Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









October 3rd, 2013

Prototype ‘Big Wheel’ Farley Co-Axial Rest for F-Open Competition

farley coaxial f-class f-open raton speedy gonzalezAt the F-Class Nationals in Raton, we saw a wide variety of front rests being used by F-Open shooters. One that caught our eye was a new prototype Farley Coaxial rest brought to the match by our friend Speedy Gonzalez. This one-of-a-kind Farley features a big wheel on the side for gross elevation adjustment, plus an extended locking arm. These two upgrades make the rest easier to use from the prone position. Up front is a new L-shaped Delrin forearm stop (Speedy say this would be black in the production version). Special large-diameter feet with extended “anchor shafts” complete the package. (See bottom photo.) Speedy used this rest at the Nationals and did very well, finishing second in the Master division, and in the top 15 overall among all Open-class shooters.

CLICK Photos Below to See Full-Screen Version.

farley coaxial f-class f-open raton speedy gonzalez

Speedy says the folks at Farley hope to market the Big Wheel Coaxial with these F-Class upgrades by the end of 2013. Some of the items should be available for purchase separately, as upgrades to current Farley rests. Sorry, no pricing is available at this time.

farley coaxial f-class f-open raton speedy gonzalez

The rest also sported a new Edgewood front bag with the new light-colored, super-slick bag material. Along with the new bag fabric, Speedy explained that there are subtle changes to the bag design and construction so that it holds its shape better and doesn’t “plump up” in the middle.

farley coaxial f-class f-open raton speedy gonzalez

farley coaxial f-class f-open raton speedy gonzalez

Permalink Gear Review, New Product 4 Comments »
October 3rd, 2013

Inaugural NRA National Defense Matches Kick Off in WV Soon

nra national defense matchesThere’s a new gun game focusing on defensive rifle skills — the NRA National Defense Matches (NDM). Think of this as IDPA with ARs. The inaugural NRA National Defense Matches will be held October 12-13, 2013 at Peacemaker National Training Center, in Gerrardstown, West Virginia.

NDM programs are designed for all skill levels, with the goal of developing and exercising defensive rifle skills. There are three types of NDM matches. First, the basic-level match allows novices to shoot from a variety of positions at relatively close ranges out to 100 yards. Competitors will engage targets from standing, kneeling, prone, and ‘roll-over’ prone positions (to simulate actual defensive situations). Next is the advanced-level NDM. This type of match is held on multiple bays with targets placed at seven to 50 yards. Shooters must move quickly from one firing point to the next. The championship-level, open-terrain NDM, calls for shooters to maneuver through undulating forested terrain, engaging targets from difficult firing positions, at distances out to 500 yards. All NDM matches are conducted according to established general parameters, but the actual courses of fire can be adapted to the features of particular ranges, to suit the terrain and range lay-out. Watch the video to see how NDM matches are conducted.

National Defense Match Demonstration Video (Warning: Very Loud — turn speakers down.)

Story tip by EdLongrange. We welcome reader submissions.
Permalink Competition, News Post comment »
October 3rd, 2013

Handy Wire Clip Secures Cartridge Box Lids

Here’s a handy invention by Forum member RayJay from Georgia. It’s a simple wire clip that will hold the lid of your plastic ammo box fully open during use. RayJay explains: “Everybody probably uses the cheap plastic cartridge cases. The only problem I have with them is the lid is always in the way and sometimes when trying to open the lid farther the cartridge box tips and you can dump out the cases. I did some cogitating and came up with these .061″ music wire clips. They work great and the unexpected benefit is that the cases are more stable while sitting at the bench.”

RayJay adds: “The round wire is ideal because it still allows a cartridge to fit in the hole where the clip is placed. Now all I need to do is make another 15 or 20 so I can have one in every case I own.”

Cartridge Box Lid Holder

Permalink Reloading 11 Comments »
October 2nd, 2013

Get a $300.00 Kelbly’s Credit When You Buy a March Scope

kelbly.com kelbly's march scope scale $300 credit promoThe good folks at Kelbly’s have announced a great October sales promotion. If you buy a March scope — any March scope in stock — you’ll earn a $300.00 credit that can be used to purchase any other products Kelbly’s sells. That includes rings, reloading gear, bullets, and many more items you’ll find at www.Kelbly.com.

