Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









April 22nd, 2009

High-Quality Shooting Accessories from Joe Cowan

Machinist Joe Cowan of Altoona, PA offers some nicely-designed products for F-Class and Benchrest shooters. These products would also be useful for Varminters who use pedestal rests. To order Cowan’s F-Class rest feet or BR Loading Block shown below, contact Joe Cowan via email: cowanhaus [at] verizon.net.

F-Class Rest Feet
Cowan sells large-diameter, heavy-weight front rest feet for F-Classers. Weighing 2.2 lbs each, the 3.5″ diam. x 1″ thick feet are machined from solid steel. A large conical point is machined on the bottom of each foot to improve stability on uneven ground. The rest feet are drilled and tapped for 3/8-16 thread. The rest feet can attach directly to the threaded height-adjusting shafts on your rest. Joe also provides a machined plug screw with each foot. Cost for the 3-disk set is $35.00, plus $10 flat rate shipping per order.

Cowan F-class rest feet

Benchrest Speed Loading Block
Here’s a cool product that puts your ammo right next to your rifle’s loading port for faster cartridge cycling. The Delrin shell block is attached to a flexible, jointed “neck” allowing you to adjust the height and angle of the block. The neck is secured to an aluminum mounting bracket that clamps under the vertical adjusting screw on the rear-most rest leg.

Cowan loading block

The white Delrin shell block hold 15 rounds, with 5 slots in a top row and 10 slots in two lower rows. The shell blocks are tailored to a particular cartridge, but they can be swapped in and out when shooting different calibers. Currently, Cowan offers shell blocks for: .222/.223, PPC, BR, 6.5-.284 and Short Mag. Joe may add 22LR rimfire shell blocks if there is sufficient demand. Cost for the whole system, including cartridge block, twisty neck, and mounting bracket, is $65.00 plus $9.00 shipping. Extra shell blocks are $20 each.

Permalink New Product 8 Comments »
April 21st, 2009

9th Circuit Rules that Second Amendment Applies to Actions of States and Local Governments

Nordyke v. King 9th Circuit

The Ninth Circuit Court of Appeals ruled yesterday that the Second Amendment of the U.S. Constitution restricts the powers of state and local government as much as it does those of the federal government. A three-judge panel issued this ruling in Nordyke v. King (Alameda County). This is the first case where a Circuit Court has declared that the actions of states or municipalities are subject to the Second Amendment protections recognized by the U.S. Supreme Court in D.C. v Heller last year. (Other cases challenging state action on Second Amendment grounds are pending before the Seventh Circuit.)

In finding that the Second Amendment applies to actions of States, counties, and local municipalities, the 9th Circuit applied the due process clause of the 14th Amendment. The Circuit Court concluded “that the right to keep and bear arms” as a personal right has been recognized by the Supreme Court in Heller, and that this applies to the states through the Fourteenth Amendment’s due process clause.

Nordyke v. King 9th CircuitIn Nordyke v. King, the plaintiffs challenged an Alameda County ordinance that effectively prevented plaintiffs from holding a gun show at the Alameda Fairgrounds. Though the 9th Circuit acknowledged the existence of rights under the Second Amendment, the three-judge panel concluded that D.C. v. Heller was limited in scope, and only recognized a right of “armed self-defense in the home”. Accordingly, the Ninth Circuit ruled against plaintfiffs, and upheld the Alameda County ordinance, which banned possession of guns “on county property.” Disturbingly, the Ninth Circuit ruling attempts to carve out a “public property” exception to the Second Amendment. The Nordyke v. King opinion states that a gun ban on county property: “fits within the exception from the Second Amendment for ‘sensitive places’ that Heller recognized.”

We’re not certain that the U.S. Supreme Court would agree with the Ninth Circuit’s holding that a fairground was a ‘sensitive place’ where the Second Amendment, effectively, has no sway. If a state or county can ban guns at a fairground, then why not public parks, parking lots, bus stops and so on? This could lead to cities and counties declaring extensive “gun-free zones” within their boundaries. Ironically, public places such as parking lots may be exactly where citizens are most at risk of violent crime. And ask yourself this… what other Constitutional rights are geographically limited? Would a court dare to restrict the First Amendment so as to eliminate the right of free speech on public property?

CLICK HERE to Read Full 9th Circuit Decision (.pdf download).

Permalink - Articles, News 3 Comments »
April 20th, 2009

April Deals at Midsouth Shooters Supply

Some good deals are to be had among Midsouth Shooters Supply’s April Specials.

