Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









November 19th, 2026

Indoor Range Shooting — Tips for Proper Range Procedures

Safety Video NSSF Indoor Range Etiquette

Shooting indoors is fun, and at many indoor ranges you can shoot in the evening after work. But when shooting indoors you should always be extra careful. Follow all key gun safety practices and adhere to proper range “Etiquette”. We also recommend double hearing protection — plugs under muffs.

The NSSF (NSSF) offers a useful Range Safety and Etiquette video. This 8.5-minute video explains safe practices, especially at indoor ranges. In the video, the moderator list the basic rules of gun safety, before covering key range etiquette topics such as range officer commands, how to uncase your firearm on the range when you first arrive, and what to do if a firearm is accidentally dropped. There are also safety tips specific to handling both semi-automatic handguns and revolvers.

Safety Video NSSF Indoor Range Etiquette

BAD RANGE BEHAVIOR — Five Things NOT to Do at the Range

Here are the five worst behaviors we’ve seen at indoor ranges. These behaviors are both dangerous and inconsiderate. Any one of these behaviors can get you permanently banned from an indoor range.

1. Sweeping other individuals after loading a weapon behind the firing line is very bad. All your weapons should be empty until you reach your shooting station.

2. Turning the handgun sideways while trying to clear a malfunction or insert/remove a magazine. This will point the muzzle at a fellow shooter. Or, after shooting a gun, the shooter fails to clear the weapon and then places the gun somewhere near the shooting station with the muzzle in an unsafe position.

3. Reacting unpredictably when firing a high recoil handgun. We’ve seen people take a second shot by accident with the muzzle way off target.

4. Not obeying range commands — in particular continuing to shoot during called cease-fires.

5. Poorly aimed shooting that hits target frames or carriers, causing ricochets.

Seven Types of People at the Gun Range — HUMOR

This video is satire, but with lots of truth in the characterizations. Laughter guaranteed.

Double-Up on Hearing Protection When Shooting Indoors

Howard Leight Impact Pro Electronic Muffs NRR 30

When shooting rifles and pistols indoors we recommend quality muffs with earplugs underneath, offering double protection. When inside an enclosed range, with other shooters blasting away right next to you, you really need effective hearing protection. But you also need to hear range commands and be able to communicate with your fellow shooters. That’s why we recommend electronic muffs with plugs underneath.

Howard Leight Impact Pro Electronic Muffs NRR 30

Permalink - Articles, - Videos, Handguns, Shooting Skills No Comments »
November 19th, 2026

Bullet RPM and Drag — How BC Changes with Bullet Spin Rates

Bryan Litz bullet rpm BC Drag ballistics coefficient twist rate

You may not realize it… but to get the optimum BC from your bullets (i.e. the lowest aerodynamic drag), you must spin the bullets fast enough. Bullet drag increases (as expressed by lower BC) if the bullet spins too slowly. Bryan Litz of Applied Ballistics explains how BC changes with twist rates…

More Spin, Less Drag
In this article, we look at how twist rate and stability affect the Ballistic Coefficient (BC) of a bullet. Again, this topic is covered in detail in the Modern Advancements book. Through our testing, we’ve learned that adequate spin-stabilization is important to achieving the best BC (and lowest drag). In other words, if you don’t spin your bullets fast enough (with sufficient twist rate), the BC of your bullets may be less than optimal. That means, in practical terms, that your bullets drop more quickly and deflect more in the wind (other factors being equal). Spin your bullets faster, and you can optimize your BC for best performance.

Any test that’s designed to study BC effects has to be carefully controlled in the sense that the variables are isolated. To this end, barrels were ordered from a single barrel smith, chambered and headspaced to the same rifle, with the only difference being the twist rate of the barrels. In this test, 3 pairs of barrels were used. In .224 caliber, 1:9” and 1:7” twist. In .243 caliber it was 1:10” and 1:8”, and in .30 caliber it was 1:12” and 1:10”. Other than the twist rates, each pair of barrels was identical in length, contour, and had similar round counts. Here is a barrel rack at the Applied Ballistics Lab:

Applied Ballistics used multiple barrels to study how twist rate affects BC.

stability gyroscopic ballistics coefficient drag twist rate

“The Modern Advancements series is basically a journal of the ongoing R&D efforts of the Applied Ballistics Laboratory. The goal of the series is to share what we’re learning about ballistics so others can benefit.” –Bryan Litz

Barrel twist rate along with velocity, atmospherics, and bullet design all combine to result in a Gyroscopic Stability Factor (SG). It’s the SG that actually correlates to BC. The testing revealed that if you get SG above 1.5, the BC may improve slightly with faster twist (higher SG), but it’s very difficult to see. However, BC drops off very quickly for SGs below 1.5. This can be seen in the figure below from Modern Advancements in Long Range Shooting.

The chart shows that when the Gyroscopic Stability Factor (SG) is above 1.5, BC is mostly constant. But if SG falls below 1.5, BC drops off dramatically.
stability gyroscopic ballistics coefficient drag twist rate

Note that the BC drops by about 3% for every 0.1 that SG falls below 1.5. The data supports a correlation coefficient of 0.87 for this relationship. That means the 3% per 0.1 unit of SG is an accurate trend, but isn’t necessarily exact for every scenario.

It’s a common assumption that if a shooter is seeing great groups and round holes, that he’s seeing the full potential BC of the bullets. These tests did not support that assumption. It’s quite common to shoot very tight groups and have round bullet holes while your BC is compromised by as much as 10% or more. This is probably the most practical and important take-away from this test.

To calculate the SG of your bullets in your rifle, visit the Berger Bullets online stability calculator. This FREE calculator will show you the SG of your bullets, as well as indicate if your BC will be compromised (and by how much) if the SG is below 1.5. With the stated twist rate of your barrel, if your selected bullet shows an SG of 1.5 (or less), the calculator will suggest alternate bullets that will fully stabilize in your rifle. This valuable online resource is based directly on live fire testing. You can use the SG Calculator for free on the web — you don’t need to download software.

(more…)

Permalink Bullets, Brass, Ammo, Reloading, Tech Tip No Comments »
November 19th, 2026

Shooting Industry Jobs Available Now Nationwide — NSSF List

NSSF gun industry jobs employment center openings hire work

Firearms Industry JobsA number of interesting jobs in the firearms industry have become available in recent weeks. The NSSF maintains a regularly-updated listing of employment opportunities with gun-makers and shooting sports organizations. On the NSSF Career Center right now there are executive openings, engineering jobs, tech placements, account manager positions, sales and marketing positions, and digital media opportunities. Here are some of the jobs we found this week posted on the NSSF Website. CLICK HERE to visit the NSSF Career Center with all current listings.

NSSF Jobs employment gun industry hiring

Firearms Industry Jobs — Current Openings

The gun industry needs skilled personnel! The total number of full-time equivalent jobs in the firearms industry rose from approximately 166,000 in 2008 to almost 342,330 in 2020, a 106% increase. Here are some current job openings posted on the NSSF Career Center:


NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring
NSSF Jobs employment gun industry hiring

Permalink - Articles, News No Comments »