|
|
April 12th, 2012
Stocky’s Stocks has released a new laminated MBR Tooley-style long-range benchrest stock at an affordable price. Dubbed the Bobby Hart’s Ideal Benchrest Stock (IBS), this stock comes inletted for Rem 700 and Rem clone short actions or long actions.
 The basic version of Stocky’s Ideal Benchrest Stock sells for just $499.00 including Pachmayer recoil pad installed. For $100 more ($599.00 total), you can get the stock with a CNC-machined 6061-T6 aluminum “Accublock” bedding block installed in the stock. Stock’s new IBS stock features a 1.25″ barrel channel, 3″-wide fore-end and weighs 4.8 pounds total.
Stock Geometry — Flat Front with Slight Drop in Rear
Note that the underside of the buttstock is NOT parallel with the fore-end. The buttstock has a bit of drop to improve tracking on recoil and to allow elevation “fine-tuning” by sliding the stock fore and aft. While some shooters will prefer parallel geometry, Dave Tooley’s original design did feature a bit of drop in the buttstock. Dave believes this helps the gun recoil more smoothly, without bouncing on the bags. Of course, a few minutes spent with a wood rasp, sandpaper, and a level can remove the slight angle in the underside of the buttstock, if you prefer parallel geometry. These Stocky’s IBS stocks are available in 14 different laminated colors, in either satin or laminated finish. A half-dozen of our favorite laminated patterns are shown below.
Product tip from Boyd Allen. We welcome reader submissions.
April 10th, 2012
 Eurooptics.com now carries the impressive Vectronix Terrapin Laser Rangefinder. The $1995.00 Terrapin is a high-grade, milspec device rated to 2400m, well beyond the stated ranges for LRFs in the $600-$1000 class. Field reports indicated that the Terrapin is very good. One field tester, using a Terrapin set on a tripod, said the Terrapin hit 16″ plates at 800 yards more reliably than a Swarovski Laserguide. Ranging a small object like that at 800 yards is a tough test for any LRF. The Terrapin performs well on smaller objects because it has extremely tight beam divergence (this means the beam doesn’t spread out like a wide cone at long range).
The reports we’ve received indicate that the Vectronix lives up to expectations created by its 2400m distance rating. Jason Baney reports: “This Vectronics is impressive. In the right conditions, these units can range well beyond 2000 yards. On a Snipers’ Hide Thread, Vectronix Terrapin owners have reported ranging successfully past 3000 yards on large objects.” Available in tan or green, the Terrapin has a rugged aluminum inner housing and is rated to be waterproof with 60 minutes of immersion. It is easy to hold, and weighs just 1.1 pounds. Efficient electronics allow the Terrapin to make over 7,000 ranging “shots” before the two CR123 batteries need to be replaced.
April 9th, 2012
Six decades after the introduction of the M16, Colt has added a gas piston system to the venerable AR15. Colt put a gas piston in this new AR-platform rifle in order to improve reliability and reduce fouling. The new gas-piston Colt AR, designated the LE6940P, will be sold to both civilians and law enforcement agencies. In selling a gas-piston AR, Colt is following the lead of Heckler & Koch (HK 416) and other manufacturers who have found a market among buyers seeking a lower-maintenance AR with significantly less internal powder fouling than the original direct-gas-impingement AR design.
Colt’s product press release declares: “Colt Defense LLC … has advanced its one-piece monolithic upper receiver to introduce the LE6940P. This modular carbine has an articulating link piston (ALP) operating system and offers shooters a highly accurate, lightweight and easy-to-clean AR-platform rifle with an extended lifespan. The advanced piston carbine (APC) is a lightweight, highly accurate alternative to the traditional direct gas impingement system found in most ARs. The LE6940P utilizes a unique articulating link piston (ALP) operating system, which reduces inherent stress in the piston stroke by allowing for deflection and thermal expansion. As a result, shooters are offered a highly accurate firing experience and the weapon’s lifespan is extended.”
