left me feeling very confident in my gun alignment to the target.
Delrin Rollers on Side Guide Stock during Recoil
The second major innovation is the addition of Delrin rollers along the side. The unit has two easily adjustable jaws that each contain a set of rollers. These rollers allow for as much or little contact as you want along the sides of your stock and provide a smooth if not near frictionless experience whether during recoil (breakaway) or when returning the gun to battery. the departure from traditional sandbags on the side quite revolutionary, and yes it is legal under NRA rules. Current NRA High Power F-Class rules have no limits on what material contacts the sides of the stock. As someone who has owned a number of front rests and filled countless small sandbags this comes as a welcome relief! The Rodzilla’s rollers give me confidence that I’ll have consistent contact with the stock without the side bags constantly shifting and needing my attention during a match.
Small, Separate Sandbags Provide Consistent Contact at Any Gun Angle
Another major Rodzilla advancement is the design of the left and right sandbags. Conventional sandbags are stationary and oriented to the rest itself meaning that if you’re shooting uphill or downhill then you may not have stock contact with the full bag surface or the stock may be at a weird angle to the sandbag. Plus, with time, conventional front sand bags can form crowns or lumps that require attention. Those problems are solved with the Rodzilla’s tilting mini-sandbags. Rod’s sandbags are very small yet still meet NRA High Power guidelines as they are filled with sand and can be visibly deformed when pushed. But otherwise, they are unlike anything you’ve seen before. Each bag is mounted on a pivoting arm allowing the gun to always keep consistent contact with each bag regardless of the angle of your rest. This provides confidence that your stock is always riding on the same amount of sandbag no matter how the rest has been placed, or the ground angle relative to target.
CONCLUSION: The Rodzilla 5-Axis Top is a Game-Changer If you have a SEB Rest you will definitely want this…
The innovative design features of the Rodzilla 5-Axis Top make SEB rests work even better. The Rodzilla Top delivers an incredibly smooth and repeatable shooting experience. Recoil seems smoother, and it is easier to align the rest on target during set-up. If you own a SEB rest and are looking to make your set-up on the line easier and faster, have near-zero breakaway force on each shot, and have consistent follow-up shots to your point of aim, then give the Rodzilla 5-Axis Top a try.
This Video shows how to install the Rodzilla 5-Axis Top on SEB Mini tripod rest:
This Video shows how to install the Rodzilla 5-Axis Top on SEB NEO or MAX Rest
Sellier & Bellot is one of Europe’s older ammunition manufacturers, producing a wide variety of rifle and pistol ammo. The video below shows ammunition being made from start to finish, starting with raw materials. This is a fascinating video that is well worth watching. It shows some amazing machines in operation.
EDITOR: Guys, this really is an exceptional video that shows every aspect of production. I have watched dozens of videos about ammo making. This is definitely one of the BEST. Take the time to watch.
Based in Vlasim, Czech Republic, Sellier & Bellot was founded in August 5, 1825 by Louis Sellier, a German businessman of French lineage. His family were royalists who fled France during the French Revolution. Louis Sellier began manufacturing percussion caps for infantry firearms in a factory in Prague, Bohemia on the request of Francis I, the Emperor of Austria. Sellier was later joined by his countryman Jean Bellot.
Sellier & Bellot has also produced an interesting CGI video that shows what happens inside a rifle chamber and barrel when a cartridge fires can’t be seen by the naked eye (unless you are a Super-Hero with X-Ray vision). But now, with the help of 3D-style computer animation, you can see every stage in the process of a rifle round being fired.
In this X-Ray-style 3D animation illustrates the primer igniting, the propellant burning, and the bullet moving through the barrel. The video then shows how the bullet spins as it flies along its trajectory. Finally, this animation shows the bullet impacting ballistic gelatin. Watch the bullet mushroom and deform as it creates a “wound channel” in the gelatin.
