This helpful video from our friend Kirsten Joy Weiss explains how to avoid “scope bite”. This can occur when the scope, on recoil, moves back to contact your forehead, brow, or eye socket area. That’s not fun. While common sense tells us to avoid “scope bite” — sooner or later this happens to most shooters. One viewer noted: “I have come close. I had a Win Model 70 in .375 H & H Mag and I was shooting over a large rock in a strange position. The scope hit my eye glasses hard enough to bend the wire frames and cause a little pain on the bridge of the nose from the nose piece. [That] made a believer out of me.”
Kirsten offers a good basic principle — she suggests that you mount your rifle-scope so that the ocular (eyepiece) of the scope is positioned at least three inches or more from your eyeball when you hold the rifle in your normal shooting position. From a technical standpoint, optical eye relief is a property of the scope, so you want to purchase an optic that offers sufficient optical eye relief (meaning that it allows you to see the full circle of light with your head at least three inches from the eyepiece). Then you need to position the optic optimally for your head/eye position when shooting the rifle — with at least three inches of eyeball-to-scope separation (i.e. physical eye relief).
NOTE: You should mount the scope to provide adequate eyeball-to-scope separation for the actual position(s) you will be shooting most of the time. For an F-TR rig, this will be prone. For a hunting rifle, your most common position could be sitting or standing. Your head position will vary based on the position. You can’t assume the scope placement is correct just because it seems OK when you are testing or zeroing the gun from the bench. When shooting from a prone or kneeling position you may find your eye considerably closer to the eyepiece.
Ultimate Reloader’s Gavin Gear is working on the most comprehensive reloading press comparison video.
UltimateReloader.com is a leading website showcasing reloading hardware and methodologies. Ultimate Reloader’s founder, Gavin Gear, regularly tests the latest and greatest reloading gear, including presses, case prep centers, cleaning systems and more. Gavin, shown above, is currently hard at work on “the mother of all” reloading press comparisons. He has secured 14 single-stage presses and set them up in his workroom/studio. This will be the most comprehensive reloading press video ever created.
Last week, Gavin was working hard in SHOT Show 2019 in Las Vegas, finding new products, and interviewing some important folks in the shooting sports industry. Here are four videos Gavin released this week for his Ultimate Reloader YouTube Channel.
New Products from Ruger for 2019
Gavin says: “I’m a big fan of Ruger rifles, in fact my first rifle was a Ruger 10/22! Since then I’ve published a lot of stories covering the Ruger Precision Rifle, and other Ruger products. While at the SHOT show this year I visited the Ruger booth, and got the scoop on the latest rifle offerings from Ruger.” Below is also an Ultimate Reloader preview video of the Ruger American Rifle in 6.5 Creedmoor and “Go Wild Camo” livery.
Here are some interesting comments from Gavin’s YouTube viewers:
“It’s amazing how low price [Rugers are] while still being made in the USA. Great job Ruger!” — J. Allen
“I own the RPR in 6.5, 5.56 [.223 Rem], .22 rimfire. The rifles are cheap it’s the bi-pods, rings, optics that make you dig deep in the wallet.” — 2d Amendment
“I am really digging the Ruger American Go Wild Camo, what an absolutely beautiful gun[.] I had a friend … with the 22 inch barrel and is hitting solid MOA groups out to 200.” — F. Earnest
New Products from Lyman for 2019
Lyman Products rolled out three impressive new reloading presses last year. This included an 8-station turret press, a beefy O-frame press, and a versatile C-Frame compact press.
Following up on last year’s successful product launches, for 2019 Lyman is releasing some impressive new tools and gear, including a cool new case trimmer and a deluxe shooting mat. In this video, Gavin interviews Lyman engineer Spencer Karoll, who discusses Lyman’s new product offerings.
Interview with Hornady President Steve Hornady
Gavin reports: “One of the great things about going to the SHOT Show is the people you get to talk with. At last year’s SHOT Show, I met Steve Hornady and talked for a few minutes. This year I [wanted] to have a conversation with Steve on camera! Steve was game, so here it is– a discussion about Hornady’s history, Hornady’s business philosophy, and Steve’s thoughts on new products like the 300 PRC.”
.224 Valkyrie Status Report — Info from Federal
Since its debut just before SHOT Show last year, the new .224 Valkyrie cartridge has been a “hot topic” in the gun industry. In this video interview Gavin covers the .224 Valkyrie’s first year. This video reveals key facts, clarifies misconceptions, and explains how Federal Premium has worked with the shooting community to realize the full potential of this cartridge.