Barnes M/LE Bullets on Sale
Barnes Bullets has introduced a new line of Military Law Enforcement (M/LE) lead-free bullets. Based on technologies Barnes developed for military applications, this new line of bullets should be popular for self-defense, hunting, and the fast-growing Tactical market. Sale items include include the all-copper TAC-X™ rifle bullets and Barnes’ new RRLP™ (Reduced Ricochet, Limited Penetration) bullets. TAC-X are a solid copper projectile that provides controlled, double-diameter expansion — a good choice for hunters. The RRLP bullets feature a frangible, powdered-metal copper-tin core inside a guilding metal jacket. These open-tip bullets combine accuracy with explosive fragmentation.

Last but hardly least, Midsouth offers the new 50-Caliber TAC-LR™ Long Range bullets. These high-BC, solid-brass beauties are individually milled on CNC equipment. Two types are available, a long-nosed secant ogive style (035-51075) and a tangent ogive style (035-51076). Both 50-cal projectiles are priced at $32.90 for 20 bullets. That’s expensive yes, but still much cheaper than comparable milled 50-cal solids from “boutique” bullet-makers. Barnes’ 750gr secant ogive TAC-LR bullet has an amazing 1.070 BC.

TAC LR Barnes 50 Caliber

Allen 50″ Euro Gun Case
The Allen “Euro” is a quality 50″-long case with enough interior space to handle 29-30″ barrels. This deluxe case features a fatter/taller front section to fit guns with wide forearms or attached bipods. This is a very nice soft case for a long-barreled varmint rifle or F-Class gun with a larget scope. It features very thick foam padding (1.5″ per side) and multiple, velcro-closed external pockets. Midsouth Shooters Supply offers this case in hunter green (item 168-91550) for $35.09. Supplies are limited so don’t hesitate! A similar Allen-made case in blue or tan sold as the Remington Yukon.

Allen 50

Montana Xtreme Solvent with Free Bolt Grease
Though the end of April, if you purchase a 4 ounce bottle of Montana X-Treme bore solvent for $5.86, Midsouth will include a FREE syringe of X-Treme Gun Grease as no extra cost. The Gun Grease normally retails for about $4.50 buy itself. Every bolt-gun owner should have some grease in a syringe applicator to prevent galling of the lugs.

Midsouth Owner Interviewed
In related news, Midsouth Shooters Supply owner David King was recently interviewed by WKRN television in Nashville, TN. When asked about the current ammo shortage, King said this is the most accute shortage he can remember: “I’ve been doing this since the early 60s and it’s never been like this … The ’94 shortage was tough, but not like this.” In fact, King said it’s so bad one of his dealers sold more ammunition in one day than he did in all of 2007. According to King, the surge in ammo sales began after the Presidential election in November and has continued unabated due to concerns that Congress will impose new regulations on firearms, ammunition, and reloading components. King said ammo-makers are producing product as fast as they can but he expects in may take a full year before the balance of supply and demand situation returns to normal.

CLICK HERE to view David King interview (top right on new page)

Permalink Bullets, Brass, Ammo, Hot Deals Post comment »
April 19th, 2009

Joel Pendergraft Sets New IBS 1000-Yard Heavy Gun World Record

Pendergraft record Hawks RidgeYesterday, April 18th, Joel Pendergraft of Durham, NC put 10 shots into 3.048″ to set a new IBS 1000-yard Heavy Gun World record. Competing at Hawks Ridge, NC, Joel set the record with his big, 300 Ackley Improved HG fitted with an unusual water-cooled 12-twist, 4-groove Krieger barrel. Joel shot BIB 187gr flat-based bullets in Norma brass, pushed by a “generous amount” of Alliant Reloder 25 and Federal 210M primers.

This 3.048″ 10-shot group was a remarkable accomplishment, breaking one of the longest standing 1000-yard World Records. Bill Shehane commented: “This tops the NBRSA, IBS, and Original Williamsport Clubs’ all-time 10-shot Heavy Gun group records. Took a long time to do it and I for one know Joel did not back into it — he has worked harder than most the last 10 years to break this record. And just like John Voneida of the Original Williamsport Club who held this most prestigous record for so long, Joel is a super nice guy and a great competitor.”

Joel Pendergraft

Pendergraft’s fellow 1K competitors were quick to praise his accomplishment. Dave Tooley observed: “I still remember the day I suggested flat-based bullets to Joel and the laugh I got. Well he was laughing today. Couldn’t have happened to a nicer guy. Glad I was there to see it.” Posting on Benchrest Central, “4Mesh” wrote: “Couldn’t happen to a nicer guy! That gun showed some serious promise last year at the World Open and anything that cranks off targets like the one you shot there, has what it takes.” Jim Hardy added: “The new record is great but no better than the fine man who shot it. Everyone who knows Joel will say the same thing — he is one of the finest men you will ever meet. He lives the life, and walks the walk and has paid his dues in the 1000-yard BR game to get the record.”

