Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









September 17th, 2008

'Miracle Device' Cuts Groups in Half — Guaranteed

Well, yes, that headline is a come-on. But there’s truth in the promise. The “miracle device” to which we refer is a simple wind indicator.

Remarkably, many shooters who spend $3000.00 or more on a precision rifle don’t bother to set up windflags when they shoot. Whether you’re a competitive shooter, a varminter, or someone who just likes the satisfaction of drilling small groups, a set of windflags is something you should take to the range every time. And yes, if you pay attention to your windflags, you can easily cut your group sizes in half. Here’s proof…

Miss a 5 mph Shift and Double Your Group Size
In the following table we show the effect of a 5 mph crosswind at 100, 200, and 300 yards. You may say to yourself, “well, I’d never miss a 5 mph let-off.” Consider this — if a gentle 2.5 mph breeze switches from 3 o’clock to 9 o’clock, you’ve just missed a 5 mph net change. What will that do to your group? Look at the table below to find out.

shooting wind flags
Values from Point Blank Ballistics software for 500′ elevation and 70° temperature.

Imagine you have a 6mm rifle that shoots half-MOA consistently in no-wind conditions. What happens if you miss a 5 mph shift (the equivalent of a full reversal of a 2.5 mph crosswind)? Well, if you’re shooting a 68gr flatbase bullet, your shot is going to move about 0.49″, nearly doubling your group size. With a 105gr VLD, the bullet moves 0.28″ … not as much to be sure, but still enough to ruin a nice small group. What about an AR15, shooting 55-grainers at 3300 fps? Well, if you miss that same 5 mph shift, your low-BC bullet moves 0.68″. That pushes a half-inch group well past an inch. If you had a half-MOA capable AR, now it’s shooting worse than 1 MOA.

YouTube Preview Image

If you’ve already invested in an accurate rifle with a good barrel, you are “throwing away” accuracy if you shoot without wind flags. You can spend a ton of money on fancy shooting accessories (such as expensive front rests and spotting scopes) but, dollar for dollar, nothing will potentially improve your shooting as much as a good set of windflags, used religiously.

Which Windflag to buy? Click here to view many windflag designs.

Video from Carbon River Windflags

Aussie Windflag photo courtesy BenchRestTraining.com (Stuart and Annie Elliot).

Permalink - Videos, Tech Tip Post comment »
September 16th, 2008

High-Schooler Shoots 0.711"… Potential IBS 600-Yard Records

High-School senior Paul Wagner set two potential IBS 600-yard Light Gun records this past weekend at the Piedmont Gun Club in Rutherfordton, NC. Paul started off with a .711″ 5-shot group for his first target in LG class. He ended up with a spectacular 1.6288″ 4-target Aggregate. In order, his four targets were: 0.711″, 1.848″, 2.191″, and 1.765″. We are told that both the 0.711″ group and the Agg are potential IBS records for the new 600-yard target. In the process of setting the records, Paul won LG class (group), beating some pretty good trigger pullers, including 2008 Nationals Winner Samuel Hall. Paul also out-shot his own dad, Rodney Wagner (aka “Eggman” on our Shooters Forum). Rodney reports: “My son Paul is pretty humble about his trigger-pulling abilities. As a Dad, I’m probably more excited than he is!”

Paul Wagner IBS 600 yards

Paul Wagner IBS 600 yards

Rodney Wagner tells us: “Paul started going to IBS 600-yard matches last year and actually shot his first match the end of 2006 season using a custom Savage model 12 with a SharpShooter Supply 20BR barrel. This year, when I built Paul a rifle he could call his own, he really started winning. Some even thought he had a chance of winning the IBS 600 Nationals at Oak Ridge this year. Several old timers have commented on his good ‘table manners’. I think his secret is he just doesn’t get excited, and takes everything in stride. He has been known to nap between relays with his IPod and earplugs in a folding chair. Paul shoots free recoil using a Protektor bag with medium high ears and a Bald Eagle front rest on a plate.”

Paul Wagner IBS 600 yards

Record-Setting Rifle Specs
The rifle features a Stiller drop-port Diamondback action, Jewell trigger, and a 28″, 8-twist Krieger barrel (heavy varmint contour). It was chambered as a “no-turn” 6 BRX by Mike Davis using his 6 BRX reamer. The stock is a Shehane Obeche Tracker II bedded and finished by Mike Isenhour who added his own weight system. On top is a Nightforce 12-42x BR scope mounted with Burris Signature ZEE rings. The load is just basic 6 BRX: 33.6 grains Varget, 105gr Berger VLD, CCI 450 primers, Lapua brass on the 7th firing. Rodney Wagner reports: “I sometimes sort bullets by bearing length but have not done that in a while as I have been getting really good bullets right out of the box from Berger.”