Piston Design Developed for U.S. Military
 “The new LE6940P puts to use a new, improved version of a piston system that Colt originally pioneered for the U.S. Army,” said David Ridley, Vice President of Colt Defense LLC. Ridley added: “Colt was the first to put a piston system in an AR, and we have continued to improve on that system since. Now, any civilian shooter or law enforcement professional has the opportunity to shoot using this superior piston-operated AR.”
Monolithic Upper with Extended Rail
The LE6940P weighs just over 6.5 pounds, and measures 35 inches with stock extended. The rifle is chambered in .223 Rem (5.56×45 NATO) and uses standard AR15 magazines. Colt delivers the LE6940P with a full-length rail running from the rear of the upper receiver to the front sight. This allows many mounting options for sights and accessories. Colt has also includes a back-up iron sight (BUIS) and a folding front sight. The lower receiver is marked “Piston Carbine” and comes with a Colt/Rogers Super-Stoc M4 H-buffer stock kit with cam-lock lever, push-button QD swivel, and accessory kit. The standard barrel is a 16.5″-long M4-type contour with flash-hider. CLICK HERE for large photos of the internals, plus close-ups of the folding sights.
April 9th, 2012
Here’s a interesting new ammo option for air rifle shooters. Gamo Outdoor USA has introduced new Bone Collector® lead pellets featuring dome tips and grooved skirts. Gamo claims that the rounded nose and grooved skirt makes these pellets more aerodynamic (with a higher ballistic coefficient), so they retain more energy at longer distances. That’s good news for Airgun varmint hunters. The .177 pellet weighs 7.56 grains while the larger .22-caliber version weighs 15.43 grains. Gamo claims that the high weight-to-caliber ratio and higher BC gives Bone Collector® pellets “more terminal penetration than standard lead pellets” and a stable flight trajectory. MSRP is $8.95 per tin (150 pellets/tin in .177 and 100 pellets/tin in .22). Whether the Bone Collector pellets really live up to the marketing hype remains to be seen, but it’s still good to see some new offerings among pellet-makers.
 Nothing New Under the Sun?
While Gamo is claiming that its domed and skirted pellet design is an innovative new aerodynamic design, sharp-eyed Bulletin reader Julio from the UK points out the the Gamo Bone Collector is a dead-ringer for the RWS Superdome pellet, which has been available for quite some time. Check out the photos and you’ll see the similarity.
The RWS Superdome is available in three sizes: .177, .22, and .25. The Gamo Bone Collector pellets are a bit heavier in .22 caliber: Gamo’s .22-cal Bone Collector is 15.43 grains compared to 14.5 for the .22-cal Superdome. But the RWS .177-cal Superdome is 8.3 grains compared to 7.56 grains for the bone Collector. And Gamo has nothing to match the jumbo 31.0 grain .25-caliber Superdome.
April 5th, 2012
Forum member Stan C. (aka BigBamBoo) has created an impressive FREE online database of shooting ranges and clubs throughout the fifty United States, plus Canada. Stan’s new website, ShootingPlaces.com, is simple to use — and it is wicked fast. A handy state/province pull-down menu lets you instantly find all the shooting venues in any particular U.S. State or Canadian Province. Alternatively, you can search for ranges within a given radius of a location or zip code — that’s great when you want to narrow your focus to a particular metropolitan area. The database is very comprehensive, and search results came up almost instantly for us. We ran searches for a number of zip codes near the AccurateShooter.com offices in southern California. Overall the results were impressive, though there was a prominent omission — the Ojai Valley Gun Club, our ‘home range’, didn’t appear. So be aware that the database may not be 100% just yet. But with time, it should become more complete, as users can submit their entries to augment the database.
ShootingPlaces.com employs Google mapping technology that automatically maps the location of all search results. Each shooting facility (returned by the search) is shown by a “bullseye” tag on a regional map. Click the name of a particular facility, and the display switches to a site-specific layout with details about the facility, plus a street map you can use to get there. See example below:
 ShootingPlaces.com vs. WheretoShoot.org
Credit Stan C. for working very hard over the last couple of years to create a database that is comprehensive, powerful, fast, and easy to use. ShootingPlaces.com is a great resource for shooters throughout the USA and Canada. ShootingPlaces.com is a genuine rival to the well-established WheretoShoot.org, an online database of shooting facilities, maintained by the National Shooting Sports Foundation (NSSF).