Jim Kelbly explains how this works:

“For the month of October only, buy a March Scope in stock and get $300.00 of credit towards Kelbly’s products and the Kelbly’s store. Kelbly’s now carries a number of reloading products and bullets. The credit can be used same day as scope purchase to get scope rings or anything else we sell. This sale is for any March Scope in stock. With over 150 scopes in stock there is a great selection of scopes. If you would like to see a inventory of scopes just email us and we will send [that] to you. If you have any questions just email or call. NOTE: Scopes will only be sold to U.S. citizens and shipped to U.S. addresses.”

For more information, email jim[at]kelbly.com or call (330) 683-4674 and ask about the October Promo.

kelbly.com kelbly's march scope scale $300 credit promo

Permalink Hot Deals, Optics Post comment »
October 2nd, 2013

Lothar Walther Bi-Metal Barrels Are Lighter, and Shed Heat Better

Less weight plus better heat dissipation — Sound good? Here is an innovative barrel technology that promises worthwhile performance benefits for hunters or match shooters. Lothar Walther (LW) has developed a new bi-metal barrel system that cuts weight dramatically while promising significantly-enhanced heat dissipation.

Walther’s Ultra-Lightweight Barrels combine steel with lightweight alloys. This results in a significant weight reduction without the use of carbon fiber, epoxy binders, or other heat-retaining materials. Beginning as an LW50 stainless blank, the barrel is precision-machined to remove excess weight. An outer casing of light-weight alloys is machined and the two are fitted together without adhesives. Basically you end up with the steel inner barrel inside a larger-diameter fluted aluminum outer barrel (see diagram). This gives you the ‘best of both worlds’ — light weight for ease of carry, and thick diameter for rigidity and enhanced heat dissipation. Near the action, the barrel remains all-steel.

The barrels come pre-chambered in your choice of caliber/cartridge, from .22LR up to .338 Lapua Magnum. Walther chambers the barrel — but a gunsmith is still required to finish the shoulder so that the headspace is set correctly for your action. These barrels are not inexpensive. A typical bi-metal Walther Barrel runs $850.00 – $875.00, for barrel lengths from 22″ to 30″. Threading for a muzzle brake or suppressor (if desired) is normally included in that price.

Lothar Walther ultra lightweight bi-metal barrel

Aluminum thermal conductivityWe haven’t tested one of these bi-metal composite barrels, but the potential for significant weight savings is obvious — aluminum is a lot lighter than steel. What’s more, a metals expert we contacted said that a bi-metal system employing fluted aluminum over steel, if assembled properly, could dissipate heat much better than steel alone (given the same diameter). Stainless steel has a thermal conductivity factor of 16. Aluminum has a thermal conductivity factor of 250.*

Our expert also pointed out that some other composite barrel systems on the market actually increase heat retention because they place insulating materials next to the inner steel barrel. (Carbon, Fiberglass, and Epoxy are all considered “insulating substances” as they have very low thermal conductivity*.) The LW system of aluminum over metal should avoid this mistake, our expert believes. Lothar Walther says: “Unlike solid steel barrels, this barrel sheds heat fast. VERY FAST!”

Half the Weight of Conventional Barrels
How much weight can you save? With a 1.200″ shank diameter and a muzzle diameter of 0.850″, the LW Ultra-Lightweight Barrel is less than half the weight of a standard varmint barrel of the same size. Walther claims its UltraLight Barrel can be “carried for long distances and stand up to heavy firing.” This, LW says, makes these barrels “perfect… for varmint and tactical uses”.

