Former Army Ranger sniper instructor Ryan Cleckner is the author of the best-selling Long Range Shooting Handbook. Cleckner hosts a series of videos that cover shooting techniques appropriate for tactical and PRS-type disciplines. Here are five short videos that cover various aspects of shooting techniques and rifle set-up. We think PRS/NRL competitors (and long-range hunters) can benefit from these videos.
“Consistency is the key to accuracy.
You need to think about a system of how you’re going to shoot that is not only comfortable, but [is] repeatable when you’re shooting.” — Ryan Cleckner
In this first video, Cleckner explains proper scope position. Ryan finds that some shooters place the scope too far forward or too far rearward. If the scope is too far back you may have issues with eye relief and stock reach to shoulder. If it is too far forward, you may have cheek-weld problems or get neck strain.
Cleckner offers a simple method to check your scope position: “To see if your scope is set up properly … close your eyes, lay your head on your gun, get completely comfortable, and only when you are set-up, then open your eyes. If you can’t see clearly through your scope, CHANGE something [such as comb height or scope position]”. “When you open your eyes, if you see some scope shadow [i.e. the black ring around the edge of the scope picture], figure out which way you need to move your head to get rid of that shadow, and then make adjustments to either your position, the rifle, or the scope.”
Cleckner prefers shooting off a bag when in the prone position, when that is practical. The bag provides a more stable support than a small Harris-type bipod, doesn’t require pre-loading the rifle, and there is less bounce or hop on recoil.
Former Army Ranger sniper team leader Ryan Cleckner explains how important it is to keep your rifle straight up and down when long-range precision shooting. Cleckner demonstrates with an AR-10 modern sporting rifle how slight cant to your rifle can cause a miss over long distances.
Here Cleckner covers some of the basic points of trigger control on tactical-style rifles. These basic principles apply to both single-stage and two-stage triggers. NOTE: For benchrest rigs, with ultra-light pull weights, more refined techniques may be appropriate.
In tactical events, when you’re shooting on the clock and loading from a detachable magazine, you should manipulate the bolt smoothly but strongly. Here Cleckner demonstrates how to cycle a tactical-type rifle. He says, “You should be running the bolt on your rifle with authority. Run it like you mean it!” NOTE: Completely different techniques are appropriate for custom benchrest rifles that manually feed.
Long Range Shooting Handbook — A Good Resource
Cleckner’s Long Range Shooting Handbook covers a wide range of topics important for precision marksmanship — both shooting skills and technical matters. You can view Sample Chapters from Ryan’s Book on Amazon.com. Cleckner’s book is designed as an intro to key concepts such as MOA vs. Mils, External Ballistics, and Environmental Effects. Included are personal tips and advice based on Cleckner’s years of experience as a sniper instructor and special operations sniper.
The Long Range Shooting Handbook is divided into three main categories: What It Is/How It Works, Fundamentals, and How to Use It. “What It Is/How It Works” covers equipment, terminology, and basic principles. “Fundamentals” covers the theory of long range shooting. “How to Use It” gives practical advice on implementing what you’ve learned, so you can progress as a skilled, long range shooter.
Share the post "Practical Tactical — Training Video Series with Ryan Cleckner"
In the archives of The First Shot (the CMP’s Online Magazine), SGT Walter E. Craig of the USAMU discusses physical conditioning for competitive shooters, particularly High Power competitors. Fitness training is an important subject that, curiously, is rarely featured in the shooting sports media. We seem to focus on hardware, or esoteric details of cartridge reloading. Yet physical fitness also matters, particularly for High Power shooters. In his article, Craig advocates: 1) weight training to strengthen the Skeletal Muscle System; 2) exercises to build endurance and stamina; and 3) cardiovascular conditioning programs to allow the shooter to remain relaxed with a controlled heart beat.
SGT Craig explains: “An individual would not enter a long distance race without first spending many hours conditioning his/her body. One should apply the same conditioning philosophy to [shooting]. Physical conditioning to improve shooting skills will result in better shooting performance[.] The objective of an individual physical training program is to condition the muscles, heart, and lungs thereby increasing the shooter’s capability of controlling the body and rifle for sustained periods.”
In addition to weight training and cardio workouts (which can be done in a gym), SGT Craig advocates “some kind of holding drill… to develop the muscles necessary for holding a rifle for extended periods.”