You may be thinking, “OK, if ShootingPlaces.com and WheretoShoot.org both locate shooting venues, which online directory should I use?” Well, it depends… ShootingPlaces.com is “faster” but WheretoShoot.org is “deeper”. If you simply want to locate and map a shooting range, ShootingPlaces.com is hard to beat for speed and ease of use. However, if want to find out what kind of programs and facilities are offered at a particular shooting range or club, then you should use WheretoShoot.org. The typical site profiles on Wheretoshoot.org are more detailed. For larger clubs, you’ll find details such as range yardages, disciplines supported (silhouette, high power etc.), and specific facilities (clubhouse, on-site camping).
Because ShootingPlaces.com and WheretoShoot.org both have their strengths, we suggest you bookmark both sites. Use ShootingPlaces.com for super-quick searches, and then switch to WheretoShoot.org if you want additional details on specific programs and site facilities.
April 2nd, 2012
 The new Shooterest Shooting System is a hitch-transportable, twin-station shooting bench that deploys directly from your vehicle. You can shoot EITHER with the bench attached to the hitch (and vehicle), or the Shooterest Bench can be detached for stand-alone shooting. The reversible table-tops handle both right- and left-handed shooters.
The Shooterest’s designer, Brian Auer, is a mechanical engineer. He builds Shooterest benches with his brother and father. Brian comments: “The three of us fabricate everything ourselves in our barn workshop in Rathdrum, Idaho. Basically, you can hook up the bench (fully assembled and ready to use) to your vehicle in a vertical position so it won’t hit the ground or extend past the 3-ft legal limit beyond the rear bumper. When you arrive at your shooting location, you pull one pin and move the bench to the horizontal position. You then drop the front stabilizers, maybe adjust your table height if needed, and you’re ready to shoot. The tailgate on a pickup also serves as a handy table to stage ammo, clips, guns, etc. If you don’t want the bench mounted to a vehicle (or if you don’t have a 2″ receiver), you can set the bench directly on the ground using the same parts that attach it to the vehicle.”
Preload the Bench for Added Stability When Hitch-Mounted
Given the fact that vehicles have springs, we were concerned that there might be a little vertical play in the Shooterest when deployed mounted to a hitch. Dan Auer, Brian’s father, explained that you can eliminate any potential “bounce” by putting in a little preload: “With the bench on the hitch mount, just lift up the table a bit and extend the front stabilizers (legs) an inch or two. That preloads the system and pretty much takes up the slack in your truck springs. You end up with a very stable platform that way.”
.gif)
The Shooterest bench system comes in Deluxe and Standard models, both with twin independently adjustable platforms allowing two shooters to shoot simultaneously. The $489.00 Deluxe version features 3/4 inch plywood tops and seats, plus a convenient center-mounted deluxe shell deflector screen. The $389.00 Standard shooting bench has painted 7/16 OSB plywood tables and seats, with standard deflector screen. Both models share these other features:
- Bench can be used mounted to vehicle OR stand-alone (detached)
- Fully-assembled bench can be transported on vehicle receiver
- Bench is constructed from strong, durable steel tubing
- Bench can be disassembled to transport inside vehicle
- Tables adjust for sitting or standing shooting positions
- Seats are 3-way adjustable for height, fore/aft, width from centerline
- Adjustable stabilizer legs can be adjusted for uneven terrain
- Tables are reversible for right- or left-handed shooters
- Bench is wheelchair accessible
For more information, visit Shooterest.com, call (208) 661-5973, or email sales [at] shooterest.com. Currently, Shooterest Benches can only be shipped within the continental U.S. ($40 flat rate) & Canada ($90 flat rate). Installation Tips: Shooterest benches come with one hitch pin, but a second pin will be required for attaching to the receiver on the vehicle. We recommend a drop receiver for any receivers mounted higher than 25 inches on the vehicle.
