The NRA Annual Meeting & Exhibits in St. Louis opens tomorrow morning, April 13th. (Hopefully a Friday the 13th launch won’t bring bad luck). However, doors opened at 2:00 pm CST for advanced registration, and some of the outer exhibits will be available for viewing this afternoon. The NRA Foundation’s Banquet and Auction starts at five this evening.
When the “main event” kicks off tomorrow, there will be plenty to see and do. In addition to the many seminars for NRA members, you can view more than 500 exhibits, filling 340,000 square feet of floor space. Virtually all the major gunmakers in the country should have their latest products on display. You’ll even find an airgun range on site where you can shoot air rifles provided by Pyramyd Air.
Photo provided by the NRA Blog, Lars Dalseide editor.
Stocky’s Stocks has released a new laminated MBR Tooley-style long-range benchrest stock at an affordable price. Dubbed the Bobby Hart’s Ideal Benchrest Stock (IBS), this stock comes inletted for Rem 700 and Rem clone short actions or long actions.
The basic version of Stocky’s Ideal Benchrest Stock sells for just $499.00 including Pachmayer recoil pad installed. For $100 more ($599.00 total), you can get the stock with a CNC-machined 6061-T6 aluminum “Accublock” bedding block installed in the stock. Stock’s new IBS stock features a 1.25″ barrel channel, 3″-wide fore-end and weighs 4.8 pounds total.
Stock Geometry — Flat Front with Slight Drop in Rear
Note that the underside of the buttstock is NOT parallel with the fore-end. The buttstock has a bit of drop to improve tracking on recoil and to allow elevation “fine-tuning” by sliding the stock fore and aft. While some shooters will prefer parallel geometry, Dave Tooley’s original design did feature a bit of drop in the buttstock. Dave believes this helps the gun recoil more smoothly, without bouncing on the bags. Of course, a few minutes spent with a wood rasp, sandpaper, and a level can remove the slight angle in the underside of the buttstock, if you prefer parallel geometry. These Stocky’s IBS stocks are available in 14 different laminated colors, in either satin or laminated finish. A half-dozen of our favorite laminated patterns are shown below.
Product tip from Boyd Allen. We welcome reader submissions.
After we ran our Bulletin news item about Ron Boyd’s amazing 1.462″ 5-shot group at 1000 yards, many readers wanted to see some close-up photos of Ron’s rig. Thanks to Robert Ross of the MidWest Benchrest Club, we have some photos of Ron with his ultra-accurate 6mm Dasher 17-lb Light Gun. This rifle features a BAT SV action, Precision Rifle & Tool (PR&T) “Hammerhead stock” with 5″-wide front wings, Nightforce 12-42 Benchrest scope, and Jewell trigger. Ron had just added a 30″ 1:8″-twist Bartlein barrel to the gun before shooting the 1.462″ group. That barrel only had about 40 rounds through it when it produced the near-record group. The barrel in photos below was a 28″ Benchmark, recently replaced with the new Bartlein. Ron’s ultra-accurate 6 Dasher load consists of surplus Long Range Match powder, with Spencer 103gr bullets. Ron also anneals his Dasher brass after every firing.
CLICK Small gallery photos to view full-size images
Henry Pasquet’s .284 Win Heavy Gun
At the same Midwest Benchrest Club IBS match where Ron shot his small five-shot group, Henry Pasquet drilled a very impressive 3.348″ ten-shot group. This group was just .304″ off the IBS 10-shot Heavy Gun record of 3.044″ shot by Joel Pendergraft in 2009. We are told that Henry was running a straight .284 Winchester. You can see in the inset photos below that Henry uses a tuner on his barrel. He also has fitted an extra-wide front sled and a machined rear “keel” to reduce torque and improve tracking. Henry can adjust windage and elevation with BOTH his Fulghum front rest (from Randolph Machine) and his adjustable rear rest.
CLICK Small gallery photos to view full-size images
You have to love a gun company CEO who actually gets behind the trigger. In this “behind the scenes” video made during the filming of a Savage Arms commercial in Utah, Team Savage Captain Stan Pate guides Savage CEO Ron Coburn in the use of the Savage Palma rifle chambered in .308 Winchester. Despite the somewhat wobbly shooting platform, Ron successfully hits targets at 1200 yards. Ron comes away smiling, as do members of the film crew who get “trigger time” at the end of the video.
The video has a very positive vibe and does a great job illustrating why it’s fun to shoot accurate rifles at long range. Hat’s off to Savage for putting its CEO behind the trigger. We love Stan Pate’s closing line. With a big grin, he says that the Savage rifle’s accuracy makes long-range shooting “So easy — even the Boss can do it“.
Eurooptics.com now carries the impressive Vectronix Terrapin Laser Rangefinder. The $1995.00 Terrapin is a high-grade, milspec device rated to 2400m, well beyond the stated ranges for LRFs in the $600-$1000 class. Field reports indicated that the Terrapin is very good. One field tester, using a Terrapin set on a tripod, said the Terrapin hit 16″ plates at 800 yards more reliably than a Swarovski Laserguide. Ranging a small object like that at 800 yards is a tough test for any LRF. The Terrapin performs well on smaller objects because it has extremely tight beam divergence (this means the beam doesn’t spread out like a wide cone at long range).
