Precision Benchrest and F-Class shooters favor premium brass from Lapua, Norma, Peterson, or RWS. (Lake City also makes quality brass in military calibers.) Premium brass delivers better accuracy, more consistent velocities, and longer life. Shooters understand the importance of good brass, but many of us have no idea how cartridge cases are actually made. Here’s how it’s done.
The process starts with a brass disk stamped from strips of metal. Then, through a series of stages, the brass is extruded or drawn into a cylindrical shape. In the extrusion process the brass is squeezed through a die under tremendous pressure. This is repeated two or three times typically. In the more traditional “draw” process, the case is progressively stretched longer, in 3 to 5 stages, using a series of high-pressure rams forcing the brass into a form die. While extrusion may be more common today, RWS, which makes some of the most uniform brass in the world, still uses the draw process: “It starts with cup drawing after the bands have been punched out. RWS cases are drawn in three ‘stages’ and after each draw they are annealed, pickled, rinsed and subjected to further quality improvement measures. This achieves specific hardening of the brass cases and increases their resistance to extraordinary stresses.” FYI, Lapua also uses a traditional draw process to manufacture most of its cartridge brass (although Lapua employs some proprietary steps that are different from RWS’s methods).
After the cases are extruded or drawn to max length, the cases are trimmed and the neck/shoulder are formed. Then the extractor groove (on rimless cases) is formed or machined, and the primer pocket is created in the base. One way to form the primer pocket is to use a hardened steel plug called a “bunter”. In the photos below you see the stages for forming a 20mm cannon case (courtesy OldAmmo.com), along with bunters used for Lake City rifle brass. This illustrates the draw process (as opposed to extrusion). The process of draw-forming rifle brass is that same as for this 20mm shell, just on a smaller scale.
River Valley Ordnance explains: “When a case is being made, it is drawn to its final draw length, with the diameter being slightly smaller than needed. At this point in its life, the head of the draw is slightly rounded, and there are no provisions for a primer. So the final drawn cases are trimmed to length, then run into the head bunter. A punch, ground to the intended contours for the inside of the case, pushes the draw into a cylindrical die and holds it in place while another punch rams into the case from the other end, mashing the bottom flat. That secondary ram holds the headstamp bunter punch.
The headstamp bunter punch has a protrusion on the end to make the primer pocket, and has raised lettering around the face to form the headstamp writing. This is, of course, all a mirror image of the finished case head. Small cases, such as 5.56×45, can be headed with a single strike. Larger cases, like 7.62×51 and 50 BMG, need to be struck once to form a dent for the primer pocket, then a second strike to finish the pocket, flatten the head, and imprint the writing. This second strike works the brass to harden it so it will support the pressure of firing.”
Thanks to Guy Hildebrand, of the Cartridge Collectors’ Exchange, OldAmmo.com, for providing this 20mm Draw Set photo. Bunter photo from River Valley Ordnance.
Story by Boyd Allen
While many top competitive shooters trickle their stick powder charges to a kernel or two, that would be impractical when loading charges for giant naval guns. You may be surprised, but the shells fired by the U.S. Navy’s massive 14″ and 16″ naval guns were also propelled by stick-type extruded powders. You couldn’t trickle these ‘kernels’ though — a single stick or ‘grain’ can be over 2″ long.
The U.S.S. Iowa fires her massive 16″ main battery. The U.S. Navy’s Iowa-class battleships carried nine huge 16-inch Mark 7 cannons in three turrets. The big naval guns were 50 calibers long, i.e. 50 times bore diameter, making the barrels 66.7 feet long from chamber to muzzle.
