Hunters are generous people. More than 11 million meals were provided to the less fortunate through hunters’ donations of game meat in 2010. Nearly 2.8 million pounds of game meat made its way to shelters, food banks and church kitchens and onto the plates of those in need. As a reminder to all hunters to consider sharing their harvest this autumn with those in need, NSSF has developed a new webpage to helpe hunters make venison donations to food banks and other charitable meal providers. Learn more at the Hunters Feed website.
Serious reloaders know that PMA Tool makes some of the best specialty reloading tools you can buy. To help folks get the most out of their 21st century products, the company has created a new informational website. PMA’s Pat Reagin explains: “We have created a side-site, linked off of our main website, that is just for information. We will adding new product tips regularly. On this page we will post in-depth information about our tools, videos, customer-submitted information and photos, as well as a calendar of shooting events.” You can access PMA’s “At the Bench” info site at: atthebench.pmatool.com.
One highlight of the new PMA info site is a section dedicated to PMA’s new Micro-Adjust Case Trimmer. Pat tells us: “We’ve had quite of bit of interest in the new case trimmer, but a lot of guys want to see it in action. So we’ve created a couple of videos featuring the new trimmer. The first intro video, linked below, shows how to adjust and use the trimmer in various modes. We also produced a longer, 14-minute Instructional Video with more detail on trimmer adjustment and set-up.”
Watch Micro-Adjust Case Trimmer Video
The PMA Micro-Adjust Case trimmer indexes off the shoulder but it also provides precise control over neck length. You aren’t limited to a built-in, neck-length setting like some other shoulder-indexed trimmers. The PMA Micro-Adjust Trimming tool currently sells for $119.95 including one cartridge insert. The inserts, which can be purchased for $13.95 separately, can often work for a multiple cartridge types within the same family. For example, you can use the same insert for both .243 Win and .260 Rem. There is another insert that works with both 7mm-08 and .308 Win.
PMA Micro-Adjust Case Trimmer Features:
Indexes off shoulder for easy, consistent trim length.
Cases captured in no-scratch, Delrin™ inserts.
Fully rotating head with bearing for smooth operation and clean, square cuts.
Sharp carbide cutter for quick, smooth cuts with minimal burr.
Spring loaded head allows complete control of rate of feed.
How to use the PMA Micro-Adjust Case Trimmer
The trimmer indexes case off the case shoulder through the use of interchangeable Delrin™ inserts which capture the shoulder and neck of the case. This insert is contained in a spring-loaded tool head that rides on a linear bearing. The Micro-Adjust Trimmer can be used in three ways.
First, you can secure the case in a PMA caseholder chucked in a power drill, drill press, or lathe. You hold the trimming tool with your hand and feed in the spinning case. (This method is handy because if you leave the case in the holder, after you have trimmed to length, you can switch tools and chamfer the case-mouth using the same power source).
In the second method, the trimmer’s adjustment knob is removed (after locking the setting) and the cutting shaft is chucked in a drill, drill press. or lathe. Using this method, the case itself is held by hand and fed into the cutter. Lastly, the trimmer can be used manually, holding the case in one hand and the trimmer in the other. That’s the slowest method, but it works if you do not have power tools handy.
We all know that young people are the future of our sport. Well here’s a tale of a talented young shooter who is already “running with the Big Dogs” at the ripe old age of 10 years. Rory Jacobs, son of Forum member Tom Jacobs, recently competed at the IBS 600-yard Nationals in St. Louis. Rory won the Junior Nationals title and placed 14th in the Two-Gun Overall, finishing ahead of dozens of highly skilled adult shooters with decades of experience. Among all shooters (of any age) at the Nationals, Rory had the sixth-best Heavy Gun score and placed seventh overall in Heavy Gun. This kid has talent, that’s for sure. Of course, it helps to have a father who runs a shooting range. The Jacobs family owns and operates the Vapor Trail Valley Shooting Range, www.vaportrailvalleyllc.com, near Trenton, Missouri.
That handsome rifle was smithed by Jay Cutright, and stocked by Tom Meredith (the stock is one of Tom’s). The rifle features a BAT action and Benchmark barrel chambered in 6mm Dasher (.270″ neck) . At the Nationals, Rory shot Berger bullets pushed by Alliant Reloder 15 powder and CCI 450 primers. The front rest is from Randolph Machine.