For those with range access, Craig recommends a blind standing exercise: “This exercise consists of dry-firing one round, then live-firing one round, at a 200-yard standard SR target. For those who have access only to a 100-yard range, reduced targets will work as well. Begin the exercise with a timer set for 50 minutes. Dry-fire one round, then fire one live round and without looking at the actual impact, plot a call in a data book. Continue the dry fire/live fire sequence for 20 rounds, plotting after each round. After firing is complete, compare the data book to the target. If your zero and position are solid, the plots should resemble the target. As the training days add up and your zero is refined, the groups will shrink and move to the center.”
Fitness training and holding drills help position shooters reach their full potential.
Training for Older Shooters
Tom Alves has written an excellent article A Suggested Training Approach for Older Shooters. This article discusses appropriate low-impact training methods for older shooters. Tom explains: “Many of the articles you will read in books about position shooting and the one mentioned above are directed more toward the younger generation of shooters in their 20s. If you look down the line at a typical high power match these days you are likely to see quite a few folks who are in their middle 30s and up. Many people in that age range have had broken bones and wear and tear on their joints so a training program needs to take that into account. For instance, while jogging for an extended period for heart and lung conditioning may be the recommended approach for younger folks, it may be totally inappropriate for older people.”
Tired of carrying old-fashioned paper Score Books? Well now you can go digital — Creedmoor Sports offers a full-featured Scoring Book App that lets you plot your shot locations/scores using an Android device or Apple iPhone or iPad. The price is right — FREE! Just visit the Apple App Store or Google Play Store to download the App for FREE.
Record Match and Practice Data
This new App, available for free in the Apple App Store, and the Google Play Store provides all the same functions and capabilities of the traditional, spiral-bound print-format Creedmoor Rifle Data/Score Book, but with the convenience and ease of recording your match and practice information with your mobile device. With this App you can break your 20 shot slow-fire segments into either 10- or 20-shot targets, and also opt for sighting shots. All the specific event data can also be recorded, such as location, wind, light etc., along with wind and elevation adjustments.
COMMUNICATIONS Restrictions: In some matches you are not allowed to have electronic communication ability, so you may have to set your iPhone to “Airplane Mode”, or use this only with an iPod (which does not have two-way communication capability).
Share the post "Get FREE Data Book Scoring App for Android and iOS (Apple)"
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. KYGUNCO — Anderson AM-15 (AR) Lower Receiver, $89.99
⏺ More gun control is coming — get an AR lower while you can
With the developments in Washington, it will likely become more difficult to purchase an AR-platform rifle in the future. You may want to get an AR lower now, while you can, at a reasonable price. KYGUNGO (Kentucky Gun Co.) is selling the Anderson AM-15 AR15 Lower Receiver for just $89.99 (cash price) or $92.69 (credit card). This is a mil-spec 7075 T6 Forged aluminum lower, Type 3 Hard Anodized. Flat-Rate Shipping to your FFL is just $11.99. These will probably sell out quickly.
2. Midsouth — Delton AR-15 Lower Parts Kit with Grip, $52.99
⏺ Very complete AR-15 parts kit at low price
Here’s what you need to fill up that AR-15 lower receiver featured above. This Delton Complete Lower Receiver Parts Kit contains all the attachment pins, trigger system parts, and springs you need, along with a classic AR grip. Installation is straight-forward with instructions available online.
3. Amazon — Tipton Best Gun Vise, $84.84
⏺ Versatile, stable, works with all rifles, including ARs
You need a stable platform when cleaning your long guns, but most gun cradles are too light or unstable to do the job properly. If you’re looking upgrade to a better solution, grab the Tipton Best Gun Vise. The vise was designed to accommodate the widest possible array of firearms for cleaning, maintenance, or gunsmithing. This vise is easily configurable to handle bolt-action rifles, break-open shotguns, AR-15s, and handguns. You can also purchase this excellent Gun Vise for $89.99 at Midsouth Shooters.
