This video from Brownells talks about a the crown of a barrel and how the crown’s condition affects accuracy. As the bullet leaves the barrel of the gun, the shape, alignment and the condition of the crown can affect the accuracy of your shot. A proper crown is essential to ensure that the bullet leaves the barrel correctly and that the propellant gasses behind the bullet are distributed evenly on firing. A square crown without burrs and a smooth transition will normally ensure consistency from shot to shot. By contrast, a damaged crown can cause unpredictable flyers that open your group. That’s why it’s important to have perfect crowns on all your barrels.
The video explains the different types of crowns that can be used. In addition, the video shows how you can chamfer your muzzle in a home shop. If you use a properly-sized pilot, cutting a shallow chamfer is something that most guys with some mechanical skill can handle. Just be sure to use lubricant, flush chips, and don’t rush the job. Cutting the barrel is another matter. At the 1:20 mark the video shows how to use a hack-saw to remove a damaged muzzle section. While this may be fine for an inexpensive rifle that needs a “quick fix”, we do NOT recommend using a hack-saw with a vise for a competition barrel. The reason is that it is too easy for a novice to produce a cut that is not square. We suggest letting a professional gunsmith cut and crown your competition barrels.
Share the post "Brownells Video Shows How to Cut Chamfer on Barrel Crown"
As posted in the Calguns.net a few years back, there was a nasty out-of-battery firing incident involving a BOHICA Arms .510 DTC AR15 upper. The cause of the out-of-battery firing is not certain but it appears that the ammo was not sized properly and the firing pin may have been stuck in the extended position. As a result, the round went off before the bolt was closed with the lugs seated. In the process, the bolt handle broke off, as the bolt retracted violently, actually ending up outside the bolt raceway.
The shooter was badly injured, with broken bones and ligament damage to his left hand and tissue damage to his right hand. The shooter was holding the rifle with his left hand near the front of the chamber where a gas vent was located. Gas and shrapnel existed the vent hole causing the severe injuries to the left hand.
From range reports, it appears that the shooter had been struggling to chamber previous rounds, and was having trouble closing the bolt. After talking with one of the rangemasters, a poster on AR15.com reported: “The guy was using new reloads that weren’t exactly fitting well into his chamber. [The shooter] was slamming the bolt handle with his palm trying to get the cases to lock in. The guy was also slamming the bolt forward full force from the rearmost position back and forth trying to ram the cases into chamber in an attempt to squeeze the rounds in so the bolt could close. Finally, on one of the attempts … the possibly stuck firing pin rams into the primer and explodes the round when he slams the bolt forward (zero lug engagement hence the KB) and shooter puts himself into a world of hurt.”
Lessons Learned — Don’t Try to Force Oversize Ammo into a Chamber
By all reports, the shooter’s ammo wasn’t fitting his chamber properly. In an effort to force the ammo into the chamber, he worked the bolt with excessive force. That MAY have caused the firing pin to extend or the hammer to fall without the trigger being pulled. One theory is that the trigger system may have been modified, allowing the hammer to fall from the force of slamming the bolt forward. Others have speculated that the firing pin may have failed to retract because the bolt handle was over-torqued — a safety issue listed in the BOHICA manual.
Whatever caused the out-of-battery firing, it appears that improperly-sized ammo (or a poorly-cut chamber) was the root cause of the problems. If you go to a range and find your bolt does not close easily over the ammo — STOP SHOOTING — don’t try to force the issue. Disaster may result. To paraphrase Johnnie Cochran: “If the ammo doesn’t fit, it’s time to quit”.
Photos by Wildcard, originally posted on Calguns.net.
Share the post "Out-of-Battery Blast Breaks Rifle and Bones in Shooter’s Hand"
ARs and Narrow-Forearm Sporters Benefit from Front Bag-Rider Blocks
Whidden Gunworks offers a smart product that will enhance the bench-rested accuracy of any rifle with an accessory rail on the forearm. The Whidden Track Plate fits securely in the forearm accessory rail on prone, cross-the-course, tactical, and Palma rifles. These guns typically have a narrow and/or rounded fore-end so they rock and wobble when used with a front pedestal rest. The TrackPlate cures that. Once installed it provides a rock-solid, 2.9″-wide platform that mates perfectly with a benchrest-type front sandbag. This gives sling-shooters maximum stability when testing loads or zeroing their sights or scope. Plus you can now shoot F-Class competitively with a prone gun. (The 2.9″ width is 100% legal for F-Open).
