Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









August 9th, 2009

Laramie Wins President's Rifle Trophy Match — Tucson Teen Finishes Second

The National Trophy Rifle Matches are a series of competitions held at Camp Perry between the Smallbore Championships and the High Power Championships. Trophy matches include Team Competition, Individual Matches, Junior Events, Vintage Military Rifle Matches, Garand matches, and the prestigious President’s Rifle Trophy Match.

Laramie, Presidents Trophy Match Champion

In what may be the biggest single rifle event in the United States, Mark Laramie out-shot 1262 service rifle competitors to win the historic President’s Trophy Match with a 390-13X Aggregate score. Tucson (AZ) teen sensation Tyler Rico finished a close second, just two points behind, scoring 388-15X. Only 15 years old, Rico is the youngest shooter in the history of the President’s Trophy match to place second. He is also the youngest-ever recipient of the Distinguished Rifle Badge, which he received at the 2007 National Matches.

Junior Shooter Tyler Rico

Traditionally, the top finisher in the President’s Trophy Match receives a letter of congratulations from the President of the United States. The tradition began with Theodore Roosevelt in 1904, a renowned advocate of rifle training, who wrote a congratulatory letter to that year’s trophy winner. The cut-off for this year’s President 100 was a 283-4X. The “President’s 100” will also receive President’s 100 medallions and certificates.

The President’s Trophy Match current format, adopted in the 2007, pits the top 20 competitors from the 30-shot qualification round in a shoulder-to-shoulder contest at the end of the match. The qualifiers fire an additional 10-shots in prone at 600 yards, and this final score is added to their qualification score to determine the winner. Shooters faced blustery wind conditions all day, and a change from sunshine to overcast skies in the middle of the final. Despite the conditions, Laramie outlasted second-place finisher Tyler Rico and perennial challenger U.S. Army SFC Grant Singley, who finished third. Entering the final, Laramie was in the lead with a 296-10X qualifying score, and went on to shoot a 94-3X to win by two points over Rico and SFC Grant Singley. Both Rico and SFC Singley shot higher scores in the final than Laramie, but could not overcome Laramie’s early lead.

Complete National Trophy Match Ranked Results | National Trophy Match Photos.

This report courtesy The First Shot, the CMP Online Magazine

Permalink Competition Post comment »
August 9th, 2009

Tiny Trijicon Red Dot Wins Optic of the Year Award

Trijicon RMR Spec SheetA red dot sight can speed up target acquisition dramatically when shooting carbines, shotguns, or pistols at short ranges (where ballistic drop compensation is not an issue). Just put the dot on the target and pull the trigger. For older shooters who may have trouble focusing on both front and rear sights, a red dot makes the aiming process much easier. And for novices, who may have trouble aligning front and rear sights, the red dot gets them on target quicker and more reliably.

Where red dot sights are allowed in action pistol competition, they are almost universally used. If a red dot is compact enough, it can also work on a defensive handgun. However, a red dot is normally worthless when the batteries run down. Trijicon has solved that battery issue with its new Ruggedized Miniature Reflex™ (RMR), the world’s first battery-free mini reflex sight. The RMR uses light-gathering fiber optics and tritium for the display, so no battery is requried. The Tritium phosphor display works even in low-light situations, and is guaranteed to illuminate up to 15 years. The new RMR is extremely compact, measuring a mere 1.78″ L X 1.24″ W X1.03″ H and weighing in at only 1.22 ounces. This makes it small and light enough to mount on most handguns

Trijicon RMR Spec SheetTrijicon, Inc.®, has been honored by the Firearms Marketing Group (FMG) for its innovative new Trijicon RMR™ Sight. The patent-pending Trijicon Ruggedized Miniature Reflex™ won the prestigious “Optic of the Year” award, chosen by 500 top industry executives, gun dealers and outdoor writers.

