|
|
October 2nd, 2010
Canada’s mandatory long-gun Registry has been a billion-dollar failure that has not reduced crime. In recent months, concerted efforts have been made to scrap the Registry. Success was almost achieved last week, when a Private Members Bill to eliminate the Registry was narrowly defeated by just two votes. On September 22, Members of Parliament voted 153 to 151 to maintain the Registry. The vote followed weeks of intense political maneuvering by the federal Conservative, Liberal and NDP parties.
Canadian Outdoors Network Vows to Continue Registry Fight
The Canadian Outdoors Network (CON), a consortium of 28 outdoors groups (including the Canadian Shooting Sports Assn.), says Parliament’s decision to keep the long gun Registry will not end the national debate on firearm ownership.
 “This is just one battle in a long war,” says Dr. Robert Bailey, CON National Coordinator. “This is about competing visions driven by differing ideologies. For us, the fight is about preserving our hunting, fishing, trapping and shooting lifestyle. The Registry paints legitimate gun owners as people who are inherently a threat or a risk to society and that’s simply not the case.”
The Canadian Outdoors Network, representing 500,000 Canadian hunters, shooters, and sportsmen, will continue its campaign to scrap a program plagued by cost overruns and controversy. Since 1995, the registry has cost taxpayers more than $1 billion with no demonstrated reduction in gun crime.
“If public safety was the primary objective, the current national debate would be about crime control, not gun control,” says Bailey. “It’s time we refocused these funds, and our efforts, on more appropriate programs that actually target crime, such as the smuggling of illegal firearms.”
The Outdoors Network will continue to push for change as the country prepares for an anticipated federal election. “It’s important that these MPs know exactly what they’ve done,” says Bailey. “They were elected on promises to get rid of the Registry, then flip-flopped for political reasons… they have to be held accountable.”
The Canadian Firearms Registry is a government-run registry of all legally-owned guns in Canada. Compulsory gun registration was written into the Firearms Act (Bill 68) in 1995, which also provided for the establishment of a centralized database. It requires every firearm in Canada to be registered or rendered in an unusable state. This was an effort to reduce crime by making every gun traceable. Any person wishing to obtain a firearm must first acquire a Possession and Acquisition Licence or PAL.
The Registry was supposed to cost Canadian taxpayers approximately $119 million dollars. Instead, documents obtained by the Canadian Broadcasting Corporation show the program has cost upward of $2 BILLION dollars. At the same time there is little evidence that the Registry has had any notable effect on crime.
CANADIAN OUTDOORS NETWORK
Alberta Fish and Game Association
Alberta Outdoors Coalition
BC Wildlife Federation
BCWF Political Action Alliance
Canadian Institute for Legislative Action
Canadian Section of the Wildlife Society
Canadian Shooting Sports Association
Canadian Sporting Arms & Ammunition Assn.
Delta Waterfowl Foundation
Fédération Québecoise des Chasseurs et Pecheurs
Fur Institute of Canada
Friends of Fur
Hunting for Tomorrow Foundation
Long Point Waterfowl |
Manitoba Wildlife Federation
National Wild Turkey Federation
New Brunswick Wildlife Federation
Newfoundland & Labrador Wildlife Fed.
Northwestern Ontario Sportsmen’s Alliance
Nova Scotia Fed. of Anglers and Hunters
Ontario Federation of Anglers and Hunters
Pr. Edward Island Chapter Delta Waterfowl
Pr. Edward Island Trappers Association
Pr. Edward Island Wildlife Federation
Ruffed Grouse Society
Saskatchewan Wildlife Federation
Yukon Fish and Game Association
Wildlife Habitat Canada |
October 2nd, 2010
Swarovski makes fantastic hunting scopes. They feature extremely high-quality glass, that is bright and razor-sharp. Excellent light transmission ensures good performance at dawn and dusk. Right now, through the end of October, MidwayUSA has clearance-sale pricing on two Swarovski medium-range zooms suitable for varminting or long-range hunting.
