If you’re looking for a handsome new handgun, consider Ruger’s eye-catching, engraved 1911-type pistols, marketed as the SR1911 “Street Edition” series. This series of five engraved models of the SR1911 pistol celebrates Ruger’s rich manufacturing heritage.
These lightweight Commander-style pistols are chambered for the .45 Auto (.45 ACP) and feature a 4.25″ stainless steel barrel. The stainless steel slide is engraved in fine detail and also includes the Ruger logo. These pistols feature an aluminum frame and titanium firing pin. Drift adjustable, Novak 3-Dot sights allow for quick and easy target acquisition.
The first of the “Street Edition” series (shown above) was introduced in October 2024 and commemorated Ruger’s 75th anniversary. The next four “Street Edition” SR1911s have common design elements that connect the series. Each pistol represents its own Ruger facility – “1 Lacey Place” in Southport, CT; “411 Sunapee St.” in Newport, NH; “271 Cardwell Rd.” in Mayodan, NC; and “200 Ruger Rd.” in Prescott, AZ. Each one of the series will feature a unique grip color, and the facility street name will be engraved on the top of the slide. Production will be limited to 500 of each model.
CLICK HERE for more information on the SR1911 pistols on the official Ruger website. For more photos check out a detailed SR1911 feature on the NRAwomen.com website.
We like these new pistols and hope to test one soon. Price varies for each release but the initial SR1911 “Street Edition” is listed for $1397.00 on Gunbroker and $1655.99 at MidwayUSA, so price varies considerably. MSRP was $1899.00 for the first edition.
Ruger SR1911 “Street Edition” series features:
— Traditional 1911 design with finely engraved stainless steel slide.
— Skeletonized hammer and titanium firing pin for faster lock time.
— Lightweight aluminum frame and polished titanium feed ramp.
— Oversized ejection port and extended magazine release.
— Aluminum, skeletonized trigger with crisp trigger pull.
— Replaceable grip panels and checkered backstrap.
— Novak 3-Dot Drift Adjustable Sights.
— Loaded Chamber Indicator.
Includes: Two 7-round stainless steel magazines; bushing wrench.
NSSF Praises New Federal Legislation Protecting Hunters and Anglers
NSSF, the Firearm Industry Trade Association, praises U.S. Sen. Steve Daines’ (R-Montana) introduction of new U.S. Senate bill S. 537, the Protecting Access for Hunters and Anglers Act. This federal legislation would prohibit the U.S. Fish & Wildlife Service (USFWS), Bureau of Land Management (BLM) and U.S. Forest Service (USFS) from banning the use of traditional lead ammunition and tackle absent approval by the applicable state fish and wildlife department and proof that lead ammunition and tackle is primarily causing a wildlife population decline. Similar legislation was introduced in the U.S. House of Representatives by U.S. Rep. Rob Wittman (R-Virginia) as H.R. 556.
“This legislation is tremendously important to protect the primary funding for wildlife conservation in America,” said Lawrence G. Keane, NSSF Sr. V.P. and General Counsel. “Firearm and ammunition manufacturers have paid over $29 billion, when adjusted for inflation, since 1937 and that has been the leading funding source of wildlife and habitat conservation in America. Efforts by bureaucrats to limit or eliminate the use of traditional lead ammunition and fishing tackle without scientific evidence puts those conservation funds at serious risk by increasing costs and creating barriers to participation in outdoor recreation.”
NSSF denounced the USFWS Final Rule it published in 2023 that offered sportsmen and women a “bait-and-switch” deal to open hunting and fishing opportunities on eight National Wildlife Refuges (NWRs), but banned the use of traditional lead ammunition and fishing tackle. The Final Rule offered no scientific evidence of detrimental population impacts to support banning the use of traditional ammunition, despite promises by the Biden administration to “follow the science.”
Firearm and ammunition manufacturers pay a 10 and 11 percent excise tax to the Wildlife Restoration Trust Fund, commonly called the “Pittman-Robertson excise tax”.” The firearm and ammunition industry was directly responsible for $886.5 million Pittman-Robertson taxes of the $1.3 billion apportioned to the states through the USFWS for state conservation and education programs in 2024 alone. As adjusted for inflation, the firearm and ammunition industry has paid over $29 billion into the fund since its inception in 1937.
Photo courtesy Rocky Mountain Elk Foundation (RMEF).