Product tip from The Firearm Blog.
April 1st, 2012
 Because of draconian restrictions on handguns in the United Kingdom, Olympic smallbore pistol shooters from the UK have been forced to conduct their training in neighboring countries, such as Belgium and France. Obviously, the need to travel overseas to practice their sport has been a major handicap for UK shooters who will compete with Team GB* at the upcoming London Olympics. Said one smallbore pistol shooter: “Our goal is to win a medal for mother England, the 2012 host nation. But it is hard to compete on a world-class level when we can’t even train at home. Going overseas every time we need to practice wastes precious time and money. Other Olympic shooters don’t face these kind of obstacles.”
 With the 2012 London Olympics soon approaching, UK Olympic officials have been looking at ways that Team GB pistol shooters can avoid the need to travel abroad just to practice shooting. Now, through a special act of Parliament, it appears that UK Olympic pistol shooters may finally be able to hone their marksmanship skills at home. A new law will allow qualified Olympic-level pistol shooters on Team Great Britain to import a new, non-lethal training device recently introduced in the United States. With the aid of the American-made Trigger Trainer, UK Olympic shooters can now practice their trigger-pulling skills without risking a trip to prison. The Trigger-Trainer is a plastic device with a pistol grip, and spring-loaded “trigger”. However, it is incapable of firing a projectile because it lacks a barrel, magazine, firing pin, and sights.
Some of Team GB’s shooters have expressed doubts about the usefulness of the rather primitive Trigger Trainer. (As it lacks front and rear sights, the Trigger Trainer is difficult to align precisely on the target). But top British Olympic decision-makers believe that the shooters’ complaints are unjustified. British Olympic Association official Nigel Wensleydale observed: “Complaints? That’s just idle whinging if you ask me… nothing’s perfect you know. Perhaps the Trigger Trainers do leave something to be desired as they come out of the box. But our Olympic shooters are clever lads. I think, with a little imagination and some sticky tape, these Trigger Trainers will be tip-top. Goodness, you could simply tape a drinking straw on top and sight through that. I mean how much precision do these chaps really need — the target’s only 10m away for goodness sake.”
*Great Britain is the name under which the United Kingdom of Great Britain and Northern Ireland competes at the Olympic Games. Great Britain was one of 14 teams to compete in the first Games, the 1896 Summer Olympics, and has competed at every Games. Great Britain is the only team to have won at least one gold medal at every Summer Games.
March 29th, 2012
 If you have a firearms collection, you need an inventory of the guns, with serial numbers, photos, and detailed descriptions. This is important for insurance and law enforcement purposes. If your firearms are ever stolen or destroyed in a fire or other natural disaster you need a complete inventory if you expect to get a proper insurance payout. There is nothing wrong with writing down descriptions of your guns in a “hard-copy” notebook or ledger. However, many gun owners don’t bother to take photos of their firearms, making it difficult to claim full value during loss. Additionally, ledgers are easy to misplace, and, in the event of a fire, your “hard copy” gun inventory may go up in smoke.
JHSTech.com has created Gun Inventory, a handy $0.99 smart-phone App that makes it easy to create a detailed inventory of all your firearms, complete with photos. Gun Inventory works with iPhones, iPods, iPads and all iOS devices (no Android version yet). Using this App, in a few minutes you can inventory all your guns, complete with photos taken with your iPhone’s camera. The app allows you to fill in details such as Make, Model, Serial Number, Finish, Barrel Length, and any other info that can help identify your firearms. After the info is saved, your guns are organized into a easily-navigated list, that you’ll have with you when you leave home. Need an inventory print-out? Just email the list from your iPhone or iPad to any web-mail address.
How Secure Is Your List on a Phone?
