Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









November 20th, 2020

New SAAMI Cartridges: 277 SIG FURY, 6.5 WBY RPM, 6.8 Western

.277 SIG Fury saami cartridge specification 80000 psi

The Sporting Arms and Ammunition Manufacturers’ Institute, Inc., (SAAMI), has announced the acceptance of three (3) new cartridges for SAAMI standardization: 1) 277 SIG FURY; 2) 6.5 Weatherby Rebated Precision Magnum (WBY RPM); 3) 6.8 Western. While the 277 SIG FURY was developed originally for the U.S. Military, it should serve well for hunters, as will the new 6.5 Weatherby RPM and 6.8 Western. SAAMI has standardized the dimensions, max pressures, and load specs for all these three new cartridges.

277 SIG FURY from SIG Sauer

Developed by SIG SAUER for the U.S. Military, the 277 SIG FURY boasts a SAAMI maximum average pressure of 80,000 psi, driving a 135-grain bullet to 3,000+ fps. That 80K PSI pressure is WAY higher than almost all other cartridge types. To achieve these high pressures, the 277 FURY uses a hybrid case with a brass body and harder alloy metal case head. This design allows the cartridge to run very high pressures. Dan Horner of SIG Sauer told us: “When the handloaders get hold of this brass, it will be a game-changer for sure”. We envision this cartridge could be necked down to 6.5 mm and it would dramatically out-perform the 6.5 Creedmoor. And yes the official name of the cartridge is all caps “277 SIG FURY”.

LINK: 277 SIG FURY official SAAMI Cartridge and Chamber Diagram (PDF)

.277 SIG Fury saami cartridge specfication 80000 psi

.277 SIG Fury saami cartridge specfication 80000 psi

6.5 Weatherby Rebated Precision Magnum

Developed by Weatherby, the 6.5 Weatherby Rebated Precision Magnum (WBY RPM) was introduced with a maximum average pressure of 65,000 psi, with a 140-grain bullet traveling at a velocity of 3,075 fps. The 6.5 WBY RPM offers signficantly higher velocities that most other 6.5mm cartridges, including the 6.5-284 and .265 Win Mag. SEE 6.5 Cartridge Comparison Table

LINK: 6.5 Weatherby RPM official SAAMI Cartridge and Chamber Diagram (PDF)

6.5 weatherby rebated precision magnum cartridge WBY RPM SAAMI

6.8 Western from Winchester

Developed by Olin Winchester, the 6.8 Western was introduced with a maximum average pressure of 65,000 psi, with a .277-caliber 175-grain bullet traveling at a velocity of 2,840 fps. A shorter variant of the Winchester Short Magnum (WSM) family, the new cartridge appears to be about .090″ shorter than the .270 WSM. It has the same 35-degree shoulder angle as the .270 WSM.

LINK: 6.8 Western official SAAMI Cartridge and Chamber Diagram (PDF)

6.8 western rebated precision magnum cartridge western .270 wsm SAAMI

For additional information on these new cartridge designs and other recently accepted cartridge and chamber designs, visit SAAMI.org.

Permalink Bullets, Brass, Ammo, Gear Review, News, Tech Tip 9 Comments »
November 20th, 2020

Access 11 Years of Shooting Sports USA Stories — All FREE!

Shooting Sports USA competitive shooting high power marksmanship archive SSUSA

Enjoy the Shooting Sports USA Archives
With the COVID-19 restrictions we’re all spending more time indoors at home. For some folks that means long sessions in front of the boob tube. Here’s a better idea — there’s a vast resource of great gun-related content available online for FREE. Check out the Shooting Sports USA Articles Archive. SSUSA maintains a vast digital library with hundreds of articles going back to June 2009.

Shooting Sports USA competitive shooting high power marksmanship archive SSUSAIt’s easy to find back issues of Shooting Sports USA magazine. Here’s how: Using the gray toolbar at the top, click on the “ARCHIVES” icon in the upper right area (indicated with red arrow). When you click on “ARCHIVES”, a window will open with a selection of Shooting Sports USA magazine covers/dates in a vertical column.

Next use the vertical scroll bar to go from November 2020 (the latest issue) all the way back to June 2009. Click any issue cover to read.

Shooting Sports USA competitive shooting high power marksmanship archive SSUSA
The June 2020 issue features a Palma rifle built with Eliseo Tubegun Chassis System.

How to Find and Save Articles
To search through back issues, select “MORE OPTIONS” from the toolbar. Then click the “SEARCH” button. When that opens, select either “Search archives” for ALL back issues or “Search Only this Issue”. When you’ve made your choice, enter your search term(s). For example, you can search for “Camp Perry” or “Palma” or “F-Class Championship”. You can also save any archived issue as a PDF for viewing offline. Just click “SAVE” to download the article you’re currently viewing/reading.

Shooting Sports USA competitive shooting high power marksmanship archive SSUSA

Read Sample Articles
Here are a couple of our favorite SSUSA feature stories from recent years. There are hundreds of other informative articles worth reading.