The Swarovski PH 4-16x50mm (30mm) with Ballistic Reticle (item #676135) is marked down from $1,849.00 to $1,399.00, a $450.00 savings. The higher power Swarovski AV 6-18x50mm with Ballistic Reticle and 1″ main tube (item #220145) is $929.00 on sale, reduced from $1229.00. Whenever you can get a mid-range zoom Swaro for under a grand, it’s a pretty good deal. Both these scopes feature diopter-type eyepieces offering ample focus correction. That’s a big plus if you normally need glasses but don’t have prescription shooting glasses.
Both scopes are covered by Swarovski’s 30-year warranty. The AV 6-18x50mm is less expensive, but the PH model should provide enhanced lowlight performance.
IMPORTANT: both these scopes have metric, non-standard click-values. The PH 4-16x50mm moves 0.5 cm per click at 100 meters (about .18″ at 100 yards), while the AV 6-18x50mm moves 1.0 cm at 100 meters (about .36″ per click at 100 yards). Make sure you can live with metric clicks before purchasing either scope.
October 2nd, 2010
This year’s final NRA Range Development & Operations Conference will be held next week in San Antonio, Texas. Graduates of the course tell us they learned more in this 5-day course than in years of independent research. Attendees will receive a multidisciplinary perspective on major topics including:
- Developing business and master plans
- Public hearings and zoning boards
- Environmental sound
- Insurance
- Lead on outdoor ranges and OSHA lead standards
- Range maintenance
- Range safety
Next week’s event is sold out, but the NRA will offer other range development conferences in the months ahead. NRA event coordinator Kara Schlifke reports the 2011 dates will be posted as soon as possible. Potential participants should register early to guarantee their spots. Registration is $450.00 per person, and includes a continental breakfast, afternoon snack, and conference materials.
Would you like to learn more about this program? Contact Kara Schlifke at KSchlifke@nrahq.org or 877-NRA-RANGE, or visit the NRA’s Range Development webpage.
October 1st, 2010
 The 4R Rifle Club’s Team Hunting Challenge is one of the only matches in the country to mimic a long range hunting scenario. The match is held in central Oklahoma and has evolved over the last thee years to challenge not only the competitors’ marksmanship but also their ability to handle stress in the field.
A strict time limit puts pressure on the two-man shooter/spotter teams. In the 13-minute alloted time, the shooters attempt to find and range 12 wooden animal silhouettes and then score hits on the steel vital areas.
Shooters and spotters must work together and communicate well to get through all the targets in the given time. Plus, this year a Speed Shoot was added to the Hunting Challenge. This timed stage gave teams just 40 seconds to engage five (5) known-distance targets with one shot each. That works out to just 8 seconds per target, requiring the trigger pullers to be ultra-fast, AND accurate.
Surgeon Rifles Duo Tops Field
The Hunting Challenge was well-attended, with competitors coming from Missouri, Tennessee, and Utah, to join the usual group of shooters from Oklahoma and Texas. Small targets, improvised shooting positions, and constantly-switching winds made this a tough event, demanding high levels of skill and rifle accuracy. Preston Pritchett of Surgeon Rifles and his ace spotter Wade Stuteville came out on top with 65 out of 89 points. Preston and Wade put on a clinic, beating the second-place team, Dean Morris and Rick Jensen, by 15 points (equivalent to five first round hits). Finishing third was the team of Jeff Badly and Chase Tressler.
Hunting Challenge Teams Snag $30K Worth of Gear
This year’s Hunting Challenge prize table held over $30,000 worth of merchandise. Preston and Wade were each awarded a fully-outfitted Savage 10 Precision Carbine rifle, complete with Harris bipod, and 3.5-15x50mm NightForce NXS scope. Dean and Rick each took home a Vortex Razor HD rifle scope with rings. Two Swarovski SLC HD 10×42 binos were handed out to the third-place team. There were prizes for 24 of the 30 teams and the top 15 teams received a prize with a value that equaled or exceeded the $400 match entry fee. Full results, photos, and a sponsor list are posted on the Snipers’ Hide Forum.
Credit B.J. Bailey for this match report and photos.