⏺ Hard to beat bench at this price; swivel seat, 60-lb total weight
The Caldwell® Stable Table, a 60-lb tripod-style bench, offers a 34″L x 23″W top surface with a bench seat that adjusts from 16″ to 22″ in height. The polymer top has two integrated carry handles. These handles double as anchors for two gun-holding forks that can be used when cleaning your rifle. Leg adjustments keep the table and seat parallel even on uneven ground. The overall unit breaks down into seven pieces using a quick-release pin system. Maximum weight capacity is 350 pounds. This bench has earned 80% 5-star reviews from actual purchasers.
⏺ Great deal on easy-to-use, accurate, barrel-attached Chronograph
Priced at just $159.99 at MidwayUSA, the Magnetospeed Sporter model costs less than half as much as Magnetospeed’s V3 models. This chronograph attaches directly to your barrel so you don’t have to go downrange to set up skyscreens. For most people the Sporter Model contains all the features they need. Using Magnetospeed’s XFR adapter (sold separately), data can be transferred easily to your mobile device. READ Magnetospeed Sporter Review. NOTE: You MUST add the item to cart to see the $159.99 SALE price. This typically sells elsewhere for around $180.00.
6. EuroOptic –$100 Rebate on Leupold SX-4 Spotting Scopes
⏺ Instant $100 savings on excellent HD Glass spotting scopes
Get Instant Savings of $100 with the purchase of any SX-4 Pro Guide HD Spotting Scope. Offer valid February 1, 2021 through April 4, 2021, while supplies last. Leupold offers SX-4 HD spotters in 65mm objective and 85mm objective models, with both angled and straight versions. If you can’t find your preferred SX-4 in stock at EuroOptic, this Rebate will be available at other authorized Leupold dealers such as Grafs.com.
7. MidwayUSA — Caldwell Rock BR Rest + Bag, $99.99
⏺ Good inexpensive system for varminters or sight-in duties
Here’s a great bargain for someone looking for a basic functional benchrest set-up. This Caldwell Rock BR Rest and Bag Combo could be a gift to a family member or a junior shooter. Or this $99.99 combo would suffice for someone testing a hunting rifle. The front rest adjusts for both windage and elevation.
⏺ Owners say it is sharp with good features for price
This Sawback Bowie spring-assisted folding knife, just $10.95 on Amazon, has a 3.5″ blade. There is a curved cutting edge with a serrated section near the handle. Actual purchasers state: “This knife is very well made with a tight feel. No play at all. The assisted open is excellent [and] they come very sharp too”, and “This is a good quality knife. It’s solid and a bit heavy, really good looking and comes pretty sharp. Overall its a great knife.”
⏺ Great accessories for safes — light alone is worth the price
This Lockdown Safe Accessory Package includes one Large Organizer, a Vault Light, and a Large Document Holder. The bright LED Vault light runs on AAA batteries so no wiring is needed. The Document holder easily mounts to your safe’s door or sidewall. And the Large 18″x12″ Organizer will secure valuables, knives, and even small handguns. It comes with hooks for carpeted interiors and magnets for metal interiors. This KIT normally sells for $49.99 so it’s a STEAL at $12.99 — that’s 74% OFF.
Share the post "Bargain Finder 283: AccurateShooter’s Deals of the Week"
In a recent Federal Season Podcast, Federal Ammunition’s President Jason Vanderbrink discusses the shortages of loaded ammunition we have experienced for many months now. And it’s not just loaded ammo — powder and primers are very hard to find and prices are crazy, with 1000 primers selling for $300 or more in recent Gunbroker auctions.
This Federal Podcast episode attempts to answer key questions about the unprecedented demand for ammunition. Ammo buyers want to know what caused the shortage, when supplies will become normal again, and what Federal and its sister brands are doing to meet consumer needs.
Click Green Arrow to Start Podcast Audio:
Fast forward to 00:45 to skip intro.
We applaud Federal for addressing the issue. Many shooters think there is some kind of conspiracy — suggesting that the Federal Government is buying all the ammunition, or that companies such as Federal or Hornady have halted production. That’s nonsense. In fact Federal, Hornady, and Olin (Winchester) are all running at full capacity.
However, consumer demand has increased dramatically. This is because of political developments, with tens of millions of gun owners fearful that the new Democratic administration will impose new taxes or restrictions on ammo. In addition, demand has been driven by new gun owners. The NSSF tells us that over 7,000,000 Americans purchased their first firearm in 2020. If each new gun buyer purchased just two, 50-round boxes of ammo, that equates to 700,000,000 rounds of ammo. Think about that… the gun industry would have to produce an additional 1.91 million rounds of ammo EVERY DAY just to fill the demands from new gun owners.