Wind-Reading Tips from Champion Shooters »

Shooting Sports USA Wind Reading tips

How to Clean and Maintain Match Barrels »

Shooting Sports USA Barrel Maintenance Clean Bore Scope

Permalink - Articles, News, Shooting Skills No Comments »
November 20th, 2020

Smarter Reloader — Use Expander Mandrels with Your New Brass

Expander Mandrel reloading case neck tension cartridge brass

Before you load that nice new cartridge brass for the first time, run an expander mandrel down the case necks. This will iron out dents and provide more uniform neck tension. Chose a mandrel diameter that provides appropriate neck tension.

Lapua brass is so good that you’ll be tempted to just load and shoot, if you have a “no-turn” chamber. However, some minimal case prep will ensure more uniform neck tension. Keeping your neck tension very uniform allows more consistent bullet seating. That, in turn, usually yields better accuracy, and lower Extreme Spread and Standard Deviation (ES/SD). Lapua brass, particularly 6mmBR, 6.5×47, 6.5 Creedmoor, and .308 Win comes from the factory with tighter-than-optimal necks. Before you seat bullets, at a minimum, you should inside chamfer the case mouths, after running an expander mandrel down the necks. The expander mandrels from both Sinclair Int’l and K&M will both leave the necks with enough neck tension (more than .001″) so you can then seat bullets without another operation. We suggest putting a bit of lube on the mandrel before running it down the necks — but remove any lube that gets inside the necks before seating bullets.

Sinclair Expander Tool Mandrel

Both Sinclair and K&M Tools make a die body specifically to hold expander mandrels. The Sinclair version, is shown above. This $32.99 unit fits caliber-specific expander mandrels ($9.99) which measure approximately .001″ less than bullet diameter for each caliber. This is an updated “Gen II” design that completely captures the mandrel within the die so the mandrel cannot pull out. It also has an O-ring in the die cap that allows the mandrel to self-center within the case neck. Sinclair now offers three sizes of die bodies for expander mandrels: .17 -.338 Caliber (#749-011-715WS $32.99); .357 – .50 caliber (#749-008-843WS, $32.99), and a special .50 Cal die body for large-diameter 50 BMG presses (#749-009-163WS, $39.99). All Generation II dies are machined from stainless steel and the standard diameter 7/8-14 dies include the Sinclair Stainless Steel Split Lock Ring.

Once you run the Sinclair expander mandrel down the necks of Lapua brass, after you account for brass spring-back, you’ll have about .002″ neck tension*. This will make the process of seating bullets go much more smoothly, and you will also iron out any dents in the case mouths. Once the case mouths are all expanded, and uniformly round, then do your inside neck chamfering/deburring. The same expander mandrels can be used to “neck-up” smaller diameter brass, or prepare brass for neck-turning.

Forum member Mike Crawford adds: “These expanders can also reduce runout from offset seating. Prior to bullet seating, expand the sized necks to force thickness variance outward. With the Sinclair system, the necks will springback fine, and will not be pulled out of center. This leaves plenty of tension, and bullets seated more centered. I do this, even with turned necks, to get improved seating.”

Mandrels vs. Expander Balls on Decapping Rods
If you haven’t acquired an appropriate expander mandrel for your brass, but you DO have a full-length sizing die with an expander ball, this will also function to “iron out” the necks and reduce tension. However, using a die with an expander ball will work the necks more — since you first size them down, then the ball expands them up again. Typically (but not always), run-out is worse when using an expander ball vs. an expander mandrel.


* This .002″ tension is what we have observed with Lapua 6mmBR, 6.5×47, 6.5 Creedmoor, and .308 Win brass. This might vary with much smaller or larger cases, and of course a different brand of brass might yield different results. If you get too little tension with your current mandrel, you can get a smaller-diameter mandrel from 21st Century Shooting. 21st Century even offers low-friction Titanium Nitride-coated mandrels.

Permalink Bullets, Brass, Ammo, Reloading No Comments »
November 19th, 2020

Getting Vertical Fliers? Check Firing Pin and Ignition System

USAMU Handloading vertical dispersion ignition rimfire accuracy firing pin
Top to bottom – Remington firing pin assembly with ISS, Tubb SpeedLock alloy-composite system without ISS (current versions have dual, opposite-wound springs), and Remington short action firing pin assembly without ISS.

The U.S. Army Marksmanship Unit regularly publishes technical articles on the USAMU Facebook page. One informative USAMU article covered mechanical issues and related ignition irregularities that can cause vertical fliers even with good ammunition in an otherwise excellent rifle. We highly recommend you read this article, which offers some important tech tips.

USAMU handloading hump day

Vertical Dispersion: Mechanical/Ignition Issues?

Poor or inconsistent ignition has long been known to be one of the “usual suspects” when one encounters vertical fliers that just shouldn’t be there. By having a sense of some of the basic principles involved, and a few basic areas to check, the shooter may avoid colsiderable frustration, not to mention time, expensive loading components and barrel wear.