Permalink Competition, Reloading Post comment »
September 16th, 2008

ATK Continues Growth with Focus on Consumer Market

The National Shooting Sports Foundation (NSSF) reports that, less than a decade after entering the ammunition market, Minneapolis-based Alliant Techsystems (NYSE:ATK) has become the nation’s largest ammo manufacturer. The company said it is on track to deliver 1.4 billion rounds of ammunition in fiscal year 2009. Yep, that’s BILLION with a ‘B’. ATK-made ammunition now generates more revenue than all other commercial ammo brands, including Winchester and Remington. While military sales make up almost 70 percent of revenues for ATK’s $1.6 billion Armament Systems Division, ATK is aggressively working to increase its sales to target shooters and hunters, according to Business Week:

“[ATK] pushed its way into small-caliber ammunition in 2000 with an aggressive bid to run the U.S. Army’s Lake City Ammunition Plant in Independence, Mo., that made it the military’s biggest ammo supplier. It has since moved swiftly into the civilian sphere, wooing hunters and police officers with creative marketing and bold promises of better performance. Military sales make up almost 70% of revenues for ATK’s $1.6 billion Armament Systems Div., one of ATK’s fastest-growing units. On Aug. 7 the unit reported a 32% increase in sales for the last quarter, to $442 million, while profits jumped 53%, to $44 million.”

ATK’s strategies are paying off, not only in the military sector, but in the civilian sport and hunting markets as well. As a result, ATK’s stock value has more than doubled in the last 5 years, showing robust growth when many companies’ stock prices are being hammered.

Alliant Tech Systems stock price

ATK Expands Lake City Production Facililty
ATK announced it has received an additional $104.3 million in military small-caliber ammunition orders from the U.S. Army. Work on the contracts will be performed by ATK at the Lake City Army Ammunition Plant (LCAAP) in Independence, Missouri. Working in partnership with the Army, ATK has expanded manufacturing capacity at the plant.

Permalink Bullets, Brass, Ammo, News Post comment »
September 15th, 2008

NBRSA 1000-Yard Nationals in Byers, Colorado, Sept. 18-21

The Colorado Rifle Club will be hosting the 2008 NBRSA 1000-yard Nationals at Byers, Colorado from Septermber 18-21. Many of the nation’s top long-range shooters will be competing. Thursday the 18th will be a practice day. Matches will be shot Friday, Saturday, and Sunday (9/19 through 9/21) with two light gun targets and two heavy gun targets each day. For match info and late registrations, call Jim Brummerstedt at (303) 772-5145.

Byers is located on the Colorado plains, east of Denver. The Byers facility, situated on 2080 acres, was founded in 1925. It is considered the best shooting range in the state. At the 1000 yard line (actually 1005 yards) there are 21 bench rest tables with additional benches at 300 yards and at 600 yards for load development. You can learn more about the range by visiting the Colorado Rifle Club website. Traditionally, Byers has been a challenging location, with unpredictable weather and sometimes very strong winds. Luckily, the Colorado Rifle Club has a dedicated weather page on the internet, with current conditions “web-cast” in real time.

CLICK HERE for current weather conditions in BYERS, COLORADO

NBRSA Nationals Byers, CO

Permalink News Post comment »
September 14th, 2008

Stocks by Umberger — A Tradition Continues

We recently followed an auction for a Cooper 17 HMR. Such a rifle (in normal trim) might typically sell for $1300.00 on Gunbroker.com. But the bids on this particular rifle soared, eventually closing at $3126.00! What made this Cooper so desireable? Well it did have a case-colored receiver, but the main attraction was custom-crafted stock from Stocks by Umberger. Shown below is a centerfire stock produced by Brent Umberger.