In addition to the fiber optic + Tritium RMR (no battery required), Trijicon markets a more conventional battery-powered version with LED display. Using a single CR2032 battery (with an auto-shut-off circuit), this can provide up to 17,000 hour of battery life. The LED display also adjusts automatically for ambient light levels. Both RMR versions feature a tough, 7075-T6 aluminum alloy housing. Rugged and reliable, the Trijicon RMRs (both versions) come with a lifetime warranty from Trijicon.

Trijicon RMR Spec Sheet

Permalink News 1 Comment »
August 8th, 2009

New FN TSR XP — Great Deer Rifle in "Tactical" Guise

Tactical, Smacktical. FNH USA is trumpeting the “tacticality” of its new FN TSR “Tactical Sport Rifle”, but what we think they’ve created is a great hunting rifle for small deer, coyotes and other medium-sized game. The TSR comes in two versions — the TSR XP USA (.223, 7.62×39), and the TSR XP (.308 Win, .300 WSM). Both models feature a Win m70-type action with controlled feed, an olive drab Hogue over-molded stock with aluminum bedding block, and a one-piece steel MIL-STD Picatinny rail with built-in elevation. And yes, that nice rail is standard. The factory trigger adjusts from 3 to 5 pounds.

FNH TSR Tactical Sport Rifle

Compact 7.62×39 XP USA features 20″ Fluted Barrel
The smaller XP USA version, as chambered in 7.62×39, is most interesting to us. There are few other US-made bolt action rifles in this popular caliber. The XP USA features an ultra-short action and weighs 8 lbs., 11 ounces. (Why is that action based on the Model 70? Well, for starters, FNH now owns Winchester Arms and builds Model 70 actions in its South Carolina plant.) With a fluted, 1:12″ twist, hammer-forged 20″ barrel, this 7.62×39 looks to be a very handy, ergonomic, and versatile rifle.

FNH TSR Tactical Sport Rifle

We’ve used the Hogue over-molded stocks which feature a grippy, rubberized surface. Some folks don’t like the rubbery feel, but for field work, we’ve found the over-molded surface easy to hold and really secure in wet or snowy conditions. We like the idea of a very short action, combined with 5-round (7.62×39) or 6-round (.223) capacity, with hinged floorplate. We think the 7.62×39 is more than adequate for small deer. It’s hitting power rivals that of the classic 30/30, one of the most popular deer cartridges of all time.

If you prefer a bigger caliber, or detachable box magazine (DBM), you can order the medium-action TSR XP version in .308 with 4-round DBM, and either 20″ or 24″ barrel. Fitted with the longer barrel, the XP in .308 is a full pound heavier than the more compact 7.62×39 XP USA.

Permalink Hunting/Varminting, New Product 5 Comments »
August 8th, 2009

$688 Liberty Gun Safe from Sam’s Club

Sam’s Club is offering one of the best deals in gun safes right now — a 60″ H x 30″ W x 22″ L Liberty Centurian safe for $688.00. That is the store pick-up price. The safe weighs 520 lbs. and has 23 cubic feet of exterior volume. Walls are 12 gauge steel and the safe is fire-rated for 30 minutes at 1200° F. The lock is a Sargent & Greenleaf electronic, one of the best units in its price range. This very same safe is sold by Liberty Dealers for $999-$1099.00. If you’re able to get this safe home on your own, this is an excellent value from a respected safe-builder. I’ve got a friend who purchased one of these safes and I helped him install it and set up this interior. I can assure you that you’ll have trouble finding more safe for the money. I consider it better than a $1000.00 Canon I used to own.

Centurian Libery Safe

Note, you’ll have to call your local Sam’s Club for availability and exact price. If it’s not available at the closest outlet, try other nearby Sam’s Club stores (you can search for availability on the Sam’s Club website). Typically a Sam’s Club outlet will get a half-dozen of these and they’ll sell out in a few days. Also, we want to caution people that this safe, while far more secure than a typical “security cabinet” with a locking key, is a far cry from a serious 1500-lb commercial-grade safe. On the other hand this safe is just about the biggest size that can be easily handled by a couple non-professional guys working with a furniture dolly. The unit is delivered on a wood pallet — we recommend leaving the pallet on until you get the unit inside and positioned. Then remove the wood and bolt down the safe through the four holes are pre-drilled in the bottom (these are hidden by the carpet).