USAMU Handloading vertical dispersion ignition rimfire accuracy firing pinIs your well-built rifle of high-quality components plagued with vertical fliers across more than 1-3 handload combinations? Consider the bedding, crown and scope/sight mounts. Are they correct? If so, then you might check for ignition issues before boldly undertaking an extensive, expensive, and quite possibly fruitless quest for the “magic handload”.

SEEING IS BELIEVING: While the author had been aware for many years that poor ignition should be considered and ruled out when dealing with vertical fliers in an otherwise-excellent rifle, actually seeing the problem and its almost instantaneous cure really drove the lesson home.

He was working with a “dot” rifle – a .22 LR match rifle that really stacked bullets into little piles at 50 yards and beyond. With one lot of ELEY Tenex, it produced consistent “bughole” groups at 50, but with another, selected lot of Tenex, similar groups were regularly ruined by single, vertical fliers that did not appear in other rifles. Rather than spending days burning up expensive, select ammunition looking for “magic lots”, he contacted a well-respected rimfire gunsmith and explained the situation.

Without so much as batting an eye, the highly-experienced ‘smith tore into the rifle’s action, and quickly found the cause(s) of the problem. He discovered a demonstrably weak firing pin spring, plus a chip out of the face of the firing pin where it contacted the cartridge rim.

After replacing and tuning the offending parts, the rifle immediately began shooting tiny, bughole groups with the previously “unacceptable” lot of Tenex. Centerfire rifles can also benefit from ensuring positive, consistent ignition. A wise riflesmith is literally worth his weight in gold!

So, what are some issues we as shooters can inspect in our rifles to help determine if ignition woes could be part of our problem? At the club level, ask yourself if that “experienced” Remington, Winchester 70, or even Springfield-based match bolt gun you’re using is still running its’ original 40-80 year-old factory striker spring? If so, a new replacement is cheap insurance against current or future problems. (And BTW, it might be best to stick to the normal, factory-spec spring weight. A super-powerful spring can cause vertical, just as a weak one one can.) Along with that, a routine check for proper firing-pin protrusion is a quick preventive measure that can rule out potential issues.

Other areas to consider are the centering and consistency of the firing pin’s operation in the bolt. Admittedly, with the increasing use of precision-machined custom actions, this is becoming less an issue every day. Below is the firing pin assembly from a custom BAT action:

USAMU Handloading vertical dispersion ignition rimfire accuracy firing pin

However, particularly with factory actions, a very quick and easy check is to remove the bolt, let the firing pin go forward, and look at the firing pin tip through the firing pin hole. Is the tip off-center in the hole, and possibly striking it as it moves forward? Is the hole out-of-round or burred from being struck repeatedly? If so, a trip to the riflesmith is likely in order.

Similarly, machining issues in the bolt/firing pin system can lead to rough and erratic firing pin movement, in which the firing pin drags against an internal surface of the bolt. In high-quality rifles these issues are relatively rare, but not unheard-of, and it takes mere minutes to rule them out. It may be worthwhile to remove the cocking piece/firing pin/spring assembly and look for any unusual gouges, dings, peening, burrs or signs of abnormal wear.

This task is especially easy with Winchester 70s, Springfields, and the similar Mauser 98s, involving little more than the push of a button and unscrewing the cocking piece assembly. This is just one of the many reasons these tried-and-true actions have earned such a loyal following in the field, among hunters who must maintain their rifles away from a shop.

USAMU Handloading vertical dispersion ignition rimfire accuracy firing pin

Particularly with older rifles, watch for and remove excess grease (or even Cosmoline!) from both the firing pin assembly and inside the bolt. This can help improve firing pin speed and consistency. Other bolt-action designs may need a take-down tool or other measures.

As part of this inspection, AFTER ENSURING THE RIFLE IS UNLOADED, slowly cock the rifle, dry-fire, and repeat several times. Listen carefully near the action for inconsistency in the sounds it generates. Does the striker falling make the same sound each time? Do you hear or feel grinding upon operation? If so, where?

Be sure to check the operation of the cocking piece (bolt shroud), firing pin within the bolt shroud, the cocking piece cam and the rear of the bolt body where the cocking piece cam operates. As with our examination for abnormal wear marks discussed above, look for marks indicating roughness or a possible need for light polishing. Then, clean and lightly grease the bearing surfaces while you’re at it.

Remington 700 bolt shroud and cocking cam
Rem 700 bolt cocking cam

These are relatively easy checks that shooters can undertake to perform a preliminary inspection on their own. Other mechanical issues can also cause ignition issues, chiefly centered around the action of the trigger, sear and sear spring. If these are suspected, a trip to an experienced, qualified riflesmith for diagnosis is recommended. We hope you find this information helpful! Join us again next week, and in the meantime, enjoy the shooting sports safely!