Pre-Chambered Ultra-Lightweight Barrels Available in .22 to .338 Calibers
Lothar Walther offers Ultra-Lightweight barrels in a full range of calibers from .22LR to .338. Each Ultra-Lightweight Barrel comes complete with chamber, crown, and breech threads. These barrels are fluted by the factory. If you order a LW Ultra-Lightweight barrel, Lothar Walter provides the services of a specialist trained in building guns with these barrels. To order one of Lothar Walther’s bi-metal barrels, CLICK HERE or contact Lothar Walthar at the address below:

Lothar Walther Precision Tools, Inc.
3425 Hutchinson Rd. – Cumming, GA 30040
Phone: 770-889-9998 | Fax: 770-889-4919
E-Mail: lotharwalther [at] mindspring.com
Website: www.lothar-walther.com

*Thermal conductivity is the quantity of heat transmitted through a unit thickness in a direction normal to a surface of unit area, due to a unit temperature gradient under steady state conditions. The factor values are based on this formula: W/(m.K) = 0.85984 kcal/(hr.m. °C). Here are thermal conductivty values for common materials: Aluminum, 250; Brass, 109; Steel (Carbon 1%), 45; Stainless Steel, 16; Carbon, 1.7; Brick dense, 1.3; Concrete (medium) 0.7; Epoxy, 0.35; Fiberglass, .04.

Story tip from EdLongRange. We welcome reader submissions.
Permalink Gunsmithing, New Product 6 Comments »
October 2nd, 2013

Hornady Auto Charge Powder Dispenser On Sale for $184.46

hornady lnl auto charge powder dispenser amazon.comHere’s a great deal on an electronic powder dispenser/scale unit. Amazon.com now has the Hornady Lock N Load Auto Charge on Sale for just $184.46. That’s a real bargain — these dispensers sell for as much as $250.00 elsewhere.

And here’s another good deal on Hornady’s Auto Charge if you need a range bag as well. Grafs.com is currently offering the Hornady Lock-N-Load Auto Charge powder scale/dispenser for $209.99. To make the deal even sweeter, Grafs.com will include a medium-size range bag for FREE. Hornady says the range bag is worth $34.99, making your effective cost for the Auto Charge around $175.00. CLICK HERE for Dispenser/Range Bag Combo.

While we have a lot of positive experience with the RCBS Chargemaster, we haven’t done any long-term testing of the Hornady AutoCharge. However, user reviews have generally been positive. We suggest you do your own research and then make your own decision. Both the Hornady LnL AutoCharge and RCBS ChargeMaster offer load precision to ±0.1 grains. Both the Hornady Autocharge and the RCBS ChargeMaster are sold with a one-year manufacturers warranty.

Features and Specifications:
  • Scale capacity of 1000 grains
  • Easy-to-operate keypad
  • Large backlit display
  • Automatic and manual dispense options
  • Trickle function
  • Three speed settings
  • Easy Outflow Powder Drain
  • Overcharge protection
  • One-year manufactuer’s warranty

This Youtube video shows the Hornady Lock-N-Load AutoCharge in action.

Permalink Hot Deals, Reloading Post comment »
October 1st, 2013

Survival Tube Offers Fire-Starter, Knife-Sharpener, and Paracord

survival tool tube fire-starter striker fireHunting season is here. That means many of you will be heading off into the woods. Along with your rifle and ammo, it’s wise to carry some basic survival gear on your hunt. The NRA has just introduced a cleverly-designed multi-function Survival Tube that fits in a pocket.

This new product combines a fire-starter with a knife sharpener. The NRA Survival Tube’s magnesium fire starter and steel striker can produce sparks in the wettest and windiest conditions. The easy-to-use, diamond-encrusted knife sharpener keeps hunting blades sharp. No one wants a dull knife on a hunting or camping trip. The Survival Tube is wrapped with six feet of 550 paracord, and the lanyard gives you another 31 inches of paracord. The NRA Survival Tube stows easily, or it can be hooked to a backpack loop. Price for this useful product is $19.95 at the NRA Store. That’s not bad, but remember that a $0.99 disposable lighter will start fires just fine in most conditions.

survival tool tube fire-starter striker fire

Permalink Gear Review, New Product Post comment »
October 1st, 2013

Tipton Cleaning Rod Wall Racks for Under $10.00

Here’s a handy, affordable product that will help you organize gear in your reloading room or “man cave”. Tipton’s new Cleaning Rod Rack (Tipton #100335) can accommodate up to six rods with various size handles. The wall-mounted Rod Rack also has horizontal studs on either end for additional accessories. These are useful for hanging the Tico Tool shotgun cleaning wands that stow in a tube with a plastic hook on the top.