In the podcast Federal’s President Vanderbrink emphasized that Federal is running at full capacity. Vanderbrink also discusses the shortages of components, particularly primers, which are produced by both Federal and sister company CCI.
Vanderbrink pointed out that Federal had been at less than full capacity in 2017-2019, but Federal had also invested in new capacity over the last five years and that investment is now paying off: “We are investing where we need to invest… we have hired hundreds of new workers.”
Primers Are in Short Supply Because They Are Being Used in Loaded Ammunition
Vanderbrink explains why primers are not getting to retail outlets. The answer is that Federal is using a larger percentage of its own primer production for loaded ammunition. “We are making a lot more ammunition today. Our internal primer needs have gone up exponentially as we are shipping more ammunition. [Previously] we’d sell excess [primer] capacity to the reloading market. As the ammunition business picked up in March 2020, it came at the expense of the reloading primers. We are taking a bigger share just to make our ammunition” (Podcast 08:30 – 09:50)
Remington Bankruptcy DID Affect Ammo and Primer Supplies
Remington’s business problems HAVE reduced ammo supply said Vanderbrink: “When we acquired Remington, that factory wasn’t making hardly any ammunition, so that just starved that market already that was constrained. As we’re getting Remington up and going right now, we’re going to make more ammunition, so the market WILL have more ammunition[.] Along with the social unrest, along with the Pandemic fears that people had… you had Remington not making much ammunition, so that just added to the backlog.” Vanderbrink noted that Federal acquired the Remington factory in October and it plans to increase Remington ammo production significantly over previous levels.
(Podcast 10:20 -11:20)
Ammunition Shortage is NOT Caused by Federal Government Buying Everything
Vanderbrink also said flat out that the shortage has NOT been caused by huge new government ammo buys or Federal redirecting production to the government. The allocation to the commercial sector is actually higher than in recent years.
Vanderbrink asked for patience. While conceding that the pandemic has created challenges, Vanderbrink declares that the ammo plants are running at full capacity: “We know, ammo seems hard to come by right now. But rest assured, we are building and shipping more and more every day[.]”
Share the post "What Caused the Ammo Shortage? When Will Things Get Better?"
A while back, our friend Dennis Santiago was conducting training for a Southern California Police Department. During a training session one of the unit’s AR15s stopped functioning. The problem — the bolt in the AR rifle broke in half. Dennis states: “They ran the gun dry, broke for lunch, shot it again. They don’t like that. I personally like to flood the bolt wet with lube on training days. It prevents stuff like this. Given that, it’s a simple remove-and-replace fix.”
Here are some of the more interesting comments about this parts failure — an AR bolt that literally sheared in half:
“If I was a betting man [the steel] wasn’t made by Carpenter Steel. They are one of the few companies that use the correct [milspec-steel, C-158] called out on the drawing which they coincidentally developed. Most of the other companies that make [AR Bolts] use different steel with the same heat treat specification as what is called out which gives them the potential of being a little on the brittle side at the upper end of the tolerance. When it comes to the AR platform, bolts are probably the only part of the entire gun where I must admit to being a little bit of a brand snob.” David O’N.
[Editor’s Note: Actually Carpenter Steel does not make AR bolts. They are a steel supplier, and yes Carpenter did develop the original C-158 steel for AR bolts. Here is a contrary view, claiming that AISI 9310 Steel is actually stronger than milspec Carpenter C-158: 9310 Steel for AR Bolts.]
“Dry bolt and carrier shouldn’t cause that. Looks like a big pressure spike. What kind of ammo…?” Guy G.
Reply from Dennis: “55gr factory ammo. Piles of it.”
“Is that the new two-piece bolt everyone’s been talking about LOL?” — Darren R.
“Let me guess…the PD called you in cause they didn’t know why it stopped going ‘pew pew’?” — Jim O.
Reply from Dennis: “I was there today for qualifications. It broke during the rifle phase. Simple enough to fish the bolt parts out of the action. The training didn’t miss a beat. I have an armory full of the things.”