In connection with a Benchrest Central discussion that drifted to the subject of powders used in large naval guns, I heard from Joe McNeil, whose father was involved in manufacturing those very propellants as a DuPont employee. Joe writes:
“My Dad worked for the DuPont company for over 40 years. Every time the nation went to war he was assigned to the gun powder plants which DuPont ran for the government for $1.00 per year! His last assignment was at the Indiana Ordnance Plant in Jefferson, Indiana from 1952 through 1958. He had a display case made of all of the different powders made at the plant and left it to me. That’s why I have a grain of 16″ gun powder. He took me out to the Jefferson proving grounds once when they tested the powder in a 16″ gun. We watched from a half-mile away but it left a lasting impression when they fired that gun. They actually had a set of rings they fired through to test the performance of the powder and shell. This was a truly fond memory of my Dad and his work.”
Here are some pictures of the gun powder “grains” made during the Korean War at the Indiana Ordnance Works where Joe McNeil’s father worked.
Above is the display case with the different powders manufactured at the DuPont plant. They include: 37 MM/AA, 75MM Pack Howitzer, 50 Cal. 5010, 20 MM 4831, 30 Cal. 4895, 76 MM, 3″, 5″, 90 MM, 4.7″, 240MM, 8″, 280 MM, 175 MM, 155 MM Howitzer, 155 MM Gun M.P., 8″ Gun M.P., 12″, 14, 16″. There are different-sized ‘grains’ for specific rounds.
16-inch/50-caliber gun projectile plus six propellant bags. Display mockup aboard U.S.S. Iowa (BB-61) in San Pedro, CA. Photo by James Madison per Creative Commons CC-BY-SA-4.0 license.
Do you need to pull bullets that have been seated in a case? You can use lever-actuated, collet-type pullers, or inertial hammer-style pullers, but there is a faster solution. The Grip-N-Pull bullet puller is a precision-machined hand clamp that works for multiple calibers. A single Grip-N-Pull can replace several other tools, while being faster to use. With larger-diameter bullets loaded with light-to-moderate neck tension, it works well. The bullets come out pretty easily, with no scuff marks or dents.
For smaller-diameter, .204 to .243 caliber bullets, it may be hard to grip the bullet easily, or you may end up with some jacket damage. And we wouldn’t use this for factory-crimped cartridges. One tip for the smaller-diameter bullets — you can try the tool notch one size smaller than nominal bullet diameter. One Grip-N-Pull owner reports: “I’ve had one for a while and like using it much better than a kinetic puller. I have found with .22 and .24 caliber bullets they pull better using one size down.”
Introduction to Grip-N-Pull — How It Works:
How to Use the Grip-N-Pull
Put your loaded case in the shell-holder on a reloading press. Raise the ram so the bullet is exposed at the top of the press. Then select the correct, caliber-specific slot in the Grip-N-Pull, clasp the bullet firmly, then lower the ram. The bullet withdraws from the case-neck, retained in the tool. Fast and simple. If there isn’t much neck tension (or a crimp), the bullet should come out undamaged.
Not So Great for Small-Diameter Bullets
Watch this video — the tester says the Grip-N-Pull works well with larger-diameter bullets, but there can be slippage with smaller-diameter projectiles, or those with short bearing surfaces. When there is a lot of neck tension, you have to grip extremely hard which can cause your hand to hurt after a while. And the bullets can get marred. (NOTE: For smaller-diameter bullets, it may sometimes work better to use the next size down slot. E.g. use the .22 Slot for .243 bullets.)
This video explains some of the shortcomings of the Grip-N-Pull.
Four Grip-N-Pull Models Available Grip-N-Pull bullet pullers can be used for multiple calibers. For example, the Standard Rifle Grip-N-Pull pulls bullets for these calibers: .17, .20, .22, .24, .25, .26, .27, .28, and .30. The Large Rifle model works with 8mm, .338, .375, .416 and .458. There is a third model for pistol cartridges, and a fourth “Mil-Spec” unit that does 5.56, 7.62, .338 and .50 BMG. Grip-N-Pull bullet pullers are made of 1/4″ heavy-duty #30 stainless steel and are backed by a lifetime warranty.