Rory Began Shooting at Age Three
Rory started shooting and hunting at a very young age. He got his first .22LR rimfire rifle when he was three years old, and he started going on hunting trips with his father at the same young age. Within a few years he was a skilled hunter, harvesting a turkey and a couple of deer at age 6. When he was very young, his father took him prairie dog shooting several times. That’s when Rory got “hooked” on long-range shooting. He got involved in competitive shooting at age 9 at some rimfire “fun matches”. He moved up to the big leagues a year later, entering his first IBS match this spring (2012). Amazingly, at his first-ever IBS 600-yard match, Rory won Light Gun class overall and he posted the best LG group aggregate. Not bad for a 10-year-old! And how many folks, young or old, can boast that they won their first-ever benchrest match? This kid’s a natural. Not surprisingly, he is currently leading the IBS in the race for Junior 600-yard Shooter of the Year.
A well-rounded young man, Rory has a variety of interests. Along with shooting, Rory enjoys woodworking and he plays in a summer baseball league. He’s a modest, church-going youngster, whose character impressed all those who met him in St. Louis at the Nationals. When asked what he liked most about the National Championship experience, Rory replied: “I liked spending time with my dad, and I really liked helping other people.” Rory added: “The ride home in Gene Ford’s motorhome was cool.” The video shows Rory shooting at 600 yards.
Barnes Bullets has produced some videos showing the processes used to make Barnes’ popular TSX (all-copper), Match Burner (lead-core, copper jacket), and Varmint Grenade (copper jacket, powdered metal core) bullets.
Drawing Copper Wire for TSX Bullets
The first video features the TSX. These all-copper bullets start by drawing and cutting solid copper wire into slugs. The material is first drawn down to the correct diameter and then cut to the proper weight on a large industrial shear press. Great care is taken to ensure the most consistent weight possible. The machines are checked frequently. The video below show how copper wire is sized (in the first black box on the green machine) and then travels over a series of rollers to the cutting station.
Extruding Lead Wire for Bullet Cores
The second video shows the extrusion of lead core material for Barnes’ Originals and Match Burner bullets. First, soft lead is melted into 16″ long by 2 ½” round ingots. The ingots are then fed into a large steel tube and hydraulically forced through a cone at about 3500 psi, producing lead wire. This extrusion process makes the lead wire to the correct diameter. The lead wire is then fed into a cutter that chops it into the correct weight. After cutting, the lead cores are sorted and again fed into the bullet presses.
Powdered Metal Mixing for Varmint Grenade Bullets
The third video shows the mixing of metal for the composite cores in Varmint Grenade bullets. This powdered metal core is one reason why Varmint Grenades fragment so explosively on impact. The core for these bullets (identical to the MPG bullet) is made from a very fine copper and tin powder. After mixing, the metal powder matrix is fed via the hopper into the Fetta press. This machine then feeds the powder into a chamber where it is compressed into a solid core that can be put into a copper jacket. In the video, the powdered metal is fed into the machine on the left. It’s a bit difficult to see, but there is a bottom punch that matches each top punch. The two punches come together to form the core.
This is a very expensive, high-output machine. Fully tooled and set at a reasonable speed, it can make upwards of 90,000 cores per hour!
Story Tip by EdLongRange. We welcome reader story ideas.
American Gunsmithing Institute (AGI) now offers a Firearms Appraiser Course conducted via audio CDs, DVDs, books, and an extensive course manual. The total package costs $2497.00 (Yikes!). We think that’s a lot of money, but the program does include a large library of materials including thirteen (13) audio CDs from top firearms appraisers such as Jim Supica, Director of the National Firearms Museum, and Steve Fjestad, author of the Blue Book of Gun Values.
The course package also includes three of the best gun valuation books in print: Blue Book of Gun Values, Flayderman’s Guide to Antique American Firearms, and American Gunsmiths (Frank Sellers).
Experts Share Knowledge on DVDs
Four multi-media DVDs are also included in the Firearms Appraiser Course. DVD One provides a step-by-step course content review with AGI President, Gene Kelly. In DVD Two, gun expert and auction operator Greg Martin shares his extensive knowledge of gun valuation and auctions.
In DVD Three, Master Gunsmith Gene Shuey covers Firearms Restoration vs. Refinishing. The fourth DVD, “Appraising in Action,” features Gene Kelly and noted collector/appraiser Carey Creech who specializes in Colt Single Action revolvers and Winchester® rifles.