Brent Umberger custom stocks

Brent Umberger custom stocksArtisan’s Legacy Lives On
Brent Umberger practiced his trade as a master stockmaker for four decades. Sadly, he passed away a couple of years ago. However, the company he started, and the legacy of fine craftsmanship he created, are being carried on. In recent years, Brent worked with Adam Fraley and Jason Basham, training them in the fine arts of gunsmithing and stockmaking and sharing his expertise. After Brent’s passing, Adam and Jason purchased the business from Brent’s widow. Adam and Jason are now continuing the tradition of fine-crafted, hand-checkered wood stocks built from the finest woods available. Stocks by Umberger products are showcased on the website, StocksByUmberger.com.

Brent Umberger custom stocks

Umberger rifles and shotguns have been featured in many publications including American Shotgunner, Gun Week, Peterson’s Shotguns, Sporting Clays, American Walnut Industry and Trap and Field magazines. Umberger guns have graced the cover of The Shooters’ Bible, and a fabulous Purdy sidelock shotgun stocked by Brent is on display at the ATA Hall of Fame.

Brent Umberger custom stocks

Permalink Gunsmithing 2 Comments »
September 14th, 2008

AirGlide Gun Cases on Sale at Sportman's Guide

Readers often ask us: “What is a good, affordable hard-shell gun case for benchrest and varmint rifles with long barrels and wide stocks?” While there are many excellent options, many premium hard cases (such as the SKB) cost $150.00 or more. For about $30.00, the unique Plano AirGlide™ is a great choice. Right now the AirGlide, item WX2-110200, is on sale at Sportsmans’ Guide for just $29.97 (or $26.97 for SG’s Buyers’ Club members). Lockable and airline-approved, the Plano AirGlide offers excellent performance for the price.

Plano Air-Glide Rifle Case

Among injection-molded rifle cases, Plano’s AirGlide™ case is unique in holding a rifle vertically, in foam cradles. This allows ample room for the 3″-wide fore-ends on BR and Varmint rifles. The foam blocks front and rear can even be trimmed for a custom fit, and velcro webbing straps hold the rifle securely. The AirGlide’s hinged top-opening lid provides ample clearance for large target scopes, with no side load on the turrets. (We’ve found that some eggcrate foam-lined gun cases can put enough pressure on scope knobs to alter your zero.) Measuring 51 1/2″L x 7 3/4″W x 12 1/4″H, the AirGlide can easily handle rifles up to 50″ in length. That should hold BR rifles with barrels up to 29″.

Plano Air-Glide Rifle Case

Plano Air-Glide Rifle Case

Permalink Hot Deals 2 Comments »
September 13th, 2008

Affordable Custom FL Dies from Hornady

How would you like a full-length sizing die perfectly fitted to your fired brass? At one time that required you to purchase a die blank, a special undersized reamer (a chamber reamer is too big), and send the work out to a skilled gunsmith. You could expect to have $250-$350 tied up in your custom die when all was said and done.

Now Hornady’s custom shop offers a much less expensive alternative. For $100-$120, plus shipping, Hornady will produce a custom-made die based on your reamer print, spec sheet or fired brass. (FL dies for cases up to 2.55″ COAL are $101.00; larger dies are $120.00) That’s the price for one (1) full-length sizing die. You can either order a conventional non-bushing FL die, or a FL die that uses bushings to size the case-necks. (Standard non-micrometer seaters are also available for another $20.00-$25.00.) To order, we recommend you send 3 or 4 fired cases along with a reamer print to Lonnie Hummel at Hornady Mfg., Box 1848, Grand Island, NE, 68802. Give Lonnie a call first at (800) 338-3220, ext. 208, to discuss design details and get an estimated delivery date.

Hornady Custom Dies

Lonnie and his team of skilled machinists have produced custom dies for many top shooters. Scott Parker had Hornady produce a custom full-length die for Scott’s 6BRX. Scott reports: “The die is great. I’m very impressed. The die is a perfect fit for my brass and the sized brass has very low run-out.”

Permalink News 4 Comments »
September 13th, 2008

NBRSA 100/200 Nationals Set for October 6-11 in Phoenix

The NBRSA 100-yard and 200-yard Nationals will be held Oct. 6-11 at the Ben Avery Shooting Facility in Phoenix, Arizona. Match organizer Gary Ocock states that there are plenty of entry spots left for the match and registrations are still welcome. Four classes will be contested at the NBRSA Nationals: Light Varmint (LV), Heavy Varmint (HV), Sporter, and Unlimited (Rail guns). 4-Gun Fee is $220, 3-gun Fee is $160. Pre-Registration is required. NBRSA requires a $40 late registration fee after September 6, 2008. Match Directors anticipate three (3) relays. Shooters requesting the same bench rotation, sharing equipment must request this in writing. Camping at the range is $10/day. Click the links below to view/download registration forms in MS Word and Acrobat (.pdf) format.