Here’s a review from a buyer who purchased this Liberty Safe at Sam’s Club: “We really shopped the competition prior to purchasing this safe. For the fire rating and the storage space, this was consistently $200-$600 less than many of the other membership retailers in addition to ALL sporting good stores (even the Mega stores.) The safe is packaged well and the instructions are pretty thorough also. The mechanics are as good as any gun-store-bought safe, better in most cases. The S&G lock is easy to program and use. Just be sure the lock handle is twisted all the way counterclockwise [after you close the door]. The modular interior is great. We store some paperwork, ammunition and of course firearms in the safe and there’s more than enough room. Sam’s Club is untouchable on the price of this safe. Do the homework yourself — it’s the best value for the money anywhere.”

Permalink Gear Review 5 Comments »
August 7th, 2009

High Power Silhouette Championships Commence at Raton

The High Power Silhouette Championships at the NRA Whittington Center (Raton, NM) started Thursday morning (August 6th) with many Smallbore Silhouette competitors taking to their big guns for High Power. Match 1 went well but extreme afternoon winds were blowing silhouettes off the rails so Match 2 was halted. That means the remaining two High Power Hunting Rifle matches over the next two days will jump to 60 shots rather than 40 to close the gap. The top shooters in Match 1 were Joy Cox (35), Defending Champion Angustin Sanchez, Jr (34 – 9 turkeys), and Laura Goetsch (34 – 8 turkeys)

Silhouette Champion Agustin Sanchez

The High Power Silhouette Championships are similar in format to the Smallbore Silhouette Championships held earlier this week. The Standard Silhouettte High Power Rifle matches are shot in the morning with the Silhouette Hunting Rifle Class shot in the afternoon. The main differences between the disciplines are obviously the type of rifle (Centerfire vs. Rimfire) and the distances. For High Power, targets are set at 200 meters (chickens), 300 meters (pigs), 385 meters (turkeys), and 500 meters (rams), while in Smallbore, targets are set at 40, 60, 77, and 100 meters.

A variety of chamberings are popular in the centerfire Silhouette game, including the .243 Win, 6.5 BR, 6.5×47 Lapua, 260 Rem, 7 BR, 7mm-08, and the .308 Winchester. In selecting a caliber, shooters must balance between knock-down power and recoil force. A 6.5mm or 7mm bullet in the 130gr range running 2900 fps is just about ideal. You also need a caliber capable of serious inherent accuracy.

This report courtesy the NRABlog.com

Permalink Competition 3 Comments »
August 6th, 2009

NEW Large Flash-Hole Reamer and Large-Caliber Neck-Turner from Sinclair Int'l

Sinclair Int’l has introduced two important new reloading products. Both are items that reloaders have requested for quite some time. Sinclair listened and now offers: 1) a precision large (.081″) flash hole reamer; and 2) a neck-turning tool for large cartridges such as the 50 BMG.

Large Flash-Hole Reamer
Sinclair has released a new, .081″-spec “outside-in” Flash Hole Reamer (item 07-3081) designed to designed to uniform standard flash holes to exactly .081 inch. This 3-piece tool features all stainless steel construction, a double-ended reamer guide for both large and small primer pockets, a knurled handle for easy turning, and a straight-fluted .081 inch reamer. With this tool you can remove burrs or obstructions in the flash hole and ensure that all your flash holes are the same size. NOTE — this tool works for both small primer pockets AND large primer pockets, for cartridges with .080″ nominal diameter flash holes. The new 07-3081 tool costs $37.50.

