Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









April 28th, 2009

Robert Hoppe Wins 2009 NBRSA 600-Yard Nationals — Full Results Available

Taking first-place overall, Robert Hoppe was the big winner at the NBRSA 600-yard Nationals (Sloughhouse 600). Robert was shooting a 6mm Dasher (6BR Improved) with (reportedly) 103gr Spencer bullets. Robert had previously set a 600-yard small group record with his Dasher and 105 A-Max bullets. In the Interview below (from the 2008 Sloughhouse 600), Robert Hoppe gives tips on loading for the 6 Dasher:

YouTube Preview Image

Second Place overall went to Billy Copelin (also shooting Dashers in both Light Gun and Heavy Gun), and Third Place went to past 600-yard Champion Don Nielson (also shooting a Dasher in LG and HG). Don also won 12-Target Score. East-coaster Eric Stanton took 4th shooting a borrowed 6BR while Tommy Johnson rounded out the top five.

NBRSA 600-yard Nationals
Overall Winner Robert Hoppe (holding plaque), with Match Director Craig St. Claire (far left).

CLICK HERE to download Complete NBRSA 600-Yard Nat’ls Match Results (MS Word file).

Though conditions were very difficult (shifty variable winds with horrendous mirage), Forum member Roger Amos set a new 3-target, Light Gun score record of 145-4X. Last Year’s NBRSA 600-yard Champ Jerry Tierney told us: “Conditions were really tough. Big changes in velocity and direction. You might get a good group but chances are it would not be centered. Mirage was bad. Many guys had trouble staying on paper when the conditions were the worst.” Despite the conditions, Tierney recorded the best Light Gun 6-Target Group Agg, an impressive 2.589″.

Lynn Dragoman provided this report, on Benchrest Central: “The shooting was very tough. We had plenty of switchy winds and so much mirage my 12-42 Nightforce never got off of 12 power. Lou Murdica lent Eric Stanton a 6BR [belonging to Connie, Lou’s wife] with ammo Lou loaded up. Eric won a box of plaques and shot the smallest LG group of the match [1.407″, (48-0X). Barry Bluhm, shooting a 6-6.5×47 had the Heavy Gun 10-shot small group, 2.513″, (92-1X)]. Turnout was 50 shooters despite the depression we are seeing in the economy and a good time was had by all in attendance. It doesn’t get much better than three days shooting on the bench next to Lou Murdica, Don Nielson, and Eric Stanton. The new March 36-55X is a very nice scope. A big thank you goes out to our new Match Director Craig St. Claire. He ran it like a true pro. The scoring was done by Gary Childs and Jim O’Connell and the results were done before anybody had finished eating lunch.”

NBRSA 600-yard Nationals

Many leading manufacturers supported the NBRSA Nationals/Sloughhouse 600 as sponsors. Bill Shehane of D&B Supply donated a very nice Tracker stock. Mac Tilton of MT Guns donated a $250.00 discount certificate for new Barnard action. Mac specified that this should go to one of the “non-podium” shooters, and Rick Duncan was the lucky fellow receiving the certificate. Other participating sponsors included: Bartlein Barrels, Cabela’s, Dewey Products, Forster Products, Russ Haydon, Krieger Barrels, Lee Reloading, MidwayUSA, Shilen Rifles, and Redding Reloading.

Photos by Barry Bluhm. Results provided by Jim O’Connell.

Permalink - Videos, Competition Post comment »
April 28th, 2009

First 2010 SHOT Show Newsletter Offers Travel Info

The first edition of NSSF’s SHOT Show Blast for the 2010 show in Las Vegas is now online. Featured are details on the latest SHOT Show survey results, a look at the new venue for 2010 and information on how to make travel plans for the show.

NEW Location for Vegas SHOT Show
The 2010 SHOT Show will NOT be held at the Las Vegas Convention Center as in years past. For 2010, SHOT Show will be housed in the Sands Expo Center (MegaCenter), located next to the Venetian hotel on the Vegas Strip. The main entrance to the show is on Sands Ave., diagonally northeast of the Venetian.

