Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









June 5th, 2009

Kent Reeve Sets NRA Metric Smallbore Record

Kent Reeve Palma teamForum member Kent Reeve (Cary, NC) is best known as a High Power and long-range shooter. Kent won the 2006 NRA National Long-Range Championships, edging out John Whidden by two points. However, Kent recently set a new NRA civilian record for smallbore metric prone shooting. Scoring 1,576 out of a possible 1,600 points, Reeve broke the record at the NC Smallbore Metric Prone State Championship held May 9-10 in Creedmoor, North Carolina. Kent used Lapua’s new X-ACT rimfire ammo.

Reeve’s accomplishment attracted the attention of the mainstream media. On June 4, Reeve was profiled by the News & Observer in Raleigh, NC. In that story, Reeve revealed that he shoots rimfire matches “for the training… it’s easier to find a 100-yard range.” Reeve also explained that smallbore shooting helps improve his centerfire marksmanship because the longer barrel time of the 22LR round makes a perfect hold even more important: “The .22 [rimfire] bullet stays in the barrel about three times longer than the .308, so any shot placement error is magnified.” Reeve recently headed to Wisconsin, where he will compete for a spot on the 2011 USA Palma team. Reeve has been a USA Palma Team member in the past, and we wish him luck in the team selection matches.

Permalink Competition, News 1 Comment »
June 5th, 2009

Father's Day Bargains at MidwayUSA

MidwayUSA recently released its June Promotional Flyer. There we found some super deals just right for Father’s Day (assuming of course your father likes to shoot).


MidwayUSA has knocked twenty bucks off the price of a complete, oil-finished walnut stock set for the M1 Garand. Pick up a Garand rifle from the CMP and dress it up with new Boyd’s furniture.

MidwayUSA has discounted the Tipton Gun vise down to $37.99. Though lightweight and easy to move around, this unit holds guns securely and has handy slots for cleaning implements and solvent bottles. Rubber padding protects your gun’s finish. This is a unit our Editors use on a daily basis.

Lyman makes the best trigger pull gauge you can buy. This provides a repeatable measurement from 12 pounds down to less than one ounce. There is a large, easy-to-read display, that can switch between English and metric units. This is the pull gauge our Editors use for testing.

We really like Midway’s nickel-plated spire point jags. The nickel plating eliminates the possibility of “false readings” from copper solvents. We also like the multi-caliber jag kits. These give you a complete set of jags (from .17 to .45 calibers) in a fitted flip-top plastic box. Right now MidwayUSA is offering a Combo deal for $29.99 (item 112-072). This gives you a dozen (12) nickle-plated jags, plus a collection of premium bronze bore brushes. If your dad has a diverse gun collection (with lots of different calibers), this would be a great gift.

Permalink News Post comment »
June 4th, 2009

"Girls with Guns" Biathlon Program in Alberta, Canada

Our recent story on the Anschütz Model 64-R Biathlon rifle prompted interest in the Olympic sport of biathlon, which combines cross-country skiing with rimfire rifle marksmanship. While most of the top shooters are from Europe, there are many dedicated biathletes in Canada and the USA.

In the video below, Nicki Pacas, a former Canadian National Team biathlete, talks about the “Girls with Guns” biathlon program she leads in Canmore, Alberta, Canada. Nicki’s “Girls with Guns” program has attracted many new female biathletes who enjoy the comradery and the unique challenge of skiing and shooting. Nicki explains: “I enjoy the challenge of biathlon. The best way to describe going from skiing to shooting is, say you just did a 100-meter sprint and a whole bunch of pushups and then you need to try and thread a needle. It’s really, really hard… it’s a total shift in concentration.”

With the help of top Nordic coaches, Nicki has introduced dozens of young women to the sport of biathlon. For many participants this was their first experience shooting rifles. Nicki adds: “It’s so great to see more girls participating in [biathlon]. I think because it’s a girls-only program it’s more appealing…. I think if you give girls the opportunity to have a healthy lifestyle… they’re more likely to make really positive decisions in the future.”

NOTE: You should definitely watch this professionally-produced video. Nicki is a great spokes-person for her sport.

