|
|
February 16th, 2008
The March 40X target scope has already made a big splash in benchrest competition. Many of the top shooters have replaced their Leupold Competition scopes with the March. This editor has shot with a March 40X and I can affirm it is brighter than the Leupold Comp 40X, and the March is sharp and bright all the way out to the edges. There are none of the side-focus parallax lash problems sometimes encountered with the Leupold. In competition so far, the March scopes have shown superior tracking and repeatability.
Based on the successful 40X format, March has introduced two new fixed-power target scopes, a 50X and a 60X. (In addition, there is a new 10-60X zoom–but that will be the subject of a later report.) Lou Murdica has been using the 50X in recent matches and he reports “it is outstanding. Even at 50X it is plenty bright. Visually you won’t notice the difference between the 40 and the 50 except you get more power, of course.”
The new 50X and 60X are the same size and weight as the March 40X. All three versions are 14.29 inches long, and weigh 599 grams (21.04 ounces). That’s about 12 ounces lighter than a Nightforce 12×42 BR. Front objectives are 52mm and the main tube is 30mm. All three fixed-power March scopes feature 72 MOA of total elevation and 50mm of windage. Clicks are 1/8th-MOA for 40X, 50X, and 60X.
The primary optical difference (other than magnification), is the size of the exit pupil. (A scope’s exit pupil is the actual diameter of the tiny cone of light that your eye perceives. A large exit pupil is more “user friendly”. With a very small exit pupil, it becomes more difficult to pick up the white circle of light–the position of your head becomes ultra-critical.) In optics there is no “free lunch”. Holding the front objective diameter constant, if you increase magnification, the exit size will get smaller. The March 40X has a 1.3mm exit pupil, the 50x measures 1.04mm, and the 60X has a 0.87mm exit pupil. We think the very small exit pupil on the 60X may undercut the practical utility of the higher magnification.

In the USA, March Scopes are sold exclusively by Kelbly’s. Call Hobie Bond at Kelby’s for current pricing and availability. We expect the 50X and 60X to run about $2200.00.
CLICK HERE for MARCH 50X and 60X SPEC SHEET
February 16th, 2008
Benchmark Barrels of Arlington, Washington has earned a stellar reputation for its rimfire barrels. Many of the most accurate rimfire BR rigs in the country sport Benchmark barrels. Benchmark pioneered the 2-groove barrel, and its reverse-taper blanks, in 2-groove, 3-groove, and 6-groove, are in high demand. Benchmark is known for the quality of its lapping work and its ability to craft a precise progressive taper (or “choke”) along the full length of the barrel. Typically, Benchmark’s rimfire barrels are hand-lapped with .0006-.0007″ of internal bore taper. This is an even, slight reduction of bore diameter–not just a choke at the end.

Centerfire Barrel Production
Benchmark offers a full range of centerfire calibers now, from .22 all the way up to .50 caliber. The three-groove, standard land, 8-twist 6mm barrel has been shooting exceptionally well, and Benchmark recently acquired new buttons so it can deliver 1:7″ and 1:9″ twists too. The 6.5mm barrels and 30 caliber barrels have been shooting very well also according to match reports. Benchmark can deliver both canted-land and conventional land versions of its centerfire barrels. Which shoots best? According to barrel-maker Ron Sinnema, “the 6mm 3-grooves with standard lands are working great. Bruce Baer tried one recently and said is was exceptionally accurate.” And for customers who prefer cut-rifled barrels, Benchmark now offers cut rifling in most bore sizes, from .22LR all the way up to rifled shotgun bores.

Great Value: $250.00 for a Premium Centerfire Barrel
Benchmark barrels are attractively priced. A centerfire blank with 27.5″ finished length costs just $250.00. Sinnema noted: “That’s our highest quality — we only sell one grade”. A variety of contours are available and (at added cost) Benchmark can provide fluting or an octagon barrel profile.
Rimfire barrels cost $325.00. They are more expensive because of the extra hand labor required. Ron explains: “The taper lapping is very time-consuming on the rimfire — but that’s one secret to their accuracy.”
Benchmark has a website “under construction”. For more info, contact Benchmark by phone, fax, or email:
Benchmark Barrels
Ron Sinnema, Barry Graber
1105 Pioneer Hwy East
Arlington, WA 98223
phone: (360) 652-2594
email: benchmarkbarrels [at] yahoo.com
February 15th, 2008
For someone just getting started in reloading, who wants a functional, yet inexpensive set-up, MidSouth Shooters Supply is offering a Lee Breech Lock Challenger Press Reloading Kit for just $89.99. This features a Challenger press with Lee’s New Breech-Lock inserts (3 Breech Lock Bushings supplied with kit). We like the Breech-Lock System–it holds your dies solidly in position, yet you can swap them out with just a quick one-third turn of the die. It’s a smart feature for a single-stage press.