2010 SHOT Show MegaCenter

It’s not too early to start planning for the show, which runs Jan 19-22, 2010. Blocks of rooms are already selling out at some hotels. While the Venetian/Palazzo is very, very expensive, just south of the MegaCenter are the Harrah’s Hotel/Casino, the Imperial Palace, and the Flamingo. Harrah’s is probably the best choice of the three, but rooms are selling quickly. There are still rooms available in the Imperial Palace for under $50.00 per night. However, this is an older hotel lacking the amenities of most modern Las Vegas hotels

To book rooms for the 2010 SHOT Show, you can log on to the SHOT Show Travel Desk. This travel service offers rooms in 19 major Las Vegas hotels, offering a “best rate pledge.” We found the SHOT Travel Desk rates to be good, but sometimes lower prices could be found on discount sites such as Hotels.com and Priceline.com. It pays to shop around.

Permalink News 1 Comment »
April 28th, 2009

ShootingUSA Television Visits CCI Rimfire Factory

Ever wondered how and where rimfire ammo is produced? The CCI plant in Lewiston, Idaho is the main production facility for CCI and Federal rimfire cartridges. This plant also produces Hornady-brand 17 Mach 2 and 17 HMR ammo. This week, ShootingUSA visits CCI’s Idaho ammo factory during the TV show’s “Sighting In” segment. ShootingUSA’s camera crew meets with production engineers and explores the many options available among .22 rimfire ammo. CCI’s Lewiston, Idaho plant produces four million rounds every day in a wide variety of velocities and bullet designs and weights.

CCI Rimfire ammo

Rick Stoeckel, CCI Ammunition Brand Manager, explains the many options offered in rimfire ammo: “The rimfire shooters today — they’re hunters, they’re plinkers, they’re target shooters. And varmint shooting is a big deal today.” CCI offers a variety of different options, Stoekel says, so “you can basically hunt, shoot targets, [do] everything with a rimfire gun.” Working with the ammo experts at CCI, during this week’s show, ShootingUSA tests various choices of .22 ammo for both accuracy and performance on game.

CLICK HERE For BALLISTICS INFO for all CCI Rimfire Ammunition.
(Once on this page, select “View Details” for the particular ammo type.)

Cowboy Action World Championships Coverage
During the same April 29th episode this week, ShootingUSA covers the 2008 “SASS End of Trail” — the World Championship of Cowboy Action Shooting held at Founders Ranch outside Albuquerque, New Mexico. End of Trail has become a significant tourist event, drawing thousands of visitors from across the United States.

CLICK HERE to visit Single Action Shooting Society Website.

Photos courtesy ShootingUSA, © 2008, TIER ONE MEDIA, LLC. All Rights Reserved

Permalink - Videos, News Post comment »
April 27th, 2009

Beyond the Bulletin — Check out our Forum and Articles

We’ve learned that many first-time visitors to AccurateShooter.com may come in via a link to the Daily Bulletin rather than through our home page. As a result, they may not be aware that there is a wealth of other content available to our readers. Our Shooters’ Forum, with nearly 8,000 registered members, is one of the best places on the web to discuss precision shooting and advanced reloading. We also offer FREE Forum Classifieds. On the editorial side, AccurateShooter.com offers hundreds of pages of content, with thousands of photos. Our Cartridge Guides are considered definitive sources of tech info for popular match calibers, and our Guns of the Week articles provide in-depth reports on outstanding custom rifles, most of which have competition pedigrees. In addition, we offer videos, gear reviews, book reviews, an event calendar, and even FREE downloadable targets.

If you’re a new visitor to AccurateShooter.com, you should check out all that we have to offer. There are hundreds of informative articles to read … and they’re all free.