Are you a do-it-yourself kind of guy with a creative eye? Then you’ll love the FREE Target Generator from the folks at ShooterShed.com. This FREE, interactive webpage allows you to design a variety of fun targets, including grids, benchrest-type Score/Group Shooting targets, sight-in targets, and even playing card targets. Choose the paper size and orientation (vertical or horizontal), then select the number of target elements on the page. For example, you could have four (4) bulls or a dozen playing cards. Then click the Style TAB to choose your target style. Use the OPTIONS TAB to overlay a grid on the target, choose squares or diamonds, or include load information blocks. For bullseye targets, you can control the number, color, and spacing (diameter) of the rings. LINK to TARGET GENERATOR.
QWIK TIP: For Super-Quick Target Creation, click the “Target Style” tab, then select a design from the list on the left. Then go to OPTIONS.
Click the TARGET STYLE TAB to select one of many target styles, including NBRSA Benchrest targets and 20+ types of NRA bullseye targets, scaled to distance:
Benchrest
Bullseye
Shapes
NRA High Power
NRA Pistol
NRA Rimfire
Images
Playing Cards
Load Test Blocks
Creating new targets is fast and easy. No computer graphics skills required! We created this green diamonds grid target in just five minutes using the ShooterShed Target Generator:
And here is a handy target with short-range range Benchrest competition-style box/circle aiming points, along with fields for entry of gun/load data:
The program provides a preview of each target you generate. There are controls to choose border and fill colors. If you like a particular design, save the file, and then print as many targets as you want. Check it out, this program is fun and handy to use. Here are four (4) targets your Editor created just for this article. With a bit of practice, you can be generating your own custom targets in minutes.
About the Creator of the Target Generator
The Target Generator program was created by Rod Brown of Sheridan, Wyoming. Rod tells us: “I build custom rifles… I’ve got a 100-yard range out my back door. I shoot short- and long-range benchrest competitively around the country. I’m a full-time software development consultant and an FFL holder. When I’m not developing custom software for my clients, I’m usually fiddling in the shop, building a custom benchrest rifle, traveling to a match, chambering a barrel, or reloading some ammunition.”
Story tip from Boyd Allen. We welcome reader submissions.
We’ve always liked the capacious, durable range boxes from MTM Case-Gard. And MTM offers a special “Tactical” version for AR shooters. This detachable-lid Tactical Range Box features a magwell-filling “action block insert” to support your AR securely during cleaning. Magwell posts like this have been used for years by AR gunsmiths. It’s a fast and convenient way to secure your AR.
The Tactical Range Box also comes with two adjustable cradles that will support most conventional bolt-action rifles and lever guns. These plastic cradles are gentle on fancy stocks, and they can be removed and stowed in the bottom of the box during transport.
The Tactical Range Box uses a two-piece design. The removable top storage compartment holds oils, solvents, brushes, patches, and small accessories. Unlatch the top box to reveal a large, deep storage area that will hold tools, earmuffs, ammo boxes and other larger items. MTM Range Boxes are big enough to hold pretty much everything you need at the range, except your front rest and rear sandbag. Midsouth Shooters Supply offers the MTM Tactical Range Box (item 008-TRB40) for just $50.71. Like MTM’s standard Shooting Range Box (RBMC-11), the Tactical Range Box is well-built and much less flexy than generic plastic tool-boxes. Check out the features of this range box in the video below.
Practical USER TIP — Keep some heavy items in the box for more stability. Forum member Tom Alvez explains: “I have one of those range boxes… It’s a great product, really. But, unless there is some pretty heavy stuff in the box when the rifle cleaning starts it may get pretty skittery. Maybe [add] a block or two of lead — that could come in handy later.”
For more info, contact MTM® Molded Products at (937) 890-7461 or visit MTMCase-gard.com.
The 2025 Southwest Nationals kicked off yesterday at the Ben Avery Range outside Phoenix. The individual 600-yard match was held for F-Open, F-TR, and Sling shooters. There was a good turn-out, particularly in the F-Open class. Shooting was impressive, with 11 F-Open competitors recording 600 points over the course of three 20-rd sessions — not dropping a single point all day. F-Open Ace Peter Johns was the top finisher, with 600-47X.
Modern F-TR rifle looking down-range at Ben Avery Shooting Facility.
Tracy Hogg took the F-TR division with 598-36X. In the sling division, which had both “A” (Any Sight/Any Rifle*) and “P” (Palma) classes, David Luckman topped the field with a stellar 600-48X score. Robert Gustin (in “A” class) had the next highest score, 600-46X. That’s mighty impressive for a older marksman who competes as a Grand Senior.
Today, February 13th, there will be mid-range Team Competition at 600 yards. Expect this match to go down to the wire, and probably be decided on X-Count. CLICK HERE for a Squadding List of teams with target assignments.