Permalink - Articles, Gunsmithing, Tech Tip No Comments »
November 19th, 2020

Hidden in Plain Sight — Storage Options for Long Guns and Pistols

hidden gun safe Tactical Walls concealment

When you want a firearm for home defense instantly available, you don’t necessarily want it buried in a large gun safe in a remote section of your house. There are reasons you may want a rifle, pistol, or shotgun ready to be deployed quickly. One solution for this is the “hidden in plain sight” option. Using common household furniture or house features (such as vents and mirrors), you can stash a firearms where it can be quickly accessed, but no unwelcome visitor will suspect it is stored. This article presents some popular gun storage options.

Virginia-based Tactical Walls is a leader is specialized gun storage/concealment systems. This company offers a variety of USA-made furniture/decorative options for gun storage. There are mirror assemblies, sliding wooden flags, tables with hidden storage, bookcases, shelving units, and more. The General Manager of Tactical Walls is Dennis DeMille, formerly GM of Creedmoor Sports, and a talented marksman.

Creedmoor sports Tactical Walls Dennis Demille GM General Manager concealment

Dennis tells us: “Tactical Walls was the pioneer in concealing firearms in plain sight”. He says this company has great creativity and impressive production capabilities. View all Tactical Walls concealment gun storage options at TacticalWalls.com.

Fine Firearms Furniture with Slide-Open Table Top
Here’s something that will teach unwanted guests some “table manners”. We’ve seen handguns hidden in books, and stowed behind faux baseboard vents, but this hand-crafted, slide-open table takes the cake. We doubt that anyone could sit down at this table and suspect that a shotgun, scoped rifle, two pistols and a knife were stored securely inside. There’s an arsenal hiding in there!

furniture table top sliding concealment gun safe vault secure

To access the guns under the sliding table-top, first you flip down a wood trap-door on the side. That exposes a key-lock which unlatches the interleaved left and right table segments. These slide open horizontally on metal tracks, exposing the full arsenal underneath. This “table vault” is a very clever design, built with fine craftsmanship. You can purchase this table from the maker for $1799.00.

Hidden in Plain Sight — Guide Gear Vent Pistol Locker

hidden gun safe Tactical Walls concealment

This clever “imposter vent” should fool any unwanted visitors. This Guide Gear Hide-A-Gun vent storage unit is just $34.99 on Amazon. NOTE: This will require installation in the wall, with attachment to studs.

Decorative Storage — Patriot Flag Concealment Unit

hidden gun safe Tactical Walls concealment

This handsome triangular wood box has hidden storage for a firearm and/or valuables. It is $39.95 at MidwayUSA or $49.99 on Amazon. You may want to bolt this down to a shelf for extra security.

Permalink Gear Review, New Product, News No Comments »
November 18th, 2020

Precision Rifle Challenge on Shooting USA This Week

Shooting USA hornady precision rifle challenge Utah 2020 AccurateShooter

Precision Rifle Challenge on Shooting USA This Week
This week, Shooting USA TV features a show that should interest PRS/NRL fans, tactical marksmen, and long range hunters. Run in Utah’s backcountry, the Hornady Precision Rifle Challenge is a unique long range competition with serious wind and elevation changes. This isn’t a typical PRS Pro Series match by any means. Participants in this challenging Precision Rifle match encounter tough conditions not typically seen in other tactical matches. The match runs in summer in Utah, just across the state line from Evanston, Wyoming. Watch the show 11/18/20 on the Outdoor Channel.

Shooting USA hornady precision rifle challenge Utah 2020 AccurateShooter

This video is great — lots of equipment closeups, stage set-ups, plus drone footage of range.

Shooting USA hornady precision rifle challenge Utah 2020 AccurateShooter

At this year’s match, held July 10-11, 2020, Clay Blackketter took first place overall, Doug Koenig won the Production Division, and Travis Gibson won the Tactical Division using a .308 Win. All three men are members of Team Hornady. This was a big match with 177 competitors at Hornady’s private 250,000 acre ranch property outside of Evanston, Wyoming.

Shooting USA hornady precision rifle challenge Utah 2020 AccurateShooter

Shooting USA will air Wednesday, November 18, 2020, at 9:00 PM Eastern (8:00 PM Central) on the Outdoor Channel. If you miss that, it runs again on Thursday afternoon. Look for Shooting USA on the Outdoor Channel. In addition, you can watch all episodes of Shooting USA on the VIMEO channel by subscription. Each episode is just $0.99, about 1/10th what a movie ticket costs these days.

Browning M2 Heavy Machine Gun — History’s Guns
In addition to the Precision Rifle challenge, this week’s Shooting USA episode also showcases the Browning M2 .50 Caliber Heavy Machine Gun. The .50 Cal M2 machine gun was designed by John Moses Browning and went into military service in 1933. Its design is similar to Browning’s earlier M1919 Browning machine gun, which was chambered for the .30-06 cartridge. The M2 uses the much larger and more powerful .50 BMG cartridge, which derives its name from the gun (BMG stands for “Browning Machine Gun”). It has been referred to as “Ma Deuce”, in reference to its M2 nomenclature.