AccurateShooter Sinclair Flash Hole Reamer

For quite some time, Sinclair Int’l has sold a similar device for small (PPC and BR-size) flash holes. Like the new 07-3081 unit for large flash holes, the 07-3000 Reamer for small flash holes works from the outside, so it can index off the primer pocket. It reams to .0625″, and also costs $37.50. The standard dimension for Lapua 220 Russian and 6mmBR flash holes is 1.5mm or .0590″. This tool will permit standard-size decapping rods with .0625″ tips to work without binding. However, note that both Forster and Redding normally supply .057″ decapping pins with their PPC and BR dies. So, it is NOT necessary to ream your Lapua BR/PPC flashholes, unless you prefer to do so for uniformity. It IS, however, a good idea to check BR/PPC flash holes for burrs before loading the first time.

AccurateShooter Sinclair Flash Hole Reamer

NOTE: If you purchase either the 07-3081 or 07-3000 Sinclair Flash Hole Reamer tools, we recommend you mic the cutter tip before you process a bunch of cases. Sometimes a tip comes through that is oversize. This will ream the flash holes larger than you may intend.

Large Caliber (35-50) Neck Turning Tool
Jumbo rifle cartridges, such as the 408 Chey Tac and 50 BMG, are becoming more popular with precision shooters, and Sinclair’s customers have asked for a neck-turning tool which will handle the large calibers. Sinclair’s new NT-5000 Neck Turning Tool will work for cartridges from 35 caliber all the way up to 50 cal, including the 50 BMG. This new tool uses the same smooth, cutter adjustment system as Sinclair’s NT-1000 Neck Turner, but a special oversize case-holder is furnished with each NT-5000 tool. Special large-caliber Expander Dies, and large-caliber turning and expander mandrels are available individually or as part of a Large Caliber Neck Turning Tool Kit.

AccurateShooter Large Caliber Neck Turner

Permalink New Product, Reloading Post comment »
August 5th, 2009

Cathy Winstead-Severin Wins Smallbore Silhouette Championships

It was “Ladies First” at the 2009 NRA National Smallbore Silhouette Championships. Cathy Winstead-Severin shot brilliantly to win both the Rifle AND Hunting Rifle titles, as well as the High Woman title for both classes. We’ve always said women can compete head to head with male shooters and win. Cathy proved that convincingly.

Silhouette Champion Cathy Winstead-Severin

This wasn’t Cathy’s first big victory. She won her first National Smallbore Silhouette title in 1998. Along with husband James Severin, Cathy operates Good Shooting Sales & Service in Joplin, Missouri, a shooting supply business specializing in rimfire and silhouette products.

Smallbore Rifle Championship Top Finishers:
First Place (and High Woman): Cathy Winstead-Severin: 111
Second Place: William Motl: 108
Third Place: Derek Greenaway: 107
High Junior: Tyler Kamp: 104
High Senior: Loren Peter: 96
Team Champions: Texas State Gold: 214

Smallbore Hunting Rifle Championship Top Finishers:
First Place (and High Woman): Cathy Winstead-Severin: 108
Second Place: William Zander: 105
Third Place: Laura Goetsch: 104
High Junior: Tyler Kamp: 98
High Senior: Bob Snyder: 85
Team Champions: Belgrade Air Shooting Sports: 205

Permalink Competition Post comment »
August 5th, 2009

Make Your Own Length-to-Lands Gauge

RELOADING TIP: Andris Silins has come up with a simple way to measure length to the lands in your rifle:

“Here’s what I did to find length to lands for seating my bullets. I made four cuts into the neck of fire-formed brass. Then I pressed the bullet in lightly and chambered the entire gauge. As the cartridge chambers, the bullet slides back into the case to give you length to lands. It took less than five minutes to get it cut and working. A little light oil in the barrel just past the chamber helps ensure the bullet does not get stuck in the lands. It works great and is very accurate.

case OAL gauge home made

I made the cuts using a Dremel with a cut-off wheel. You can adjust tension two ways. First, you can make the cuts longer or shorter. Longer cuts = less tension. If you used only three cuts insted of four you would get more tension. The trick is to be gentle when you open and close the bolt. If you ram the bolt closed you may wedge the bullet into the lands. When you open the bolt it helps to keep a finger or two near by to guide the case out straight because the ejector wants to push it sideways.”

