|
|
April 18th, 2010
 Texan Erik Cortina (aka X3MHunter in our Forum) showcased some great marksmanship recently. Competing at Houston’s Bayou Rifle Club, Erik shot a spectacular 600-49X to break the Rifle Club’s 300-yard F-Class Open division record of 599-32X. Erik smashed the Bayou record, raising the point count to a perfect 600 with 17 more Xs than before. Erik reports: “Conditions were calm, about 65 degrees with about a 1-3 mile wind from right to left. I would say they were almost perfect conditions. I was there at the right place at the right time!” Eric’s three strings, in order, were: 200-17X, 200-16X, and 200-16X. That’s consistency! In setting the new record, Erik demonstrated how accurate the 6.5 x 47 Lapua cartridge can be. (Note: There is no official NRA 3x20x300-yard F-Open Record at this time. The NRA currently logs only an individual 20-shot 300-yard F-Open record, which was set by Shiriz Balolia, with a perfect 200-20X).
We know many of our readers have built, or plan to build, a 6.5×47 Lapua match rifle. The question often arises: “What powder should I shoot and what weight bullet?” We normally advise people to start with bullets in the 120-130 grain-range with a powder such as Varget or Reloder 15. However, the unique properties of Reloder 17 offers a “heavy bullet solution.” In the hands of Asst. Editor Jason Baney, our AccurateShooter.com 6.5×47 Lapua test rifle shot the 140gr Bergers very accurately using Reloder 17. In fact, Jason’s most accurate 200-yard load was with the 140s and RL17.
 Erik Cortina also found that the 6.5×47 cartridge can work superbly with 140 grain-class bullets. Erik shot the 139gr Lapua Scenar bullets (jammed .020″ in the lands) with a stout load of Reloder 17 (more than 40 grains). Erik was able to drive the 139gr Scenars well over 2900 fps with the small 6.5×47 case. Erik tells us: “I developed this load doing a ladder test at 500 yards. This might be a very hot load in most rifles but mine is throated specifically for the 139 Scenars since I didn’t plan on shooting anything else. This load does not show pressure signs on my rifle.” Erik got great accuracy with minimal brass prep: “The Lapua 6.5×47 brass is great. After uniforming the primer pockets, I tried to weight sort but only found .3 grains variance on 300 pieces of brass, so I just loaded the brass and went shooting.”
Rifle Components and Smithing
Erik’s rifle features a Lawton 7500 RBRP left-eject action, mated to a 1:8″-twist, 28″ Krieger barrel. The barrel was chambered for a no-turn 6.5×47. The stock is a Richard Franklin Low Rider made by West Custom Rifles. The rifle was smithed by Mark Pharr of Tumbleweeds Custom Rifles.
March 29th, 2010
2010 F-Open Class Champion Derek Rodgers, a young shooter from Albuquerque, New Mexico, proved that youth and skill can triumph over age and experience. Though Derek had placed third in F-TR class at the 2009 Nationals, this was Derek’s very first year competing in Open Class at the Nationals, and his NRA Classification was “Sharpshooter”. Derek’s win was a great victory for an unheralded newcomer. On the last day of the competition, Derek put together three superb 1000-yard matches, out-shooting High Masters and past National Champions to secure the Open Class title. Derek finished with 1330-57X, five points ahead of runner-up Ken Dickerman (1325-57X).
Ironically, Derek only decided to shoot in Open Class only because his favorite F-TR rifle is currently being upgraded by his gunsmith, and so the rifle wasn’t ready for the Nationals. (We suspect some F-Open competitors wish that gunsmith had finished Derek’s F-TR rifle a bit sooner).
 Derek brought a 300 WSM to the Nationals, a “big boomer” by F-Class standards. A fan of “heavy bullets”, Derek loads his 300 WSM with high-BC, 210gr JLK bullets. In Derek’s home state of New Mexico, strong winds are the norm. Shooting in those conditions has shown Derek the effectiveness of heavy 30-caliber bullets at long range. Derek’s load certainly shot well in the windy conditions during the final 1000-yard match on Sunday. While some of Derek’s success can be attributed to his wind-bucking WSM (built by Score High Gunsmithing in New Mexico), he also is a careful reloader who “goes the whole nine yards” to produce the best possible ammo. Derek anneals, weight-sorts and neck-turns his Remington brass. He weight-sorts and ogive-sorts his 210gr JLK bullets, and he points up the tips for uniformity. He spared no effort in loading for the Nationals because he knew “those other guys are really, really good.”