Speed and Efficiency of Grip-N-Pull
The Grip-N-Pull’s creators claim this hand clamp cuts bullet pulling time in half. For a speed comparison between Grip-N-Pull and a hammer-style (inertial) bullet puller, watch this Extreme Outer Limits video. Bob and Chris Beck do a head-to-head comparison between the Grip-N-Pull and an inertia puller. It’s no contest — the Grip-N-Pull is way faster, and the powder stays in the case.
Pull Comparison — Grip-N-Pull Vs. Hammer-Style Inertial Puller
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Brownell’s — Save $45 on $300 purchase, and Holiday SALE
⏺ Major Discount, plus 4th of July Weekend Sale
Are you looking for a 4th of July holiday savings code? Head over to Brownells for the 4th of July Sitewide Savings Promotion. With Code 45OFF300 you get $45 off any purchase of $300 or more. That’s up to 15% off. In addition, Brownells has discounted a wide selection of products through the weekend including optics, AR parts, reloading tools, triggers, magazines and more. SALE Items HERE. With the discounts and the $45 Off promo, you can save big this holiday weekend.
2. Sportsman’s — Savage Arms Axis XP Scope Combo, $299.99
⏺ Good, reliable deer rifles WITH SCOPE in popular chambering
Here’s a great deal for hunters. How would you like to pick up a great rifle, with a scope, in one of the most popular calibers around all for under $300? Sportsman’s has the Savage Arms Axis XP Scope Combo for just $299.99 complete with a Bushnell 4-12x40mm scope. Chambered in 6.5 Creedmoor, this matte-finished rifle with 22″ barrel is a good choice for deer and small game hunting.
3. Natchez — 4th of July Ammo Sale, Big Savings
⏺ Major savings on rimfire and centerfire ammo this weekend.
For big savings on good factory ammunition, check out the Natchez 4th of July Ammunition Sale. A wide variety of ammo is on sale — from .22 LR to 12 gauge — all at very attractive prices. Along with the significant discounts, Natchez is offering FREE ammo shipping with purchase of $99.99 or more. Ammo sale prices are good through 7/4/22 at 11:59 PM.
4. Creedmoor Sports — Hornady Bullet Sale Plus FREE Shipping
⏺ Good deal on quality ELD, BTHP, and A-Tip bullets, FREE shipping $99+
There’s a big Hornady Bullet Sale running this 4th of July Weekend at Creedmoor Sports. NOTE: After you click the link, select “Hornady” from the brand filter on the left. You can save up to 17% off Hornady bullets, plus get FREE Shipping on orders over $99.99 with code FREEDOM. Along with the three bullet types shown above, Creedmoor Sports has many other Hornady projectiles on sale. Here are some other notable discounted Hornady bullets: .224 68gr BTHP Match, .224 80gr BTHP match, 6mm 110gr A-Tip, 6.5mm 140gr BTHP Match, .308 168gr ELD, .308 208gr ELD.
5. Amazon — Plano All Weather Tactical Gun Case, $129.99
⏺ Excellent hard case at half the price of some others
Traveling with rifles requires a tough, secure hard case. The Plano All Weather Tactical Gun Case fits the bill. With rugged, industrial-strength construction and a continuous Dri-Loc seal, AW2 cases create a watertight and dust-proof shield that protects your gear even in the most extreme conditions. Available in 36″, 42″, and 52″ lengths there’s a size that fits your needs for that next trip. At $129.99, the 52″ case will hold long-barrel match rifles securely with weatherproof protection.