YouTube Preview Image
Permalink - Videos, Competition 1 Comment »
June 4th, 2009

Rimfire Benchrest Stock Sources

We often hear the question: “Where can I get a quality bench stock, with a wide, flat fore-end, for a rimfire action?” First, McMillan can inlet their popular Edge and Hunter benchrest stocks for rimfire actions such as the Hall, Rem 40X, and Turbo. Second, if you’re looking for a nice wood stock, contact Don Stith in Troutville, Virginia. Don’s St. Louis Plains Rifle Co. offers match-proven wide fore-end designs, inletted for most of the popular rimfire target actions: Anschutz 54, Hall, Remington 37, Remington 40X, Remington 540 or 580, Sako Finnfire, Suhl, Turbo, Ultralight, and Winchester 52. Stith also sells a rimfire sporter stock with a narrower fore-end. This is designed to meet the regulations of IR50/50 Sporter Class

Stith offers a variety of fancy woods, as well as colored laminates. Stock weight depends on your choice of wood. Butternut, Catalpa, and Sassafrass will weigh 1.5 to 1.75 pounds. Walnut and Curly Maple are 1.75 to 2.25 pounds and the laminates are approximately 2.5 pounds.

stith stocks

Stith “Class BR” rimfire stocks start at $220 for laminates, and $200 for solid wood, but fancy or highly figured woods can cost quite a bit more. Call Don for a quote. The popular “Predator” design (known for its great tracking) starts at $250.00. Don’s rimfire benchrest stocks are fully shaped, sanded to 120 grit, and inletted but no finish is done and they are shipped without buttplates.

stith stocks

Permalink - Articles, - Videos 1 Comment »
June 4th, 2009

G.A. Precision Launches New Website with Enhanced Info

G.A. Precision builds some of the best tactical rifles currently available, such as the Crusader model shown below. The long-awaited updated and enhanced G.A. Precision website launches today, 6/4/2009 at 12:00 noon CST. G.A. Precision’s owner George Gardner (profile below) tells us: “The new site has enhanced features and navigation and a great deal of helpful new information. It’s still a work in progress. During the rest of this year we’ll add more pages…. You can also upload pictures of you and your GAP rifle to the site, as well as testimonials.”

G.A. Precision

Find Hidden Features for a Prize
George adds: “For the unveiling there are 8-10 ‘Easter Eggs’ on the new site. Some are clickable links while others are just hidden images. The first guy to email me with all of them will win a GAP/Strider Knife (retail value $375.00). The winner will be announced on this and other gun forums.”

George Gardner G.A. Precision

History of G.A. Precision
G.A. Precision was founded and started initially by George Gardner alone as a means of building competition rifles for local High Power and long range shooters. G.A. Precision has grown during the past ten years, moving through three different locations and adding 13 more employees. G.A. Precison currently builds rifles for over 300 law enforcement agencies, including FBI HRT Team Quantico, Chicago P.D. SWAT, Illinois State Police HRT Team, Cook County (Chicago) HBT. Coral Springs P.D., Florida, Kansas City MO P.D. TAC, Kansas City, KS P.D., Denton TX, Richardson TX. Dane County WI, and many others. G.A. Precision also specializes in building competition rifles for the increasingly popular long-range tactical matches held around the country. George Gardner is an active outdoorsman and shooter, regularly competing with the rifles he builds.

G.A. Precision Gladius
GAP Gladius with Manners T2A stock, 18.5″ Bartlein barrel, Nightforce F1

Permalink News Post comment »
June 3rd, 2009

Speed Case-Prep with Lithium-Ion Powered Screwdrivers

Many folks use battery-powered screwdrivers for case prep work. A powered screw-driver is a convenient, inexpensive power source for case-neck chamfering and other tasks. However, if you have been using an older screwdriver, you may want to consider an upgrade to the latest generation of rechargeable screwdrivers with Lithium-Ion batteries. The Lithium-Ion powerpack is a new technology that significantly outperforms the old NiCad batteries.