The Sierra Cup (at left) is presented each year to the U.S. F-Open Class National Champion. This year Derek Rodgers’ name will be placed on the trophy alongside other F-Open Champions including John Brewer (2004), Jeff Cochran (2005), Eric Bair (2006), Robert Bock (2007), and Charles Ballard (2008, 2009).
March 29th, 2010
The 2010 U.S. F-Class Nationals concluded yesterday. It was a big success, drawing nearly 120 individual competitors and 18 teams. Young Derek Rodgers (Sharpshooter Class, 1330-57X) from Albuquerque, New Mexico, is the new Open Class Champion, and Californian Lane Buxton (1302-42X) won the F-TR division using a .308 Win Palma Rifle with Sierra #2156 bullets. Forum member Ken Dickerman finished second in F-Open posting a 1325-57X. Past multi-time F-TR Champ Danny Biggs shot F-Open this year, finishing third with a 1324-67X. While we are still waiting to receive ALL the final official results, it appears Danny set the high X-count for the match, while shooting with a Sinclair bipod equipped with a vertical adjustment knob. (The Open-class guns work amazingly well off the wide-base bipods.) Charles Ballard, the reigning (back to back) F-Open champ, finished seventh in F-Open.
 |
 |
New F-Open Champ Derek Rodgers was shooting a 300 WSM with 210-grain bullets. This heavy bullet/short magnum combo performed well in the windy afternoon conditions during Sunday’s afternoon matches. Most of the other top F-Open competitors were shooting a .284 Win or some other 7mm. Charles Ballard told us told us: “with so many guys shooting 7mms this year, the competition is tougher than ever. If I had a caliber advantage before… that’s gone. With the winds we had in the afternoons, I’m not surprised Derek Rogers did well with his 300 WSM and the heavy bullets. I want to congratulate Derek on his well-deserved win.”
The team event was hotly contested, with 18 teams on the line, most of which were in F-TR Class. In Open Class, the North American Shooters Team, coached by Bryan Litz won the Berger Trophy for the 600 + 1000-yard combined Aggregate, as well as the 1000-yard Team Match. The Sierra Spindle Shooters team took first place in the 600-yard Team Match. In F-TR Team shooting, Savage Shooters pulled off a clean sweep, winning the 600-yard match, the 1000-yard match, AND the Team Aggregate. Congrats to Savage Shooters!
NAS Team shooters (left to right): David Mann, Dean Morris, Bryan Litz (coach), Rick Jenson, Larry Tait.
F-Open Class Results
Winner: Derek Rodgers (Sharpshooter) – 1330-57X Nat’l Champion
Second: Ken Dickerman (High Master) – 1325-57X
Third: Danny Biggs – 1324-67X – High X Count?
Fourth: Jeff Cochran – 1324-28X
Fifth: Jeff Traylor – 1323-51X
High Woman: Brenda Hill – 1302-31X
High Senior: Larry Bartholome – 1321-51X
High Grand Senior: Danny Biggs – 1324-67X
F-TR Class Results
Winner: Lane Buxton – 1302-42X – National Champion
Second: Robert Lach – 1297-36X
Third: John Hayhurst – 1293-37X
Fourth: Jeffery Rorer – 1293-28X
High Senior: Robert Lach – 1297-36X
High Grand Senior: Peter Church – 1279-31X
Complete Results for Download
Check the attachments for all the scores. FCNAT2010OPEN.doc has all the F Open scores and FCNAT2010TR.doc has all the F-TR scores.
Download All F-Open Scores/Standings | Download All F-TR Scores/Standings
March 28th, 2010
Coating bullets with a friction-reducing compound such as Molybdenum Disulfide (Moly) offers potential benefits, including reduced barrel heat, and being able to shoot longer strings of fire between bore cleanings. One of the effects of reduced friction can be the lessening of internal barrel pressures. This, in turn, means that coated bullets may run slower than naked bullets (with charges held equal). To restore velocities, shooters running coated bullets are inclined to “bump up” the load — but you need to be cautious.