Permalink Tech Tip 2 Comments »
August 5th, 2009

Shooting Skirt Holds Gear on Tripod

Here’s a clever, innovative product from Good Shooting Sales & Service, a shop operated by National Smallbore Silhouette Champion Cathy Winstead-Severin and her husband Jim Severin. The Shooting Skirt, available in either Nylon mesh or Cordura for $32.00, is a cone-shaped, fabric gear-holder that fits around the top of a tripod. The Shooting Skirt has various pockets that can store score cards, timers, Walkie-Talkies, spotting boards, and other accessories. The Shooting Skirt even has a water bottle holder.

Tripod Gear Holder Skirt Tripod Gear Holder Skirt

We think the Shooting Skirt is a really clever product that can benefit varmint hunters as well as those who are scoring/spotting in shooting matches. For anyone who spends a lot of time working with a tripod in the field or at a range, the Shooting Skirt can be a very handy accessory.

Craft Your Own Custom Shooting Skirt — With High-Tech Options
What’s neat about this basic design is that it could be easily modified to suit your needs. If you (or the significant other) can run a sewing machine, you could make something similar, customized for the particular gear you use. You might add a pocket for a windmeter, or a special section to hold the lens caps for your spotting scope. Or, if you’re really clever, you could add a flexible solar panel to provide back-up power for your PDA, cell phone, or cameras.

Foldable Solar Power Panel

Permalink New Product Post comment »
August 4th, 2009

NRA Smallbore Silhouette Championships Conclude Today

Roughly 130 competitors have gathered at the NRA Whittington Center for the NRA Smallbore Silhouette Championships held August 2-4. Today the final matches will be held for the Smallbore Rifle Class and Hunting Rifle Class Silhouette Championships.

This year, 13 shooters have traveled from Mexico to compete against some of the best Smallbore Silhouette shooters in the United States. Seven of these Mexican competitors made the 20-hour journey together. Surprisingly however, the Mexican contingent did NOT include Agustin Sanchez, Jr. this year. Agustin, the “Tiger Woods of Silhouette” has won the event for the past six years, but now someone else will take his title. “It’s up for grabs,” said NRA Silhouette Program Coordinator Jonathan Leighton. “There are a lot of good shooters here, so it’s anyone’s game right now.”

NRA Smallbore Silhouette

Above, Gabriel Guerra of Mexico shoots while Carlos Mercado spots for him. Guerra loves Silhouette shooting for the comradery and the challenge: “I enjoy the mental game, and it’s a very fun sport. You meet nice people, here and in Mexico. I like the friendship of the teams.”

Invented in Mexico, Adopted in America
It’s thought that silhouette shooting began in Mexico around 1914 as a marksmanship contest between Pancho Villa’s men. The sport spread throughout Mexico following the Mexican Revolution, eventually making its way to America in the 1960s. Silhouette shooting started as a centerfire sport, but over the years rimfire silhouette has become more popular. CLICK HERE to read about the history of silhouette competition.

Smallbore Silhouette

If you’re interested in getting involved in smallbore silhouette, a fun yet challenging discipline, you’ll find a Summary of Silhouette Basics in our Daily Bulletin Archives. You’ll also find more information, including current rules, on the Steelchickens.com website.

Smallbore Silhouette Course of Fire and Rifle Classes
At an official Smallbore Silhouette match, you’ll shoot at least 40 shots, ten each at four sets of 1/5th size standard High Power Rifle Silhouette targets. The smallest targets, the chickens, are set at 40 yards, Pigs are at 60 yards, Turkeys are at 77 yards, and Rams are at 100 yards. (Alternatively, metric distances are used.) Though the rams are the largest targets, hitting them is far from easy. At 100 yards, a little bit of wind will blow you off the target. Two classes of rifles are used in Rimfire Silhouette: Standard and Hunter Class. Standard rifles can weigh up to 10 pounds, 2 oz. (with sights) and have no restriction on trigger pull weight. The fore-end shall not exceed 2 1/4″ wide, and 2 1/4″ deep measured from the centerline of the bore.

Permalink Competition, Hunting/Varminting Post comment »