We are big fans of the .17 HMR round. It’s just about perfect for ground squirrels, and is effective on prairie dogs out to about 200 yards. The two main .17 HMR producers have been CCI and Hornady. Now we have a new player in the .17 HMR world — Norma — and that’s a good thing. For 2019, Norma® has expanded its rimfire line-up with the introduction of its new .17 HMR V-MAX. A great round for varmint hunters and small game hunters, the Norma .17 HMR V-MAX delivers fine accuracy and hard-hitting performance all the way out to 200 yards.
Norma’s .17 HMR V-MAX is engineered to deliver high energy upon impact combined with good accuracy. With a 2560 FPS muzzle velocity rating, this ammo features a 17gr polymer-tipped V-MAX bullet designed for rapid expansion. MSRP for a 50-round box is $12.78. Expect “street price” under $10.00.
“The .17 HMR has a very loyal following among hunters and target shooters alike,” said Paul Lemke, General Manager for RUAG Ammotec USA. “With outstanding accuracy and excellent energy transfer, Norma’s new .17 HMR V-MAX lives up to the reputation of this … rimfire caliber.”
What rifle would you feed Norma’s new .17 HMR ammo? How about the new .17 HMR version of the Ruger Precision Rimfire Magnum. Here’s an informative video on that new modular bolt-gun, which is also available in .22 WMR. Reviewer 22 Plinkster gets good accuracy at 100 yards shooting 17gr CCI .17 HMR ammo. (The 20gr ammo was much worse).
About Norma — A company from Sweden
Norma is a registered trademark of RUAG Ammotec, a RUAG Group Company. Established in 1902 and based out of Amotfors, Sweden, Norma has built a reputation world-wide for its dedication to quality, precision and reliability For more information, visit Norma-ammunition.com.
In the video below, Forum member (and F-Class ace) Erik Cortina shows how to install a Jewell Benchrest trigger into a Kelbly F-Class Panda action. You could follow the same simple procedure to install a Jewell in a standard Panda action. Kelbly’s sell both standard and long versions of the F-Class Panda action. Both versions feature integral recoil lugs in the front.
To see more detail in this “how-to” video, you can zoom it to full-screen size. Simply click the full-screen icon (4-cornered frame) just to the right of the YouTube logo in the lower right.
Everyone should own a nice .22 LR rimfire pistol. The Browning Buck Mark is a classic, and for good reason. These pistols are reliable, well-balanced, have a good trigger, and they are very accurate. We have nothing but praise for the bull-barreled Buck Marks. And now you can get one for a super-low price. Sportsman’s Guide has the Browning Buck Mark Camper UFX with 5.5″ Barrel on sale for $299.99 ($284.99 member price). But it gets even better — if you use Code “WARRIOR” during check-out, you save $20.00, putting your total price at just $279.99 (or $264.99 for SG members). That’s a great deal on a very solid rimfire pistol that can serve you well for decades.
The accurate and ergonomic Buck Mark Camper UFX was selected as an NRA Gun of the Week last year. This video explains the pistol’s features in detail.
This video shows how to Field Strip and disassemble the Buck Mark Camper UFX. To Field Strip the pistol, you need to remove three screws.
Browning Buck Mark Camper UFX Features:
• Blowback, Single Action Only
• Tapered 5.5″ Bull Barrel
• Alloy receiver w/matte black finish
• Overmolded Ultragrip FX ambidextrous grips
• Pro-Target™ adjustable sights with Fiber Optic
Caliber/Cartridge: .22 LR (22 Long Rifle)
Capacity: 10+1
Safety: Manual
Sights: Fiber Optic
Weight: 2.12 lbs
One of the most interesting new pistols at SHOT Show 2019 was the SIG Sauer P320 XCompact, the latest in the P320 X-Series. What is most noteworthy about this pistol (and other X-Series guns) is that the TRIGGER GROUP, not the frame, carries the serial number. That means that after you process one SIG P320 X handgun through an FFL, you can put that same trigger group in different frames. So you could have a full-sized pistol for slow-fire target work, plus a compact version for concealed carry. Or you can have a 9mm AND a 40 S&W version of the same pistol. SIG calls this “unprecedented modularity”. We agree — this is very, very clever. Glock, Walther, Ruger — take note!
SIG’s P320 XCompact is a modular, striker-fired pistol with a serialized trigger group that makes it adaptable to multiple calibers, size, and grip options. The P320 XCompact is available in 9mm and features X-RAY3 day/night sights, a flat trigger, and night sight rear plate making it optic ready. There are both a striker safety and a disconnect safety. The P320 XCompact comes standard with two, 15-round magazines.
P320 XCompact is Comfortable in the Hand, Like Classic P226/P228 Pistols
At SHOT we tried the P320 XCompact and found it very comfortable in the hand — with ergonomics similar to our much-loved metal-framed P226. SIG says the XCompact has a “completely redesigned grip module with an improved beavertail and fastback profile, contoured magwell, and a deep trigger guard undercut”.