6. Amazon, Dragon AR600 Steel Gongs, $14.99 and up
Shooting steel is fun — you get instant gratification from hearing the “clang” and seeing the gong swing. Shooting steel is also good practice for PRS/NRL events and ground-hog matches. Right now, you can get some great deals on quality AR500 steel targets. These Dragon Target Gongs start at just $14.99 for a 4″-diameter, 3/8″-thick gong. Larger 6″, 8″, 10″, and 12″ gongs are offered in 3/8″ and 1/2″ thicknesses, and a 3-pack of 8″ gongs is available. A 6″-diameter gong is $22.99 (3/8″ thick) or $29.99 (1/2″ thick). The largest 12″-diameter gong in the heavy 1/2″ thickness is $69.99 (or $52.99 in 3/8″ thickness). NOTE: All these Dragon gongs have a center hole allowing more hanging options.
⏺ Great deal for 9mm reloaders — 1000 bullets and 1000 cases
Here’s a great deal for pistol shooters who handload 9mm Luger ammunition. Midsouth offers a 9mm Loader Pack featuring 1000 124gr FMJ bullets and 1000 JAG brand new brass cases. This is a great deal for anyone who reloads large supplies of 9mm ammo for fun shooting or competition.
8. Amazon — Caldwell Matrix Rest, $49.49
⏺ Very versatile rest for pistols and hunting rifles
For benchrest competition and varmint matches you’ll want a high-quality, heavy metal front rest. However, for pistol shooting or sighting-in a hunting rifle, a less expensive, easier-to-transport support can do the job. The budget-priced Caldwell Matrix Combo Rest can perform those tasks. Now available for just $49.49 on Amazon, this rest features a spring-loaded elevation system for fast, one-handed adjustment. NOTE: The rear portion of the rest is detachable, so you can shoot handguns using just the front rest section.
9. Amazon — Midland Walkie-Talkie Set, $69.99
⏺ Highly-rated units with impressive range and 50 channel
Walkie-Talkies are “must-have” items for long-range hunting and ELR shooting. They are also great for communicating with a buddy who is down-range setting or recovering targets. The 50-CH Midland GXT1000VP4 Two-Way Radio set is Amazon’s #1 Best Seller among FRS/GMRS Handheld Radios. Priced at $69.99, this Midland two-unit kit includes earbuds plus both 12V and 120V chargers. This Midland set features 50 Channels with impressive range plus “whisper mode”, so they’re good for hunting. These units include VOX for hands-free operation and even offer NOAA Weather Scan capability.
10. Amazon — 3-Pack In-Safe Storage Cases, $16.99
⏺ Very handy, effective cases for in-safe handgun storage
Storing a big collection of firearms, valuables, and other items in your safe requires smart organization. A simple way to keep things organized is with this 3-Pack in-Safe Storage Cases . Designed to protect handguns and valuables, while optimizing storage, these see-through cases provide extra protection, while letting you quickly identify the contents.
Federal Ammunition offers advanced Syntech ammunition with polymer-encased projectiles. American Eagle Syntech is the first range-specific factory-loaded ammunition designed to reduce fouling and extend barrel life with a high-tech polymer bullet coating plus specially-formulated clean-burning powders. The potential for reduced wear and fouling is real. When tested against conventional FMJ ammunition, Federal claims Syntech produced an average of 12% less barrel friction and 14% less heat. Also, since Syntech bullets lack a metal jacket, there is less chance of ricochets on steel targets.
User reviews have been highly positive:
Syntech ammo does what it says, I’ve tested it. Barrel stays cooler, easier to clean without lead or copper fouling. Extremely reliable — the Syntech coating aides in the feeding cycle.
This my favorite ammo for shooting steel plates. Makes a terrific sound when hitting. Far less barrel cleaning after a day of shooting.
Great range ammo. Clean pistols less often.
Federal now offers Syntech ammunition in 9mm Luger, 40 S&W, and .45 ACP. These three calibers are offered in various bullet weights with both round-nose and flat-nose bullet options. The best value is a 9mm Luger bulk-pack with 500 rounds for $239.99 at MidwayUSA.