The Track Plate is light-weight, has catamaran-style runners to aid tracking and prevent rocking, and can be easily stowed in a range bag. The Track Plate fits BOTH Anschutz and American style forends and is made in the USA of machined aluminum. The Track Plate is available from Whidden Gunworks for $45.00.
Plate designer (and 5-Time Nat’l LR Rifle Champion) John Whidden says: “The Plate is great for any rifle with a rail whether it ís smallbore, centerfire, or an air gun. Now you can try F-Class with your favorite prone rifle: the Plate has a perfect low-drag finish for riding a rest or sandbags and is competition legal.”
Bag-Riders for AR-Platform Rifles from EGW
AR owners should check out the 3″-wide Delrin bag-rider from Evolution Gun Works (EGW). There are two versions, one for front Picatinny Rails, and another that mounts via sling swivel studs. These EGW Bag-Riders were developed expressly to fit the fore-ends of ARs. The front bag-riders are contoured to match the handguard profile so they fits securely with no wobble.
The $49.99 EGW Picatinny Rail front Bag-Rider simply slides on your under-forearm rail and there is a a tension bolt. Attachment is quick and easy. Or, if your AR has no rail get the original $39.99 EGW front Bag-Rider that attaches to a front sling swivel stud anchor. That allows it to mount as easily as a Harris bipod — no rail needed! Just unscrew the swivel stud, put the front bag-rider in place and attach one hex-head machine screw.
Also with the two front Bag-Riders, EGW offers a Rear Bag-Rider for ARs that attaches via the sling swivel anchor. Overall, it is a slick system. Front and rear bag-riders can be attached in a couple of minutes. The Delrin blocks slide easily in the bags and make the gun ultra-stable. The gun tracks straight back.
Share the post "Front Sleds Stabilize Narrow Forearm Rifles and ARs"
Jim Borden of Borden Accuracy/Borden Rifles is adding “something extra” to the Borden actions crafted for F-Class Team USA members. These actions feature a Team Name and Team shield thanks to modern computer-controlled laser engraving. Jim Borden posted: “Here is Tony at Endless Laser Art doing his thing. [Team members] James Crofts, Drew Rutherford, Dan Bramley, Keith Trapp here we come!”
Jim is crafting special actions for both the F-TR and F-Open Team USA squads with laser-engraved USA F-Class Team shields. There is a BRMXD-type called USA Open and a BRM-type action called USA FTR. The F-Open serial numbers start USAFOPEN01 while F-TR numbers start USAFTR01. These are offered to members of USA F-Class Teams.
Watch Laser Engraving of Borden Actions
Watch the video above to see U.S. Rifle Team shield laser-engraved on Borden actions for F-Class Team USA and F-TR Team USA.
Don’t Tread on Me — Laser-Engraved Ax Blade for NRL Founder
Here’s a another example of modern, computer-controlled laser engraving. Travis Ishida, one of the founders of the NRL Precision Tactical series, has obtained a laser engraving machine. This can be great for putting identifying marks on tools, metal gunstocks, motorcycle parts — basically anything where you want some words and/or graphics. We like the message Travis printed on his Ax: “Liberty or Death… Don’t Tread on Me”. Travis posted: “Finally got my laser engraver working and now I want to engrave everything in sight! This could be a lot of fun… and a little obsessive.”
Share the post "Laser Engraving for F-Class Team USA on New Borden Actions"
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Midway USA — Factory Seconds Bullets Sale
⏺ Great prices on huge variety of major brand bullets
Here’s your chance to score major-brand bullets at very significant discounts. MidwayUSA is running a big Factory Seconds Bullets Sale. Right now a wide selection of bullets are offered with major discounts. For the most part, these “seconds” bullets just have slight cosmetic flaws, so they still meet the needs of 99% of shooters. MidwayUSA doesn’t list brand names, but you’ll probably recognize the bullets by shape, weight, and tip type. Grab what you need now — the most popular calibers will sell out.
2. Amazon — Garmin inReach Mini GPS/SAT Comm, $349.99
⏺ Very important safety system for hunters and hikers
Being in the wilderness on a hunt or backpacking trip is great. But it can also be daunting in cases of emergency. Cell phones are great when there’s service but that rarely extends into the backcountry. Stay safe with the Garmin inReach Mini GPS Satellite Communicator. This small, lightweight unit can send a life-saving SOS in an emergency. Plus, with the inReach service you can send/receive text messages via satellite. Measuring just 4″ x 2” wide and weighing a mere 3.5 ounces, the Garmin inReach Mini connects for messaging via the global Iridium satellite network (satellite subscription required). You don’t have to worry about being within range of a cell tower. NOTE: This Mini GPS device can link to your cellphone to display maps and routes.