Be Careful When Increasing Loads for Coated Bullets
We caution shooters that when your start out with coated bullets in a “fresh barrel” you should NOT immediately raise the charge weight. It may take a couple dozen coated rounds before the anti-friction coating is distributed through the bore, and you really start to see the reduced pressures. Some guys will automatically add a grain or so to recommended “naked” bullet charge weights when they shoot coated bullets. That’s a risky undertaking.
Instead we recommend that you use “naked” bullet loads for the first dozen coated rounds through a new barrel. Use a chronograph and monitor velocities. It may take up to 30 rounds before you see a reduction in velocity of 30-50 fps that indicates that your anti-friction coating is fully effective.
We have a friend who was recently testing moly-coated 6mm bullets in a 6-6.5×47. Moly had not been used in the barrel before. Our friend had added a grain to his “naked” bullet load, thinking that would compensate for the predicted lower pressures. What he found instead was that his loads were WAY too hot initially. It took 30+ moly-coated rounds through the bore before he saw his velocities drop — a sign that the pressure had lowered due to the moly. For the rounds fired before that point his pressures were too high, and he ended up tossing some expensive Lapua brass into the trash because the primer pockets had expanded excessively.
LESSON: Start low, even with coated bullets. Don’t increase your charge weights (over naked bullet loads) until you have clear evidence of lower pressure and reduced velocity.
Procedure After Barrel Cleaning
If you shoot Moly, and clean the barrel aggressively after a match, you may want to shoot a dozen coated “foulers” before starting your record string. Robert Whitley, who has used Moly in some of his rifles, tells us he liked to have 10-15 coated rounds through the bore before commencing record fire. In a “squeaky-clean” bore, you won’t get the full “benefits” of moly immediately.
 To learn more about the properties of dry lubricants for bullets, read our Guide to Coating Bullets. This covers the three most popular bullet coatings: Molybdenum Disulfide (Moly), Tungsten Disulfide (WS2 or ‘Danzac’), and Hexagonal Boron Nitride (HBN). The article discusses the pros and cons of the different bullet coatings and offers step-by-step, illustrated instructions on how to coat your bullets using a tumbler.
March 27th, 2010
 Lyman Products has introduced a new Universal Case Prep Tool Set that contains all the tools need for chamfering case-necks and uniforming primer pockets on all common sizes of brass. The new Tool Set features eight (8) separate tools, all with ergonomic handles with rubber inserts. A handy zippered case with elastic straps allows you to keep the tools organized on your loading bench. The Tool Set, Lyman product #7810212, includes large and small primer pocket reamers, large and small primer pocket cleaners, outside deburring tool, inside (VLD) chamfer tool, and large and small primer pocket uniformer tools.
MSRP for the Universal Case Prep Tool Set is $69.95, but we expect the Set to sell for about $55.00 retail. Currently, Midsouth Shooters Supply has the 8-piece Case Prep Tool Set in stock for $51.30 (Midsouth item 015-7810212).
March 24th, 2010
If you have a older version of QuickLOAD that won’t run on a Vista or Windows 7 computer, take heart, Neconos.com now has the updated version 3.6 of QuickLOAD. Version 3.6 is fully compatible with XP, Vista, and Windows 7, AND the latest update has an upgraded database with MORE powders, bullets, and cartridges. In addition, G7 Ballistic Coefficients are now supplied for many bullets in the database.
If you are currently running an older version of QuickLOAD on an XP machine, and you plan to upgrade to Windows 7, you should order the new QuickLOAD v. 3.6, with disk exchange. You will need to send in your CD so it can be “personalized” with your serial number. Ed Dillon of Neconos.com explains: “If you have 3.0, 3.1 or 3.2 and are planning on using a VISTA or Windows 7 machine you must install a new, compatible QuickLOAD disk. Send in your old CD and we will replace it with a Vista/Windows 7 compatible CD for $14.95 plus S & H.” (Note — this latest version 3.6 disk is also backwards compatible with Windows ME, 2000 and XP). Call Neconos at 800-451-3550, for instructions on how to send in your disk for the upgrade.