Shooting USA SHOT Show 2019 AccurateShooter

With a half-inch diameter bullet weighing 750 grains, the .50 BMG cartridge is effective beyond a mile in attacking light armored vehicles. And the M2 Browning has served for nearly a century, in the skies, on the ground, and at sea. Updated versions of the Ma Deuce are still being produced and deployed today.

Permalink - Videos, Competition, Tactical No Comments »
November 18th, 2020

How to Sell Guns Online — Web Classifieds and Auction Sites

Gunbroker shooters forum gun classified ads

online sales auctionsThese days, online gun Auctions and Classifieds attract more attention than ever. With so many folks accessing the internet daily, many gun owners find it easier to sell their firearms online rather than in the local gun store. Online selling opens up a much larger audience. With over 53,000 members in the AccurateShooter Forum, we have a very active gun Classifieds area. And then of course, there are the big dogs — Gunbroker and GunsAmerica. You’ll find tens of thousands of guns for sale on those big sites.

Before selling your stuff online, you should survey the major online sales and auction sites, comparing their fees and features. The costs are NOT all the same. For example, though you can list an item on Gunbroker for free, if the gun sells you may end up paying a LOT of money. Confirm this with the Gunbroker FEE Calculator. Using Gunbroker’s Fee Calculator we determined that, for a $2500.00 gun, the seller will pay $93.75 in fees! Yes, that’s for a single sale.

That’s why many sellers prefer to list their rifles on Benchrest.com, or on the AccurateShooter.com FORUM Classifieds. Currently, basic Accurate Forum members get three (3) free adverts in a 12-month period, while Gold and Silver members get unlimited classifieds for 12 months. A $25 Silver membership is less than you’d pay to sell one single $550 item on Gunbroker ($25.50 fee).

SEVEN TIPS for Selling Your Gear Online

1. Include Good, Sharp Photos: A custom rifle or expensive optic will sell two to three times as quickly, at a higher price, if you include good sharp photos. We can’t over-emphasize the importance of good photos. For all products, show multiple angles, and include the original boxes if you still have them. For a rifle, include detail shots as well as a photo of the complete gun.

2. Resize Your Photos Before Posting: Half of users will probably be viewing your ads with a smartphone. So you don’t need huge photos. We recommend you size your photos down to 1000 pixels wide. This will make uploads more efficient and ensure the Forum server can handle the file sizes.

3. Be Fair and Complete in Your Description: Buyers appreciate honesty and thoroughness in product descriptions. Potential buyers want details. For a rifle, list the gunsmith, barrel-maker, round count, and provide the specifications. If the rifle has a winning competition history, say so. Always highlight the positives in your description, but you should disclose significant flaws. A buyer will be more willing to purchase if he thinks the seller is 100% honest.

4. Don’t Forget Contact Info: We’re amazed by how many adverts omit key contact info. In a forum classified ad, include a first name, e.g. “Ask for Dan.” We also suggest you list your residence city and state. Some buyers will prefer to buy from a seller in their home state. When communicating with a buyer, provide your phone number and email address. We recommend that all buyers and sellers actually talk live on the phone before concluding high-value deals.

5. Make the Price Attractive: Buyers, everywhere, are looking for good deals. If you want your item to move quickly, set the price accordingly and don’t expect top dollar. Check comparable listings and then discount by 10-15% if you want the item to move fast.

6. Include a Call to Action: Advertisements can be twice as effective if they include a “Call to Action”, i.e. a statement that directly inspires the potential buyer to respond. Sample calls to action are: “Free Shipping — today only.” Or, you can use a time limit: “Special Sale Price good ’til the end of the month”.

7. Always Follow ALL Applicable Laws: Even in states where private face-to-face gun sales are allowed, we recommend ALWAYS using an FFL for firearms transfers. This will protect YOU the seller. In addition, do your homework. Don’t sell to a buyer in a city or state (such as California) state or city where the particular firearm (such as an AR15) may be restricted

Classified Advert vs. Auctions
For benchrest, F-Class, Silhouette, Tactical or High Power rifles, you may get the best results posting a For Sale ad on a Forum that caters to the right discipline. You want your ad to reach the right audience. On the other hand, a GunBroker.com auction will have tens of thousands of potential buyers. Realistically, however, if you price your rig attractively, it should sell quickly in a Forum Classified Advert. Plus with conventional Classifieds, you can sell immediately — you don’t have to wait for the auction to end. For scopes and reloading equipment (but not firearms, actions, barrels etc.), also consider eBay, which still allows many gun-related items.

Permalink - Articles, Hot Deals 1 Comment »
November 18th, 2020

Understanding Milliradians (Mils) and Mil-Dot Scopes

mildot ranging milliradian Milrad

We first ran this article in 2012, and it was very well received. Since then, many Forum members have requested an explanation of MILS and mildots, so we decided to run this feature again…

Mildot scope reticleIn this NSSF Video, Ryan Cleckner, a former Sniper Instructor for the 1st Ranger Battalion, defines the term “MilliRadian” (Milrad) and explains how you can use a mildot-type scope to range the distance to your target. It’s pretty simple, once you understand the angular subtension for the reticle stadia dots/lines. Cleckner also explains how you can use the milrad-based reticle markings in your scope for elevation hold-overs and windage hold-offs.