Multi-time National High Power Champion Brandon Green is competing this week at Ben Avery. On his Facebook page, Brandon posted: “If anyone wants to follow along with the 2025 Southwest Nationals here’s the link: DesertSharpshooter.com/2025-southwest-nationals. An incredible amount of talent on the range this week! The individual Long Range Championship event will start this Friday.”
2025 Southwest Nationals F-Open, F-TR, Sling 600-Yard Top 10
F-Open 600 Top Ten
PETER JOHNS 600-47X *MW*
ALAN KULCAK 600-47X
TED WEDELL 600-45X
SHILOH PLUE 600-44X HiJr
PAT WOOD 600-42X HiSr
DAVID ROLLAFSON 600-42X
DAN BRAMLEY 600-40X
NORMAN HARROLD 600-37X
TIM VAUGHT 600-35X
AMOS WISHERD 600-34X
F-TR 600 Top Ten
TRACY HOGG 598-38X *MW*
ERIC BISSON 596-37X
BRAD SAUVE 596-35X HiSr
KEITH TRAPP 595-36X
RANDY LITTLETON 595-34X HiGS
ALAN BARNHART 595-33X
JEREMY NEWELL 595-31X
JOSH SIEPERT 594-30X
CARLTON BRAY 594-27X
SCOTT KYLE T 594-25X
SLING 600 Top Ten
DAVID LUCKMAN P 600-48X *MW*
ROBERT GUSTIN A 600-46X HiGS
CURTIS GORDON P 600-34X HiSr
TRUDIE FAY P 599-44X HiWo
BRANDON GREEN P 599-41X
OLIVER MILANOVIC P 599-37X
MICHAEL STORER P 599-36X
MATTHEW BUTTON P 599-32X
PARAG PATAL P 598-42X
KIMBERLY ROWE A 597-45X
The shooting by the top F-Open shooters was mighty impressive. The top 11 finishers all had 600 scores, not dropping a point. And the next dozen shooters finished with 599 scores, just one point back. Among the 599ers, Brandon Zwahr had a 599-47X, matching the X-count of F-Open 600-yard winner Peter Johns.
Stunning F-Open rifle with SEB Mini front rest with Blake Machine accessories.
Top competitors show focus and concentration in SWN mid-range match 2022.
Bird’s Eye Ben Avery — A Look at the Range
If you’ve never visited the Ben Avery Facility north of Phoenix, Arizona, here’s a video that shows the 1000-yard range (including drone footage). The desert range at Ben Avery is something special — check out this “birds-eye view”. This 2016 video also includes an interview with Derek Rodgers, F-TR World Champion, King of 2 Miles, and the only man who who has earned both F-Open AND F-TR USA National titles.
Sling Shooters in Palma Division
For the Palma division, the cartridge of choice is the .308 Winchester (7.62.x51). This versatile cartridge is still capable of extreme accuracy. Never underestimate a skilled sling shooter with a good Palma rifle. Below is multi-time NRA National Long-Range Champion John Whidden in action at Ben Avery a few seasons back. John’s rifle featured a centerfire action in an aluminum Anschutz small-bore stock.
* Brandon Green explains: “The ‘A’ is for Any rifle/Any sight (so basically unlimited up to .338 with either iron sights or optics). And ‘P’ is Palma division”, which is limited to iron sights rifles with .223 Rem (5.56) or .308 Winchester (7.62×51) chamberings.
Photo courtesy NRA MuseumClick Photo to View Larger Image
With today’s polymer-framed Glocks and Kel-Tecs, aesthetics have been sacrificed on the altar of functionality. Not so in the early 20th century — in that period, the best firearm designers created guns that looked as good as they worked. One example is the classic Colt Woodsman. This design came from the legendary John Moses Browning and was later refined by Colt before the pistol’s introduction in 1915. The Colt Woodsman’s frame design evolved over time in three distinct series: Series One 1915–1947, Series Two 1947–1955, and Series Three 1955–1977. Shown above is a stunning Carbonia-blued and engraved Third Series model with ivory grips.
Engraved Colt Woodsman from NRA Museum
In the NRA Museum’s Robert E. Petersen Gallery are many fine engraved arms. This Colt Woodsman .22 pistol is one of the Third Series guns that were made until 1977. Heavy barrels in either 4.5 or 6 inch lengths were offered in this variation. The Museum’s staff says: “We think the poised golden rattlesnake near the serial number is the [best] embellishment without putting down in any way the ivory grip panels or gold outline inlays.”
You can see this lovely Colt and countless other fine firearms at the NRA Museum in Fairfax, Virginia. The Museum is open every day from 9:30 am to 5:00 pm, and admission is free.