October 1st, 2010
Marking the beginning of October, Precision Rifle & Tool, LLC (PRT) is offering a great promotion for our readers. Now through October 7th, PRT is discounting a straight (no gimmicks) 15% off its “cut to order” stock blanks. You may not know, but PRT supplied the stock Charles Ballard used win back-to-back F-Open Class Championships in 2008 and 2009. The PRT stocks are very solid platforms, with a low center of gravity. The forearms, despite having a low-profile contour, are stiff and solid.
Ray Bowman, PRT’s owner, explained that the 15% off “October Blast” sale is good for the next week, through midnight EST on October 7. If you miss the deadline, you can still save big. After the 7th, Bowman will knock 10% off PRT stock blanks through the end of October. According to Ray: “You can choose from the Ballard F-Class Open Low Boy, F-TR Low Boy, the C-4, Low Boy Bench Rest ,and the T-5. These blanks can be are inletted for most all custom actions including Bat, Kelbly Panda, and Barnard. In addition, PRT can inlet for the following factory actions: Remington (and Rem clones), FN Model 70 SA, and the Weatherby Vanguard. If you miss the 15% saving you can still receive 10% discounting for the remainder of October.” If you purchase 2 or more stocks (after the 7th, and before the end of October) PRT will knock 10% off the total order and ship the (two or more) stocks FREE to the lower 48 states.
For details, visit www.precisionriflesales.com. Or, from 9 am to 4 pm (EST) Monday- Friday, call Ray Bowman at (336) 214-5381. You can also speak to Charles Ballard at (336) 516-5132. Charles helped fine-tune the stock designs and he works as a PRT sales rep.
Key Features of the new Ballard F-TR stock are:
- Extended front to provide proper balance with long barrels.
- Low profile design for a lower, more stable center of gravity.
- Buttstock has a 1/2″ machined flat on the bottom and angled sides to provide superior tracking in the rear bag.
- Buttstock has a slight angle to allow minor elevation adjustments.
- Optional adjustable buttplate and optional adjustable cheekpiece.
Disclosure: Precision Rifle Sales has purchased advertising on this site.
September 30th, 2010
Earlier this month Wilson Combat launched its new gun blog, which is worth a visit. Though focused primarily on handguns, the Wilson Combat Blog also features tactical rifles and shotguns. While there are match reports and gun maintenance articles, the Wilson Blog is mainly a showcase for products, which are illustrated with really superb photography (some of the best “gun glamour” images on the web). Here are some examples of the “eye candy” Wilson combat offers on its site…
Case Colored 1911 for Trey of Jackson Armory in Texas
Trey calls this unique, Case-Colored custom the “Patriot Elite”. The slide is hand polished and then sent to Doug Turnbull for his exceptional bluing and color case hardened finish on the frame. The frontstrap was left bare to show off case colors.
Custom Professional with Flush-Crowned Barrel
Another interesting gun is this 4″ Commander-style 1911 K-5 with beautiful, fan-pattern Cocobolo grips. Notice that the muzzle is flush crowned. A new option for Wilson, the flush crown is made possible by the use of a flat wire, Glock-style recoil spring. This new feature is only available for compact/professional length slides at this time.
Wilson Arms AR Trigger — Long-Term Test
The Wilson Arms Blog also links to a Military Times long-term test of the Wilson Tactical Trigger Unit (TTU) for AR-type lowers. The Times tested the TTU over six months with 10,000 drops of the hammer. Click Here to read the full review, published on Sept. 29, 2010.
September 30th, 2010
A while back, Forum member Andy (aka GrayMist) did an interesting test, with five (5) different types of .243 Winchester Brass. He collected Federal, Lapua, Remington, and two different lots of Winchester-brand brass. Then he selected ten (10) cases at random from each brand and measured their weights. To ascertain case capacity, three (3) cases from each brand/lot that were closest to the average weight for that brand/lot were selected. The results were surprising: there was less than one (1) grain capacity difference between all the cases, even with a 14.7 grain maximum difference in case weight!