Even if you normally shoot at known distances, the hold-off capability of milrad-reticle scopes can help you shoot more accurately in rapidly-changing wind conditions. And, when you must engage multiple targets quickly, you can use the reticle’s mil markings to move quickly from one target distance to another without having to spin your elevation turrets up and down.

WEB RESOURCES: If you want to learn more about using Milliradians and Mildot scopes, we suggest the excellent Mil-dot.com User Guide. This covers the basics you need to know, with clear illustrations. Also informative is The Truth about Mil Dots by Michael Haugen. Mr. Haugen begins with basic definitions: 1 radian = 2 PI; 1 Milliradian (Milrad or ‘Mil’) = 1/1000th of a radian; 1 Milliradian = .0573 degrees.

Permalink - Videos, Optics 4 Comments »
November 17th, 2020

CZ 457 Long Range Precision (LRP) Rimfire Rifle

CZ 456 long range precision LRP tactical PRS NRL22 rimfire .22 LR 22LR rifle

Earlier this year, CZ introduced a new .22 LR rifle for shooters looking for a PRS/NRL rimfire cross-trainer or a bolt gun for NRL22 competition. This new CZ 457 Long Range Precision (LRP) model features a 20″ fluted barrel with factory-installed muzzle brake. The stock adjusts for length-of-pull and has an adjustable cheekpiece. On top of the action is a +25 MOA Weaver-type rail so you have enough elevation to shoot out to 300 yards and beyond with most scopes. The single-stage trigger is also adjustable. MSRP is over $1200.00 but this rifle is now available for $899.99 at KYGunCo.com.

CZ factory video shows features of CZ 457 LRP:

CZ 456 long range precision LRP tactical PRS NRL22 rimfire .22 LR 22LR rifle

The LRP’s target stock boast textured grip surfaces and a near-vertical pistol grip. The rear has a “hook” for positions where the shooter will use his non-shooting “off” hand to steady the rear of the rifle when the front is on a bag or support. The rear rail allows quick installation of monopod or bag-rider. There is a very fat, oversized bolt knob. A five-round magazine is standard with 10-rounders availalble.

The height of both the comb (cheekpiece) and buttpad are adjustable. Also the length-of-pull can be adjusted with the four included spacers (351-382 mm).

CZ 457 LRP Specifications:
Caliber: .22 LR
Barrel: 20.66″, hammer-forged, fluted
Barrel Twist Rate: 1:16″
OAL Length: 39.76″
OAL Weight: 8.3 pounds
Rail: +25 MOA Elevation
Trigger: Adjustable
Cheekpiece: Adjustable for Height
Buttpad: Adjustable for Height
LOP: Adjustable with Spacers
Stock: Beech with Soft-touch Finish
Muzzle Brake: Standard

Click Image to see full-screen photo of CZ 457 LRP
CZ 456 long range precision LRP tactical PRS NRL22 rimfire .22 LR 22LR rifle

Permalink - Videos, New Product, News, Tactical No Comments »
November 17th, 2020

Precision Load Development Target — And Printing Tips

FREE Accuracy Precision Rifle Shooting Target
Right-Click target image to download printable PDF.

We created the above target a decade ago. Since then it has been used by tens of thousands of shooters. It has proven very popular as a load development target, since all your load data fits neatly in the boxes under each target. In fact this target is being employed by both rifle-makers and barrel-makers (including Criterion) to test their products. The target was designed for aiming efficiency. The diamonds have 1/2″ sides and you can align your reticle cross-hairs on the horizontal and vertical lines. It is a clean design that is easy to see even at 200 yards with a 20X scope. When we test, we usually crank in a little elevation, setting the point-of-impact higher, so that our shots fall in the gray circles. That way you leave the red diamonds intact for precise aiming. CLICK HERE to download Load Dev target.

We also use these two targets for load development and precision practice.
The circle dot target can also be used for informal rimfire competition at 50 yards.
Right-Click Each Target to Download Printable PDFs.

FREE Accuracy Precision Rifle Shooting Target FREE Accuracy Precision Rifle Shooting Target


GET 50 More FREE Targets on AccurateShooter Target Page »

Printing Targets card stock heavy paper benchrestHow to Print Your Targets
Most of us have access to a printer at home or at work. That means you can print your own targets. You’ll find hundreds of free target designs online, including dozens of downloadable targets on our AccurateShooter.com Target Page. If you’re feeling creative, you can design your own target with a computer drawing program such as MS Paint.

Paper Stock Is Important
If you want your self-printed targets to show shots cleanly (and not rip when it gets windy), you should use quality paper stock. We recommend card stock — the kind of thick paper used for business cards. Card stock is available in both 65-lb and 110-lb weights in a variety of colors. We generally print black on white. But you might experiment with bright orange or yellow sheets. Forum Member ShootDots report: “They sell cardstock at Fed-Ex Kinko! I use either Orange or Yellow. That makes it easy to see the bullet holes clearly.” NOTE: Test before you use the 110-lb Cardstock. On some printers, with the heavier 110-lb card stock, you will need to have the paper exit through the rear for a straighter run.