The reports we’ve received indicate that the Vectronix lives up to expectations created by its 2400m distance rating. Jason Baney reports: “This Vectronics is impressive. In the right conditions, these units can range well beyond 2000 yards. On a Snipers’ Hide Thread, Vectronix Terrapin owners have reported ranging successfully past 3000 yards on large objects.” Available in tan or green, the Terrapin has a rugged aluminum inner housing and is rated to be waterproof with 60 minutes of immersion. It is easy to hold, and weighs just 1.1 pounds. Efficient electronics allow the Terrapin to make over 7,000 ranging “shots” before the two CR123 batteries need to be replaced.
Now competing with major sponsorship from Taurus firearms, Jessie Duff (formerly Jessie Harrison) thoroughly dominated the ladies’ division of the recent U.S. Steel Challenge Nationals in Florida, winning the Steel Master title. It seems like you can put any makers’ firearm in Jessie’s capable hands, and she comes out a winner.
Jessie defended her 2011 titles in Ladies Limited, Open and Steel Master, making this her 6th year in a row to win the Ladies Steel Master title. “Competing for Steel Master is a lot more difficult than you would think,” Duff says. “You have to be just as proficient with all three guns, as someone would be with one. A lot of time goes into training for it, and thankfully it paid off this weekend!”
At the U.S. Steel Challenge Nationals, Jessie competed in three divisions: .22 Optic Rimfire, Limited, and Open. All three divisions qualify her for the Steel Master title, an Aggregate score of all three divisions. After the match Jessie commented, “This match was the first match of the year for me, and I wanted to kick the season off with a victory, especially with my new relationship with Taurus. I was very proud to come home with three national titles!” Mark Kresser, President and CEO of Taurus USA comments, “We are very pleased with Jessie’s performance. Jessie is … taking Taurus to a new level and breaking open the door of the competition world.”
Six decades after the introduction of the M16, Colt has added a gas piston system to the venerable AR15. Colt put a gas piston in this new AR-platform rifle in order to improve reliability and reduce fouling. The new gas-piston Colt AR, designated the LE6940P, will be sold to both civilians and law enforcement agencies. In selling a gas-piston AR, Colt is following the lead of Heckler & Koch (HK 416) and other manufacturers who have found a market among buyers seeking a lower-maintenance AR with significantly less internal powder fouling than the original direct-gas-impingement AR design.
Colt’s product press release declares: “Colt Defense LLC … has advanced its one-piece monolithic upper receiver to introduce the LE6940P. This modular carbine has an articulating link piston (ALP) operating system and offers shooters a highly accurate, lightweight and easy-to-clean AR-platform rifle with an extended lifespan. The advanced piston carbine (APC) is a lightweight, highly accurate alternative to the traditional direct gas impingement system found in most ARs. The LE6940P utilizes a unique articulating link piston (ALP) operating system, which reduces inherent stress in the piston stroke by allowing for deflection and thermal expansion. As a result, shooters are offered a highly accurate firing experience and the weapon’s lifespan is extended.”
Piston Design Developed for U.S. Military “The new LE6940P puts to use a new, improved version of a piston system that Colt originally pioneered for the U.S. Army,” said David Ridley, Vice President of Colt Defense LLC. Ridley added: “Colt was the first to put a piston system in an AR, and we have continued to improve on that system since. Now, any civilian shooter or law enforcement professional has the opportunity to shoot using this superior piston-operated AR.”
Monolithic Upper with Extended Rail
The LE6940P weighs just over 6.5 pounds, and measures 35 inches with stock extended. The rifle is chambered in .223 Rem (5.56×45 NATO) and uses standard AR15 magazines. Colt delivers the LE6940P with a full-length rail running from the rear of the upper receiver to the front sight. This allows many mounting options for sights and accessories. Colt has also includes a back-up iron sight (BUIS) and a folding front sight. The lower receiver is marked “Piston Carbine” and comes with a Colt/Rogers Super-Stoc M4 H-buffer stock kit with cam-lock lever, push-button QD swivel, and accessory kit. The standard barrel is a 16.5″-long M4-type contour with flash-hider. CLICK HERE for large photos of the internals, plus close-ups of the folding sights.
Here’s a interesting new ammo option for air rifle shooters. Gamo Outdoor USA has introduced new Bone Collector® lead pellets featuring dome tips and grooved skirts. Gamo claims that the rounded nose and grooved skirt makes these pellets more aerodynamic (with a higher ballistic coefficient), so they retain more energy at longer distances. That’s good news for Airgun varmint hunters. The .177 pellet weighs 7.56 grains while the larger .22-caliber version weighs 15.43 grains. Gamo claims that the high weight-to-caliber ratio and higher BC gives Bone Collector® pellets “more terminal penetration than standard lead pellets” and a stable flight trajectory. MSRP is $8.95 per tin (150 pellets/tin in .177 and 100 pellets/tin in .22). Whether the Bone Collector pellets really live up to the marketing hype remains to be seen, but it’s still good to see some new offerings among pellet-makers.