Tipton Cleaning Rod Racks come complete with mounting screws (and screw slots are molded-in). You’ll find Tipton Cleaning Rod racks for under $10.00 at most vendors. They are $7.99 at Cabelas.com, while Amazon.com offers the racks for just $7.99 with free shipping for Amazon Prime Members.

Tipton Cleaning Rod Rack 100335

Tipton Cleaning Rod Rack 100335

Permalink New Product, Reloading Post comment »
October 1st, 2013

Smart Way to Neck-Down 6.5×47 Lapua Cases to 6mm

Redding 6BR body dieThe 6.5×47 Lapua necked down to 6mm is a popular wildcat. However, we’ve learned that, when necking down a 6.5×47 Lapua case to 6mm, simply running the brass into a 6-6.5×47 full-length sizer won’t give the best results. Reader “Fireball”, who has worked with both a 6-6.5×47 and a 22-6.5×47, offers this tip: “You don’t want to bring the 6.5mm case all the way down to 6mm in one step — it’s too big of a jump. First, to smooth entry, run a 6.5mm expander in the case mouth, and chamfer the outside of the case mouth — be sure to remove all burrs. Apply some lube to the neck. Then, if you have a .257 bushing, put that in a 6BR bushing neck die, and run the case up [for initial reduction].” Then, use your 6mm die for the final step.

Alternatively, you can use a Redding 6BR body die initially. The body die will funnel the neck down about half way. Body dies are pretty inexpensive ($29.99 at Grafs.com, Item #RED75317). After running the brass through the 6BR body die, then you can run the case into the Forster 6-6.5×47 Full-length sizing die. The Forster die is excellent — it sizes a no-turn neck just about perfectly, so long as you do an intermediate step first.”

Permalink Bullets, Brass, Ammo, Reloading 4 Comments »
September 30th, 2013

New CMP Custom Shop Will Repair and Upgrade USGI Rifles

CMP Custom Shop Civilian Marksmanship ProgramOver the years, many Civilian Marksmanship Program firearms purchasers have asked if the CMP would consider offering reliable, reasonably-priced and prompt maintenance, repair and upgrade of USGI-issue rifles. The CMP has responded and the answer is “YES”.

Starting October 1, 2013, the CMP Custom Shop (Anniston, AL) opens for business, providing a wide variety of repair, upgrade and custom services for a wide range of U.S. Military rifles, specifically those issued in early eras. As well as regular repairs (and troubleshooting), the CMP Custom Shop will be able to perform virtually any normal upgrading, accurizing, customizing, and refinishing for the types of rifles the CMP sells.

CMP will work on the M1 Garand, M1 Carbine, 1903 and 1903A3 Springfield, the 1917 Enfield and the Krag. Other rifles like the Remington 40X, Mossberg 44, and H&R Model 12 can also be serviced. CMP will NOT work on shotguns, pistols, revolvers, M14/M1A, AR15-style rifles or other commercially-produced modern rifles. For a list of services (with prices) visit the CMP Custom Shop webpage.

cmp custom shop USGI rifle repairs

NOTE: Before you can send a rifle to the CMP Custom Shop you must be a customer on file in the CMP system. Customers must meet the same eligibility requirements as for CMP rifle purchases. Once qualified, you can purchase a rifle from the CMP and have the CMP Custom Shop make modifications to it prior to shipping.

CMP Custom Shop Can Work on USGI Rifles Purchased from Other Sources
The CMP Custom Shop can work on rifles that may have been purchased elsewhere as long as they were made by a USGI contractor. Some examples include: Springfield Armory (not Springfield Inc.), Harrington & Richardson, Winchester, International Harvester, Remington, Rock Island, Eddystone, Inland, Underwood, Rock-Ola, Quality Hardware, National Postal meter, Standard Products, IBM, Irwin-Pederson and Saginaw. NOTE: There are many NON-USGI copies of the M1 Garand, 1903 Springfield and especially the M1 Carbine that CMP will be unable to work on.

CMP Custom Shop Garand 1903 repair

CMP Custom Shop Garand 1903 repairFor more information, call (256) 835-8455, x1113, or send email to customshop [at] thecmp.org. Shipping and Correspondence address for the CMP Custom Shop is:

CMP Custom Shop
1803 Coleman Rd
Anniston, AL 36207

Permalink Competition, Gunsmithing, News 3 Comments »