HOME PAGE
Shooters' FORUM
Daily BULLETIN
Guns of the Week
Articles Archive
BLOG Archive
Competition Info
Varmint Pages
6BR Info Page
6BR Improved
17 CAL Info Page
20 CAL Info Page
223 Info Page
22BR Info Page
30BR Info Page
6PPC Info Page
6XC Info Page
243 Win Info Page
6.5x47 Info Page
6.5-284 Info Page
7mm Info Page
308 Win Info Page
FREE Targets
Top Gunsmiths
Tools & Gear
Bullet Reviews
Barrels
Custom Actions
Gun Stocks
Scopes & Optics
Vendor List
Reader POLLS
Event Calendar
HELP PAGE
> Contact Us
> ADVERTISING














Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









October 25th, 2024

Smith & Wesson Bodyguard 2.0 Pistol Handgun of Year Award

smith wesson s&w bodyguard 2.0 2 .380 acp pistol handgun

Smith & Wesson has received the Guns & Ammo 2024 Handgun of the Year Award for the Bodyguard 2.0 pistol. This .380 ACP ultra-compact, single-stack pistol has a $449.00 MSRP and can be purchased for $399.00 with both 10-rd and 12-rd magazines.

The Bodyguard 2.0 has received positive reviews because it has excellent ergonomics, is very easy to carry, and has a good trigger. Guns & Ammo notes: “After a thorough evaluation of accuracy, dependability, and durability, the Smith & Wesson Bodyguard 2.0 was a [single] vote short of a unanimous decision. Available with and without a thumb safety, its dimensions, ergonomics, low felt recoil, texture, and functional slide design make the Bodyguard 2.0 the most shootable new pistol for the broadest range of shooters.”

Looking at the reviews, most testers praised the new Bodyguard 2.0 for its modest recoil, good trigger, and good ergonomics. Described as a “micro-compact”, the Bodyguard 2.0 is indeed very small. As you can see in the image below, the Bodyguard 2.0 is about the size of a man’s hand with fingers extended. This photo is from a very comprehensive Ammoland.com test review by Mike Hardesty. If you are thinking of getting this pistol, definitely read that 9/10/24 Hardesty Review.

smith wesson s&w bodyguard 2.0 2 .380 acp pistol handgun

S&W explains: “The Bodyguard 2.0 leverages superior ergonomics, and an enhanced trigger to elevate performance. We’ve been able to accomplish this while still keeping the handgun small enough for deep concealment. We have meticulously engineered every component to enhance ergonomics while preserving performance in a lightweight profile, making it ideal for everyday carry.” — Kyle Tengwall, VP of Marketing.

Hickok45 Test of New S&W Bodyguard 2.0 .380 ACP

S&W Product Description:

SUPERIOR ERGONOMICS
The Bodyguard 2.0 perfectly bridges the ability to comfortably carry but maintain a high level of performance when it comes to shooting. Our ergonomic grip feels great in the hand, the stippling allows the shooter to maintain control and mitigate recoil, and the grip angle lends for a natural point of aim when coming up on target.

AGGRESSIVE SLIDE DESIGN
More serrations give the user multiple points of traction letting them grab and rack effectively in high-stress scenarios.

IMPROVED TRIGGER
Migrating to a striker-fired system and having the flat-face design makes the trigger on the Bodyguard 2.0 light and crisp. Consistent feedback allows for repeatable shots and the flat design aids in finger placement leading to more accurate shooting.

Ace shooter Julie Golob reviews the Bodyguard 2.0 pistol on her JulieGolob.com website. She tests the gun and provides size comparisons with other “micro-compact” pistols. Julie notes that: “The Bodyguard 2.0 has an overall height of 4 inches, a width just under 1 inch, and weighs in at 9.8 oz. unloaded.”

Share the post "Smith & Wesson Bodyguard 2.0 Pistol Handgun of Year Award"

Permalink - Videos, Gear Review, Handguns, News No Comments »
October 25th, 2024

How to Adjust Scope Point of Impact with Burris Signature Rings

Burris signature rings inserts

Burris Signature Rings with polymer inserts are an excellent product. The inserts allow you to clamp your scope securely without ring marks. Moreover, using the matched offset inserts you can “pre-load” your scope to add additional elevation. This helps keep the scope centered in its elevation range while shooting at long range. Additionally, with a -20 insert set in the front and a +20 insert set in the rear, you may be able to zero at very long ranges without using an angled scope base — and that can save money. (To move your point of impact upwards, you lower the front of the scope relative to the bore axis, while raising the rear of the scope.)

Burris Signature Rings

Insert Elevation Values and Ring Spacing
People are sometimes confused when they employ the Burris inserts. The inset numbers (-10, +10, -20, +20 etc.) refer to hundredths of inch shim values, rather than to MOA. And you need the correct, matched top/bottom pair of inserts to give you the marked thousandth value. Importantly, the actual amount of elevation you get with Burris inserts will depend BOTH on the insert value AND the spacing between ring centers.

Forum member Gunamonth has explained this in our Shooters’ Forum:

Working with Burris Signature Rings
Burris inserts are [marked] in thousandths of an inch, not MOA. To know how many MOA you gain you also need to know the ring spacing. For example, with a -20 thou insert set in the front and a +20 thou insert set in the rear, if the ring spacing is 6″, the elevation change will be approximately +24 MOA upwards.

Here’s how we calculate that. If you have a 2 X 0.020″ “lift” over a distance of 6 inches (i.e. 0.040″ total offset at 0.5 feet) that’s equivalent to 0.080″ “lift” over 12 inches (one foot). There are 300 feet in 100 yards so we multiply 0.080″ X 300 and get 24″ for the total elevation increase at 100 yard. (Note: One inch at 100 yards isn’t exactly a MOA but it’s fairly close.)

Here’s a formula, with all units in inches:

Total Ring Offset
——————– X 3600 = Change @ 100 yards
Ring Spacing

(.020 + .020)
—————– X 3600 = 24 inches at 100 yards
Ring Spacing: 6 inches

NOTE: Using the above formula, the only time the marked insert offset will equal the actual MOA shift is when the center to center ring spacing is 3.60″. Of course, you are not required to use 3.60″ spacing, but if you have a different spacing your elevation “lift” will be more or less than the values on the inserts.

Burris Signature Ring elevation windage change spacing insert

Share the post "How to Adjust Scope Point of Impact with Burris Signature Rings"

Permalink Gear Review, Optics, Tech Tip No Comments »