Would you like the functionality of caliber-specific powder funnels, but don’t want to spend big money on multiple units? Here’s one smart solution — get the Lyman Pro Powder Funnel for under $25. The caliber-specific inserts effectively make the funnel a custom fit for each of your case neck sizes. The Lyman Pro Powder Funnel features a convenient carry case that holds the funnel plus six (6) inserts for 22, .243/6mm, .25/6.5mm, .270/7mm, .308 and .338 caliber rifle cartridges.
4. Graf’s — Sierra 7MM 180g MatchKing, Box of 500 for $169.99
⏺ Excellent F-Open bullet at great price — $33.99 per hundred in 500/ct box
We’ve focused on bullets this week because they’re getting harder to find at a good price. If you’re looking for some great 7mm match bullets at killer pricing, check out these Sierra 7MM HPBT 180gr MatchKings in 500-count box for $169.99. That translates to just $33.99 per hundred (you could pay twice as much for other brands). We can’t remember the last time we’ve seen true match-quality 7mm bullets at this price so stock up now while you can.
5. PMA — PMA Mini Mite Priming Tool, $99.95
⏺ Handy, very precise, with primer depth adjustment
Precision priming tools are favored by many serious reloaders for good reason. These one-at-a-time units permit you to feel how far the primer is seating, even when it’s at crush depth. If you’re in the market for one, check out the Mini Mite Priming Tool from PMA. It features an easily and infinitely adjustable primer depth adjustment (in the head) and easy to swap out primer punch assemblies and utilizes Redding press-type shellholders (one is included with the tool).
6. Sportsman’s Warehouse– Blaze Orange Hunting Gear SALE
⏺ Hunters should wear Hi-Viz orange gear for safety
Hunting season is here. During a hunt, safety is all-important. Many states require Hi-Viz blaze orange safety gear (hats, vest etc.). If you need to pick up Blaze Orange gear for your next hunting adventure, check out the blaze orange assortment at Sportsman’s Warehouse. You’ll find great prices on hats, vests, jackets and more. As a bonus, many of these items can do double duty the rest of the year for personal protection while running or biking on the road.
7. Powder Valley — Shooters World Powders
⏺ We’ve been hearing good things about Shooters World powders
Have you been looking for a good powder replacement for well-known powders that are always out of stock? Head over to Powder Valley where you’ll see a complete selection of Shooters World Powders that can be substituted for your normal powder. These powders have received many good reviews. You’ll find burn rate profiles that work well as substitutes for popular powders such as Varget, H4198, and H4831.
8. Midway USA — Pelican Case Sale — Save 25%
⏺ Some great deals — Add cases to cart to see discounts
We use (and recommend) Pelican cases because they are rugged, secure, and do a great job of protecting your precious arms and optics. Pelican cases always offer good value, but right now you save big (25%) with MidwayUSA’s Pelican Rifle Case SALE. With sale prices up to 25% Off, MidwayUSA is offering deals you can’t find anywhere else. NOTE: You must add each Pelican item to your cart to see the actual discounted price. For example, the Pelican V800 is $149.96 marked down from $199.95 (25% Off). And the Pelican 1750 is $202.46 marked down from $269.95.
⏺ Great for hunters — insert in seconds before taking the shot
Shooters need good hearing protection — you only get one set of ears! While muffs work well, they are not ideal for some situations, such as hunting. When you need easy on/off and light weight, consider Sellstrom Reusable Banded Ear Plugs. These washable 25dB NRR banded plugs rest comfortably around your neck when not in use. Get good protection for under $4. Hunters can keep the band around their neck and then instantly put hearing protection in place when it’s time to shoot.
Share the post "Bargain Finder 265: AccurateShooter’s Deals of the Week"
Everyone should have a 9mm Luger (9x19mm) pistol. The 9mm Luger round feeds/cycles great, recoil is moderate, and a vast array of excellent 9mm handguns are available. Before the Pandemic, quality 9x19mm factory ammo was affordable and widely available. Unfortunately, with the surge in gun buying, and people hoarding ammunition, 9mm ammo is getting hard to find, or has become fairly expensive when you do find a source with ample inventory. To help with that problem, we have located four online vendors who still have 9mm Luger pistol ammo in stock today. You can find other sellers with current, available 9mm inventory on AmmoSeek.com.