Printing Targets card stock heavy paper benchrest

Here are some Target-Printing Tips from our Forum members:

“Staples sells a 67-lb heavy stock that I have settled on. I use the light grey or light blue, either of these are easy on the eyes on bright days. I have used the 110-lb card stock as well and it works fine. It’s just a little easier to print the lighter stuff.” (JBarnwell)

“Cardstock, as mentioned, works great for showing bullet holes as it doesn’t tear or rip like the thin, lightweight 20-lb paper. I’ve never had a problem with cardstock feeding in the printer, just don’t stick too many sheets in there. If I need three targets, I load only three card stock sheets”. (MEMilanuk)

“20-lb bond works pretty well for me if I use a spray adhesive and stick the entire back of the paper’s surface to the backer board.” (Lapua40X)

Permalink Gear Review, Shooting Skills No Comments »
November 16th, 2020

Bargain Finder 269: AccurateShooter’s Deals of the Week

AccurateShooter Deals of the Week Weekly Bargain Finder Sale Discount Savings

At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

1. Sportsman’s Warehouse — Winchester .22 LR Wildcat, $219.99

sportsmans warehouse winchester wildcat rimfire .22 LR 22LR rifle sale
Removable lower receiver, Picatinny rails, good trigger, great price

Here is a fun little semi-auto .22 LR rifle at a crazy low price — $219.99 at Sportsman’s Warehouse. The Winchester Wildcat takes Ruger 10/22 mags, and has some great features, such as field-removable lower receiver, ambidextrous controls, integral Picatinny rails and rear barrel access. Here’s a good video that shows this rifle in action. We think you’ll be impressed. It has a good trigger and shoots well. In many respect the Wildcat beats the Ruger 10/22 while costing considerably less.

The Wildcat comes with a Picatinny top rail for optics or electronic sights. A Picatinny rail on the forearm lets you attach an optional bipod, sling mount or other accessory. The lower receiver assembly is easily removed from the upper assembly by pushing a single button located at the rear of the upper assembly with your finger. No tools are required. The Wildcat accepts a wide range of aftermarket magazines that are compatible with the 10/22.

2. Natchez — Leupold Black Friday Optics Sale, Save up to 30%

Natchez black friday sale discount 30% blemished Leupold scopes, rangefinders, spotting scopes, and binoculars
Save Big on Regular and Blemished Leupold Scopes and Optics

The annual Black Friday Sale started early at Natchez Shooter’s Supplies with HUGE savings on regular and blemished Leupold scopes, rangefinders, spotting scopes, and binoculars. You can save 30% or more on blemished items, which still have full factory warranties. For example a “blem” Leupold SX-2 25-60x80mm HD spotter is now $769.99 marked down from $1099.99 — a 30% savings!

3. Sportsman’s Warehouse — AR-15 Rifles from $599.99

sportsmans warehouse MSR AR15 AR-15 semi-auto rifle sale
Get your Black Rifle now while you still can

Now that it looks like we will have a new President who has declared his clear intention of banning mag-fed, semi-auto rifles, maybe it’s time to get that AR-15 while you still can. While ARs are flying off the shelves right now, thankfully Sportsman’s Warehouse still has a large inventory of complete .223 Rem/5.56×45 AR-platform rifles in a variety of configurations. Prices start at $599.99.

4. Midsouth Shooters — RCBS Explorer 2 Reloading Kit, $359.99

RCBS reloading kit press sale November
Good starter kit, with nice press, powder measure and primer tool

With the shortage of factory ammo in many calibers, more folks than ever are turning to hand-loading. Here is a good RCBS Explorer 2 Kit that will get you started. Along with the Reloader Special 5 Press, you get an excellent Uniflow-III Powder Measure, a digital pocket scale, hand priming tool, Powder Funnel, fold-up hex key set, deburring tool, case loading block and spray case lube. And the kit even includes a Speer #15 Reloading manual, with loading procedures and load data.

5. Brownells — KRG Bravo Chassis Rem 700, $329.99 with Code

brownells krg bravo tactical hunting stock internal aluminum precision
Versatile internal frame stock for PRS or hunting — tan, black, or green

The Kinetic Research Group (KRG) Rem 700 Bravo Chassis is a good dual-purpose choice for PRS and hunting. There is an internal aluminum frame with polymer exterior in Flat Dark Earth, Sako Green, or Black. The stock fits Rem 700 and Rem clone actions, accepts AICS-pattern mags, and is M-LOK compatible. The 2.9-lb KRG Bravo chassis features adjustable cheek riser and length-of-pull, built-in thumb shelf, plus quick-detach sling-swivel and bipod mounts. The KRG Bravo stock costs $349.99 at Brownells. You can also get $20 Off with Brownells code VTJ, lowering the net cost to $329.99.