| NBRSA Nat’ls Registration Form (Word Doc)
| NBRSA Nat’ls Registration Form (.pdf)

Write checks payable to AZ Benchrest. Mail checks and registration forms to Arizona Benchrest Shooters, 15231 West Gelding Drive, Surprise, AZ 85379. If you plan to attend but won’t be able to mail in your registration in time, email Gary Ocock at onehole149 [at] aol.com. For NBRSA membership information and application form, visit NBRSA.org.

Permalink Competition, News Post comment »
September 12th, 2008

Sweden Hosts World Military Shooting Championships

The 43rd Annual World Military Shooting Championships will be held in Boden, Sweden from September 14-21. Over 550 shooters from 45 countries are slated to attend. From the U.S.A., 14 armed services shooters will compete in Sweden, including three-time Olympian Sgt. 1st Class Jason Parker, and four-time Olympian Army Reserve Staff Sgt. Elizabeth Callahan.

The Military Shooting Championship are conducted under the auspices of the Conseil International du Sport Militaire (CISM). Male and female shooters will compete in separate divisions, shooting both pistols and rifles. Events will include: 25-meter .22-caliber pistol, 25-meter .32-caliber centerfire pistol, 50-meter Sport Rifle (both prone and 3-position), and 300-meter Standard Rifle (both prone and 3-Position). In addition, there will also be 300-Meter Rapid Fire Military Rifle Matches. The 300m competition is still dominated by the 6mmBR Norma cartridge, though some teams will be shooting 6XC ammo from Norma.

The competitions are to be held at Rödberget Shooting Centre, about four kilometres southwest of Boden town centre. Two new shooting ranges have been built and two ranges have been overhauled. The new facilities were set up in 2007, when Boden hosted the Nordic Military Shooting Championships.

One of the three women on the Swedish 50-meter team is Christina Bengtsson, an officer at the Armed Forces Technical School in Halmstad. Christina, who won gold in the World Military Shooting Championships in Switzerland in 2005, observed that Boden offers first-rate facilities. Christina comments: “[Boden has] excellent shooting ranges. I can safely say this is one of the very best facilities in Sweden, and I hope it will be put to good use in civilian competitions.” For more information about the CISM World Military Championship, visit the Swedish Armed Forces web site: www.mil.se/wmsc08. Starting Sept. 15, that site will offer weblinks with updated event news and match results.

Permalink Competition Post comment »
September 12th, 2008

Bill Hawk's Custom Bolt Knobs — Hand-Crafted

Looking for a cool extended bolt knob to provide extra leverage and more secure grip while working the action of your rifle? Bolt Knobs by Bill offers a wide array of styles and colors, all hand-crafted with great precision. Bill Hawk’s products range in price from $20 to $30. The O-Ring style provides excellent comfort and grip. The Tactical style knob is slightly longer and has no o-rings. It is available with or without knurling. Bill also offers a conventional oversized ball in plastic or metal. Click images below to see LARGE PHOTOS.

Custom bolt knobs are made from aluminum stock that has been machined, media blasted, and powder coated for a durable and uniform finish. Choose from dozens of powder-coat colors. Knobs are drilled and tapped to fit 5/16 x 24 threaded bolt handles. A round ball style is available in aluminum, steel, or phenolic (hard plastic with threaded brass insert). This configuration still provides plenty of gripping surface but keeps the overall length of the bolt handle shorter compared to the tactical model.

Bill Hawks tells us that all his products can be customized: “I started selling bolt knobs a few years ago when I began to combine my passion for metal working and my passion for shooting. Of course, there were other manufacturers who already made bolt knobs, but I wanted to offer something a little different by allowing the shooter to tell me what they wanted and do my best to produce it. Hence the ‘custom’ part. Most people are happy with the tactical and o-ring knobs that are featured on my website, but I also make them to customer spec. Length, profile, thread size, and material can all be adjusted at no extra charge in most cases. My emphasis is primarily on offering a service to my fellow shooters.” There is a secure shoping cart on Bill’s Website, so it’s easy to order. Direct questions to info [at] boltknobsbybill [dot] com, or call (319) 321-0827.

Permalink Gunsmithing 4 Comments »