The Colt Woodsman was made in many variations, with different barrel lengths and contours and finishes. Here is a Colt Woodsman Third Series Match Target with 6″ Blued frame and slab barrel. Photo from Sam Lisker’s ColtAutos.com.
Here is a Colt Woodsman First Series Match Target with 6.5″ undercut slab match barrel and basic blued finish. Photo from Heritage Auctions.
Here is a Colt Woodsman Bullseye Match Target Pistol (6.5″ barrel) with blued finish and early factory “elephant ear” stocks with Colt medallions. This was owned by Philip Judd, an avid marksman who was 1952 Camp Perry Champion in the 500-yard .30-06 rifle competition. Photo from Sam Lisker’s ColtAutos.com.
This was one of our 25 Most Popular Articles in 2017. We’re repeating it for those of you who may have missed it the first time around. These diagrams were created by the South Texas Shooting Marksmanship Training Center (STMTC).
There was an excellent article about Mirage created for the South Texas Marksmanship Training Center (STMTC). This article explains what causes mirage and how mirage can move the perceived aiming point on your target. Most importantly, the article explains, in considerable detail, how you can “read” mirage to discern wind speeds and wind directions.
Mirage Is Your Friend
While hot days with lots of mirage can be frustrating, mirage can reveal how the wind is flowing (and changing). If you learn how to recognize and read mirage patterns, you can use that information to shoot higher scores. That’s why many leading long-range shooters tell us: “Mirage is your friend.” As the STMTC article explained: “A mirage condition is not a handicap, since it offers a very accurate method of perceiving small wind changes[.]”
Mirage Illustrated with Diagrams
With simple but effective graphic illustrations, this is one of the best explanations of mirage (and mirage reading) we have found on the internet. This is a “must-read” for any serious competitive shooter. Here is a brief sample from the article, along with an illustration. NOTE: the full article is six times longer and has 8 diagrams.
The term “mirage” as used by the shooter does not refer to a true mirage, but to heat waves and the refraction of light as it is bent passing through air layers of different density. Light which passes obliquely from one wind medium to another it undergoes an abrupt change in direction, whenever its velocity in the second medium is different from the velocity in the first wind medium; the shooter will see a “mirage”.
The density of air, and therefore its refraction, varies with its temperature. A condition of cool air overlaying warm air next to the ground is the cause of heat waves or “mirage”. The warm air, having a lower index of refraction, is mixed with the cooler air above by convection, irregularly bending the light transmitting the target image to the shooter’s eye. Figure 1 shows (greatly exaggerated) the vertical displacement of the target image by heat waves.
Heat waves are easily seen with the unaided eye on a hot, bright day and can be seen with spotting scope on all but the coldest days. To observe heat waves, the scope should be focused on a point about midway to the target. This will cause the target to appear slightly out of focus, but since the high power rifle shooter generally does not try to spot bullet holes, the lack in target clarity is more than compensated by clarity of the heat waves.
Story tip from Boyd Allen. We welcome reader submissions.
NRL Hunter is a popular series of competitions for all levels of hunters — both newcomers and experts. Matches that showcase hunting skills are hosted through the country with multi-distance, walk-around shooting courses similar to PRS/NRL, but limitations on weight and equipment cost make this more affordable and practical. These events provide a competitive format for new and seasoned hunters to learn about skills, gear, and local hunting terrains. To participate in matches, hunters must purchase a $100 Annual NRLH membership ($75.00 for Young Guns). For more information, visit NRLHunter.org.
In this video top NRL Hunter Pro division competitor Jon Pynch shows the gear he uses to win. He talks about gear used for spotting and ranging targets, building positions, and making shots. Jon also gives his tips on how to cope with broken down equipment and bad weather. Check out the video and try an NRL Hunter match in your state.
Here are upcoming NRL Hunter events slated for the next 8 weeks. CLICK HERE to visit the full NRL Hunter Match Calendar showing all 31 events scheduled in 2025. Registration is still available for most of these matches. You’ll need to become an NRL Hunter Member and then pay match fees which are typically $250-$275 Individual, $500-$550 Team, and $150-$185 Skills.
This is only partial listing. CLICK HERE for all 28 NRL Hunter 2025 events.
Here is the most recent NRL Hunter Podcast, released 1/29/2025. In this episode William Righter, Mike Lilly, Sarah Beard, and Nick Mowrer join Travis Ishida at the 2025 NRL Hunter PRO-AM held in Arizona last month. They review how NRL Hunter competitions run, and how to get the best results. CLICK HERE to visit the NRL Hunter Podcast page with dozens of other informative podcasts, all accessible at no cost to you.