Share the post "AR-15 Critical Failure — Bolt Breaks into Two Pieces"
Spring is coming soon, and that means it’s time to get ready for early varmint season. Here are eight great rifles from our Shooters’ Forum Favorite Varmint Rifles Thread. You’ll see a variety of action types and stock designs, both custom and factory. And we’ve featured a wide range of chamberings, from 17 Fireball up to a .243 Super Rock Chucker (aka 6mm-06). The common factor is serious accuracy. All these rigs are great shooters that have brought smiles to their owners while bringing doom to varmints.
1. Rem 700 in 20-222 — with Birthday Gift Barrel from Dad
This is proof that you don’t have to spend a fortune to have a great varmint rig. Forum member JDS Holler posted: “Here’s my baby, ‘Plain Jane’. I took a $500 birthday check that my Dad gave me, and ordered a great barrel from PacNor, chambered in 20-222. I got busted up in a fall, and had four months down time to accumulate the components to add to my old .222 Rem 700 donor action. I couldn’t be happier with the outcome. That old Bushnell has been replaced by a Vortex Viper, and this rifle just flat shoots.”
2. 6 BRA with Krieger Barrel from Alex Wheeler
Alex Wheeler of Wheeler Accuracy knows a thing or two about accurate rifles, having built many match-winning benchrest rifles. For varmint work he likes the 6 BRA (BR Ackley) wildcat cartridge: “My favorite varmint setup is this 6mm rifle with BAT SV action in a Nesika bay varmint stock with a 1:8″-twist Krieger HV contour barrel chambered for 6 BRA. I like the 6mmBR and variants (Dasher, BRX, 6BRA) with zero freebores.” He gets great results with 55-60 grain Sierras and Noslers with H322 powder: “I shot 55 Sierra Blitzking, 55 Nosler Ballistic Tip, and 60gr Sierra Varminter HP. H322 was the best powder. Jam ‘em 10 thou in the rifling — and of them — and man they were like magic.” Alex also feels the 6mm rifles are easier to tune than 22-caliber varmint rigs and the 6mm barrel throats last longer. He often puts an older 6mm match barrel on a varmint gun and it still holds quarter-MOA.
Alex recommends sticking with a 1:8″-twist even when shooting light 6mm bullets. The extra RPM makes the bullets MUCH more explosive on critters: “I’ve done one 1:13.5″-twist and I’ll never do that again. I’m not kidding, with the 8-twist it’s twice as energetic. It can lift those ground squirrels 20 feet in the air. With the 13.5-twist it’s not half that.”
About the Suppressor — The rifle is wearing a “can” in the photo. However, Alex tells us that he now avoids suppressors for most varmint work: “I didn’t like the suppressor — it put off so much heat that the mirage was terrible. With the heat mirage, after 5-10 shots you couldn’t see. I learned my lesson. I pulled that sucker off after the first time I shot it.”
3. 6mm Dasher in Convertible Laminated Stock
The 6mm Dasher has won many benchest matches, and it’s also an ultra-accurate varminting cartridge. This Dasher belong to Forum member MTLager who posted: “Here’s my baby — 6 Dasher with BAT SV action. First one built. Serial number PT1.” This impressive rig features a tack-driving, 1:8″-twist Brux Heavy Varmint contour barrel. This rig is “Smokin the 75gr V-Maxs” reports MTLager. The stock is very interesting. MTLager explains: “This is a Richard Franklin laminated blank made into a stock by J.T. Barber. It has a 3″-wide fore-end for varmint shooting. But I can change the front to 4″-width and a rear section can be removed.” The angled rear “toe” of the buttstock can be taken off, allowing a flat, straight bottom for benchrest competition.
4. Slick 17 Fireball with BAT Action and Stunning Stock
This rifle is almost too pretty to carry out into the varmint fields. Look at that wood! This handsome small-caliber varminter belongs to Forum member “20 TAC”. Chambered for the 17 Fireball wildcat (.221 Fireball necked down), this rig features a BAT Action, Jewell Trigger, and a custom exhibition-grade walnut stock sporting a true ebony fore-end cap. The checkering is exceptional. Owner 20 Tac report this rig “shoots 20 grain V-Max bullets with H4198 very well.” That’s a Nightforce scope on top.