NOTE: Inventories change rapidly. If ANY of these entries sell out, check AmmoSeek.com for updates.
9mm Luger (9x19mm) Factory Ammunition — Where to Buy
1. Source: Cabela’s | Product: Remington 9mm Luger Mil 115gr FMJ Brass Case
Cost: $9.99 for 50 rounds ($0.30/round)
Check for availability store by store on 10/20/2020
2. Source: AmmoShop Online | Product: Norma 9mm Luger 115gr FMJ
Cost: $24.39 for 50 rounds ($0.49/round)
In-Stock and available on 10/19/2020
3. Source: Gunslinger Ammo | Product: Belom 9mm Luger 115gr FMJ
Cost: $27.95 for 50 rounds ($0.56/round)
In-Stock and available on 10/19/2020
4. Source: ZincPoint | Product: Venom 9mm Luger 115gr FMJ Steel Case
Cost: $27.50 for 50 rounds ($0.55/round)
In-Stock and available on 10/19/2020
Back in the Good Old Pre-COVID Days…
Yes today’s price of 9mm pistol ammo is high. Consider this — in February 2018 you could get 1000 rounds of CCI 9x19mm PLUS a new Kahr CW9 pistol, all for less than the cost of the ammo alone these days.
Share the post "Ammo Sleuth — Where to Find 9mm Pistol Ammo In Stock"
For this Sunday GunDay article we feature a “blast from the past” — David Tubb’s engineering tour de force, the Tubb 2000, or “T2K” for short. With the remarkable T2K, David earned multiple NRA High Power championships, and David shot the first-ever perfect score in the NRA Long-Range “any sights” championship 16 years ago.
Our write-up this week focuses mostly on “hardware” because David’s performance with the rifle speaks for itself. He has won eleven High Power National Championships at Camp Perry, and in 2004 David mounted a scope to his rifle and captured the Long-Range “any sights” Championship with a 1450/1450, the first and only perfect score ever logged at Camp Perry. He did this all with his trusty 6XC-chambered T2K, shooting the DTAC 115gr bullet in a 1:7.5″-twist Schneider P5 barrel. For more information about this remarkable competition rifle, read on.
[Editor’s NOTE: Because this is an article from our older Archives, some technical details may have changed with time. For all current specifications on TUBB rifles, including the TUBB 2000, visit DavidTubb.com. For more information on the particular T2K rifle featured in this story, CLICK HERE.]
Mag-Feed Action with Unique Bi-Camming Bolt
The action is machined from 17-4 stainless steel to true benchrest quality standards. The design features a solid top with a loading port. This increases action stability, stiffness, and strength. The loading port is easily accessible and is angled to aid the shooter in single loading rounds. The Tubb 2000 is fed via 10- or 20-round box magazines.
“I prefer using 20-round magazines with the Tubb 2000 because it provides a secure hand hold when shooting off the bipod. For across the course competition, the 10-round magazines are the best choice as they do not encumber sling-supported shooting positions. There is no difference in the functioning or reliability of either capacity magazine.”
One-finger Bolt Operation
Low effort bolt operation was a key goal in the design of the Tubb 2000 action. The exclusive bi-camming design employs two cams that engage during bolt lift to radically reduce bolt lift effort. Bolt lift is 75 degrees. The cone-faced bolt has two locking lugs which are narrower and taller than on conventional actions. This design allows the magazine to be mounted higher in the action for smoother, more positive feeding. The bolt handle is designed for superior performance in sustained fire operation. Its ergonomic shape allows operation with a single finger, if desired. The bolt is machined from 8620 carbon steel and rides back into the butt extension, under the shooter’s face so the bolt can be operated without the shooter having to change his head position. This low center of gravity also improves the rifle’s feel and performance under recoil.
The action features a full-length Picatinny rail that will accept Weaver®-style mounts. The action’s adjustable sight mounting system allows the rail to be mounted at one of three pre-set mounting angles — 0, 5, and 10 degrees — to allow the shooter to level the sights to fit his shooting style. A custom base is available to mount match iron sights. All barrels have a small section at the muzzle turned down to accept a clamping-style front sight mount or cant indicator.
