Based on their showings in 10m Air Rifle Olympic trials, four athletes have been nominated to the U.S. Olympic Team. The Men’s 10m Air Rifle nominees are two-time Olympic medalist Matt Emmons and 2011 Pan American Games silver medalist Jonathan Hall. The two women nominated to the U.S. Olympic Team are Sarah Scherer and 2008 Olympian Jamie Gray. Olympic Team selection was based on the aggregate of four courses of fire and two best finals. All athletes nominated to the 2012 U.S. Olympic Team must now be approved by the U.S. Olympic Committee.
Matt Emmons, already nominated for Men’s 50m Rifle Three Position, led the selection with a total of 2587.7 points. Matt note: “I’m happy to earn another nomination to the team and shoot another event at the Olympics. At the same time, I know the scores that I shot throughout Trials are not going to be competitive at the Games and I know what I need to do to get there.” Close behind Emmons, Jon Hall finished the 2012 Trials with 2586.7 total points. Hall, a senior at Columbus State University in Georgia, finished third in the 2008 U.S. Olympic Airgun Trials, barely missing the team in 2008. Hall said that making the 2012 Olympics team is “a relief and an exciting moment — I’ve been working towards this my whole life.”
In Women’s 10m Air Rifle, 21-year-old Sarah Scherer and 2008 Olympian Jamie Gray received nominations to the 2012 U.S. Olympic Team. Scherer is now the second member of her family to earn an Olympic berth. Scherer’s brother, Stephen, was a member of the 2008 Team, and passed away in 2011. “Honestly, thank you Lord. Without him I could not have made it through this match,” said Scherer who battled a severe head cold throughout the weekend. “The only thing that I had left in my shooting that was still me was my focus and concentration. I couldn’t hear or see as well as normal and my heart rate was all over the place. I’m just so thankful that I made it through.”
Gray, already nominated to the 2012 U.S. Olympic Team for Women’s 50m 3P Rifle, is “looking forward to shooting two events [in London].” Jamie, the wife of USAMU SSG Hank Gray, will continue her training at the USAMU’s ranges in Fort Benning, GA, as well as the U.S. Olympic Training Center in Colorado.
Airgun Course of Fire Explained
In airgun competition, male and female competitors shoot 60 and 40 shots respectively during a single course of fire at electronic targets 10m (32.8 feet) down range. The maximum number of points available is 600 for men and 400 points for women with 10 being the highest score possible per shot. Athletes qualify for the finals by placing in the top eight after an aggregate match score. The final for both events consists of ten shots. The scoring in the finals is unique because decimals are counted, so the maximum number of points a competitor can earn is 109 points with 10.9 being the highest score possible per shot.
In related news, two 10m air pistol shooters secured Team nominations at the Olympic Trials held at Port Clinton, Ohio this past weekend. Now set to compete with Team USA are three-time Olympian SFC Daryl Szarenski, and 2008 Olympic bronze medalist Jason Turner. SFC Szarenski is the 2011 Pan-American Games Men’s 10m Air Pistol gold medalist. Daryl came into the weekend with an 18-point advantage over his nearest competitor and finished atop the standings with 2537.4 total points.
If you’re looking for a solid, beautifully fabricated loading press that can do double-duty at home AND at the range, consider the Combo Press from Harrell’s Precision, run by brothers Lynwood and Walter Harrell. Though it is very compact, it has plenty of leverage to full-length-size cases. The Harrell’s Combo Press works BOTH as an arbor press and as a standard press that functions with shell-holder and conventional screw-in dies. The arbor section on the left is tall enough to hold a Wilson micrometer-top seater. The threaded die section on the right has enough clearance for .308-sized cases.
One of the best features of the Combo Press from Harrell’s Precision is its sturdy clamp. This mounts solidly to a wood loading bench or table top. It also has enough vertical clearance between the jaws to work with most range benches. Forum member Boyd Allen has written a detailed review of the Harrell’s press, with additional photos by Paal Erik Jensen of Norway. The Harrell’s Precision Combo press retails for $295.00. That’s pretty pricey, but consider that it can replace BOTH an arbor press and a standard press. CLICK HERE to read full COMBO PRESS REVIEW
Combo Press Has Plenty of Power to Bump Shoulders
This Editor has loaded ammo with this press and I can say it performed well. It actually bumped shoulders on fired 6BR brass more easily than a larger cast-iron press we have in our loading area. I attribute that to the fact that the threads for the die are very precise and the shell-holder seats firmly on the ram, with no slip. Seating with a hand die (on the left side of the press) yields repeatable results, although I have to say I get better “feel” with a good Arbor press, such as those made by 21st Century, K&M, or Sinclair Int’l. I also like the availability of the seating Force Gauge on the K&M Arbor.