5. 6mmBR in McMillan Stock with Krieger Barrel
This website stated 17 years ago as 6mmBR.com, so we had to include a classic 6mmBR Norma in today’s varmint rifle line-up. Forum member Powderbrake posted: “Here is my favorite varmint rifle — [a 6BR with] Stiller Predator V RBLP action, bedded in a McMillan stock.” This accurate varminter features a 1:8″-twist 6mm Krieger barrel and Jewell trigger. Up top is a Nightforce NXS 8-32x56mm scope. Below are the owner’s key gear items: Leica Laser-Rangefinding Binoculars, Smartphone with Applied Ballistics software, and Kestrel Weather Meter. Powderbrake told us he recently upgraded to a Model 5700 Kestrel with ballistics software and LiNK. (Editor: The $399.00 Kestrel 5700 has ballistics software, but if you want the full Applied Ballistics suite, order the $699.00 Kestrel 5700 Elite).
6. Efficient 20 Vartarg for Prairie Dog Adventures
The .20 Vartarg is based on the .221 Fireball case, necked down to .204 and slightly modified for extra capacity. This very efficient cartridge offers low recoil and great accuracy. It’s one of our first choices for ground squirrels and P-dogs out to 300 yards. 20 Vartarg here belongs to Forum Member DogBuster, an avid varminter based in Utah. He posted: “If I recall, I had a hot spot in this location — probably kilt 150+ prairie dogs that morning. The hay wagon helped too, offering added elevation.”
7. Long-barrel SAKO Action Varminter in .243 Super Rock Chucker
Here is another .243 wildcat, chambered for the .243 “Super Rock Chucker”. This long-barreled rig belongs to Forum member MikeGaiz. The rifle features a SAKO action fitted with a 30″ Kreiger barrel chambered for the .243 Super Rock Chucker. From what we have read, the .243 Super Rock Chucker is a .25-06 cartridge necked down to .243 (6mm). Yes this is a barrel burner, but it can definitely “reach out and touch” varmints at VERY long range. Owner Mike reports hits at 1275 yards on prairie dogs in South Dakota. This cartridge drives Sierra 6mm 85gr HPBTs at 3440 FPS. That’s serious speed for an 85-grainer.
8. AR-10 Custom in .243 Winchester
Forum Member Urban Rifleman calls this .243 AR10-platform rifle the “Goblin Killer”. This Gen 2 DPMS rifle features a Craddock Precision Bartlein 1:8″-twist 5R barrel chambered in .243 Winchester with a Tubb assymmetrical muzzle brake. Up front is the unique Tubb Bipod which reduces hop. The buttstock is a Magpul PRS Gen 2. The scope is a Leupold VX-3i LRP 6.5-20x50mm FFP TMR. We’re told this rig “will easily shoot 1/2 MOA, sometimes much smaller”.
Urban Rifleman produces a variety of great gun accessories sold through TheUrbanRiflemanStore.com. That green grip is his Urban Rifleman/Tubb ergonomic grip.
Parting Shot from Groundhog Country, SW Pennsylvania
This nice tripod with rifle mount (and Rem 40XB 22-250 on top) belongs to Forum Member Snert.
Share the post "Sunday GunDay: Eight Great Forum Favorite Varmint Rifles"
“Ever had trouble calling your shots? Everything looked and felt great and you swore it was a 10, but it came up as a wide 9? This may be a result of inconsistent eye placement behind the optic. Here’s an affordable solution to help you stay in the 10 Ring.” — Creedmoor Sports
Here is an interesting new product. This scope accessory attaches to the rear (ocular) lens on a scope. It has a center hole in the middle that can help get you on target faster, and get your eye exactly centered in the scope. That will eliminate certain parallax errors.
This scope accessory was invented by White Oak, which calls it a lens reducer assembly. This features a transparent lens with a chamfer around the center hole which acts as a ghost ring, centering your eye in middle of the optic. The transparent lens allows a full field of view so you can still see surrounding targets and target numbers. The lens is held in place by a Butler Creek lens cap.
White Oak’s unique “ghost ring” design allows a full field of view so you can still see surrounding targets and target numbers but acts as a ghost ring centering your eye in the hole, minimizing effects of parallax and helping you call your shots better.