In the ELR game, particularly the King of 2 Miles (KO2M), it’s “go big or go home”. The top shooters run large-capacity cartridges that push large-caliber, ultra-high BC bullets at very high velocities. Bullets launched by cartridges such as the .416 Barrett can sustain supersonic velocities at Extreme Long Ranges — and that’s what it takes to win. The .416 Barrett can launch a 550-grain solid bullet at 3000+ FPS.
Photo from ELR Competitor Corbin Shell.
2018 and 2019 Kings of 2 Miles Loaded on RCBS Presses
So how do you load jumbo cartridges such as the .416 Barrett? It takes a big, heavy, super-strong reloading press. We’ve learned that two recent King of 2 Miles champions, Paul Phillips (2019) and Robert Brantley (2018) both loaded their KO2M ammo on RCBS AmmoMaster .50 BMG presses. Phillips loaded .416 Barrett ammo, while Brantley loaded a similar .416 MCS cartridge.
In 2018, Robert Brantley topped the field using his custom .416 MCS cartridge. Then in 2019, Paul Phillips won the K02M competition shooting a .416 Barrett, with Brantley a close second. Both Phillips and Brantley use the RCBS AmmoMaster .50 BMG single stage press kit and RCBS .416 Barrett dies to hand-load for extreme long-range. “My ammo has been much more consistent after switching to the RCBS press and dies,” remarked Phillips, who runs the Global Precision Group. Brantley said he uses RCBS products for most of his reloading needs — from the dies and AmmoMaster, to the ChargeMaster and Brass Boss. His custom .416 MCS loads launch a 550-grain bullet more than 3,100 fps.
Loading with RCBS AmmoMaster .50 BMG Press
This video shows reloading with the RCBS AmmoMaster .50 BMG press. While this video shows .50 BMG cases being loaded, the principles are the same for loading the .416 Barrett cartridge or other big rounds. Big cases need big presses!
Spring is coming soon, and that means more time outdoors. Do you have a good first-aid kit in your vehicle to deal with possible injuries to family members of all ages? For just $17.00 on Amazon you can get an excellent kit from Be Smart/TRI, the #1 maker of First Aid Kits in the USA. Don’t delay, we expect this sale price to go up soon.
TRI’s Be Smart Get Prepared First Aid Kit has 201 items inside a sturdy case with shoulder strap and carry handle. There is also a handy, detachable mini pouch with key essentials for first aid on-the-go. You can easily bring the mini-pouch along on a bike ride or hike.
This multi-purpose First Aid Kit includes:
• 50 – Bandages 3/4 x 3
• 30 – Bandages 3/8 x 1 1/2
• 6 – Bandages Closure
• 3 – Knuckle Bandages
• 1 – Tapes – .5 x 2.5yd Waterproof
• 10 – Cotton Tips – 2.75″”/10 Pack
• 4 – Finger Splints
• 1 – First Aid Guide
• 4 – Gauze Pad – 2 x 2 / 4 ply
• 4 – Gauze Pad – 4 x 4 / 4 ply
• 1 – Gauze Pad – 5 x 9
• 2 – Nitrile Gloves
• 1 – Instant Cold Pack – 5 x 6
To help ensure that outdoor adventures remain safe and trouble-free, the CTD Shooters’ Log has a helpful Essential Summer Survival Guide. This is worth reading before you venture away from civilization.
Here are some highlights of the article with links for MORE INFO:
First Aid Kits for Campers
You should never venture outside without a first aid kit close at hand. While exploring the outdoors, all types of accidents can occur—from cuts, scrapes, and burns to broken limbs and severe allergic reactions.
Basic Survival Skills
Basic survival skills are a necessity if you plan to spend any amount of time outdoors. These five tips, plus a how-to on what to pack in a lightweight, basic survival kit will help if you are ever stuck, lost, stranded or injured in the field.
How to Treat Burns
Fireworks, barbeques and campfires — in the summer we are frequently around fire, which increases our chance of getting burned. A first-degree burn is most likely home treatable, while a third degree burn requires immediate medical attention. Learn how to spot the differences between minor and severe burns.
“This legislation is tremendously important to protect the primary funding for wildlife conservation in America,” said Lawrence G. Keane, NSSF Sr. V.P. and General Counsel. “Firearm and ammunition manufacturers have paid over $29 billion, when adjusted for inflation, since 1937 and that has been the leading funding source of wildlife and habitat conservation in America. Efforts by bureaucrats to limit or eliminate the use of traditional lead ammunition and fishing tackle without scientific evidence puts those conservation funds at serious risk by increasing costs and creating barriers to participation in outdoor recreation.”
We’ve always liked the capacious, durable range boxes from 
Engraved Colt Woodsman from NRA Museum