Lithium Ion screwdriver

The new Li-Ion screwdrivers are much smaller, hold their charge for longer periods of time, and the batteries will last longer. These units cost about $30-$50, are lightweight, and fit in the palm of your hand. We think this pistol grip design is easier to hold that the first-generation cordless screwdrivers. They certainly run longer… that’s for certain. We get about two hours on a charge. If you buy a spare battery you can just swap it in and keep working.

The Li-Ion Black & Decker SmartDriver™ powered screwdriver comes complete with 20 accessories for $48.29. Black & Decker claims its compact screwdriver delivers 20% more power verses a regular rechargable screwdriver and lasts longer.

Toolbarn has a SKIL Cordless Palm Size Screwdriver that comes with a 34-bit accessory kit, for $42.00. The tool is very light and comfortable to hold. SKIL claims the Lithium-Ion battery will hold its charge for up to 18 months.

Permalink New Product, Reloading Post comment »
June 3rd, 2009

Leica Introduces New ER Riflescopes

Leica is famous for its rangefinders, spotting scopes, and binoculars (and of course cameras). Now Leica is moving into the riflescope market. Leica has announced two new “ER” scopes for hunters. Initially, Leica will offer 2.5-10×42 and the 3.5-14×42 models. Both have 30mm maintubes, quarter-MOA clicks, and AquaDura lens coatings. Notably, both scopes have a long (10 cm/3.9″) eye relief. This extended eye relief allows the scopes to be mounted well forward so a shooter need not worry about recoil, even when shooting large magnum calibers.

Leica ER rifle scopes

SWFA has followed the development of the new Leica ER scopes. SWFA believes the Leica ERs will be some of the finest hunting scopes on the market, good enough to rival the Swarovski Z6, and Zeiss Victory series. Leica will offer five reticles, shown below. In addition, you can order the ER scopes with a neutral fast reticle adjustment (ASV), that adjusts the the impact point to different distances. Leica plans to start shipping its new ER scopes in October 2009. SWFA is listing the 2.5-10×42 at $1899.00 and the 3.5-14×42 at $1999.00, but those prices are subject to change.

Leica ER rifle scopes

Permalink New Product, Optics 1 Comment »
June 2nd, 2009

New Website for Match Cartridge Snap Caps

A couple months back, we announced that Eric Kennard had started producing snap caps for match cartridges such as the 6mmBR and 6XC. They say that necessity is the mother of invention, and that was true here. Eric started making snap caps because nobody produced such a product for the match chamberings that he shoots. Eric’s match-cartridge snap caps have been so popular that he has expanded his product line to include 12 different cartridges. Plus Eric has recently launched a new website, HarbourArms.com, that features a handy shopping-cart system, so you can easily order all the snap caps you need.

Harbour Arms Snap Caps

12 Cartridge Types Now Offered
Harbour Arms Precision Snap Caps are available in .223 Rem, 6mmBR, 6BRX, 6mm Dasher, 6XC, 6-6.5 x 47 Lapua, 6.5 x 47 Lapua, 6.5 x 284, .260 Remington, .308 Win, .300 Win Mag, and .338 Lapua Magnum. Each set of two snap caps is precision-crafted from aluminum and costs $12.95 for two snap caps.

Cartridges Offered:

.223 Rem

6mmBR

6BRX

6mm Dasher

6XC

6-6.5 x 47 Lapua

6.5 x 47 Lapua

6.5 x 284

.260 Remington

.308 Win

.300 Win Mag

.338 Lapua Mag

Harbour Arms Snap Caps

Who needs a Snap Cap? Anyone who dry fires. It has been said that dry-firing is the best form of practice. Dry-firing allows one to check for proper natural point of aim, position, and trigger control. Many of the custom rifle actions use two piece, thin, or titanium firing pins. These pins are susceptible to fracture or breaking when dry-fired too much. Shotgunners using custom trap or skeet guns would never dry-fire their expensive arms without a Snap Cap to protect their firing pins. Nothing is worse than your firing pin breaking during a match!

Permalink News 4 Comments »
June 2nd, 2009

Follow Shooting Sports Summit with Streaming Webcasts.