Watch Video – Cartridge Ignition Sequence Starts at 1:45 Time-Mark
This month American Outdoor Brands Corporation (NASDAQ: AOBC) will officially split into two separate companies, with the Smith & Wesson gun business becoming a stand-alone enterprise again. This action will create two independent, publicly-traded companies: Smith & Wesson Brands, Inc. (encompassing the firearm business) and American Outdoor Brands, Inc. (encompassing the outdoor products and accessories business). AOBC’s board of directors previously approved the separation of its outdoor products and accessories business into an independent, publicly-traded company.
Smith & Wesson Brands will effect the separation through a spin-off whereby it will distribute 100 percent of the shares of American Outdoor Brands common stock to Smith & Wesson Brands’ stockholders of record as of the close of business on the record date of August 10, 2020 on a pro rata basis. The distribution of American Outdoor Brands’ shares is expected to be completed effective as of 12:01 a.m. Eastern Time on August 24, 2020, with Smith & Wesson Brands stockholders receiving one share of American Outdoor Brands common stock for every four shares of Smith & Wesson Brands stock.
Following the spin-off, American Outdoor Brands will be a separate publicly-traded company independent from Smith & Wesson Brands. Smith & Wesson Brands will not retain any American Outdoor Brands common stock. Smith & Wesson Brands will continue to be listed on NASDAQ under the symbol SWBI. American Outdoor Brands has received approval for the listing of its common stock on NASDAQ under the symbol AOUT.
Background of the American Outdoor Brands Conglomerate
In August 2016, Smith & Wesson Holding Corporation bought Crimson Trace, a laser-sight manufacturer, for $95 million and Taylor Brands, a tool and knife maker, for $85 million. In November of that same year, the company bought UST Brands, a survival equipment maker, for $32.3 million. And Smith & Wesson acquired Battenfeld Technologies in 2015 for $130.3 million. Smith & Wesson diversified from firearms into sporting goods and accessories in hopes of insulating Smith & Wesson from the stock price volatility caused by the unpredictability of the gun business. This culminated in the decision to change the company’s name to American Outdoor Brands Corporation. However, despite the diversification, in 2017, firearms still accounted for 86% of American Outdoor Brands’s revenues.
Post-Spinoff Brand Line-Ups for SWBI and AOUT
Smith & Wesson Brands (SWBI) will now become firearm-centric, selling guns under the Smith & Wesson, M&P, Thompson/Center, and Performance Center brands. In addition, we believe SWBI will continue to make and sell Gemtech suppressors.
American Outdoor Brands markets a large number of product brands, including Bog (bipods/tripods), Caldwell (shooting accessories), Crimson Trace (weapons lights), Frankford Arsenal (reloading tools). Listed below are the product lines American Outdoor Brands Inc. will continue to sell as the new, separate AOUT company. A significant percentage of these brands remain gun-centric:
Bog — Manufactures tripods and shooting rests
Caldwell — Manufactures targets and shooting rests
Crimson Trace — Flashlight, Weapon light, and aiming device manufacturer
Frankford Arsenal — Manufactures reloading tools
Golden Rod — Manufactures dehumidifiers and moisture sensors for safes and lock boxes
Hooyman — Manufactures Landscaping tools and portable power saws
Imperial — Manufactures fixed and folding blade knives
Lockdown — Manufactures gun safes, lock boxes, gun locks, and accessories
M&P Accessories — Manufactures firearm accessories
Old Timer — Manufactures fixed and folding blade knives as well as accessories
Schrade — Manufactures fixed and folding blade knives as well as accessories
Tipton — Manufactures firearm cleaning accessories
Uncle Henry — Manufactures fixed and folding blade knives as well as accessories
Wheeler Engineering — Manufactures gunsmithing tools
Bubba — Manufactures knives, tools, and accessories for fishing
Mark Smith Will Lead Smith & Wesson After Spin-Off
Upon successful completion of the spin-off, Mark Smith will become CEO of Smith & Wesson Brands, Inc.; Smith is currently the President of the Manufacturing Services Division of AOBC and supports all of its businesses. James Debney, current AOBC President and CEO, will lead the outdoor products and accessories company as CEO after the spin-off.