Joel Pendergraft

Joel Pendergraft

Pendergraft was modest after his notable achievement: “Some of the words spoken are too kind. What makes this so very special is to be able to celebrate the accomplishment with all of my shooting friends[.] A good friend once said that records are shot when preparation and opportunity meet. I feel blessed to have personally had the opportunity. The preparation we can individually work on and acheive but the opportunity only comes to a few. Those of you that compete in longe range competition will know what I mean.”

Joel Pendergraft

Permalink Competition 8 Comments »
April 19th, 2009

American Shooters Compete at ISSF World Cup in Beijing

Competition at the second leg of the 2009 ISSF World Cup Series commenced in Beijing, China on April 18 and will conclude April 23. Sixteen U.S. rifle and pistol shooters will be competing in Beijing, which will be familiar ground for 2008 Olympians Jamie Beyerle (Lebanon, PA), Brian Beaman (Selby, SD), Keith Sanderson (San Antonio, TX) and 2008 bronze medalist Jason Turner (Rochester, NY). These four Olympians competed in the same venue at the 2008 Olympic Games in Beijing last August.

Jaime Beyerle ISSF Match

The U.S. is looking to add to their 2009 World Cup medal tally in Beijing, as Sanderson is coming off a silver medal win in Men’s 25m Rapid Fire Pistol in Changwon, Korea earlier this week. Sanderson was an Olympic finalist and record holder at the 2008 Games in Beijing. For updated news and results during the Beijing ISSF Rifle/Pistol World Cup, please visit the ISSF website. Daily results (with photos of winning shooters) are found on the ISSF Latest News Page.

Permalink Competition Post comment »
April 19th, 2009

B.R.A.T. Offers 6BR and 6BRX Uppers for AR High Power Shooters

BR Armament Technologies (B.R.A.T.) of Saluda, VA is currently producing AR uppers chambered for the 6BR and 6BRX cartridges. Unlike some other previous AR conversions for the 6BR cartridge, the BR15 uppers produced by B.R.A.T. do not merely use a .223-sized bolt opened up to fit the .308-sized rim of the 6BR case. Instead B.R.A.T. employs a different bolt design that is bigger, and significantly stronger in the lug area. Shown below is a .223-sized bolt (left) and a BR15 bolt from B.R.A.T. on the right.

6mmBR AR15 rifle

The B.R.A.T. BR15 upper receiver has been specifically designed to use the 6BR family of cartridges. It has a larger bolt, modified bolt carrier, modified upper receiver, larger barrel extension, and most importantly an all-new magazine designed specifically to handle the BR class of cartridges. All other parts are standard AR15. The folks at B.R.A.T. have developed their own magazines. These are 5-round center-feed dual column magazines that work with the 6BR, 6BR-derived cases (like 22 BR), and the 6BRX. Since the round feeds from the center, the mags can also be used for single-feeding.

B.R.A.T. is operated by two long-time competition shooters, both High Power High Masters, both Distinguished Riflemen, and both former captains of the U.S. Air Force Shooting team. President Eric Bellows has placed in the top 10 in the NTI and Presidents matches many times. Eric is former VT State Champion. Bill Walter, Chief Development Engineer, is former FL State Champion, Eliah Root team member, and is current military Palma Match record holder.

NOTE: We have not used or tested a B.R.A.T. upper or magazine. We are just passing on this information at the request of readers. You will find more product specs, and comparitive ballistics, on the B.R.A.T. website. Currently BRAT-15 uppers retail for $1390 with a Douglas barrel or $1550 with a Krieger barrel, chambered either as 6BR or as 6BRX. For another $100, B.R.A.T. offers uppers chambered in 22 BR, 6.5 BR, or 7mm BR. For more info, email 6BRrifles [at] bratrifles.com, or call (804) 824-7248.

6mmBR AR15 rifle

B.R.A.T. 6BRX Upper Receiver with 28″ barrel and RPA Tall Boy sight

Permalink New Product 3 Comments »
April 18th, 2009

Savage 6.5x55AI in Russo Fancy Maple Stock

Forum member Robert E. of North Dakota recently finished a winter project, profiled in our “Pride & Joy” Forum thread. The stunning McMillan A2-style stock was produced in Curly Maple by Joel Russo. The gun features a Savage RB/LP target action with a 30″ McGowen 1:8″-twist barrel chambered in 6.5x55AI. Robert installed the pillars, bedded the action, and finished the stock himself. Nice job Rob! The handsome gun sports a Sighton 6-24×50 scope held with Farrell 20moa base and rings.