6. Amazon — Teslong Borescope $39.99 or Rigid Version $79.99

teslong digital borescope
Teslong borescopes are game-changers — true “must-have” tool

The Teslong digital borescope has been a huge success. This compact, electro-optical, cable-type borescope outputs sharp, high-resolution images and VIDEO to desktop computers and laptops, and many tablets. Check out our Full Teslong Review complete with inside-the-barrel videos. Get the basic version for $39.99 on Amazon or the rigid version Teslong Borescope for $79.99. If you scope your barrels often, you may prefer the rigid version which is easy to insert and rotate.

7. Sportsman’s Warehouse — RCBS Products on Sale

RCBS black friday reloading tools presses sale
Great Prices on RCBS tools and products — but act soon

Take advantage of Black Friday early at Sportsman’s Warehouse. A wide selection of RCBS products is on sale now, with significant discounts. Save on presses, powder dispensers, case prep centers, dies, priming tools and more. But act fast — items are selling out quickly. For example the RCBS Rock Chucker press, discounted from $179.99 to $143.99 ($36 off) sold out early this morning.

8. Amazon — Frankford Arsenal Perfect Seat Priming Tool, $69.79

frankford arsenal perfect primer
Precise Depth Control, 12 Shell Holders, Quick-Change, Carry Case

Seating primers to a consistent depth helps deliver enhanced accuracy and low ES/SD. However, most priming systems don’t allow precise depth control. If you’re looking for a priming tool that allows you to adjust primer seating depth, check out the Frankford Arsenal Perfect Seat Hand Primer. This tool comes in a protective case along with a full set of case holders and primer flip tray. A quick thumb release system allows you to switch from small to large primers quickly.

9. Precision Reloading — Bullet Sample Kits, $4.17 and Up

Barnes Nosler hunting bullet proof sample 12-pack
Good way to test bullets or get a few for your hunt

With these Barnes and Nosler Bullet sample kits, you can try a dozen bullets before you make a big investment. And for hunters, a 12-pack of bullets may be all you need for an annual deer hunt. Use our method to zero your hunting rig in 4 rounds, and you have 8 bullets left for game. Precision Reloading offers a variety of Barnes and Nosler Bullet 12-packs, starting at just $4.17. Calibers on sale include .204, .270, .284 (7mm), and .338.

10. Amazon — Howard Leight MAX Earplugs, $8.40/50 Pairs

accurateshooter.com review Max-1 Howard Leight ear plugs

20 Pairs
50 Pairs

Best NRR (33 dB), Very Comfortable, Great Value

These Howard Leight NRR 33 Max Plugs are your Editor’s favorite foam earplugs. Between shooting, motorcycling, and mowing lawns, I probably have Max plugs in my ears 2-3 days a week. This is a very good price for a bulk pack of 50 pairs. NRR 33 is the best Noise Reduction Rating you’ll find for plugs alone. And if you act soon, you can get free shipping to boot.

Permalink Bullets, Brass, Ammo, Handguns, Hot Deals, Optics, Tactical No Comments »
November 16th, 2020

Hunters for the Hungry Program Helps the Needy

NRA hunters for hungry food donations venison deer meat

We support Hunters for the Hungry, a program that feeds needy families in the USA. Hunters for the Hungry (HFH) is a nationwide program that gives back to communities by supplying meals throughout the country. The NRA works closely with state agencies that supervise meat donations. Since the program’s inception, Hunters for the Hungry has brought millions of pounds of game meat to homeless shelters, soup kitchens, and food banks across the United States. This program has been in place for 27 years. In recent years, HFH affiliates donated 2.1 million pounds of meat on average, supplying over 10 million meals.

NRA hunters for hungry food donations venison deer meat

Questions? READ Hunters for the Hungry FAQ »

Hunt and Help Others
Many American hunters are able to harvest more than they can eat or share with friends and family. Through Hunters for the Hungry you can help share your bounty with those in need. All donated game must be field dressed and legally harvested. Note that each state has different rules and regulations for donations, please check with your local drop off location prior to donating.

NRA hunters for hungry food donations venison deer meat

Big Horn Armory Gives 5% of Sales Proceeds to Wyoming Hunters for the Hungry Program
To help support H4H efforts, Big Horn Armory has partnered with the Wyoming Wildlife Federation (WWF) for a special Pay it Forward H4H program. Throughout November 2020, five percent (5%) of all net proceeds from sales made from the Big Horn Armory website will be donated to the WWF’s H4H program. This donation will help offset the costs of processing donated game meat, which will be distributed to local food banks, pantries, and other food services within Wyoming.

NRA hunters for hungry food donations venison deer meat

“We are excited to partner with Big Horn Armory, a Wyoming company… to help bring healthy wild game to those in need. We cannot thank them enough for their support of this crucial program” commented Dwayne Meadows, executive director of WWF.

NRA hunters for hungry food donations venison deer meat

Permalink Hunting/Varminting, News No Comments »