As an Amazon Associate, this site earns a commission from Amazon sales.











February 27th, 2021

Gear Review: Lyman Reloading Press Stand — “It’s a Keeper”

lyman universal press stand review Dillon 550 Forster Co-Ax bench lift reloading

I absolutely love using this press stand. I use it with my Forster Co-Ax as well as my Dillon 550. The stand mounts those presses at the right height to minimize fatigue and maximize torque. Some products I merely review and return but this one is a keeper and won’t be leaving my bench anytime soon. — F-Class John

Lyman Universal Press Stand REVIEW

Product Review by F-Class John
Positioning your press at the optimal height is one of the oldest problems in reloading. Most presses sit low off the edge leading to uncomfortable arm strain or inconsistent pressure being applied while using. Lyman has set out to fix that problem with a reasonably-priced ($54.99 at Midsouth) press riser that works with the vast majority of reloading presses. This unit will raise just about any press up off your bench securely, allowing you to working more comfortably from a standing position. This also frees up vital bench space UNDER the press. Unfortunately this press stand is so popular it is back-ordered at most vendors.

lyman universal press stand review Dillon 550 Forster Co-Ax bench lift reloading

I have used a variety of presses over the years. At times I’ve run into issues mounting a press at a level that doesn’t promote arm or hand strain during normal operations. In the past I’ve used blocks of wood or even tried other brands’ proprietary stands. But I had very limited success with those options. Accordingly, I was very excited to give the Lyman Universal Press Stand a chance.

Lyman’s Universal Press Stand comes complete with side plates, two different top plates, and a large collection of mounting hardware. The two top plates are pre-drilled for numerous popular Single Stage or Progressive presses. Helpful diagrams and instructions show which side of the top plate you need to use. The pre-drilled holes accommodate a variety of presses from RCBS, Dillon, Lyman, Redding, and Hornady. But surprisingly, the plates are not pre-configured for the Forster Co-Ax Press.

CLICK to WATCH VIDEO Showing Lyman Universal Press Stand

Setting up the stand was very simple. The two sides bolt to the lower shelf unit at which point you attach the top plate. All the supplied bolts made this a breeze and once everything was snugged down, I was able to place it on my bench where I wanted it and mark the drill holes to mount it. After securing the stand to my bench it was time to mount my press.

Lyman Universal Press Stand with Dillon 550 Press

lyman universal press stand review Dillon 550 Forster Co-Ax bench lift reloading

Adapting Lyman Universal Press Stand for Forster Co-Ax
At the time of testing I was primarily using a Forster Co-Ax press. With no pre-drilled Co-Ax configuration for either Lyman top plate, I decided to customize the blank side of one of the top plates. I opted to position the mounting holes so that the press could sit 100% on top of the mounting plate and not just off one edge. I found this process simple to execute. Mark your drill holes, then drill the plate. This can easily be done with regular drill bits although using a step-bit worked faster and cleaner to help enlarge the holes just a little when I needed some extra clearance.

lyman universal press stand review Dillon 550 Forster Co-Ax bench lift reloading

Lyman Universal Press Stand Is Stable and Strong
Once set-up, I found the stand to be incredibly stable. The design allows for full force to be applied to the press no matter what the operation. Having used this Lyman Press stand regularly over the past few months with both my Co-Ax and a Dillon 550c, I still find myself loving it. The height is perfect and allows me to load as much as I like without straining my arm or getting fatigued. With an attractive price point (under $55.00 street price) and a simple design, I feel this is a great system for those looking for a secure and raised platform for their reloading presses.

