|
|
July 10th, 2008
Here’s a nice do-it-yourself project for the summer. Simpson, maker of Strong-Tie fasteners, offers FREE Workbench Plans for a sturdy, 48″-wide bench with a pegboard backing and both upper and lower shelves. A complete list of fasteners and cut lengths is provided. For use as a loading bench with mounted presses, you can double-up the bench-top for extra ridigity. Without much difficulty, the plans can be adapted to build a wider bench if you prefer.

The same downloadable document also contains plans for an 80″-high 6-shelf unit, a 72″-high heavy-duty shelving unit (with 4 shelves), and a 48″-wide heavy-duty table.
July 9th, 2008
As we reported some days ago in the Daily Bulletin, Berger Bullets is rolling out a line-up of tangent-ogive, non-VLD “thick jacket” bullets. These are designed to work more reliably on extended shot strings with hot barrels. In addition, the bullet shape should be less sensitive to seating depth than secant-ogive VLD designs. Berger’s Eric Stecker reports: “So far we have made ONLY the 6.5mm and 7mm in the THICK jacket configuration. Remember that the THICK jacket is meant to eliminate or significantly reduce bullet failures. The standard bullets still perform very well. We will soon be making THICK jacket bullet is 22 cal, 6mm and 30 cal. When these bullets are available we will be posting the news on this forum.”

Larry Bartholome, past captain of the U.S. F-Class Team, has tested the 6.5mm thick-jacket 140s. Larry is impressed: “I have been shooting two different lots of 6.5mm 140gr thick-jacket Bergers and they are, if anything, more accurate than the thin-jacketed ones were/are. I have shot Lot 235 and Lot 1231. I used Lot 1231 in the Lodi Midwest Palma Championships shooting F-Class. It would be hard to ask for a better bullet. I don’t think I had a bullet out for elevation (10” Ten-ring) out of 340 record shots I fired all week.” [Note: These are VLD-style bullets Bartholome is using, not the tangent-ogive 140s.]
July 9th, 2008
Even in today’s digital age, many reloaders prefer the simplicity and reliabilty of a balance scale for weighing powder charges. In this Bulletin, we reported that our own PACT digital scale suffers from fluctuating read-outs. The weight reading drifted up to 0.3 grains in less than an hour. (PACT Story). LTRDavid has come up with a clever upgrade to an O’Haus-type scale that makes the weighing process easier for those of us with old eyeballs. He simply mounts a magnifying glass in front of the balance marker, using two clamps.
Pretty ingenious wouldn’t you say? We wonder why the scale-makers didn’t offer a small magnifier as a factory option long ago. For more smart reloading tips, check out David’s website, LTRDavid.net.

When working with balance beam scales, be sure you have the device leveled. Even a small amount of tilt will throw off the measurement. We’ve seen folks who keep their scale on a shelf or storage area, and then take it out for use. That’s fine, but remember than your loading bench may not be uniformly level on all sections. Unless you put the scale in exactly the same place on the bench every time (at the same angle), you may have to re-set the level. Likewise, if you take the scale to a range, be sure to re-level it to your new working surface. And remember that is it just as important to level the scale front to back as left to right. Most scales have a leveling adjustment, but that will only level the scale left to right. If your bench has a bad front to back slant, you may have to build a corrective base for your scale.
July 8th, 2008
At our request, 2008 IBS 600-yard National Champion Samuel Hall has prepared a 9-minute VIDEO showing his techniques for shooting from the bench. Sam covers a number of topics including bag set-up, body position, bolt manipulation, and loading skills. He also explains the importance of having a relaxed, comfortable posture and keeping your head in the same position shot to shot.
CLICK HERE to watch SAM HALL VIDEO