David Tubb’s impressive 2-disc DVD, “The Art & Technique of the Modern Match Rifle”, is a great resource for any position shooter. This 2-disc DVD provides over 4.5 hours of instruction and shooting demonstrations. We’ve watched the entire video and can assure you that it is excellent. Novice High Power and prone shooters who apply David’s methods should definitely improve their scores.
David has included highlights from that DVD in a shorter promo video. While the shorter video is a sales tool, it’s very informative in its own right. Watch the video and you’ll learn a great deal just by watching how David shoulders his rifle, and how he adjusts and maintains his shooting position. David shows examples of prone, sitting, and standing positions. In the short “trailer”, David also provides helpful tips on adjusting sights, and placing the spotting scope.
If you shoot Service Rifle, High Power, or prone, you can benefit from watching this short sampler video embedded above. The full 2-disc DVD is available for $49.95 from Creedmoor Sports or DavidTubb.com. With over 4.5 hours of content, the DVD covers all the across-the-course positions, the set-up and use of aperture sights and diopters, High Power and long range targets, the approach method in offhand, proper placement and use of spotting scopes. The DVD includes bonus footage of David shooting strings in all of the across-the-course positions. (NOTE: Creedmoor Sports is running a February DVD Special for a few more days — Buy two (2) DVDs and get a third for 10% off.)
$24.95 DVD Shows How to Set-Up and Maintain Tubb 2000 Rifle
If you want a High Power match rifle that works brilliantly for all positions, definitely consider the Tubb 2000, aka the T2K. Yes it’s very expensive, but since the year 2000, when the T2K was introduced, this design has won more High Power National Championships than any other bolt-action rifle. The video below showcases features of the T2K that allow it to perform so well in all High Power disciplines. With the T2K’s inline, low-profile action, the shooter can cycle the bolt without raising his head off the stock. That’s a huge benefit for the competitor, particularly in rapid-fire stage. Other tubeguns, such those built on Eliseo (CSS) chassis kits, share this quality, but the T2K also has an extremely easy-to-manipulate bolt (and a superb Anschütz trigger). Watch how quickly and easily David can cycle his T2K without upsetting his shooting position.
David has created an informative DVD about the Tubb 2000 rifle that shows how to assemble/disassemble the Tubb 2000 rifle, how to custom-fit the T2K to the shooter, and how to set up the adjustable buttstock for different shooting positions. This Tubb 2000 (T2K) DVD is available for $24.95 from DavidTubb.com.
Black Hills has announced three new types of loaded ammunition for 2012. (This is all-new factory ammo, not commercial reloads.) The first caliber is the .204 Ruger. The new round uses the 32gr Hornady V-Max™ projectile that has proven to be one of the most accurate and effective bullets available for use on varmints.
125gr and 220gr (subsonic) Options in .300 Whisper
The second is the .300 Whisper. This cartridge is the brainchild of JD Jones of SSK and has been around a long time as a proven wildcat cartridge. This versatile 30-caliber cartridge is designed primarily for use in M4/M16/AR-15 family of rifles and allows for use of a wide weight range of projectiles. Initial Black Hills loads for this cartridge are a 125 grain load that essentially duplicates 7.62×39 ballistics, but with far superior accuracy, plus a 220 grain Sierra MatchKing at subsonic velocity.
New 69gr SMK load in .223 Rem for AR15s
For use in AR15s with 1:9″ twist barrels, Black Hills’s customers have asked Black Hills to provide factory ammo loaded Sierra’s highly accurate 69gr MatchKing. In response to customer demand, for 2012 Black Hills will be offering the 69gr SMK loaded to 5.56mm pressures and velocities in military specification brass. In this new ammo, Black Hills has utilized modern temperature-stable, flash-suppressed propellant.
New Product Tip from EdLongrange. We welcome reader submissions.
Larry Racine is a respected gunsmith based in New Hampshire. He is also a two-time member of the U.S. Palma Team, and a five-time New Hampshire State Highpower rifle champion. Larry, who runs LPR Gunsmithing, has developed a brilliantly simple means of switching rifle barrels with an ordinary spanner or open-end wrench. With this set-up you can switch barrels in the field in seconds without the need for a barrel vice.