Measuring Procedures
The cases were sized in a Redding body die then primed with a spent primer. All were weighed before and after filling them with distilled water. The capacity shown is an average of all three (3) cases from that lot and represents grains of water. Note, I tested two lots of Winchester brass. Lot A was purchased in 1999. Lot B was from factory .243 ammo. There is a rather large disparity in case weight between the two lots.
| Brand |
Federal |
Lapua |
Remington |
Winchester A |
Winchester B |
| Capacity |
53.9 |
54.4 |
53.7 |
54.8 |
54.8 |
| Aver. Weight |
173.28 |
173.13 |
165.34 |
158.58 |
166.44 |
| SD¹ |
0.46 |
0.39 |
0.17 |
0.58 |
0.42 |
| Range² |
1.70 |
1.10 |
0.40 |
1.80 |
1.40 |
| % of Avg.³ |
0.98% |
0.64% |
0.24% |
1.14% |
0.84% |
1) Standard Deviation in grains.
2) Range is the difference in weight between the heaviest and lightest cases in the test.
3) Case range weight divided by the average weight.
 What the Numbers Mean
… And Some Speculations
Andy observes: “It certainly seems there is a huge difference in case weight between Winchester lot A and any other brand of 243 tested. What is also surprising is that there was less than one (1) grain capacity difference between all the cases, even with a 14.7 grain difference in case weight!
Should one be wary of trying the same loads that were initially tested in the light weight Winchester brass even though the capacity difference is small? I have had some interesting results with one brand brass that I cannot pass on yet, except to say I sent that company a sample of the lot I have been using. The Remington brass weight range was very low. These were taken from a box of once-fired factory ammo. I will have to acquire some more and measure it.”
Results of Larger Lapua Sample
In a previous session Andy weighed all 100 Lapua cases he had on hand. His measurements showed a total variation of 2.1 grains, with the weight range being 172.5 to 174.6 grains. That is a 1.2 percent spread. The most that came in at the same weight were 11 cases at 173.5 grains.
September 29th, 2010
by Kerrin Brinkman, NRA BLOG
Just a few days after his win at the 3-Gun Nation Championship (earning him a $25,000 prize), SGT Dan Horner of the USAMU won another 3-Gun event, the Adams Arms Ozark 3-Gun Championship in Missouri. There was plenty of excitement at the final shoot-off on Sunday afternoon. Eight top shooters competed in the shoot-off, with a $5,000 check on the line.
The first two competitors to face-off were famed 3-gunner Taran Bulter and SGT Dan Horner, still fresh off his big win at the 3-Gun Nation Championship. Known for his speed, Horner had the advantage out of the gate and knocked Butler out of the running.
The next pairing was seasoned shooter Kurt Miller and newcomer Bryan Ray. While Miller has been a strong presence in the world of iron sights for years, Ray recently broke onto the scene, capturing first place in the Heavy Metal class for his first win at a national-level competition. In the end, Ray was able to beat Miller after an incredible run and advanced to the semi-finals.
Up next were Clint Upchurch and Rob Romero of the Noveske Shooting Team, where Romero's blazing speed earned him a win into the semifinals. The final pairing was Surefire's Barry Dueck versus Chris Sechiatano, with Sechiatano edging out Dueck to secure a spot in the next bracket.
Horner and Ray were next to the line in a nail-biting run. The pairing of Horner, perhaps the fastest shooter the sport of 3-gun has ever seen, against Ray, a hard-charger who seemingly rose to the leaderboard out of no where, was exciting to say the least. Although Ray had an incredible run, Horner’s speed and accuracy gave the young Staff Sergeant the upper-hand. The finals came down to Horner and Romero. Despite his best efforts, Romero couldn’t match Horner’s speed. SGT Horner walked away with another 3-Gun win under his belt and a check for $5,000 in his hand.
September 28th, 2010
Werner Mehl, the engineering genius behind Kurzzeitmesstechnik (Kurzzeit), a German technology company, has come up with another spectacular ultra-slow-motion video. Werner has developed some of the most advanced video equipment in the world, allowing him to film bullets in flight with frame rates up to 1,000,000 frames per second. That’s not a misprint — some of the Kurzzeit video cameras can record at ONE MILLION frames per second, though typical Kurzzeit “high-speed” videos might be shot at 200,000 or 250,000 frames per second.