The T2K’s Lock Time is ONE millisecond — over three times faster than a Model 70 Winchester.
Barrel Configuration
Tubb 2000 rifles featured hand-lapped stainless steel match barrels with the exclusive “Tubb Contour.” This unique contour maximizes accuracy and minimizes weight — it’s the perfect balance. According to David: “It’s a contour where the barrel wouldn’t shoot one bit better if it was one bit bigger.” The Tubb 2000 was conceived as a “switch barrel” gun — it’s designed to be easily re-barreled by the customer. This feature means that the same rifle can support different calibers and shooting disciplines. Finished barrels in a variety of calibers were available for “do-it-yourself” installations. The gun shown here has a Schneider barrel.
The Tubb 2000 has, over the years, been offered in a variety of chamberings including: .22-250; .243 Winchester; 6mmBR Norma (6BR); 6XC; .260 Remington; 7mm-08; and .308 Winchester. Available accessories include finished barrels, extra 10- or 20-round magazines, cleaning rod guide, adjustable bipods, custom adjustable handstop, fore-end weight rail, and cant indicator.
Trigger, Stock Adjustment and Other Features
The Tubb 2000 uses the superb Anschütz® fully-adjustable two-stage trigger (with safety); one of the finest available to the precision rifleman. This trigger can also be adjusted to provide single-stage operation. The buttstock assembly, forend, buttstock clamping block, and magazine housing, trigger guard assembly are made from 60-series aluminum, hard anodized in the customer’s choice of 6 colors: light and dark teal, purple, red, forest green, and black. (The T2K Tactical (see below) comes in matte black only.) These four parts are each available in any of the listed colors, allowing the purchaser to design his own distinct rifle.
The buttstock is FULLY adjustable for length, height, cant (angle), and offset. The cheekpiece is adjustable for height. An easily accessible knurled wheel allows the shooter to adjust the cheekpiece from the shooting position. Shooter comfort is further augmented by an ergonomic pistol grip. All adjustment features on the Tubb 2000 were designed for easy shooter access. The butt extension, clamping block, shock housing, and buttplate all have index marks to allow the shooter to record and repeat adjustment settings. The tubular fore-end can be rotated and positioned to accommodate the shooter’s preference. An integral accessory rail accepts a custom adjustable handstop or bipod. The fore-end also incorporates a built-in barrel heat wave blocking system which eliminates optical distortion in the sighting plane.”
David Tubb Explains T2K Stock Adjustments
I advocate setting stock length a little longer than most people might. I am a firm believer that it is best to “reach” slightly for the pistol grip as this ensures a strong, secure hold on the rifle. I pull the rifle firmly into my shoulder pocket when shooting offhand, and also prefer to have what I would characterize as very firm contact between rifle butt and shoulder in the sitting and prone positions as well. When using a sling in prone or sitting, stock length (and sling tension) should be great enough so that, at the least, you have to push the buttpad forward with your hand in order to place the stock into the shoulder pocket. My buttstock is shortest offhand and longest prone. If my standing setting is “0”, I’m usually out about 1-1/2 inches for sitting and about another inch for prone. I have found that many people tend to shoot with a stock that’s too long in sitting and too short everywhere else.
I have found the cast off/on adjustment feature on the buttstock to be of great help to me in attaining the natural shooting positions I desire. For prone, I offset the clamping block so the buttplate moves outward [the index mark on the clamp is to the right of center on the scale on the receiver extension tube]. I swing it a little bit inward for offhand and slightly more inward for sitting. The amounts of cast on/off (in clock-face terms) are approximately 6:30 for standing, 4:30 for prone, and 8:00 o’clock for sitting.
Stock Length Adjustment Procedure
The buttstock is adjustable in length 4+ inches. This adjustment is accomplished by moving the buttplate tube in or out after loosening the four screws on the clamping block. Ensure that the buttstock tube is fully contained in the block. The extent of rearward (lengthening) movement is determined by the front of the buttstock tube fitting flush with the front of the block.
Stock Cast and Cant Adjustment Procedure
The buttstock is adjustable for cast or offset by loosening the four screws on the clamping block and swiveling the block on the receiver extension tube. The buttplate itself is adjustable for cant up to 360 degrees and after loosening the screw directly in the center of the rubber recoil pad is adjustable for height at approximately 1-1/2 inches. The cheekpiece is adjustable vertically approximately one inch. The vertical cheekpiece adjustment is accomplished via the top knurled ring. The lower knurled ring will then secure the setting.