“The P320 XCOMPACT redefines what a compact pistol should be by combining concealability with full size XSERIES features. Through extensive end-user feedback, the P320 XCOMPACT provides for smoother handling and optimizes the user experience,” said Tom Taylor, Chief Marketing Officer and Executive Vice President, Commercial Sales.
There is so much to see at SHOT Show, with nearly 2000 exhibitors showcasing tens of thousands of products. SHOT Show is the largest trade show of its kind in the world, attracting 60,000+ attendees from more than 100 countries.
Thankfully there are many teams of reporters who covered SHOT Show this year, and they’ve now posted a wide selection of video reports. In today’s SHOT Show video showcase, we post our “pick of the litter” — ten of our favorite video reports from SHOT Show 2019, plus one great video “blast from the past”.
Our friend Erik Cortina is at Raton, NM this week at the F-Class Nationals. When he’s not shooting (or working) Erik produces YouTube videos. One of his most popular videos explained why you should full-length size cartridge brass. In no uncertain terms Erik says: “Quit Neck Sizing!!!” Watch the Video:
Why It’s Smart to Full-Length Size Your Brass
Commentary by Erik Cortina
Should You Full-Length Size Your Cartridge Brass?
Absolutely. Let Me Explain Why…
I have seen it time and time again, shooters on the line wrestling with their rifle trying to get the bolt closed while the wind is switching. They were too focused trying to get their bolt to close and getting their rifle settled back on the bags that they missed the wind switch. Bang… Eight! The straw that broke the camel’s back for me was at the 2017 Canadian Nationals. I was paired up with a young girl and she would try really hard to close the bolt on her rifle. The majority of the time she would get it to close, but often times she could not even get the round to chamber. She was focused on her rifle the entire time rather than on the conditions. When we completed our strings, she had five rounds that did not chamber our of 15! That is way too many!. I told her she needed to think about Full-length sizing with 0.002″ shoulder bump, or Controlled Full-length Sizing like I call it. I told her not to worry about losing accuracy. I told her that I full-length size all my rounds and asked if she noticed how smooth my bolt was and noticed my score. She said yes, they were both great!
Controlled Full-length Sizing Does NOT Harm Accuracy
I have found that Controlled Full-length Sizing does NOT hurt accuracy or shorten brass life. I find that I can focus much more on the conditions when I don’t have to think about chambering a round nor extracting it. It has become second nature. After firing, I keep my head welded to the stock, I open the bolt by placing my thumb on top of stock and rotating hand upwards. I reach in and retrieve spent case, place it back in ammo box, and pick up another loaded round and put in chamber. I verify conditions and when ready, I push the bolt in and close it with my index and middle finger.
With Controlled Full-length Sizing you “bump” the shoulder around .002″ for bolt guns.* Image courtesy Sinclair International which carries a variety of Full-length dies.
Whidden Full-Length Sizing Dies by AccurateShooter.com Editor
For proper Full-length sizing, you want a quality die that’s a very good match to your chamber. For our project rifles we usually turn to Whidden Gunworks which offers both bushing and non-bushing FL dies. And if you want the hot new option, check out Whidden’s patent-pending, click-adjustable FL-sizing die. This gives instant, precise control over shoulder bump. It works great.
*With gas guns, such as the AR10, you may want to increase shoulder bump to .003″ or more. With some benchrest cartridges, .0015″ bump may prove optimal. But .002″ is a good starting point.
In this video, Forum member Erik Cortina shows how to create a custom modified case for use with the Hornady Lock-N-Load Overall Length Gauge (formerly the Stoney Point Tool). While Hornady sells modified cases for many standard cartridges, if you shoot a wildcat such as the 6mm Dasher or .284 Shehane, you’ll need to create a custom modified case*. And even if you shoot a standard cartridge such as the .308 Winchester you can get more consistent measurements if you make a custom modified case from a piece of brass fired in your chamber.
The process is straight-forward. Take a piece of brass fired in your chamber and full-length size it (with about .002″ shoulder bump). Then you need to drill out the primer pocket. Erik uses a mini-lathe for the operation, but this general process can be done with a drill press or other tools. Erik shows how to do this with a 0.290″ HSS (High Speed Steel) drill bit on a mini-lathe. After drilling the hole comes the tricky part — you need to tap the case with the precise 5/16″ x 36 threads per inch (tpi) right-hand thread that matches the male thread on the O.A.L. Gauge. This 5/16″ x 36 tpi tap is pretty uncommon, but you can order it from Amazon.com if you can’t source it locally.