The Universal Press Stand comes with two plates. If you have different presses that fit each plate you could easily swap presses just by changing plates while leaving the presses attached. It’s less functional if you have two presses that share one plate and would require removing one press before installing the next one.

lyman universal press stand review Dillon 550 Forster Co-Ax bench lift reloading

Lyman Press Stand Unboxing and Set-Up (KFW Video Review):

Permalink - Articles, - Videos, Gear Review, Reloading, Tech Tip No Comments »
February 27th, 2021

Fundamentals of Marksmanship — Learn from a Champion

USAMU Basic Riflemans Course SFC Brandon Green High Power Shooting Training

The U.S. Army Marksmanship Unit (USAMU) has produced an excellent series of videos covering the Basic Rifleman’s Course. If you are getting started in High Power shooting, or want to improve your position shooting skills, this series is well worth watching. And these videos are not just for service rifle shooters — even bench shooters can benefit from these videos, particularly Part 5, which explains how to estimate wind speed and direction. The lead instructor for these videos is SFC Brandon Green, three-time National High Power Champion, and 2017 Service Rifle Champion. When SFC Green talks, you should listen.

SFC Brandon Green is a shooting superstar. Green won his third NRA National High Power Rifle Championship in 2018 at Camp Atterbury, Indiana. He dominated the HP Championship cycle, finishing eight points and ten Xs ahead of his nearest competitor. Brandon also won High Power National Championships in 2015 and 2013. One of the greatest marksmen in the nation’s history, SFC Green excels at all positions, both rapid-fire and slow-fire.

Part 5 — Wind and Weather Estimation (Very Useful for All Shooters)


Note: This video includes a hit location “target analysis” in the first 6 minutes.

Part 4 — Minute of Angle Explained

Part 3 — Ballistics and Zeroing

Part 2 — Positions, Sight Alignment, and Natural Point of Aim (Very Useful)

USAMU Basic Riflemans Course SFC Brandon Green High Power Shooting Training

Part 1 — Aiming and Sight Picture

SFC Brandon Green 2017 CMP Camp Perry USAMU Service Rifle
SFC Brandon Green (left above) has set multiple National Records at Camp Perry.

Permalink - Videos, Competition, Shooting Skills, Tactical No Comments »
February 27th, 2021

Indoor Range Etiquette — Safe Gun Practices Indoors

Safety Video NSSF Indoor Range Etiquette

There has been a long, cold winter in many parts of the USA. So if you want to maintain your shooting skills, shooting indoors may be the only convenient option. When shooting indoors you should always be extra careful and follow all key gun safety practices and adhere to proper range “Etiquette”.

The NSSF (NSSF) offers a useful Range Safety and Etiquette video. This 8.5-minute video explains safe practices, especially at indoor ranges. In the video, the moderator list the basic rules of gun safety, before covering key range etiquette topics such as range officer commands, how to uncase your firearm on the range when you first arrive, and what to do if a firearm is accidentally dropped. There are also safety tips specific to handling both semi-automatic handguns and revolvers.

Safety Video NSSF Indoor Range Etiquette

BAD RANGE BEHAVIOR — Five Things NOT to Do at the Range

Here are the five worst behaviors we’ve seen at indoor ranges. These behaviors are both dangerous and inconsiderate. Any one of these behaviors can get you permanently banned from an indoor range.

1. Sweeping other individuals after loading a weapon behind the firing line is very bad. All your weapons should be empty until you reach your shooting station.

2. Turning the handgun sideways while trying to clear a malfunction or insert/remove a magazine. This will point the muzzle at a fellow shooter. Or, after shooting a gun, the shooter fails to clear the weapon and then places the gun somewhere near the shooting station with the muzzle in an unsafe position.

3. Reacting unpredictably when firing a high recoil handgun. We’ve seen people take a second shot by accident with the muzzle way off target.

4. Not obeying range commands — in particular continuing to shoot during called cease-fires.

5. Poorly aimed shooting that hits target frames or carriers, causing ricochets.

Double-Up on Hearing Protection When Shooting Indoors
When shooting pistols indoors we recommend quality muffs with earplugs underneath, offering double protection. When inside an enclosed range, with other shooters blasting away right next to you, you really need effective hearing protection. But you also need to hear range commands and be able to communicate with your fellow shooters. That’s why we recommend electronic muffs with plugs underneath.

Howard Leight Impact Pro Electronic Muffs NRR 30

Permalink - Videos, Bullets, Brass, Ammo, Handguns, Shooting Skills No Comments »