The Lens Reducer Assembly is currently offered by Creedmoor Sports for these three optics PLUS other scopes which use the same Butler Creek Cover listed after each scope:
Konus XTC-30, $34.95, (Butler Creek #18 lens cover) Weaver K-4, $34.95, (Butler Creek #09A lens cover) Vortex PST 1-4, $34.95, (Butler Creek #14 lens cover)
To Install: Simply press the lens into the lens cap until it is against the shoulder inside the cap. It will be a snug fit, the snug fit ensures the hole is centered. Then install the lens cap on your scope as usual.
NOTE: Some folks may look at this and be concerned that the grayish chamfered ring will obscure vision. Yes and no. The actual “image” that comes through the scope is a very small-diameter circle of light (“exit pupil”) that will fit fully inside the small, unobscured, fully open circle. So if your head is properly centered there will be NO obstruction. However, if you get out of alignment, then, yes, you’ll see the gray chamfered area, just as you’d see the outside of a ghost ring sight.
Share the post "New Lens Reducer Product May Benefit Some Scope Users"
Here’s an stunning highlight reel created by Bullet Theory Films, a Los Angeles-based production company that specializes in capturing action that is too quick for the human eye to see. Using ultra-high-speed cameras, these talented film-makers have captured blindingly fast phenomena — things that happen in micro-seconds. The resulting video imagery can be used for R&D, scientific analysis, product marketing, or (of course) entertainment.
We recommend you watch this video full-screen in High-Definition:
This impressive slo-mo “sizzle reel” features many notable sequences, including:
00:18: .45 ACP leaving m1911 muzzle
00:27: Rifle bullet penetrating barrier with explosive ejecta
00:33: M1A cycling 7.62×51 cartridges
00:38: Pistol bullet disintegrating on steel
00:40: Huge muzzle flame from 12ga shotgun and lead shot on steel
00:45: 5.56 bullet in ballistics gelatin with secondary explosion
01:07: Handgun flame ring from muzzle
01:11: Massive shotgun blast with slug in midair
About the Film-Makers
Bullet Theory Films Co-Founders Matt Novello and Matt Drake first met on the set of History Channel’s highly successful competition reality show TOP SHOT. Throughout five seasons, the show set a benchmark in the art of capturing firearms and live ammunition in action, which has yet to be surpassed.
Utilizing the latest digital high speed technology, Bullet Theory Films offers a full range of production services; from concept development, to the final delivery of your vision. For more information, visit BulletTheoryFilms.com.
Share the post "Super-Slow-Motion Firearms Highlight Reel"
Applied Ballistics Founder Bryan Litz and Former USAMU and Team USA coach Emil Praslick III share their wisdom in an informative Guns Magazine Podcast. Along with being a true ballistics guru, Bryan Litz is an outstanding competitive shooter, having won F-TR National Championships, and both Sling and F-TR divisions at the Berger SW Nationals, along with many other matches. Emil is considered one of the world’s great wind-readers and team coaches, having coached 20+ championship teams.
Guns Magazine podcast host Brent Wheat asks Bryan and Emil about multiple topics including: exterior ballistics, bullet design, wind reading, ballistic solvers, BC myths, and more.
Brent reports: “Together, Bryan and Emil understand what happens from the time a bullet leaves the muzzle until it impacts the target, including the atmospheric affects along the way. Grab a pencil, listen in, and get ready to take notes.”
This Long Range Grad School podcast features Berger’s Chief Ballistician, Bryan Litz, and Berger’s Emil Praslick. Both have extensive long range competitive shooting experience, with championship titles (as shooter and/or coach) in a multitude of long range disciplines. CLICK arrow below to start podcast audio:
Emil Praslick (left) confers with Bryan Litz (right) at King of 2 Miles ELR Event.
In this Video Emil Praslick explains his methods for determining wind direction.
Bryan Litz coaching Team USA in Canada using a WIND PLOT.
Bryan Litz at 2011 World Long Range (Palma) Championships in Brisbane, Australia
Share the post "Long Range Grad School Podcast with Bryan Litz & Emil Praslick"
Yes we miss the good old days… when reloading components were readily available and very affordable. Today, on Gunbroker, a single 1000-count box of primers may sell for well over $300. And some vendors are asking $90 for a single pound of powder that sold for $30 per pound just last year.
We can’t change prices for you, but we can offer a “sentimental journey” back to the “good old days” via a Flashback Thread in our Shooters’ Forum. There, Forum members have posted some items from their collections, with the original prices.