If you’re serious about accurate benchrest shooting, at ANY distance, you should watch this video. Sam’s tips can really help you. We guarantee it. While the video itself is grainy and wind noise affects the audio, you can still glean many great points from the video. From minute 8:00 on Sam shoots a 5-shot string on camera with his BAT-actioned, Leonard-stocked 6BR. Though he was fighting blustery, 20-mph winds Sam achieves a half-inch group at 200 yards. Quarter-MOA in such conditions is good shooting.
July 8th, 2008
The RCBS ChargeMaster 1500 has been our top-rated electronic powder dispenser. It is very popular with precision centerfire rifle reloaders who benefit from weighing every charge. It’s a very versatile tool that can make your reloading much more efficient.
MidwayUSA has slashed the price on the RCBS ChargeMaster 1500 Powder Scale and Dispenser Combo, item 772151. The selling price is now just $272.46, marked down from $309.99. That’s a $38 savings.
Is the Unit Worth Buying?
Most RCBS ChargeMaster 1500 owners have been very happy with the devices. If you click the “Reviews” Tab on MidwayUSA’s ChargeMaster Page, you can read 87 reviews. The vast majority of the reviews are five stars. However, as with all electronic products, a small number of ChargeMasters have required repair or replacement. We do think RCBS now has most of the bugs worked out, and they are generally quite reliable (provided incoming voltage is uniform and the device is leveled properly.)
The units we tested showed excellent dispensing accuracy, delivering the desired charge within + or – 0.1 grain, 48 out of 50 times with H4350. (Weights were confirmed with a high-end digital laboratory scale.) The ChargeMaster works especially well for long, extruded powders, which are favored by long-range shooters. You can also speed the dispensing process by starting out with a scoop of powder on the pan (below your desired weight), and letting the ChargeMaster “top off” the charge.
ChargeMaster VIDEO
CLICK HERE to watch an excellent short video demonstrating the RCBS ChargeMaster 1500 in action. It shows how to calibrate the machine, how to weigh powder, and how to remove powder when you’re done.

July 7th, 2008
Yes, it’s July again, and that means it is time for the National Shooting Championships at Camp Perry. The events kick off tomorrow with the start of the 5-day Pistol competition.
The NRA National Outdoor Rifle & Pistol Championships are fired at Camp Perry, OH, during July and August. Firing dates for 2008: Pistol – July 8-12; Smallbore 3-Position – July 16-19; Smallbore Prone – July 20-24; High Power Rifle – Aug 4-8; High Power Long Range – Aug 9-13.

If you wish to compete at Camp Perry in an event held later this summer, you can apply via the Camp Perry Online Entry Page. Complete competition results are updated regularly on the NRA website.
CLICK HERE for Camp Perry Match Results.

There are some key changes at Camp Perry this year:
1. Big money is at stake. Over $200,000 in cash/gift card prizes will be awarded. The cash prizes or Visa award cards replace award points in the Grand Aggregate Championships.
2. A Team Match has been added to the Long-Range High Power segment of competition (August 4-8). Four-person teams will compete using a Palma Course of Fire. This was a popular addition — the Team Match roster is already full.
3. A new target will be used for 3-position shooters in the National Smallbore Rifle Championships.
July 7th, 2008
The 2008 USA Shooting National Championships for Rifle/Pistol came to a close today with Matt Emmons earning his third national title of the competition, taking first place in the Men’s 3-Position Rifle event. Matt won an Olympic Gold Medal in 2004 and will be on the 2008 U.S. Olympic Team going to China. Matt is married to Czech Shooter Katerina Kurkova, 2004 Olympic Bronze Medalist and 2002 World Champion.