AccurateShooter.comAccurateShooter.com Features:

Shooter’s FORUM

FREE Classified Ads

ARTICLES Archive

CARTRIDGE Guides

FREE Targets

GUNS of the Week

TECH Articles

Gun VIDEOS

Gear Reviews

Book Reviews

Event CALENDAR

COMPETITION Resources

Permalink News, Reloading, Tech Tip Post comment »
April 27th, 2009

NSSF Offers $250,000 to Clubs to Recruit and Retain Shooters

The National Shooting Sports Foundation (NSSF) is offering $250,000 in grant money for shooting ranges through NSSF’s 2009 Shooting Range Grant Program. The grant program is designed to help public and private shooting facilities jumpstart their recruitment and retention efforts. “The best way to increase participation is to enhance and promote shooting opportunities at the local level,” said Melissa Schilling, NSSF recruitment and retention manager. “We’re looking for unique proposals that move the needle on recruiting new shooters, attracting lapsed shooters back to the range and increasing opportunities for active shooters.” The projects will serve as pilot programs, which, if successful, can be used by other facilities across the country.

Project applications will be accepted on an ongoing basis in 2009, and the funded program must be completed by February 1, 2010. A total of $250,000 will be available through the program. Visit RangeInfo.org for program details. That site also includes profiles of successful 2008 grant projects.

CLICK HERE to Download 2009 Grant Application Form

The NSSF noted that this grant program is NOT intended for land purchases, for building or improving structures (such as club-houses), or for acquisition of range equipment and supplies. A winning grant proposal will focus on bringing new shooters to the sport and reviving the interest of shooters who are currently inactive. The NSSF also favors programs that will allow active shooters to try new disciplines. To learn more about program objectives and grant selection criteria, visit RangeInfo.org.

NSSF Gives $499,060 to States
In related news, the NSSF announced today it would donate nearly half a million dollars to nine states for the purpose of promoting hunting. In 2009, the NSSF Hunting Heritage program will allocate $499,060 to these state agencies: Arizona Game & Fish Department ($82,500), Colorado Div. of Wildlife ($22,000), Florida Div. of Hunting ($58,620), Idaho Dept. of Fish & Game ($73,500), Maryland Dept. of Natural Resources ($27,500), Michigan Dept. of Natural Resources ($66,200), Oregon Dept. of Fish & Wildlife ($80,000), Virginia Dept. of Game and Inland Fisheries ($78,500), Wisconsin Dept. of Natural Resources ($10,240). Since its inception seven years ago, NSSF’s Hunting Heritage Partnership program has contributed more than $3.3 million in support of projects managed by state natural resource agencies.

“Hunting faces challenges that are often state-specific, and these grants from the National Shooting Sports Foundation help make possible programs that state agencies might not otherwise be able to provide,” said Steve Sanetti, NSSF president and CEO. “This year’s recipients are right on target with initiatives addressing access issues and encouraging inactive hunters to go afield once again.”

Permalink News Post comment »
April 26th, 2009

Outstanding Range Box from MTM Case-Gard

A good range box is a truly essential piece of kit. Among the many range boxes available, the MTM model RBMC-11 Range Box leads the pack in terms of versatility. It is rugged, it has plenty of storage space, plus it doubles as a handy cleaning station. This Editor has used the MTM Range Box to clean rifles and as a “range expedient” rifle holder when adjusting scopes and tensioning action screws. It’s a good product that does the job.

MTM Range Box

Fitted Cleaning Cradles
The key feature setting the RBMC-11 apart from most range boxes is the rubber-coated cradle system. Wide enough to fit a 3″-wide fore-arm, the cradles slide into vertical slots on either end of the box. This allows your range box to serve as a stable maintenance station. The RBMC-11 is really pretty stable in this role, and the cradles won’t mark your stock. The cradles even feature slots on each side to hold your cleaning rods when not in use. The MTM Range Box is secure enough to stay in place when you’re brushing the barrel. However, if you’re working on a carpeted bench top, you may want to keep one hand on the box when running a cleaning rod through the bore, just to ensure the box doesn’t slide.

MTM Range Box

Versatile Upper Tray with Dividers
The MTM Range Box has two major components — the box base (with cradles), and a large upper tray with hinged top and carry handle. This large upper tray clamps securely to the bottom unit for transport. The top tray has a long section that holds cleaning rod guides, long brushes, grease syringes and the like. There are two, clear-plastic fitted divider trays. These will hold your patches and jags, plus comparators, ring wrenches, and other small tools.