6.5x55 Savage maple custom

6.5x55 Savage maple custom

The stock shape is classic McMillan “tactical”, but the gun is just too handsome to be called a tactical rifle. Maybe Robert has created a whole new category of rifle: “Glam Tac”. In any event, Robert has selected a great chambering for long-range hunting or target shooting and we expect this gun will be a shooter. (It’s still a virgin. Robert hasn’t put one round through it yet.)

For more info on custom wood rifle stocks, visit RussoRifleStocks.com or contact Joel Russo at (717) 805-0940, or jkrussos [at] comcast.net . This Editor spoke to Joel today on the phone … he was out at his secret range shooting his mighty .338-408 Big Baer at 2000 yards. When I called the maple-stocked 6.5x55AI gun a “Glam Tactical” rig, Joel laughed and agreed “Yep, that would be a good description.”

Permalink Gunsmithing 4 Comments »
April 18th, 2009

Learn Gunsmithing Skills at NRA-Approved Training Centers

NRA-approved gunsmithing courses are conducted at four locations across the country. There is still time to sign up for most of the 2008 courses, which run in May through August. Classes offered at Lassen Community College in Susanville, CA include Law Enforcement Armorers’ School Classes for AR15s and Precision Rifles, an M1/M1A Accurizing Seminar, plus courses in Single-Action Revolver Tuning, Knifemaking, Engraving, and Metallic Cartridge Reloading. Trinidad State College in Colorado classes include Metal Finishing/Blueing, Blue-Printing Bolt Actions, Stockmaking, Accurizing AR15s, tuning 10/22 ‘Raceguns’, plus smithing for Airguns. Montgomery Community College in Troy, NC offers classes in Bolt Action Accurizing, AR15 Accurizing, Engraving, Stock Checkering, and Welding for Gunsmiths. Among the many classes at Murray State College in Tishomingo, OK, are Basic Lathe Operation, M1/M1A Accurizing, Rifle Re-barreling, Shotgun Repair, and Air Rifle Accurizing. For more info, log on to the NRA Gunsmithing School site. College information offices and current summer schedules can be found at MidwayUSA’s Gunsmithing School page. We know two people who completed Armorers’ classes at Lassen CC. They reported the program was excellent. Photo courtesy MidwayUSA.com.

Lassen C.C. | Trinidad St. | Murray St. | Montgomery C.C.

Permalink Gunsmithing, News 1 Comment »
April 18th, 2009

MTM Offers New Dual-Function "Spot & Shoot"

MTM Case-Gard, makers of ammo boxes, range boxes, gun cases, and plastic shooting rests, has come up with a handy new product for hunters and tactical shooters. MTM’s new Spot & Shoot Tripod Adapter combines a front rifle rest with a secure attachment for a spotting scope. Made of polypropylene, MTM’s Spot & Shoot adaptor adds the convenience of a “quick release” scope or camera mount plus a non-marring shooting pad to a typical tripod. Just spot your target, and use the pad to steady your rifle. The Spot & Shoot tripod adaptor costs just $14.92 at Midsouth Shooters Supply.

MTM Tripod Adapter

MTM Tripod AdapterAdaptor Fits a Variety of Optics
The Spot & Shoot can be used with still cameras, video cameras, and laser-rangefinders as well as spotting scopes — so long as the mounted gear’s base has a standard threaded mounting socket. The Spot & Shoot will adapt to most tripod heads, but unless you have a beefy, pro-grade tripod head, we would not advise using the Spot & Shoot with very large, heavy spotting scopes or video cameras with long telephoto lenses that hang way out in the front. This MTM product works best with compact optics.

Permalink New Product Post comment »
April 17th, 2009

Deer 1, Hunter 0 — Or Why You Should Practice Before the Hunt.

Should you sight-in your rifle and practice shooting before you head off into the woods on your deer-hunting trip? Yes, indeed. In the video below we don’t know whether the unlucky hunter’s scope wasn’t adjusted correctly, or maybe he was just a miserable marksman. Many of you may have seen this video before, but it’s still pretty amazing. NOTE: If you are at work, you may want to turn down your volume before launching the video.

YouTube Preview Image
Permalink - Videos Post comment »