For years this Editor has loaded his .45 ACP and .44 Mag handguns with polymer/moly matrix-coated bullets from Precision Bullets in Texas. Those poly/moly-encased lead bullets shot VERY accurately and I found that my barrels fouled much less than with conventional lead bullets. Likewise, there was much less cylinder fouling on my revolvers. If the American Syntech bullets work as well as those Precision bullets, we think the Syntech line will be a winner. Syntech bullets should benefit any shooter who frequents a range where conventional lead ammo is not allowed.
Features & Benefits
• Polymer-encapsulated Syntech bullet prevents metal-on-metal contact in the bore, eliminating copper and lead fouling, while extending barrel life.
• Exclusive primer formulation provides reliable, consistent ignition.
• Clean-burning propellants minimize residue and fouling.
• Significantly reduces the required frequency of cleaning.
• Absence of a copper jacket minimizes splash-back on steel targets.
In June 2020, Hornady introduced the 6mm ARC, a new SAAMI cartridge optimized for AR-platform rifles*. The new 6mm ARC is basically a 6.5 Grendel necked down to 6mm, with the shoulder moved back around .030″. That pushed-back shoulder does reduce case capacity (and velocity), but we assume Hornady did that to create a shorter, proprietary chamber so people could not simply neck-down Lapua 6.5 Grendel brass, as has been done for years with Robert Whitley’s outstanding 6mm AR wildcat.
What Is the 6mm ARC Cartridge? The 6mm ARC cartridge is a new SAAMI-spec cartridge based on the 6.5 Grendel case necked down for 6mm bullets, with the shoulder moved back 0.030. Yes it is designed to run in AR15-platform rifles. You’ll need a new barrel, bolt, and mags. If you already have an AR chambered in 6.5 Grendel, the ONLY thing you need to change is the barrel. Everything else — bolt, magazines, gas system – is compatible with 6mm ARC.
▶ Official SAAMI Cartridge (not wildcat)
▶ Fits standard AR15-platform rifles
▶ Fits Short/Mini action bolt rifles
▶ Efficient short, fat case design
▶ 30-degree case shoulder
What Do I Need To Shoot the 6mm ARC?
Faxon and Ballistic Advantage are already producing barrels, with more manufacturers sure to follow. All the other required components are already on the market for 6.5 Grendel rifles. Aero Precision already offers complete 6mm ARC uppers.
If you’re converting a standard 5.56×45 mm (.223 Rem) AR15 upper to shoot 6mm ARC, you’ll need a 6mm barrel, a Type II 6.5 Grendel bolt carrier group, and new magazines. Some folks have suggested standard AR mags will work, but trust us, you want the magazines that have been designed for 6.5 Grendel. All the hardware you need is currently available at Brownells.
* While 6-6.5 Grendel shooters are known to run stout pressures, the new 6mm ARC cartridge has a relatively moderate Maximum Average Pressure (MAP) rating of 52,000 psi according to the official SAAMI specifications. For a variety of reasons, is wise to keep pressures in a semi-auto rifle moderate. Don’t chase the velocities you might get in a bolt-action gun.
Whidden Gunworks makes great sizing and seating dies. The Whidden full-length sizing die with neck bushing is very popular because it allows you to “tune” the neck tension by using different bushings, with larger or smaller inside diameters. In this video, John Whidden explains how to choose a the right bushing size for use with your neck-sizing and full-length sizing bushing dies.
For most applications, John suggest starting with the caliper-measured outside diameter of a loaded cartridge (with your choice of bullet), and then SUBTRACT about three thousandths. For example, if your loaded round mics at .333, then you would want to start with a 0.330 neck bushing. John notes, however, that you may want to experiment with bushings, going down a thousandth and up a thousandth. With thin In addition, as your brass ages and the necks harden, you may want to change your bushing size.
Quick Tip: Try Flipping Your Bushings
You may also want to experiment with “flipping” your neck bushings to alternate the side that first contacts the neck of the case. (One side of the bushing is usually marked with the size, while the other side is unmarked.) So try “number side up” as well as “number side down”.