Data-only Upgrade Also offered
If you own a more recent version of QuickLOAD that already works with Vista, or if you plan to stick with XP, you can can order a data-only version 3.6 upgrade. That is the simplest way to get the enhanced databases, with new powders, bullets, and cartridges. If you have CD versions 3.0, 3.1, 3.2, 3.3, 3.4, or 3.5, you can purchase a new data update that adds new powders, cartridges, and bullets to your existing QuickLOAD program. For the data-only update, you do NOT need to send in your original installation CD, or uninstall the program. The data-only upgrade should simply update your QuickLOAD databases and you can keep running your program as usual.
Read our QuickLOAD Review to Learn More
The full QuickLOAD program costs $149.95, bundled with the QuickTarget ballistics program as a FREE extra. The latest version of QuickLOAD has comprehensive data for more than 1200 cartridges, 225 powders, and 2500 bullets. QuickLOAD is a remarkably powerful software program that will help you choose the most efficient powders for your cartridge. It can predict the effect (on pressure and velocity) of small changes in seating depth, barrel length, and even ambient temperature. Check out our detailed QuickLOAD Review to learn why this software is an invaluable tool for the serious reloader.
March 23rd, 2010
Redding Reloading Equipment has responded to the requirements of Indiana Deer Hunters with the addition of the 358/25 WSSM to their line of regular production “Custom Series” reloading dies. The following 358/25 WSSM dies are available: full-length sizing die, neck-sizing die, and a 3-die deluxe set including both full-length and neck-sizing dies plus a seating die with crimp.
This 358/25 WSSM wildcat cartridge has gained favor as an alternative to standard handgun calibers under Indiana’s hunting regulations, which allow the use of cartridges with a bullet diameter of .357″ or larger and a maximum case length of 1.625” during Indiana’s firearms deer season. The 358/25 WSSM can be used in both bolt action and modern sporting rifle styles. The round produces effective terminal ballistics on whitetail deer.
For more info or to order a current Redding catalog contact: Redding Reloading Equipment, 1089 Starr Road Cortland, NY 13045, or visit Redding-Reloading.com.
March 18th, 2010
 Sinclair International has released its latest print catalog, the 2010-A edition. The new catalog has grown to 204 pages with more than 11,000 products. The new catalog features hundreds of new products from Sinclair, Redding, Hornady, Barnes, Redfield, Leupold, Nosler, Lyman, Lapua and more.
Trained Tech Staffers Provide Reloading Help
Sinclair Int’l President Bill Gravatt revealed that: “Our tech staff are all certified, NRA Metallic Reloading Instructors who can help answer questions regarding reloading and shooting accuracy”. In addition to live assistance (via telephone), Sinclair offers many useful reloading tips via its Reloading Press Blog.
With the product shortages and rising prices of ammo following the 2008 elections, more gun owners than ever are reloading their ammo. Sinclair Int’l has expanded its inventory to better serve both first-time reloaders as well as “expert” hand-loaders. Serious shooters know that Sinclair Int’l is one of the best sources for high-end precision reloading gear. Gravatt agrees that “[Sinclair] has … the more specialized tools for more advanced reloading tasks.”
To order Sinclair’s new catalog, you can call 800-717-8211 or submit a catalog request online. CLICK HERE to request a catalog. NOTE: You can also download a digital version of the latest catalog for FREE.
CLICK HERE to DOWNLOAD Sinclair International 2010-A Catalog (204 page PDF file)
March 16th, 2010
MidwayUSA has cut the price on its Frankford Arsenal 6″ Electronic Calipers from $21.99 to just $12.99. This stainless steel caliper features a high-contrast LCD readout, and it comes with a fitted plastic case and 1.55 volt battery. With the touch of a button the tool switches from inch units to Metric units and back again. Claimed measuring accuracy (resolution) is +/- .001″.
We’ve used Frankford Arsenal calipers before. Though they won’t compare to a Mitutoyo, they are adequate for many basic reloading tasks. You can use these as a backup tool carried in your range bag or vehicle glovebox. The $12.99 price (good through March 31, 2010) is the lowest we’ve seen from MidwayUSA in a long time. Unlike some of the no-name electronic calipers sold on eBay or at Harbor Freight, the $12.99 Frankford Arsenal caliper are CE Certified and carry a one-year warranty against manufacturing defects.