In reviewing this product, we initially thought: “It’s a really BAD IDEA to carry around a list of your guns on a cell phone”. If a bad guy accesses your iPhone gun list, he learns you are a prime target for theft, and, unfortunately, your home address can be easily traced from your cell number. But the creators of the Gun Inventory App have given some thought to security. First, the App has an optional password protected login screen. By all means, if you use this App, use the password protection! (We wish the log-in screen did not say “Gun Inventory” — that’s enough to tell thieves that you’re a gun owner. The App developers should create a “stealth” entry screen with a title such as “Baby Pictures”.) Second, if you lose your phone, you can delete your gun list using the remote wiping features that come on iOS devices. The Gun Inventory App can be purchased for just $0.99 through the iTunes App Store.
March 28th, 2012
 Ruger just announced its new Ruger 10/22 Takedown rifle. This lightweight rimfire rifle comes apart into two sub-assemblies in a matter of seconds. The 4.67-pound Ruger 10/22 Takedown is 37″ long when assembled; each sub-assembly is less than 20 1/4″ long when disassembled. Ruger even supplies a handy storage case to hold the disassembled Ruger 10/22 Takedown.
The barrel and fore-end of the Ruger 10/22 Takedown are easily separated from the action and buttstock by pushing a recessed lever, twisting the sub-assemblies, and pulling them apart. Reassembly is the reverse of takedown. The friction-fit lockup of the assembly joint can be adjusted, but Ruger says it should rarely need re-setting after initial assembly. Ruger claims that “the lockup is secure and repeatable, ensuring an accurate return to zero, even when receiver-mounted optics are used.”
The Ruger 10/22 Takedown is shipped in a ballistic nylon backpack-style case with internal sleeves to hold the sub-assemblies. External pockets with MOLLE webbing provide storage for magazines, ammunition, and other accessories. Multiple attachment points for the padded, single shoulder strap offer different carrying options.
MSRP is $389.00 with Storage Case
Utilizing the standard 10/22 action and 10-round rotary magazine (one magazine is provided), the Ruger 10/22 Takedown represents a reliable, compact, and portable package at an affordable price. MSRP is $389.00 MSRP, and we expect “Street Price” to settle around $340.00. For more info on the new Ruger 10/22 Takedown visit Ruger.com or Facebook.com/Ruger. To find accessories for the Ruger 10/22 Takedown, such the 25-round Ruger BX-25 magazine, visit ShopRuger.com.
March 27th, 2012
 Here’s good news for .221 Fireball and 20 Vartarg Fans — within the next five to eight weeks, Nosler-brand .221 Fireball brass will hit the market. We just got off the phone with Nosler, whose representatives confirmed that Nosler will be selling 100-ct boxes of .221 Rem Fireball brass very soon (item #10078). Product is expected to start shipping “in a month or two”. Nosler’s .221 Fireball brass is crafted by a third-party supplier, and then final-finished by Nosler at its Bend, Oregon factory.
We tried to find out the name of the third-party source without success. However, Nosler did confirm that this brass “is definitely NOT made by Remington“.
 Expected retail for the Nosler .221 Fireball brass is $60.00 to $80.00. Online retailer Precision Reloading currently has the Nosler-brand .221 Fireball brass on order, with a stated retail price of $69.39 for a 100-ct box, product # NS10078. You’ll find the Nosler .221 Fireball brass on the Precision Reloading website, but it is currently listed as “out of stock”. Check back in a few weeks to see if the Nosler .221 Fireball brass has started shipping yet. NOTE: In addition to the new .221 Fireball offering, Nosler has announced that it will sell brass in three other new calibers: 17 Remington, .222 Rem, and 270 WSM.
As soon as its new .221 Fireball brass becomes available, Nosler has promised to send us samples. We want to see how the Nosler brass compares to Remington-brand .221 Fireball brass — currently the only type on dealers’ shelves. With Nosler’s reputation for quality, we hope the Nosler .221 Fireball brass will be a step up from Remington’s product. The Remington brass does the job but case weights and neckwall thicknesses are not particularly uniform, and the Rem brass is fairly soft.
|