If you use a mini-lathe, Erik suggests loosening the tailstock slightly, so it can float while cutting the threads. Erik also says: “Make sure you get the tap on pretty tight — it’s going to want to spin.” Erik turns the case at about 100 rpm when tapping the threads. Once the case and tap are rigged, the actual tapping process (see video at 6:00) takes only a few seconds. While the mini-lathe makes the tapping process go more quickly, the threading can also be done with other systems.
TIP: Don’t just make one modified case, make three. That gives you one for your range kit, one for your home reloading bench, plus a spare (since you WILL eventually lose or misplace one).
Here’s the Stuff You Need
5/16″-36 TPI Threading Tap
The required thread is somewhat uncommon. You need a 5/16″ – 36 tpi Right Hand Thread Tap. If you can’t find it locally, Amazon.com carries the correct tap. Erik notes: “The 5/16-36 tpi tap is not a common size. I think Hornady did this on purpose to make it more difficult for the average guy to make his own modified cases.”
0.290″ Drill Bit
Erik uses an 0.290″ HSS “L” drill bit. (This “L” Letter Gauge code designates a 0.290″ diameter bit). A close metric equivalent would be 7.3 mm (0.286″). Erik says: “A 9/32″ drill will also work but it will be harder to run the tap in since the hole will be .281″ instead of .290″ with the Letter Gauge L bit.”
Tips for Using O.A.L. Gauge with Modified Case
We’ve noticed that many folks have trouble getting reliable, consistent results when they first start using the Hornady O.A.L. Gauge (formerly the Stoney Point Tool). We’ve found this is usually because they don’t seat the modified case properly and because they don’t use a gentle, consistent method of advancing the bullet until it just kisses the lands.
Here is our suggested procedure for use the O.A.L. Gauge. Following this method we can typically make three of four measurements (with the same bullet), all within .001″ to .0015″. (Yes, we always measure multiple times.)
1. Clean your chamber so there is no build-up of carbon, debris, or lube. Pay particular attention to the shoulder area.
2. Screw the modified case on to the O.A.L. Gauge. Make sure it is seated firmly (and doesn’t spin loose). Note, you may have to re-tighten the modified case after insertion in the chamber.
3. Place your selected bullet so that the ogive (max bullet diameter) is behind the case mouth. This prevents the bullet from “snagging” as you insert the tool in the action.
4. Insert the O.A.L. Gauge into your chamber smoothly. Push a little until you feel resistance. IMPORTANT — You need to ensure that the shoulder of the modified case is seated firmly against the front of your chamber. You may have to wiggle and twist the tool slightly. If you do not have the modified case seated all the way in, you will NOT get a valid measurement.
5. Advance the bullet slowly. (NOTE: This is the most important aspect for consistency!). Push the rod of the O.A.L. tool gently towards the chamber. DON’T shove it hard! Easy does it. Stop when you feel resistance.
6. IMPORTANT. After gently pushing on the rod, give the end of the rod a couple forward taps with your finger. If your bullet was slightly skewed, it may have stopped too far back. Adding a couple extra taps will fix that. If the bullet moves after the taps, then again push gently on the rod. NOT too much! You just want to push the bullet until it just “kisses” the lands and then stops. Do NOT jam the bullet into the rifling. If you do that you will never get consistent results from one measurement to the next.
* For a $15.00 fee, Hornady will make a custom modified case for you if you send two fired pieces of brass. Send two fired cases and $15.00 check to: Hornady Manufacturing, Attn: Modified Cases, 108 S. Apollo St., Alda, NE 68810. More Info HERE.
How well can the little 6mm Dasher perform at 1000 yards when the conditions are good, and the shooter is riding a hot streak? Well here’s a shot-by-shot record of Scott Nix’s 4.554″ ten-shot group shot at Missoula, Montana at the Northwest 1000-yard Championship a few years back. All 10 shots were centered for a 100-6X score. That’s about as good as it gets. If Scott had stopped after 5 shots, his group would have been under three inches.
Video Demonstrates Amazing 1000-Yard Accuracy
Watch the video. You can see the group form up, shot by shot. It’s pretty amazing. Scott’s first shot (at the 45-second mark of the video) was right in the X-Ring, and four of Scott’s first five shots were Xs. That’s drilling them! This video was recorded from the pits at the 1000-yard line, during record fire.
How well can the little 6mm Dasher perform at 1000 yards when the conditions are good, and the shooter is riding a hot streak? Well here’s a shot-by-shot record of Scott Nix’s 4.554″ ten-shot group shot at Missoula, Montana at the Northwest 1000-yard Championship a few years back. All 10 shots were centered for a 100-6X score. That’s about as good as it gets. If Scott had stopped after 5 shots, his group would have been under three inches.