Some folks believe that one side of the bushing may allow a smoother entry, and that this can enhance concentricity. Other people think they can get very slightly more or less neck tension depending on how the bushing is oriented. This is a subtle effect, but it costs nothing to experiment.
If one bushing orientation proves better you can mark the “up” side with nail polish so that you can always orient the bushing optimally. NOTE: We have confirmed that some bushings are actually made with a slight taper. In addition, bushings may get distorted slightly when the brand name and size is stamped. Therefore there IS a reason to try both orientations.
Want to show off some groups you’ve shot? Or keep a handy pack of mini-targets in your range kit? Then check out this unique product from stockmaker Bell & Carlson. Shoot’n Aces cards feature a 1-inch black square aiming box with a 1/2-inch inner square. These cards are normal poker-playing-card size, 3.5″ high x 2.5″ wide (89 × 64 mm). Shoot’n Aces cards come 56 to a pack. Carry a few extras in your wallet or a pack in your vehicle glove compartment and you’ll always have a precision target to shoot at the range. Cards can be stapled or taped to target stands.
Sniper Central says these cards work well as targets: “The bold square is easy to pick up with the inner white portion making a nice aiming point. The material of the cards is the same as normal playing cards and the bullets make a very nice hole when passing through.” The sharp edges of the bullet holes makes it easy to measure group sizes with precision.
Each pack of Shoot’n Aces contains 56 premium-quality target cards. If you want some, order Bell & Carlson item SA-2006. This is a set of four (4) card-packs with 56 cards per pack (224 cards total) priced at $20.00 (i.e. $5.00 per pack).
The new 17th Edition of the Cartridges of the World was just released on June 21, 2022. This resource belongs in every serious gun guy’s library. This massive 704-page reference contains illustrations and load data for over 1500 cartridge types. If you shoot a wide variety of cartridges, or are a cartridge collector, this book is a “must-have” resource. The latest 17th Edition includes 30+ new cartridge types and 1500+ photos. The print version costs $32.50 at Amazon.com plus $3.99 shipping. Or you can get the print book from Amazon 3rd party sellers for $31.33 delivered. The Kindle eBook version costs $17.88.
Updated 17th Edition with Feature Articles
The 17th Edition of Cartridges of the World includes cartridge specs, plus tech articles on Cartridge identification, SAAMI guidelines, wildcatting, and new cartridge design trends. Cartridges of the World, the most complete cartridge reference guide in print, includes a full-color section with feature articles such Cartridges of the AR-15, Creedmoor Cartridge Family, .404 Jeffrey, .30 Carbine, plus “Cartridges and Cans” (suppressors).
View Free Book Sample Content
FREE STUFF for You: If you want to see what you are getting, there is a very large sample section of the previous 16th Edition available online with over 100 pages of content and dozens of photos and illustrations. To access all this FREE INFO, CLICK HERE, then click on the cover photo where it says “Look Inside”.
NOTE: This is content from the 16th Edition, but most is the same in the 17th Edition.
Cartridges of the World 17th Ed. CHAPTERS:
Chapter 1: Current American Sporting Cartridges
Chapter 2: Obsolete American Rifle Cartridges
Chapter 3: Wildcat Cartridges
Chapter 4: Proprietary Cartridges
Chapter 5: Handgun Cartridges of the World
Chapter 6: Military Rifle Cartridges of the World
Chapter 7: British Sporting Rifle Cartridges
Chapter 8: European Sporting Rifle Cartridges
Chapter 9: American Rimfire Cartridges
Chapter 10: Shotgun Shells
Chapter 11: U.S. Military Ammunition
Chapter 12: Cartridge ID by Measurement
Cartridges of the World by author Frank C. Barnes was first published in 1965. The 17th Edition is edited by W. Todd Woodard, Editor of Gun Tests magazine and author of several firearms reference books. Frank Barnes (1918-1992) began collecting information on handgun cartridges at the early age of 12, thanks to his father, a police officer. Frank Barnes was an innovative cartridge designer, who invented the original 308 x 1.5″ Barnes, predecessor of the 30BR case.