For most barrels, Larry mills a hex with six flats on the end of the barrel. This allows a shooter to change barrels quickly at home or on the line with a simple box-head wrench or a socket wrench. Larry says: “You don’t even have to take the barreled action out of the gun. Just set the buttstock on the ground, between your feet, put a wrench on it, hit it with the palm of your hand — and off comes the barrel.” For barrels fitted with a muzzle brake, Larry has a slightly different system. He mills two flats behind the brake so you can use an open-end wrench to do the job.
With either a hex on the end, or two flats for a brake-equipped rifle, the system works with any medium- to heavy-contour barrel with a muzzle-diameter of at least 0.700″. This will even work for high-power rigs using clamp-on sights or bloop tubes. Larry explains: “A lot of us here in New England use clamp-on front sights. The barrel will be turned to 0.750 for the sight, with the hex on the end. A bloop tube can go right over the end, no problem.”
Larry has used this system over the past few years to win a number of matches. In one 600-yard 3 by 20 prone match, Larry used three different barrels, with three different chamberings, on the same Savage rifle. Larry changed the barrels on the line.
Larry was able to do this because the system has little to no loss of zero from one installation of a given barrel to the next installation of that barrel. This lets the shooter start the match with confidence that the first sighter will be on paper. Larry reports that the simple system works great: “To date we have used this system on Savage, Remington, Winchester, RPA, and Nesika actions.”
Racine’s system is very affordable. If Larry does the chamber work on your barrel he charges $45.00 extra to mill a hex or two flats on your barrel. If you only want the hex or flats done, Larry charges $55.00. For more info, visit LPRGunsmith.com or call Larry at (603) 357-0055.
Forum member Danny Reever and this Editor recently discussed how novice reloaders can struggle with the fine points of reloading, making errors in seating depth, bushing choice, or sizing their cases. We agreed that a good resource covering more than “Reloading Basics” is sorely needed. Danny reminded me that Glen Zediker’s excellent Handloading for Competition book has been available since 2002. Danny says this may still be the best guide in print for those getting started in precision reloading, though the book is not without flaws.
Danny observed: “I consider this still the best book out there on the subject. I’ve bought a lot of other books only to be sorely disappointed after spending $30-$40 of my hard-earned cash. This book is not one of those! I’ve read and re-read Zediker’s treatise at least four times and refer to it often for advice while reloading. My number one suggestion for those who buy the book is to sit down with a highlighter and read it cover to cover. It’s well-written with a bit of humor and it is not boring.”
Extremely comprehensive, Zediker’s book covers nearly all of the key factors involved in accurate reloading: case sorting, brass prep, load development, neck-sizing, full-length sizing, bushing selection/use, tool selection, priming, powder measurement, and bullet seating. The book also explains how to test and evaluate your ammo, and how to monitor and interpret pressure signs.
There are many “must-read” sections in Zediker’s book, according to Danny: “The section beginning on page 161 dealing with concentricity (and how to achieve it) is excellent. Likewise the Load Limits section discussing pressures offers very valuable advice and info. You should also read Zediker’s commentaries about load testing, powders (burn characterics etc.), and the effects of temperature.”
Zediker has conveniently provided a detailed summary of his book on the web, complete with table of contents, sample pages (PDF format), and dozens of illustrations. Shown above is just one small section that covers ejectors.
Overall, we recommend Glen Zediker’s Handloading for Competition, though the book definitely could use some updating. Danny says: “Plunk down the $34.95 and buy this book, you won’t be sorry.” Zediker’s book is available from Amazon.com, Sinclair Int’l, and Zediker Publishing.
Hornady Manufacturing has recalled seven lots of 500 S&W 300 grain FTX® Custom™ pistol ammunition. Hornady ballisticians have determined that some cartridges from Lot numbers 3101327, 3110256, 3110683, 3110695, 3110945, 3111388, 3111885, may exhibit excessive chamber pressures. These lots were shipped between September 9, 2010, and October 17, 2011. Use of this product may result in firearm damage and/or personal injury.
Recalled Lot Numbers: 3101327, 3110256, 3110683, 3110695, 3110945, 3111388, 3111885. The Lot number can be found printed on the lower portion of the box label.
If you own any of these Lot numbers or have any questions regarding this recall, Call Hornady at 800-338-1242 right away. Hornady Manufacturing Company will make all arrangements associated with the return and replacement of this product.