What is the best deal you can remember? How about $1 per pound forty-six years ago — member STS posted: “It was probably 1975 when I bought 100 pounds of H335 from Bruce Hodgdon for $100. It came in cardboard boxes with black trash bags inside. I shot every flake of it at prairie dogs.”
Reloder Powder from Hercules (Now Alliant) for $3.80 per Pound
CCI and Winchester Primers, $16.30 and $13.00 per Thousand
Today some CCI primers are selling for over $300 per thousand on Gunbroker. Member JayHHI6818 said: “Found these the other day in a shoe box in our bedroom closet!”. Nice find Jay!
Hodgdon H4350 for $10.87 per Pound
H4350 remains one of the most popular powders with competitive shooters. It’s ideal for many midsized cartridges, offering great accuracy and temp stability. Today it’s hard to find this powder at ANY price!
Remington 2 1/2 Primers for $1.50 per Hundred
Remington Arms folded. However Remington primers will be produced by Vista Outdoor after the collapse and bankruptcy of Remington Arms. Vista Outdoor, which owns CCI and Federal, will take over the Remington ammunition production facilities.
Share the post "Blast from the Past — Old Prices on Powder and Primers"
New American President Joseph Biden, just three weeks after taking office, called for radical, sweeping gun control measures that could dramatically harm the gun industry and strip away citizens’ rights under the Second Amendment of the U.S. Constitution.
On February 14, 2018, Biden said in a statement that his administration will “not wait for the next mass shooting” but will instead “take action” to “end our epidemic of gun violence.”
According to Guns America Digest: “Biden … wants lawmakers to criminalize private transfers, ban many semi-automatic firearms and accessories in common use, and repeal the Protection of Lawful Commerce in Arms Act, which protects the gun industry from being held liable for the criminal misuse of firearms.”
Biden stated: “Today, I am calling on Congress to enact common-sense gun law reforms, including requiring background checks on all gun sales, banning assault weapons and high-capacity magazines, and eliminating immunity for gun manufacturers who knowingly put weapons of war on our streets”.
President Biden is calling for legislation that would ban Modern Sporting Rifles such as the AR-15, shown here as adapted for High Power competition:
The elimination of the Protection of Lawful Commerce in Arms Act could have disastrous consequences for the general shooting sports industry and firearms makers. This is because it would expose gun-makers to civil lawsuits for injuries caused by criminals using guys. As explained by the NRA-ILA:
About the Protection of Lawful Commerce in Arms Act By NRA-ILA
Joe Biden has unveiled his agenda for his first 100 days in the White House, and his list includes an initiative aimed at nothing less than the destruction of the U.S. firearms industry. This is what would happen if Biden succeeds in his pledge to repeal the Protection of Lawful Commerce in Arms Act.
Imagine if firearm manufactures and sellers – even those who strictly followed the laws enacted to regulate their industry – faced potential civil liability every time a criminal misused a firearm. The affect would be similar to holding automobile makers and dealers responsible for injuries caused by drunk drivers. No business, no matter how conscientious and law-abiding, could ever survive being liable for the acts of millions of random people over whom it had no control.
And that is exactly why the law generally imposes no duty on a person or entity to control the acts of third persons to prevent them from causing harm (unless the person or entity has certain types of relationships with those causing the harm or being harmed).
Yet gun control activists in and outside of government hoped to rewrite that principle when it came to the makers and sellers of firearms. During the 1980s and ’90s, a coordinated series of lawsuits against the gun industry sought to hold these businesses responsible for the criminal acts third parties committed with firearms.
This egregious abuse of the legal system to destroy an industry providing constitutionally protected goods and services sparked a bipartisan response from coast to coast. Thirty-four states passed laws to block these suits in their own courts. Finally, in 2005, Congress followed these examples by enacting the Protection of Lawful Commerce in Arms Act (PLCAA) to provide a floor of protection nationwide.
Share the post "President Biden Demands Congress Pass Anti-Gun Laws"
In the archives of 
Tired of carrying old-fashioned paper Score Books? Well now you can go digital — 
Here is an interesting new product. This scope accessory attaches to the rear (ocular) lens on a scope. It has a center hole in the middle that can help get you on target faster, and get your eye exactly centered in the scope. That will eliminate certain parallax errors.