MTM Range BoxWhat Might Be Improved
Though we really like the MTM Range Box, it’s not perfect. First, we wish the box was a bit deeper, to have added carrying capacity. The dimensions of the MTM Range Box are: 25″ long x 11.5″ wide x 8.75″ high. We’d like to see it 12″ high/deep to allow larger solvent bottles to stand upright and to provide more space to carry tools and shooting muffs. However, it is deep enough to hold the large 100-round MTM cartridge boxes that are popular with many shooters (see photo at right).

The cradles are very nicely designed, and will hold your rifle securely without marking the stock. However, we’ve found that sometimes the rear cradle grips the gun so well that the cradle slides out as you lift the gun up. This is not a big deal, but it does demand a little extra attention when you’ve finished cleaning. We really like the twin clear plastic dividers that fit into the large removeable top-tray, but we wish the dividers had individual hinged tops. This would keep patches and small parts more secure.

The MTM Range Box costs about $50.00 at most vendors. CLICK THIS LINK to order from Amazon.com for $48.95: MTM® Shooting Range Box.

(FYI, Amazon.com rebates a portion of the purchase price from each sale to AccurateShooter.com. This helps support this website.)

Permalink Gear Review, New Product Post comment »
April 26th, 2009

Zeiss Conquest Refurbs on Sale at MidwayUSA

Zeiss Rifle scopesIf you’re looking for a 1″-diameter scope for hunting, varminting, or general paper-punching, Zeiss makes some of the best available. The less expensive Conquest line of riflescopes have impressed us with their very clear, sharp glass, and excellent controls. Unfortunately, Zeiss Conquest prices have climbed in recent years. For example, the excellent Conquest 6-20x50mm retails for nearly $200 more than it did originally.

You can’t go back in time, but MidwayUSA is offering refurbished Zeiss Conquest scopes at big savings off regular prices. These scopes all feature etched reticles and rugged 1-piece main body tubes. Here are some of the deals currently offered on Zeiss “Certified Refurbished” scopes (with full factory warranties):

Zeiss MC Conquest 3-9x50mm, Matte, Z-Plex Reticle
Product #: 151785 | Price: $479.99 Sale ($120.00 off retail)

Zeiss MC Conquest 3.5-10x50mm, Matte, Rapid Z-600 Reticle
Product #: 714963 | Price: $659.99 Sale ($165.00 off retail)

Zeiss MC Conquest 4.5-14x44mm Side Focus, Matte, Z-Plex Reticle
Product #: 993333 | Price $639.99 Sale ($160.00 off retail)

Zeiss MC Conquest 6.5-20x50mm, Matte, Side Focus, Target Turrets, Z-Plex Reticle
Product #: 145597 | Price: $799.99 Sale ($200.00 off retail)

Zeiss Conquest rifle scope

NOTE: Certified Refurbished Zeiss MC Conquest Rifle Scopes may have ring marks or small scratches on the body, but none of these slight blemishes will affect the function of the scope. Zeiss Conquest Rifle Scopes are covered by the Zeiss Limited Lifetime Warranty. Quantities are extremely limited.

Permalink Hot Deals, Optics Post comment »
April 25th, 2009

Stock Designs for Prone High Power Shooting

German Salazar, a top prone shooter and contributor to AccurateShooter.com and DesertSharpshooters.com, has crafted an excellent article on stock design. Writing for Precision Shooting magazine, German compares traditional stocks, such as the MasterClass Prone, with more modern, modular designs, such as the Eliseo TubeGun and Ross Precision stock. German, who shoots match rifles built with each type of stock, explains the pros and cons of the different designs, and explains how to optimize the stocks’ adjustments for best fit and function. German also explains the best methods to attach and bed an action to each of the designs.

CLICK HERE to Read Full Story by Salazar

Salaza highpower stock review

Salaza highpower stock review

For a limited time, German’s excellent article is available online, courtesy of Precision Shooting Magazine. If you’re a highpower shooter, or you are interested in the design, construction, and engineering of modern competition stocks, this article is a “must-read”.