Before Frank began a law enforcement career, he was a college professor. Frank was also a pilot, and a race-car driver. Learn more about Cartridges of the World (17th Ed.) at GunDigestStore.com.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Midsouth — Powders in Stock: Hodgdon, Accurate, VV and More
⏺ Save $200 on highly-rated Sightron Scopes now through June 30, 2022
Good news for handloaders — we are starting to see more powders available at gunstores and online retailers. Right now Midsouth has 70+ powder types IN STOCK and ready to ship. Choose among Hodgdon, Accurate, Vihtavuori, Ramshot and other brands. Sorry no Varget or H4350, but there are some very good alternatives. We also recommend you check regularly with Powder Valley, which had some Varget and Alliant 15.5 TS recently. These powders (along with H4350) do sell out almost immediately.
2. Bruno’s — Open Box Nightforce Scope Sale, Save $200+
⏺ Save big bucks on high-magnification Nightforce competition scopes
Save $200+ on your next long-range competition scope. Bruno’s has slashed prices on Open Box Nightforce scopes. Get a 12-55x52mm Nightforce Competition for $2195.00. That’s $205 less than the $2400.00 price at other vendors. Or get a 12-42x56mm Nightforce for just $1325.00 — hundreds less than the original MSRP. NOTE: These are NEW scopes, but deeply discounted as “Open Box” items. These still have the full Nightforce lifetime warranty to the purchaser.
3. Midsouth — RCBS Explorer Reloading Kit, $299.99
⏺ RCBS Kit includes all vital tools — good for new hand-loaders
Good news — Midsouth has RCBS Explorer Press Tool Kits on sale for $299.99. That’s $65 off the regular price. Great for folks getting started in reloading, this kit includes the single-stage press, powder measure, priming tool, trickler, digital scale, load manual, and various accessories. Get the RCBS Explorer Kit 2 for $299.99. If you want a bigger press, Midsouth also has the Rebel Master Reloading Kit for $359.99, marked down from $489.99. This includes everything in the Explorer kit, but with the beefier Rebel press and a few more tools.
4. Palmetto SA — S&W M&P 15-22 Rifle Package, $429.99
⏺ Good, reliable rimfire AR clone for NRL22 and cross-training
This Smith & Wesson AR-style M&P15-22 provides the fun of an AR15 with the low cost of rimfire ammo. This can work well for cross-training or NRL22 matches. The S&W M&P 15-22 SPORT features a slim M-LOK handguard that easily accepts a variety of accessories without removing the handguard. The M&P15-22 SPORT comes standard with removable Magpul MBUS front and rear folding sights. This $449.99 package includes 3 magazines and a nice gun case.
⏺ Great price on versatile, well-designed gun vise
Here’s an excellent gun vise on sale for just $37.99. The versatile MTM GV-30 CaseGard Gun Vise supports rifles and shotguns for cleaning/maintenance. High and low forks allow level or angled gun placement. The rubber-padded rotating stock clamp provides a firm hold. The base has 14 different compartments for tools/solvents, plus 11 slots for jags, brushes, and screwdrivers. On the side are tabs for two cleaning rods. This GV-20 vise is made from rugged, solvent-resistant polypropylene plastic. If this sells out on GunZoneDeals, Midsouth has the GV-30 Vise for $40.38.
6. Creedmoor Sports — Sightron Scope Sale, Save $200
⏺ Save $200 on highly-rated Sightron Scopes now through June 30, 2022
If you’re looking for a great deal on a solid, competition-worthy optic, check out the Sightron Sale at Creedmoor Sports. They have a large selection of the most popular scopes in the Sightron lineup all at prices you can’t pass up. You can save $200 on the SIII 8-32x56mm and save $200 on the SIII 10-50x56mm model. Both are great choices for benchrest or F-Class Competition. Varminters should consider the S-TAC 4-20x560mm, now discounted from $529.99 to $449.99.
