Vanguard Modular Chassis Rifle — Half-MOA with Factory Ammo
Weatherby has a new modular rifle for PRS comps and other tactical disciplines. Called the Vanguard® Modular Chassis (VMC), this rifle features a Modular Driven Technologies (MDT) aluminum stock, Luth AR MBA-1 buttstock, and 22″ heavy barrel. The Weatherby Vanguard action is fitted with an adjustable 2-stage trigger. Priced at $1519.00 MSRP, this rifle can be campaigned in the PRS “Production Class”, which limits complete rifles to $2000.00 without optics. The rifle is offered in three chamberings: .223 Rem, 6.5 Creedmoor, and .308 Winchester.
Weatherby says its Vanguard Modular Chassis tactical rifle is very accurate. To back that claim, Weatherby offers a SUB-MOA accuracy guarantee — Weatherby guarantees the rifle will shoot .99” or smaller 3-shot groups at 100 yards when used with Weatherby® factory or premium ammunition.
Near Half-MOA Accuracy with Factory Ammo
It turns out Weatherby’s accuracy claims are conservative. This tactical rifle is closer to a half-MOA rig than a 1-MOA gun. American Rifleman recently tested a .308 Win version of this rifle and recorded really stellar accuracy — close to half-MOA. What’s more, this rifle is not fussy — with a 1:10″-twist barrel it proved very accurate with six different types of factory ammo.
In fact, the rifle delivered near-half-inch 5-shot groups with two types of Hornady factory ammo, and the worst group (of six ammo types) was 0.76″, still very impressive for factory fodder. With good hand-loads this gun could go well under half-MOA (for five shots).
Vanguard Modular Chassis FIVE-SHOT Test Groups with Factory Ammo:
0.53 inches | Hornady 168gr Match BTHP (2718 fps)
0.55 inches | Hornady 155gr Steel Match (2612 fps)
0.57 inches | Black Hills 168gr BTHP (2608 fps)
0.66 inches | Federal Premium 168gr MatchKing BTHP (2659 fps)
0.70 inches | Hornady 155gr American Gunner (2697 fps)
0.76 inches | Black Hills 175gr BTHP (2603 fps)
NOTE: Group sizes are for 5-shot groups shot from bench at 100 yards with Caldwell pedestal rest and rear sandbag. Pentax Lightseeker 6-24x50mm scope. Velocities in FPS from PACT Chronograph.
READ American Rifleman’s FULL REVIEW of Weatherby Vanguard Modular Chassis Rifle
The accuracy testing was done by gunwriter Mike Detty, who notes: “My single best group was fired with Hornady’s Match 168-gr. BTHP ammunition. Five shots measured just slightly more than a half-inch. Hornady’s 155-gr. Steel Match ammo wasn’t far behind with a group of .55″. Also accounting for the small groups is the VMC’s wonderful trigger. It is a two-stage affair and the first stage has about 3/8” take up with about a pound of pressure until it reaches the second stage where another 1 ¾ lbs. was required to break the shot.”
Vanguard Modular Chassis FEATURES:
CNC-machined, hard-anodized, 6061 aluminum chassis
Fully adjustable LUTH-AR MBA-1 buttstock
Hogue Overmolded grip with finger grooves
Adjustable high-quality, Two-stage trigger
Fully Enclosed Bolt Sleeve
Integral Recoil Lug
3-Position Safety
PRS Production Class Cost Limits
Production Division combined rifle and scope MSRP as listed on the company’s website shall not exceed $3,000 USD, the rifle shall not exceed $2,000 USD and the optic not exceed $2,000 USD. [Editor: For example, you could have a $2,000 rifle with a $1000.00 scope or vice-versa. The total system cannot exceed $3000. Rifle alone cannot exceed $2000.00 retail sale price.]
Production Division rifles are not permitted to be altered or improved in any way from the original factory configuration.
Similar Posts:
- Half-MOA with Factory Ammo? Weatherby VMC Comes Close
- Weatherby Offers ‘Range-Certified’ Sub-MOA Varmint Rifle
- Five Blacktical Bolt-Guns from SHOT Show
- Weatherby’s New-for-2012 Rifles Unveiled
- KRG 180-Alpha Tactical Chassis for Savage Actions
Share the post "Vanguard Modular Chassis Rifle — Half-MOA with Factory Ammo"
Tags: American Rifleman, Hornady, Mike Detty, PRS, Tactical Rifle, Vanguard Modular Chassis
A friend bought one in 308 and had less than stellar accuracy. I remember groups of 2-3″ at 100 yards with multiple types of match ammo. I also shot it to make sure it wasn’t the shooter. He sent it back to Weatherby and they replaced his barrel. It took longer than it probably should have, but they didn’t try to get out of honoring their warranty at all. Now it shoots much like reported here – .5-.7″ groups at 100. All this to say Weatherby will stand by their product.