March 15th, 2010
We have a “Palma/Tactical” project gun in the works built with an Eliseo chassis, Borden action, and one of Krieger’s very first 5R barrels. Initial load testing with Hodgdon Varget showed excellent accuracy potential, but we weren’t achieving the velocity we hoped to get from the 30″ medium-Palma-contour barrel. With Lapua brass and Varget we ran short of case capacity when seating bullets to mag-length, and the best accuracy came at about 2860 fps, well under competitive Palma velocities.
Mark LaFevers with .308 Win Eliseo Tubegun on SEB NEO front coaxial rest. Mark made the wood front bag-rider.
Chris Hodgdon kindly shipped us some H4895 and some of the new IMR 8208 XBR powder, lot #1022510-4798. In beautiful 70° conditions yesterday, we did a quick pressure work-up with both powders to determine “practical max” loads with the Berger 155.5gr Fullbore bullets (#30416). The 155.5s were loaded in once-fired Lapua brass with CCI BR2 primers, to a COAL of 2.860″, which is about .010″ short of land contact.
Varget-beating Speeds from Both IMR 8208 XBR and H4895
We loaded up two rounds at each charge weight, starting with the Hodgdon’s recommended starter load for a 155gr Sierra HPBT, as found in Hodgdon’s online Reloading Data Center. (There was no load listed for the 155.5gr Berger). It’s good that we started low because we saw immediately that both the 8208 XBR and the H4895 were yielding much more velocity, grain for grain, than Varget. Though we were not shooting for groups, the 8208 XBR also seemed to have a very large accuracy load window. Moreover, the velocity spreads for each two-round 8208 charge (above 43.0 grains) were remarkably low — none were more than 6 fps, and the velocities on our two 44.0-grain shots were exactly the same — 2992 fps. (This was NOT an error — the chron registered both shots #7 and #8.)
Of course, you can’t conclude much about ES/SD from just two shots, but the speed consistency in the 8208 was notable as you can see from the chart above. By contrast, each pair of H4895 shots varied in speed much more. For example, the two-shot ES for 43.0 grains of H4895 was 14 fps, while the two-shot 8208 XBR spread (for 43.0 grains) was 4 fps. It will be interesting to see if further testing confirms the low ES/SD potential of IMR 8208 XBR in the .308 Winchester.
We dispensed charges with an RCBS ChargeMaster calibrated and leveled on a granite bed. The 8208 XBR has smaller kernels than either Varget or H4895 and, as we expected, 8208 XBR dispensed very easily. The H4895, with longer kernels, dispensed fine in the ChargeMaster, but it took the machine more time to trickle the H4895.
As noted, we didn’t shoot for groups, but the IMR 8208 looked like it would shoot really well at anywhere from 43.0 to 44.0 grains. The H4895 proved accurate as well, at least in the high pressure ranges. We need to do 5-shot testing, over flags, before drawing any real conclusions. But right now we can say that, if you’re shooting a .308 with 150-155 grain bullets, you should definitely try the IMR 8208 XBR. It looks like a near-perfect match for the Palma-class bullets. The velocity is great, it appears the ES will be very low, and 8208 XBR packs more densely than Varget so you won’t have to run compressed loads.
Our most important discovery was that both 8208 XBR and H4895 offered significant velocity gains over Varget, at least in this rifle. It looks like 8208 XBR can run 2990 fps in this gun without pressure issues, while H4895 may top 3000 fps. Varget struggled to get much past 2900 fps.
IMPORTANT WARNING: The stated max load for IMR 8208 XBR with a Sierra 155gr HPBT was 45.3 grains, while the stated max load for H4895 (same bullet) was 46.0 grains. Note that, in this rifle, which has a tight 0.298″ Palma bore, we hit pressure limits well before reaching Hodgdon’s “book max.” Read that again carefully folks. Our 44.0 grain “practical max” for 8208 XBR was a FULL GRAIN less than the stated max load with a Sierra 155-grainer. Likewise we started getting stiff bolt lift at 44.3 grains of H4895 — a long way from the 46.0 grain stated max. So, the combination of a different bullet, and a tighter-than-normal bore made a significant difference in pressures. This is why, if you change ANY component in a load recipe you MUST start low for safety. And never assume that a factory “Max Load” is safe or “conservative”.
|