About David Tubb — Tubb 2000 Designer
David Tubb is arguably the winningest centerfire rifleman in history. He has won a record eleven NRA National High Power Rifle Championship titles at Camp Perry, along with six NRA Long Range HP Championships. In addition, David is an NRA Silhouette Rifle legend, having won nearly 30 open, individual National Championship titles in all four rifle categories. David has also won seven Sportsmen’s Team Challenge Championships and multiple Wimbledon Cups. His latest big win was the 2019 NRA ELR Championship in Heavy Gun Class.
For more information on the
Tubb 2000 Rifle contact:
David Tubb Accuracy
and Precision Gun Parts
800 N. 2nd Street
Canadian, TX 79014 DavidTubb.com
Phone: (806) 323-9488
If two barrels are better than one, then why not three? That’s the thinking behind the exotic Bockdriling BD14 from Blaser, unveiled at the 2014 IWA Show in Germany. This three-barrel Bockdrilling firearm works as a shotgun, large-caliber rifle, and small-caliber rifle all in one. Even with all those barrels, the BD14 is relatively light, at 3.3 kg (7.26 lbs) without optics. That makes this a nice, carry-around gun for stalking. As you’d expect from Blaser, the twin triggers are crisp and precise, with a pull weight of just 1.43 lbs (650 grams). The front trigger is for the large-caliber rifle barrel, while the rear trigger works both the shotgun and small-caliber barrels, via a tang-mounted selector. These firearms are rare in the USA — and quite expensive. The only Blaser BD 14 we could find on GunBroker had a $9099.95 asking price. That works out to over three grand per barrel.
Here’s what Blaser USA has to say about its unique three-barreled BD 14:
“The ‘Bockdrilling’ is, put simply, an over/under (O/U) rifle-shotgun combination with a smaller caliber rifle-barrel… on the side. The barrel arrangement [allows] for an extremely slender receiver, making the BD14 exceptionally huntable.
The [patent-pending] Vertical Block Lockup… combines an extremely compact and solid block lockup in a closed system within the monoblock with the comfortable handling of a classic break-action rifle.
The double lock permits, if needed, a rapid second shot, the front trigger always releasing the large rifle-caliber. The … barrel selector actives the shotgun barrel when in position ‘top’ and activates the smaller rifle caliber in position ‘bottom’.”
Why Does Anyone Need Three Barrels?
The Blaser website explains: “As hunters, we learn to expect the unexpected, whether in a blind or stalking, so it’s understandable that we dream of a firearm that will allow us to take advantage of any situation. With the Bockdrilling BD14, Blaser has developed the perfect blind and stalking firearm – compromises are finally a thing of the past.”
Design Features of the Bockdrilling BD 14 Tri-Barrel Gun
The BD14 has a double-lock system so that a second shot can be taken without having to recock the firearm. Blaser says: “Thanks to the free-floating barrels, point of impact remains constant even with a quick succession of shots, no matter which barrel was fired first. The extremely strong vertical block lock on the BD14 helps contribute to the high degree of precision.”
Story idea from EdLongrange. We welcome reader submissions.
Share the post "Exotic Gun with THREE Barrels — Blaser Bockdrilling"
We have used NO-LEAD Cleaner in rimfire benchrest rifles similar to this modified Suhl 150-1. It helped restore accuracy with minimal brushing.
Made by the same smart folks that created Wipe-Out™, and Carb-Out™, NO-LEAD Brushless Lead Remover™ really works. Honest. If you are an active rimfire shooter, or if you shoot cast lead-alloy bullets in centerfire rifles and pistols, you should try this product. We now use NO-LEAD in our rimfire benchrest rifles, and in some centerfire guns that receive a steady diet of soft-alloy cast bullets (90%+ lead). (With rimfire guns, you don’t need to use NO-LEAD very often — maybe every 300-400 rounds unless you have a real fouler of a barrel.)
If you’ve got stubborn lead fouling in a rimfire barrel, or on a pistol’s muzzle brake/compensator, you should definitely give this stuff a try. We don’t know how but it does soften lead deposits. The manufacturer says you don’t need brushes, but we found that a bit of brushing (after NO-LEAD application) can help remove more serious lead build-up.
Yes we were surprised to find a lead remover that really works. We tried a half-dozen other lead “cleaners” that promised to dissolve lead and most of them, we discovered, are nearly useless. There’s a reason for that, as the lead alloys used in bullets don’t react to typical petrochemical-based solvents. It took the Wipe-Out chemists over five years to perfect this water-based solution that really does dissolve lead.