Students Receive Certification after Completion of Course
Once a student has completed the material and passes the course exam, he will receive a certification number and documentation to validate his AGI Certified Firearms Appraiser status. The AGI Firearms Appraiser Course is offered through AmericanGunsmith.com for $2,497.00. (Product ID# FAPCOURSE)
If you need a break from your hum-drum day at the office, how about taking a virtual vacation to Norway, where you can explore the scenic mountains in the Fjord region?
Forum member Kenneth Skorpen (aka “Sal”) has created a cool video of a recent deer-hunting trip in Norway. He didn’t bag a buck on this trip, but the walk in the Fjordland mountains took Kenneth through some spectacular scenery. (At the 11:25 time mark you’ll see an amazing sunset over the Fjord.) Kenneth did encounter a doe that had fallen down the mountain, and apparently broken its neck (14:35 time mark). The terrain is very steep, and Kenneth observed that: “I feel fortunate to be able to do this, but I also feel very tired in my legs. Did you know that the hares around here have shorter left legs due to the steep hills?”
More Hunting/Shooting Videos from Norway
You can watch more interesting hunting and shooting videos from Norway on Kenneth Skorpen’s Streken Vertebrae YouTube Channel. Here are some links:
A new high-octane, gun-oriented TV show, Rapid Fire, debuts October 3, 2012 on the Outdoor Channel. Rapid Fire focuses on military weapons, in particular, full-auto machine guns and other select-fire hardware. The Rapid Fire preview video confirms the new show features plenty of action, with reactive targets, and lots of lead going downrange. The show is hosted by Top Shot Season 1 Champion Iain Harrison, a talented shooter with military training in all types of small arms. Harrison will be aided by co-host Mike Seeklander, Training Director for the U.S. Shooting Academy. While firing legendary automatic weapons is the centerpiece of the show, Rapid Fire will also provide historical background information on a variety of weapons, explaining their design and their role in history.
Rapid Fire Preview Video (Lots of Action!)
Watch the video above to see Harrison and Seeklander try out everything from a hand-crank Gatling to a modern, motorized mini-gun. Sixteen full-auto weapons are featured, including SAWs, BARs, Thompsons, Vietnam-era M60s, HK PDWs and much more. Rapid Fire airs at 8:30 pm and 11:30 pm ET on the Outdoor Channel.
Open Grove Range in Southern California recently hosted an air rifle benchrest match. The Open Grove (SoCal) Regional was conducted in conjunction with the World Postal Championship and U.S. Air Rifle Benchrest nationwide standings, under World Rimfire and Air Rifle Benchrest Federation (WRABF) rules. All shooters competed for individual placements and SoCal Regional standings for this one event. In addition, three SoCal team members, Linzie Boise, Jim Herrick, and John Carter, would have their combined three-person match scores entered into World Postal Match team competition standings. It sounds more complicated than it really was. For most of the shooters this match was all about having fun with good friends. The cost was low, the fun factor was high, and, at the end of the day, everyone left with a big smile. CLICK HERE to View Match Photo Gallery (170 hi-rez pictures).
WATCH Match Video with Shooter Interviews
There were two competition classes: Light Varmint (LV) and Heavy Varmint (HV). Light Varmint class is for rifles weighing no more than 10.5 pounds, with a power limit of 12 foot-lbs-energy (FPE) max power. The Heavy Varmint class allows 15 pounds max weight, with a max power limit of 20 FPE. Any scope magnification is allowed. Unlike ARA rimfire benchrest, you can’t use a one-piece rest; a two-piece set-up (with front rest and rear bag) is required. For more information on Air Rifle Benchrest rules and classifications visit www.wrabf.com and usairriflebenchrest.com.
Hardware and Course of Fire
The rifles used at SoCal Regional are pre-charged using compressed air tanks. The rifles were chambered for either .177 or .22 caliber pellets. While some of the rifles were dedicated benchrest rigs, many were converted/adapted Field Target Rifles. The large side-focus-parallax wheels you see on some of the rifles are used for ranging in Field Target competition. The targets were set at 25 meters. Each target has 25 record bulls. The time limit was 30 minutes per target. Winners were determined based on the Overall Aggregate from the combined scores of three, 25-bull targets. Trophies were awarded to top shooters in HV and LV classes, and the Overall winner.