Last week in Ottawa, Canada’s House of Commons voted to nullify a long-gun registry law that had been in place since 1995. The bill still needs to be ratified by the Canadian Senate. However, because Conservatives hold a majority in the Senate, most experts believe the repeal of the Registry is a “done deal” as soon as the repeal legislation goes up for final vote in the Canadian Senate.
The Chronicle Herald reports: “The vote effectively puts the registry on life support; all that remains is for the Senate to pull the plug. Since the Conservatives enjoy a commanding majority in the upper chamber as well, the Registry’s fate is sealed.” Liberal Senate leader James Cowan conceded: “They’ve got the majority and unless something extraordinary happens, it will pass.” Unfortunately, the Calgary Herald also predicted that Liberals might try to delay the Senate vote for weeks or even months.
If the Conservatives succeed in dismantling the Registry, tens of thousands of Registry records would be deep-sixed. That idea is popular with critics of the Registry: “the Harper government’s further directive to destroy all the data is a mammoth victory of the people over Big Brother” (Calgary Sun). Public Safety Minister Vic Toews said of the registry, “It does nothing to help put an end to gun crimes, nor has it saved one Canadian life. It criminalizes hard-working and law-abiding citizens such as farmers and sport shooters, and it has been a billion-dollar boondoggle left to us by the previous Liberal government.”
Thousands of shooting enthusiasts visit our Shooters’ Forum every day. The Forum now boasts over 16,600 members. One of the “main attractions” in our Forum are the Free Classified Ads. There you’ll find a huge selection of “previously owned” merchandise — everything from complete, top-flight match rifles to reloading components. There are great bargains on used hand-loading equipment — presses, dies, case prep tools, and miscellaneous hardware. You’ll also find scopes, rings, rangefinders and spotting scopes. This is one of the richest repositories of pre-owned precision shooting equipment you’ll find anywhere on the internet. Here are some of the gun offerings in the Forum Classifieds right now:
Message for Classified Sellers — How to Remove a Product Listing
For those of you who already sell items in our Classifieds, we have one request: delete your ad when the item sells. After guys sell their goods successfully, some of them neglect to delist their products and remove their ad. We suspect some newcomers to the site haven’t bothered to read the instructions. But it’s very, very easy to remove your advert once you’ve sold your stuff. In fact, you can delete your ad in a matter of seconds, with just two clicks of your mouse!
First, find the ad you placed in our FORUM MARKETPLACE. Then simply scroll down to the end of the thread (below all the replies) and look for the gray “Remove Topic” button. Click that and you’re done. Now wasn’t that easy?
The complete, final results of the Berger SW Long Range Nationals (at the Ben Avery Range in Arizona) have been posted. You can download all the results from the links at the bottom of this story. In case you missed our previous match report, Trudie Fay was the overall winner in the sling category, Jim Murphy took F-Open Class, and James Croft won F-TR. In team competition, The sling winners were the US National Team composed of Trudie Fay, Bryan Litz, Justin Skaret and Peter Church. In F-Open, the winning team was Team Norma/Berger composed of Larry Bartholome, John Brewer, Danny Biggs, and Jim Murphy. The winning F-TR team was the Arizona State Rifle & Pistol Assn. squad, with Warren Dean, John Chilton, Steve Lockwood and German Salazar. Complete Results are linked below.
This Video by Jim Everson, was shot from the pits at the 2012 Berger SW Nationals:
Michelle Gallagher of Berger Bullets provided this post-match message:
I hope you all enjoyed yourselves at the match and got back home safely. We were so excited that you could all make it, and I’m glad the weather even cooperated!
Thank you to everyone that helped out during the week. There are just too many to list everyone, but the match would not have run as smoothly without you, and we deeply appreciate everything you did. We want to give a special thank-you to Kathy Buell, Jennifer Litz, and Melesia Cisneros for their help. They had no idea what they were getting into when they volunteered to help, but they were invaluable. Also, Matt Schwartzkopf with AZ Game & Fish put in countless hours getting the range ready. He did an amazing job, the range looked beautiful, and we were excited to have him shooting with us! We also want to send a big thank-you to all the companies who donated to the match. We are so thankful for your participation, and I know the shooters were as well.
We’ll be sending out the results CDs as soon as possible, but here are some results for now. I also have them up on the Berger website. We’ll also be posting some photos of the match soon.