The National Shooting Sports Foundation’s 2009 Shooting Sports Summit is under way in Weston, Florida. Over the next two days, more than 150 leaders from the firearms industry, wildlife conservation groups, and shooting sports organizations are joining members of TaskForce 20/20 to devise strategies to increase participation in hunting and the shooting sports by 20 percent over the next five years. Several key segments of the summit are broadcast live via webcast (click links below).

LIVE Summit Webcasts |Webcast Schedule for Shooting Sports Summit

Steve Sanetti, NSSF

The keynote speech is being delivered by Clyde Fessler, former vice president of business development for Harley Davidson who is credited with spearheading the re-branding of that company and broadening H-D’s appeal to younger generations. That success story should resonate with this audience who will be considering ways to attract more youth to participate in hunting and target shooting.

Following the Fessler speech, the summit kicks off with its first presentation — Youth Programs — one of five areas that attendees will focus on during the two days here. Three areas — Youth Programs, Recruitment and Retention/Reactivation–will be considered today, with two more — Access/Opportunity and Coordinating Efforts — tomorrow. Each area has a strategic initiative and three to four “questions” that will be discussed in roundtable meetings. Each roundtable will generate suggested action plans that all attendees will have a chance to vote for through an electronic poll.

Photo copyright NSSF, all rights reserved, used with permission.

Permalink News Post comment »
June 1st, 2009

New 6BR: Love at First Group

Many Forum members are putting together their first custom or semi-custom precision rifle this season. These folks often ask us, “What kind of accuracy can I expect from my first 6mmBR?” Of course there are no guarantees, but a 6BR with a good custom barrel, good chambering job, and a nice bag-riding stock should be able to shoot well under half-MOA (1/2″ at 100 yards), maybe even approach quarter-MOA. Forum member Eric (aka Exercion) provided this interesting report on his new 6BR:

Love at First Group by Eric
Well, I took my new stick to the range for the first time today. It features a Savage single shot target action in RBLP configuration, 28″ Broughton 5C barrel, Sharp Shooter Supply Dogtracker stock with adjustable buttplate, and Nightforce scope.

Now, I have never owned a 6mmBR before, but from reading here and seeing them in action I decided to build one. Its main purpose in life is mid-range F-Class shooting, mainly at 600 yards, and if the winds are favorable, at 1,000. (I already have a 6.5 for “normal” conditions.) I am most grateful for all the info here, and especially the load data. I picked Reloder 15 under the 107gr SMKs for my first loads, starting at 29.0 grains, and proceeding in half grain increments to 30.0 grains. Jumped the bullets 0.015″. Ran the Lapua brass through the neck-sizer bushing die, and was concerned at the force needed to pull the expander button through the virgin brass necks but figured this was a once per case deal to round them out for initial loading. When I measured the runout on the loaded rounds, I was appalled as they had more wobble than anything I personally loaded before, but I kept reminding myself that this was the fireform/chronograph/scope and gun trial stage.

Three Shots in 0.335″ Edge to Edge
So off to the range this morning. No wind here at the house, so life was good … until I got to the range and the wind started to blow. So I set up everything, leveled the gun in the bags, leveled the scope to the gun, made sure the bore was in the center of the chronograph and bore-sighted. First couple of rounds were off to the right, so I moved the scope over 5 MOA and fired another shot, hit paper with it, so I shot 2 more and stopped because I couldn’t tell what was happening. A walk down to the hundred yard berm revealed a nice hole that measures 0.335″ at its absolute widest edge to edge! That’s the smallest 3-shot group I’ve ever fired with anything. I am so in love!

Savage 6BR

SDs Improve with Heavier Charge and Run-out Disappears
I kept going ’til I worked my way through my first 100 rounds.Given the conditions, I was more interested in the chrony numbers than group, (though 20-shot strings yielded nice quarter-sized holes) and found that as my charges got heavier the SD was coming down (the 30 grain load gave me an SD of 9). I can’t wait to see what will happen with some load tinkering, as well as bullet trials (have Bergers, Hornady A-Maxs, and Lapua Scenars waiting for the next trip). Also, as I had hoped, fire-forming “cured” the run-out problem. I ran the fired but un-sized cases over my concentricity tool and saw less than 0.001 runout on the necks now.

Permalink - Articles, Reloading 1 Comment »