Salazar highpower stock review

Permalink News Post comment »
April 25th, 2009

FREE Ballistics Calculators And Data Charts from Canada's NFA

Ever wondered what twist rate is required to stabilize a particular bullet? Or would you like to see how changes in spin rates (rpm) affect bullet stability? Well thanks to our friends from Canada, you’ll find helpful formulas online that answer many questions about external ballistics.

The Ballistics Page for the Canadian National Firearms Association (NFA) website offers a variety of useful programs and data charts created by Peter Cronhelm. These include:

Caliber Twist Rate Chart

Greenhill Formula Twist Calculator

Bullet Stability Calculator (requires MS Excel)

Ballistic Coefficients Chart (MS Word), (Or DOWNLOAD HERE.)

Ranging Ballistics Computer (Scroll to bottom of page.)
This exterior ballistics computer works in conjunction with range data as well as computing a conventional drop and windage chart. Using an FFP (Final Firing Point) and multiple TRP’s (Target Reference Points) the system will simultaneously calculate Drop and Windage data for up to 30 TRP’s 360 degrees around the FFP. Windage is corrected for the TRP direction compared to the primary wind direction. The spreadsheet consists of six individual pages. Each page performs a distinct function and contains all the information required to complete a shot at a target or targets. The entire system can be used in any laptop or handheld computer capable of running MS Excel or Excel CE.

CLICK HERE to download Ranging Ballistics Computer (requires MS Excel)

Rimfire Ammo Comparison Table
Canada’s NFA even provides a detailed table with bullet weights and velocities for over 100 varieties of 22LR Rimfire ammunition from Aguila, CCI, Eley, Federal, Fiocchi, Lapua, PMC, Remington, RWS, and Winchester. This Rimfire Ammo Table is a “must-have” resource for any smallbore shooter. Shown below is the section for Lapua:

Permalink - Articles, Tech Tip Post comment »
April 24th, 2009

2009 CMP Rules Update Available Now

The 2009 update of the CMP Competition Rules for Service Pistol, Service Rifle, and As-Issued Military Rifle is now available online. The 13th edition (2009) CMP Competition Rules can be downloaded (for free) from the CMP website. Printed copies of the rulebook may also be purchased for $3.00 each from CMP Competitions, P. O. Box 576, Port Clinton, OH 43452.

CLICK HERE to download 2009 CMP Updated Rules.

In the downloadable file, all 2009 rule changes are underlined so they can be identified. The CMP has also posted an article summarizing the key 2009 rule changes.

Important CMP Rule Changes for Garands
One significant 2009 rule change stems from the CMP’s continued commitment to start rapid-fire stages from standing. Until this year, NRA range procedures could be used in CMP matches, but now that the NRA has eliminated the requirement to start rapid-fire stages from standing, NRA range procedures can no longer be used. As a result, the CMP had to develop its own rules, range procedures and commands. Thus, a foundation requirement in the CMP rifle rules (Rules 8.1.5 and 9.1.10) is that competitors must start all rapid-fire stages from standing.

There is also a new required procedure for Garand shooters in the rapid fire stage. Shooters may still load while standing. However, competitors are required to push down the rounds in the clip and CLOSE their BOLT over an empty chamber before dropping from standing to prone. When targets rise from the pits (or the command TARGETS is given), shooters must drop down into position, then cycle the bolts on their rifles to chamber their first round and begin the rapid-fire stage. The goal here is to “to completely eliminate any possibility of a shooter moving from standing to the firing position with a round in the chamber.”

NEW GARAND Rapid-Fire LOADING PROCEDURE. Competitors with M1 Garands must “close bolts on an empty chamber” by: 1) inserting the clip and 2 rounds in the magazine; 2) pressing the clip and 2 rounds all the way down to release the operating rod; and 3) allowing the bolt to over-ride the top round, so the bolt closes on an empty chamber. The bolt may not be cycled to load the first round in the chamber until after the competitor is down in position.

The 2009 updated Rules also provide new guidelines for the Garand Unlimited class. CMP Games rifle categories (Rule 6.4.1) now include an Unlimited Garand category for shooters with National Match, .308, commercial and glass-bedded Garands. NOTE: The National John C. Garand Match at Camp Perry will have both As-Issued and Unlimited Garand categories.

Permalink News Post comment »