7. Palmetto SA — .22 LR Rimfire Ammo, $3.99-$5.99/50rd Box
⏺ Really good deals on accurate and reliable rimfire ammo
Need reliable .22 LR ammo at a great price? Palmetto State Armory has great rimfire ammo deals going right now. Leading off is Norma Tac-22 for just $3.99/box. Despite the super-low price, this is very good ammo that has shown excellent accuracy. Next, at $4.99/box, Federal Champion 40gr ammo is also an excellent deal. And for a buck per box more ($5.99/box), consider the CCI Quiet-22 45gr ammo. This 835 fps Quiet-22 cuts the volume of standard 22 LR rounds dramatically, while still cycling through semi-auto rifles and handguns. These and other .22 LR ammo types are in stock now at PSA.
8. Pyramyd Air — Crosman 1377C/PC77 Air Pistol, $64.99
⏺ Excellent, budget air pistol for training and fun shooting
Here’s a classic American air pistol for just $64.99. The Crosman 1377C/PC77 pneumatic pistol has been enjoyed by countless American shooters for decades. 10 pumps sets the pressure. This pistol is suitable for plinking, paper targets, and reactive targets. Trigger is about 4 lbs., and accuracy is very good, as you can see in the test video below:
This pistol comes with a 10.25″ barrel, blade front sight and adjustable rear sight. You can mount a pistol scope with the Crosman 459MT intermount (sold separately). This is a very ergonomic pistol, with great reliability and impressive accuracy.
9. Amazon — Universal Gun Cleaning Kit, $39.99
⏺ Great value for cleaning kit for pistols, rifles, and shotguns
This Universal Gun Cleaning Kit has just about everything you need to clean any firearm, all packed in a handy transport case. The kit includes jags, brushes, bore mops, slotted tips, and lots more. The fitted jags and slotted tips are made from solid brass and marked by caliber. The cleaning rods and accessory adapters are also made from brass. Included in this easy-to-carry kit are: 6 gun rods, 13 gun jags, 4 slotted tips, 9 gun mops, 14 bore brushes, 3 muzzle guards, 3 utility brushes, 3 accessory adapters, 4 polishing cloths, 100 cleaning patches, 2 oil bottles (empty), and even a gun cleaning mat. NOTE: For competition rifles, we recommend using high-quality ONE-PIECE cleaning rods.
10. Amazon — Large Digital Display Timer, $12.95
⏺ Use in Matches — Count-Down or Count-UP, handy big buttons
If you shoot in a discipline with time limits, or you time your firing strings during practice, having a reliable and easy-to-read timer is critical. One of our favorite timers is this very affordable Digital Display Timer with both count-up and count-down functions. It boasts an easy-to-read display and LARGE buttons making it perfect for F-Class, Palma, and other matches. This timer comes with both a built-in stand AND a strong magnet so you can position the timer conveniently.
Precision Benchrest and F-Class shooters favor premium brass from Lapua, Norma, Peterson, or RWS. (Lake City also makes quality brass in military calibers.) Premium brass delivers better accuracy, more consistent velocities, and longer life. Shooters understand the importance of good brass, but many of us have no idea how cartridge cases are actually made. Here’s how it’s done.
The headstamp bunter punch has a protrusion on the end to make the primer pocket, and has raised lettering around the face to form the headstamp writing. This is, of course, all a mirror image of the finished case head. Small cases, such as 5.56×45, can be headed with a single strike. Larger cases, like 7.62×51 and 50 BMG, need to be struck once to form a dent for the primer pocket, then a second strike to finish the pocket, flatten the head, and imprint the writing. This second strike works the brass to harden it so it will support the pressure of firing.”
Quick Tip: Try Flipping Your Bushings