Emmons (Browns Mills, N.J.), finished on top with final of 101.1 and a total score of 2455.1. Earlier in the competition, Emmons also claimed the Men’s Air Rifle and Men’s 3 Position Rifle titles. U.S. Army Marksmanship Unit (USAMU) member and 1996 Olympian Eric Uptagrafft (Spokane, Wash) took second place with a total score of 2437.1 and USAMU member Michael McPhail (Darlington, Wis.) finished in third place with 2435.8. The 2008 USA Shooting National Championships for Rifle and Pistol were held at Ft. Benning’s International Shooting Complex, home of the USAMU.
Photo courtesy USAShooting.org
July 6th, 2008
Alliant Powder, a division of Alliant Tech Systems Inc., (ATK), has confirmed that the new Reloder 17 powder will ship out later this month. This is definite. The powder is going out to distributors within 2 to 3 weeks. Alliant had originally intended to start shipping Reloder 17 by mid-April, but there were some production-line delays relating to packaging. Reloder 17 is made in Switzerland by NitroChemie and Alliant had to make some modifications to its production line to be compatible with NitroChemie’s bulk powder containers.
We are very excited about the new Swiss-made Reloder 17 for Alliant. It is a high-energy powder with a burn rate close to IMR 4350, and “midway between Reloder 15 and Reloder 19.” The powder density is optimized for the short magnum cases such as the 7mm WSM and 300 WSM, but it also will work very well with cartridges such as .243 Win, .270 Win, 6XC, and 6mm Remington, according to Alliant Product Manager Dick Quesenberry.
Reloder 17 features an advanced, penetrant-type kernel coating. Alliant believes this is superior to typical surface powder coatings because it provides a more consistent, progressive burn. The powder pressures do not spike as sharply as with surface-coated powders, but remain more consistent throughout the burning process.
Mr. Quesenberry noted that Alliant tested many formulations, from a variety of makers, before choosing the Swiss-made Reloder 17. Alliant’s new RL17 is NOT the same as Norma URP, produced by Bofors in Europe. According to Alliant, the new Reloder 17 tested superior to URP (and most other powders in that burn range) in all major criteria: Velocity, Accuracy, ES/SD, material consistency, and resistance to ambient temperature-induced pressure changes.
The new RL17 will be offered in 1-lb. and 5-lb. containers and will cost about the same as other Alliant Reloder powders, such as RL15 and RL19.
July 5th, 2008
If you want to test your long-range shooting skills against some of the best shooters in the country (including our own Jason Baney), head to Pennsylvania next weekend for the Williamsport World Open. Shooters will compete in Light Gun and Heavy Gun classes for a host of prizes including scopes, actions, and barrels. Sponsors include Nightforce Scopes, BAT Machine, and Bartlein, Hart, and Krieger barrel-makers, among many others. In addition, the Original Pennsylvania 1000-Yard Club will give $1000.00 CASH to anyone breaking the match time current Light Class or Heavy Class Ten-Shot Benchrest World Record during this event. (Award limited to person shooting smallest group of the weekend.)

The schedule of events will be: Saturday Morning – Light Gun Match One; Saturday Afternoon – Heavy Gun Match One; Sunday Morning – Heavy Gun Match Two; Sunday Afternoon – Light Gun Match Two. Complete Event info, including Course of Fire, Rules, and a list of nearby motels, is found on the World Open Webpage, or contact Matt Dienes, 724-479-0790.
CLICK HERE for World Open APPLICATION
The deadline for entry to the World Open at 7:00 pm Friday night. Rotations will be drawn at this time so please get your entry fees in before that time. NO LATE ENTRIES will be accepted on Match Day. The cost is $60.00 per Class for the two day event ($120 for both Classes both days). The Pig roast held Saturday evening is included in this fee.




July 4th, 2008
Shooters who convert factory actions to run 6BRs or 6PPCs should consider having the firing pin bushed. These small-cased cartridges like to run at high pressures. When running stout loads, you can get cratering caused by primer flow around the firing pin hole in the bolt face. The reason is a little complicated, but basically the larger the hole, the less hydraulic pressure is required to crater the primer. A limited amount of cratering is normally not a big issue, but you can reduce the problem significantly by having a smith fit a bushing in the firing pin hole. In addition to reduced cratering, bushing the firing pin often produces more consistent ignition.
This is a highly recommended procedure that our editors have had done to their own rifles. Greg Tannel (Gre-Tan Rifles) is an expert at this procedure, and his turnaround time is fast–usually 1-3 days (shop time). Current price for a bushing job, which includes turning the firing pin to .062″, is $60 including return shipping. (Price subject to change.)

If you have a factory rifle, a bushed firing pin is the way to go if you are shooting the high-pressure cartridges such as 6PPC, 6BR, and 6.5×47. This is one of the most cost-effective and beneficial upgrades you can do to your factory rifle.
|