Nothing New Under the Sun?
While Gamo is claiming that its domed and skirted pellet design is an innovative new aerodynamic design, sharp-eyed Bulletin reader Julio from the UK points out the the Gamo Bone Collector is a dead-ringer for the RWS Superdome pellet, which has been available for quite some time. Check out the photos and you’ll see the similarity.
The RWS Superdome is available in three sizes: .177, .22, and .25. The Gamo Bone Collector pellets are a bit heavier in .22 caliber: Gamo’s .22-cal Bone Collector is 15.43 grains compared to 14.5 for the .22-cal Superdome. But the RWS .177-cal Superdome is 8.3 grains compared to 7.56 grains for the bone Collector. And Gamo has nothing to match the jumbo 31.0 grain .25-caliber Superdome.
In this NSSF Video, Ryan Cleckner, a former Sniper Instructor for the 1st Ranger Battalion, defines the term “MilliRadian” (Milrad) and explains how you can use a mildot-type scope to range the distance to your target. It’s pretty simple, once you understand the angular subtension for the reticle stadia dots/lines. Cleckner also explains how you can use the milrad-based reticle markings in your scope for elevation hold-overs and windage hold-offs.
Even if you normally shoot at known distances, the hold-off capability of milrad-reticle scopes can help you shoot more accurately in rapidly-changing wind conditions. And, when you must engage multiple targets quickly, you can use the reticle’s mil markings to move quickly from one target distance to another without having to spin your elevation turrets up and down.
GOOD RESOURCE: If you want to learn more about using Milliradians and Mildot scopes, we suggest the excellent article The Truth about Mil Dots by Michael Haugen. This article explains, in considerable detail, the use of U.S. Army and U.S.M.C. Mildot scopes. Haugen begins with basic definitions: 1 radian = 2 PI; 1 Milliradian (Milrad or ‘Mil’) = 1/1000th of a radian; 1 Milliradian = .0573 degrees.
Forum member Ed L. (aka itchyTF) owns one of the beautifully-crafted SEB NEO front joystick rests. These units are in short supply — creator Seb Lambang can’t keep up with demand. Anyone lucky enough to own a SEB NEO would naturally would want to keep it in perfect condition, and Ed is no exception. Ed put together a system to cradle and protect his SEB NEO during transport and storage. Ed tells us: “I decided to give my NEO its own home. I only wanted to remove the leg before storage so I decided on an empty Pelican Storm IM2450 case and added my own foam. This IM2450 case is a little wider than it needs to be, but I couldn’t find anything closer and still fit the other dimensions. The blue and white foam is more rigid than the typical gray foam. The Allen wrenches are placed in the rear piece of white foam.”
Ed found the Pelican Storm IM2450 case on the internet for $103 with free shipping. This same case is sold as the Hardigg IM2450 Storm Case. All-up weight, with the SEB NEO rest in the case, is 32 pounds. CLICK Thumbnails below to view larger images.
The basic version of Stocky’s Ideal Benchrest Stock sells for just $499.00 including Pachmayer recoil pad installed. For $100 more ($599.00 total), you can get the stock with a CNC-machined 6061-T6 aluminum “Accublock” bedding block installed in the stock. Stock’s new IBS stock features a 1.25″ barrel channel, 3″-wide fore-end and weighs 4.8 pounds total.
Now competing with major sponsorship from Taurus firearms, Jessie Duff (formerly Jessie Harrison) thoroughly dominated the ladies’ division of the recent U.S. Steel Challenge Nationals in Florida, winning the Steel Master title. It seems like you can put any makers’ firearm in Jessie’s capable hands, and she comes out a winner.
“The new LE6940P puts to use a new, improved version of a piston system that Colt originally pioneered for the U.S. Army,” said David Ridley, Vice President of Colt Defense LLC. Ridley added: “Colt was the first to put a piston system in an AR, and we have continued to improve on that system since. Now, any civilian shooter or law enforcement professional has the opportunity to shoot using this superior piston-operated AR.”
Nothing New Under the Sun?
In this NSSF Video, Ryan Cleckner, a former Sniper Instructor for the 1st Ranger Battalion, defines the term “MilliRadian” (Milrad) and explains how you can use a mildot-type scope to range the distance to your target. It’s pretty simple, once you understand the angular subtension for the reticle stadia dots/lines. Cleckner also explains how you can use the milrad-based reticle markings in your scope for elevation hold-overs and windage hold-offs.
Forum member Ed L. (aka itchyTF) owns one of the beautifully-crafted SEB NEO front joystick rests. These units are in short supply — creator Seb Lambang can’t keep up with demand. Anyone lucky enough to own a SEB NEO would naturally would want to keep it in perfect condition, and Ed is no exception. Ed put together a system to cradle and protect his SEB NEO during transport and storage. Ed tells us: “I decided to give my NEO its own home. I only wanted to remove the leg before storage so I decided on an empty Pelican Storm IM2450 case and added my own foam. This IM2450 case is a little wider than it needs to be, but I couldn’t find anything closer and still fit the other dimensions. The blue and white foam is more rigid than the typical gray foam. The Allen wrenches are placed in the rear piece of white foam.”