Comments from Match Director
After seven years as a rimfire benchrest shooter, I found a new passion with these air rifles. The cost involved will vary depending on where one wants to start. The sport right now is developing quickly with barrel manufacturers, custom action builders, and stock makers all getting involved. For Open Grove Benchrest, this event was a huge success in attracting different levels of competitors from first-time shooters to Benchrest regulars. We hope this will be a turning point for attracting new shooters to the sport. We tried to make this a fun family event. People really did seem to enjoy themselves. After the last relay, all the shooters were treated to a lunch. Then we gave out door prizes and awarded trophies to the winners.
Series Premieres 9/12/2012 at 10:00 pm The National Geographic Channel is launching a new TV series about a father and son business, International Military Antiques, that specializes in antique and historical arms. Nat Geo’s new show, Family Guns, has solid production values, and the stars of Family Guns are more reputable than the clowns featured on some other gun-oriented cable TV series. Family Guns airs Wednesday Nights at 10:00 pm on the Nat Geo Channel. Tonight’s debut episode features 1920s-era Tommy Guns and two rare, mint condition World War II sniper rifles.
An international authority on antique weapons, Christian Cranmer first started collecting military antiques at the age of twelve. In the 1970s he began dealing antiques and traveled around the world collecting weapons from government arsenals that were being emptied. He established a reputation as having unrivaled knowledge of military history and antique arms.
In 1969 Cranmer heard about a mythical cache in Nepal. It would take over 30 years, but he would find this stockpile and make the greatest purchase of military antiques in his career. The amazing purchase amounted to over 55,000 firearms, with over 50,000 of them antique—Including 146 bronze cannons, a huge array of edged weapons, musket balls and parts. By 2000, Cranmer had purchased from countries from every corner of the world, and his company, International Military Antiques, had supplied military equipment for films including “Saving Private Ryan”, “Flags of Our Fathers”, “Cold Mountain” and “Inglourious Basterds.” See IMA’s inventory at www.ima-usa.com.
‘Family Guns’ Series Trailer (Worth Watching!)
Preview of ‘Family at War’ — Family Guns Episode 1
Paul Liebenberg of Pistol Dynamics is widely considered to be one of the finest pistol-smiths on the planet. When you ask other well-known pistol-smiths whom they would rank among the very best, Liebenberg is a consensus pick. And Paul’s work is in high demand. There is a multi-year-long waiting list for his custom pistols, mostly built on 1911-platforms.
Some years ago Liebenberg shared his pistol building/tuning knowledge through a professionally-produced video from Panteao Productions. In this two-Disc DVD, Paul Liebenberg demonstrates the procedures he employs when crafting a custom 1911 pistol. The DVD covers all key aspects of customizing the 1911 pistol. Topics covered include: fitting barrel and barrel bushing, installing grip safety and thumb safety, installing and tuning the trigger, installing and tuning extractor and ejector, relieving the mag well, undercutting the trigger guard, lowering the ejection port, and much more. This is a rare opportunity to learn from a master gun builder like Paul Liebenberg. Panteao is accepting pre-orders for the DVD and expects it to be released shortly.
30+ Years Expertise
A trained industrial designer from South Africa, Paul Liebenberg was a member of the World Champion South African Practical Pistol Shooting Team. An NRA High Master and four-gun firearms instructor, Paul competed successfully in many disciplines in the shooting sports.
In 1983 Liebenberg immigrated to the USA and joined Pachmayr Gun Works in Los Angeles where he rose to manage the Custom Gun Shop. In 1985 he opened Pistol Dynamics in Los Angeles to build high-end 1911 competition handguns and Pachmayr pistols on contract to that company. Today Pistol Dynamics is based out of Palm Bay, Florida where Paul continues to build high-end 1911 pistols.
Barnes Bullets has produced some videos showing the processes used to make Barnes’ popular TSX (all-copper), Match Burner (lead-core, copper jacket), and Varmint Grenade (copper jacket, powdered metal core) bullets.
American Gunsmithing Institute (AGI) now offers a Firearms Appraiser Course conducted via audio CDs, DVDs, books, and an extensive course manual. The total package costs $2497.00 (Yikes!). We think that’s a lot of money, but the program does include a large library of materials including thirteen (13) audio CDs from top firearms appraisers such as Jim Supica, Director of the National Firearms Museum, and Steve Fjestad, author of the Blue Book of Gun Values.
Experts Share Knowledge on DVDs
If you need a break from your hum-drum day at the office, how about taking a virtual vacation to Norway, where you can explore the scenic mountains in the Fjord region?
Comments from Match Director
The National Geographic Channel is launching a new TV series about a 
30+ Years Expertise