NO-LEAD Cleaning Procedure — Read Carefully NO-LEAD Lead Remover is a clear, red gel that is easy to apply. Just swab it in your bore (or on muzzle brakes) with wet patches or bore mop and let it sit for a few minutes. (The manufacturer says you can leave the NO-LEAD for up to 20 minutes, but that long of a dwell time does not seem necessary with our rimfire barrels.) When it contacts lead it will start to foam and you’ll see that the NO-LEAD solvent turns a pastel pink when it dissolves lead. The pink comes from the formation of lead oxide. After the recommended dwell time, simply patch out the dissolved lead deposits (you can also use a nylon brush for stubborn lead build-up).
NOTE: After cleaning, it is very important that you get all the NO-LEAD out of your barrel, and neutralize it. We recommend following the application of NO-Lead with Wipe-out or Patch-Out to neutralize the NO-LEAD, clear the bore, and remove residual carbon and copper fouling. If you don’t have Wipe-Out or Patch-out, flush the barrel thoroughly with Rubbing Alcohol or even a solution of Dawn dish detergent — then re-oil the bore.
Be Sure to Neutralize NO-LEAD After Use
Remember that N0-LEAD is a strong, slightly acidic chemical that needs to be neutralized after use. If you leave it on a nice, blued barrel for too long, it can harm the bluing. NO-LEAD will remove all the surface oils from the barrel bore. For this reason it is recommended that you neutralize NO-LEAD with Wipe-Out, or Patch-Out, which both contain effective corrosion inhibitors. If you don’t have those products, once you’ve flushed the NO-LEAD with something like rubbing alcohol, then follow with a gun oil. Caution: A petroleum-based gun oil will NOT, by itself, neutralize NO-LEAD. You need to neutralize first, then apply the corrosion inhibitor (or do it all in one step with Wipe-Out or Patch-Out).
Where to Buy NO-LEAD Lead Remover
NO-LEAD Lead Remover costs $16.99 for an 8 oz. squeeze bottle with a flip-top spout. This product is sold directly by Sharp Shoot-R Precision Products through Sharpshootr.com, or you can purchase NO-LEAD through many other online vendors. For more information, send an email via the Sharp Shoot-R Contact Form or or contact SharpShoot-R at (785) 883-4444. You can ask for Terry Paul, Sharp Shoot-R’s owner and the master chemist who developed the NO-LEAD formula.
Every serious competitor needs a good spotting scope support. Spotting scopes are not just for iron sights shooters. Even if you have a powerful riflescope, the spotting scope, typically set at 15-25X magnification, lets you observe wind flags, mirage, and other shooters’ targets. If you are looking for a high-quality, made-in-USA support for your spotter, consider the Polecat V2 system from Creedmoor Sports. Our friend Gavin Gear of UltimateReloader.com recently posted this video review:
Creedmoor Sports has offered excellent products for competitive shooters for decades. The Made-in-USA Polecat V2 system is updated version of Creedmoor’s best-selling spotting scope stand. After collecting feedback from shooters across many disciplines for several years, the designers brought some major advances to this scope stand. First, no pretension are adjustments needed. Horizontal and vertical resistance is controlled by the knurled tightening knob. Second, the Polecat boasts a pre-aligned Delrin clamp so you don’t have to spin the clamp to align with the rods during stand assembly. You can order a Polecat V2 with 3/4″-diameter rod for $296.95 or get the 1″-diameter rod version for $364.95.
Either version can be used for both left-handed and right-handed shooters, with about 5″ standoff from the center of the stand to the scope’s centerline. Polecat V2 packages include head, stop collar, one extension rod, and base. Additional aluminum rods are available to extend height.
Polecat V2 Key Features
— Adjustable head (spotting scope mounts to head)
— Bump stop (protects spotting scope from accidental knock if dropped)
— Base with three fold-out legs
— Leveling adjustment for uneven ground (one leg can be adjusted downward, faced in downhill direction)
— Zero play (slop), giving you the ability to quickly and easily make adjustments
— One-handed operation/adjustment
— 1/4″-20 standard spotting scope thread
— The scope may be positioned above or below the scope head
As part of NRA Women TV, hunting guide Kristy Titus hosts a series of videos that explain important strategies and shooting skills for hunters. Titus is a certified instructor who has hunted around the globe. She grew up in the outdoors, running pack mules in Oregon with her father. In these videos, Kristy discusses demonstrates field positions that can be employed during a hunt. She also explains preparation for a hunt, including fitness training.