The Future of Smith & Wesson Brands, Inc. (Projections)
Headquartered in Springfield, Massachusetts, Smith & Wesson Brands, Inc. will continue its 168-year-old heritage of producing firearms (S&W was founded in 1852). This business’s handgun, long gun, and suppressor products are marketed under the Smith & Wesson®, M&P®, Performance Center®, Thompson/Center Arms™, and Gemtech® brands. Following the spin-off this month, Smith & Wesson Brands, Inc. is expected to generate revenue between $450 million and $500 million and adjusted EBITDAS between $90 million and $105 million in its first 12 months as an independent company.
* It is not clear whether Smith & Wesson Accessories and Thompson Center Accessories will be marketed under the same name after American Outdoor brands splits into two publicly-traded companies.
The state of New York, through NY Atty. General Letitia James, has filed suit against the NRA attacking actions by its leadership, claiming that funds were spent improperly. The purpose of the suit, said James, is “to dissolve the organization in its entirety”. This lawsuit originates from New York because the NRA is a New York-chartered organization. In a coordinated legal action, likewise motivated by partisan politics, District of Columbia Attorney General Karl Racine brought suit against the NRA Foundation, claiming the Foundation gave money to the NRA without proper oversight.
About the New York Lawsuit: The NY suit claims NRA CEO Wayne LaPierre, Wilson “Woody” Phillips (former NRA treasurer/CFO), Joshua Powell (former chief of staff) and John Frazer (corporate secretary/general counsel) diverted tens of millions of dollars for their personal benefit and enrichment. NY alleges that the “The NRA was serving as a personal piggy bank” for these four men.
About the DC Lawsuit: “Key to the D.C. complaint are a pair of $5 million loans in 2017 and 2018 from the Foundation to the Association. In addition to those loans, the suit alleges the Foundation paid millions in fees to the NRA with no oversight, essentially placing the NRA’s interests above its own. That is a violation of the Foundation’s articles of incorporation.” Source: The Shooting Wire, 8/7/2020.
The NRA Responds — And Files Suit for First Amendment Violations
LaPierre stated that the action by New York is “an unconstitutional, premeditated attack aiming to dismantle and destroy the NRA”. Immediately the NRA began to fight back, filing a countersuit on 8/6/2020 stated that the NY AG’s lawsuit has violated the NRA’s First Amendment rights. NRA President Carolyn Meadows called the NY lawsuit a “baseless, premeditated attack on our organization and the Second Amendment freedoms it fights to defend”.
Lawsuits filed against the NRA will be the major issue at the NRA Annual Meeting next month.
The National Shooting Sports Foundation issued a statement condemning the NY Atty. General’s politically-motivated scheme to dissolve the NRA:
“NSSF, the trade association for the firearm industry, is troubled by the politically-driven decision of New York Attorney General Letitia James to seek to dissolve the National Rifle Association, America’s oldest civil rights organization.
The lawsuit filed today by Attorney General James seeks to punish the over five million members of the National Rifle Association based on mere allegations of possible wrongdoing by a few individuals.
NSSF is deeply concerned about the apparent political agenda to silence the strongest voice in support of the Second Amendment ahead of the election in November.
This lawsuit, and one filed today by the District of Columbia Attorney General, should concern all Americans who cherish both the First and Second Amendments to our Constitution regardless of their views on what laws and regulations are appropriate to address the criminal misuse of firearms.”
As someone who aspired to building a repeater and jumping into the PRS game, and had a spare F-TR rifle sitting around, I thought it would be fun to build up a 6mm GT to see if there was any merit to the hype. My smith, Wes Ripley of 
BRASS — The first thing you’ll find is cartridge brass choices for the 6mmGT are rather limited currently. At present, the only commercial options are Hornady and 
SUMMARY — Good Cartridge with Much Potential
.009” Group Record Stood for 40 Years
“NSSF, the trade association for the firearm industry, is troubled by the politically-driven decision of New York Attorney General Letitia James to seek to dissolve the National Rifle Association, America’s oldest civil rights organization.