This 10-minute video was specially prepared by Werner for the 2009 SHOT Show. A masterpiece of high-speed movie-making, Werner’s video displays an amazing array of projectiles and targets. You can see bullets hitting armored and non-armored targets, bullets ripping through ballistic gelatin, bullets shattering glass, and even shotgun pellets striking rifle bullets in mid-air. Look for the effect of hollow points as they pass through the ballistic gelatin, and at the 4:26 mark you can see an airgun pellet slice though a paper target.
 High-Tech Equipment from Kurzzeit
In addition to producing high-speed video equipment, Kurzzeit builds the PVM-21, one of the most advanced consumer chronographs on the market. The “all-infrared, all the time” PVM-21 works in any lighting conditions, including total darkness. It employs two banks of infrared sensors (front and back — the black boxes in right photo). These are aligned vertically and placed 8″ apart (left to right.) That gives you a huge 4.5″ x 8″ sensor area to register shots. We’ve worked with some other chronographs where the practical “sweet spot” for reliable results was just 2″ x 2″, when using an air rifle. The PVM-21’s large sensor area makes it easy to align your rifle, and you don’t get errors if your shot is just a little off-center.
The PVM-21 can hook up directly to a lap-top computer. That way you can record all your shot velocity data directly into a spreadsheet. The PVM 21’s large sensor area and software interface make the PVM one of this Editor’s favorite chronos, along with the classic Oehler model 35P. In the USA, the Kurzzeit PVM-21 is sold by Neconos.com. The $749.95 price includes sensor unit (with infrared), processing/display unit, infrared remote control, and software. It’s an impressive package — we just wish Werner would upgrade the display unit to include a rechargeable 12V DC battery. Right now you need to use an inline 120V AC to 12V DC transformer, or carry a separate 12V battery. I personally prefer to use a 3.5″x1.5″ rechargeable 12V battery rather than a 120v transformer and extension cords.
September 27th, 2010
 We’ve confirmed that Danny Biggs, the Spirit of America’s F-Open Class Winner, shot the match using a bipod, rather than a pedestal rest. This is pretty remarkable because top F-Open competitors have traditionally preferred the stability and quick adjustability you get with a deluxe pedestal rest such as a Farley, John Loh (J.J. Industries), or SEB. Of course, Danny had a trick up his sleeve — his prototype Sinclair International bipod features a quick-adjusting elevation control. No, you can’t buy a bipod like Danny’s — at least not yet. Sinclair Int’l hopes to offer production versions before the end of 2010.
Sinclair staffer Pete Petros competed at the 2010 SOA Match, and recounted his experiences in Sinclair’s Reloading Press. Concerning Biggs’ bipod, Petros wrote:
An interesting fact about Biggs’ win is that he was shooting off of the Sinclair F-Class Bipod which is generally used in F-TR competition. In F-Class open most competitors shoot off of a bench-type rest modified to shoot off of the ground in the prone position. The bipod Biggs [used] is a new-model Sinclair Elevation-Adjustable version of the newer Sinclair F-Class Bipod. Danny has been testing this product for us during the past year and obviously is having great results. We should have these bipods ready for production in a few months. Keep posted to our website for announcements. But trust me, I think Danny would shoot well balancing his gun on a rock –- he’s that good!
 While most F-Open shooters used a front pedestal rest, either a joystick design or a center column pedestal with remote-adjustable windage top, Danny used a wide-base bipod, as he had done at past Nationals in the F-TR class. But Danny’s bipod was very special. It is a prototype, modified Sinclair design with height adjustment via a central, vertical-axis knob.
As you can see from the pictures below, the left and right bipod legs are attached to a T-shaped silver (aluminum) bracket. This bracket moves up and down as the silver knob is turned clockwise or counter-clockwise. As the knob turns, its threads pull the T-shaped bracket up and down relative to a center block of aluminum bolted to the bipod’s attachment to the rifle’s forearm accessory rail. With this system, Danny can easily reach forward and make precise adjustments in elevation. Note that the Sinclair bipod’s secure rail attachment is retained and Danny can still adjust rifle cant (tilt), using the rear push-button handle. This rear handle functions like a Pod-lock allowing the rifle to be tilted a few degrees to one side or the other to compensate for side-sloping terrain.
|