Shooting Positions and Rifle Support in the Field
Because of interferring terrain features, it’s not common to get a prone shot on game. That’s why hunters nead to practice shooting from various positions. You can use tree limbs or boulders for support (see above). In addition, many hunters bring bipods or tripods to help make that once-in-a-lifetime trophy shot. We have used telescoping Bog-Pod supports on varmint hunts. In this video, Kristy explains various shooting positions and training routines.
Fitness Training — Prepare for the Trek
Kristy explains: “Hunting can lead you into some steep, rough country. It’s really important that you train both your body and your mind to handle the elements and the rigors of hunting. With no two hunting situations being the same, we must train to be adaptable and make the most of every opportunity. The most important aspect of hunting success, ultimately, is the person behind the rifle. So, if you plan on going on a mountain hunt, get out and train your body. Train with your firearm. Get off the bench and have some fun with this. Do some positional shooting or, if you want to add a stress dynamic… have someone put you under a time parameter.”
“When it comes to bolt-action rifle fit, there is no ‘one size fits all’,” says Titus. “When picking out your rifle [consider options] after the purchase to ensure you are as comfortable as possible.”
Share the post "How to Have Success on Your Hunt — Tips from Kristy Titus"
The November 3rd election is just 18 days away. If Joe Biden wins, he has promised an aggressive anti-gun agenda starting with further restrictions on semi-auto rifles. Joe’s running mate Kamala Harris said she would enforce gun control via Executive Order. Gun confiscation by Executive Order happened in Canada when Prime Minister Trudeau, without legislative approval, ordered Canadians to turn in their magazine-fed semi-auto rifles.
So, is it time to finally get an AR-platform rifle? Or get another if you already have one? Only you can decide that, but we have identified three great AR deals — two complete lowers under $190 and a complete AR Carbine for under $550. And yes, these are all IN STOCK NOW. Check out these deals:
PSA Complete Lower with Adjustable Stock — $179.99
Complete Palmetto State Armory AR lower is fully assembled. It will take take standard complete uppers, which you can build or purchase later without an FFL. The lower is the section that much be purchased through an FFL with a background check.
Machined from Aluminum Forgings 7075-T6
Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
Milspec diameter Receiver Extension
M4 Stock
Staked M4 Lock Nut
Standard Carbine Buffer
Un-notched Hammer compatible with 9mm use
PSA Complete Lower with Adj. Magpul FDE Stock — $199.99
Complete Palmetto State Armory lower with Magpul Flat Dark Earth grip and stock is fully assembled. It will take a standard complete upper, which you can build or purchase later without an FFL. The lower is the section that much be purchased through an FFL with a background check.
Machined from Aluminum Forgings 7075-T6
Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
Milspec diameter Receiver Extension
Magpul MOE Stock, Flat Dark Earth
Magpul MOE Grip, Flat Dark Earth
Staked M4 Lock Nut
Standard Carbine Buffer
Enhanced Polished Trigger (EPT)
Un-notched Hammer compatible with 9mm use
PSA 16″ Freedom Rifle Olive Drab ($539.99) or Black ($549.99)
This is a full, complete AR15-type rifle with 16″ barrel, and M4-type receiver. Twist rate is 1:7″. Sold complete, except for magazine. This same rifle is also available in all-black for $549.99. This rifle must be transferred through an FFL with background check.
Barrel Length: 16″
Barrel Profile: A2
Barrel: A2 Profile, Chrome Moly Vanadium, Nitride finish
Muzzle Thread Pattern: 1/2″ x 28
Twist Rate: 1 in 7″
Barrel Extension: M4
Gas System Length: Midlength
Receiver Material: Forged 7075-T6
Receiver Type: M4
Handguard Type: Mid-Length Classic with heat shields, ODG
Fire Control Group: Standard Mil-Spec Trigger Group
Grip: A2-style, ODG
Stock: M4-style, ODG
Overall Length: 32 inches
Weight (as configured): 6.8 lbs
Jim Borden of 
Trigger, Stock Adjustment and Other Features
Stock Cast and Cant Adjustment Procedure
Made by the same smart folks that created Wipe-Out™, and Carb-Out™, 
Where to Buy NO-LEAD Lead Remover