The Breech Lock Challenger Press features an all-steel linkage, and a very handy tube-type primer catcher. Midsouth’s $89.99 Challenger Press Reloading Kit includes the Lee Auto Prime, Auto Prime shell holder set, Pefect Powder Measure, Safety Scale, Powder Funnel, Case Cutter and Lock Stud, Chamfer tool, Sizing lube, Small and Large Primer Pocket Cleaners. This is a heck of a deal for all that equipment. Lee’s suggested retail price for the Breech Lock Challenger Press Kit (item 90030) is $144.98.

There is an excellent review of the Lee Breech Lock Challenger Press Kit on Realguns.com. This review has nice, large photos, and clearly illustrates how the Breech Lock system functions.
CLICK HERE for LEE RELOADING KIT REVIEW
February 15th, 2008
As you probably know by now, an important gun rights case, District of Columbia vs. Heller (docket 07-290), is now before the U.S. Supreme Court. As it directly involves the issue of individual rights under the Second Amendment of the U.S. Constitution, this case may impact ALL firearms owners. Legal experts note that this is the first time in 70 years that the High Court has been asked to interpret the basic meaning of the Second Amendment. The Supreme Court will hear the case on March 18. (Oral Arguments are scheduled for 10 am). Amicus briefs have been submitted by notable parties, including many U.S. States, and Vice President Dick Cheney recently lent his signature (in his role as President of the U.S. Senate) to a brief filed by a Congressional Caucus.
If you want to learn more, American Rifleman Magazine has an excellent article that covers the “Top 10 Facts” about D.C. vs. Heller. Authored by NRA-ILA Executive Director Chris Cox, this is a “must-read” summary of the landmark case.
CLICK HERE to READ ARTICLE on SUPREME COURT CASE

February 14th, 2008
A new, two-stage CG Universal Match Trigger is in production. It will be available from Jackson Rifles in Europe and Tom Myers in the USA. The trigger’s final stage pull-weight adjusts from 10 ounces to over 63 ounces, and both a curved or straight trigger finger is offered. Notably, this new design works with a very wide range of actions, both custom and factory. In addition to a Remington 700 version, for example, there are versions for Barnard, Mauser, RPA, SAKO, Tikka, and Winchester Model 70 actions. That makes this CG Trigger one of the most versatile match triggers ever offered.
German Salazar of ShootersJournal.com has one of the new CG Triggers, and he plans to field test and review the product for us very soon.

The CG Universal Trigger uses a variety of upper frames to fit each specific rifle action. The upper frame contains the final lever(s) of the trigger. A universal main housing is attached to this upper frame. This ensures similar function, settings and “feel”, whatever action the trigger is fitted to. The CG Universal is a true two-stage trigger, so that (unlike modified direct-pull triggers fitted to some “tactical” rifles), the sear engagement reduces and fully recovers with the first-pull movement of the trigger finger. The CG Universal trigger system was designed by Robert Chombart, who also designed the CG MILLENNIUM, CG INCH and other target rifle actions.
The CG Universal Trigger System works with numerous rifle actions including:
ANSCHUTZ
BARNARD
CG INCH
CG MILLENNIUM
MAUSER 98
MUSGRAVE
PARAMOUNT
PARKER-HALE M85, L81A2
REMINGTON 700
RPA 2000
RPA QUADLITE
RPA QUADLOCK |
SAKO 75
SAKO FINNFIRE
SAKO TRG
SPRINGFIELD
SWING
TIKKA 5xx/6xx
TIKKA T3*
US 1917 – P14
WEATHERBY MK V
WINCHESTER M70 |

February 14th, 2008
AccurateShooter.com’s Editor attended the recent SHOT Show. CLICK HERE to read our Show Highlights Report, complete with interviews, late-breaking product news, and Video interviews.
For more info on SHOT Show, you can still access the four (4) official Daily Reports created in .pdf format during SHOT Show. We noticed the official ShotShow.com web links for these reports were pretty hard to find last week, so you may have missed them. Below you’ll find handy links for each daily report. Note: There is some duplication of content from day to day, but each “issue” does contain new content. In particular, the “New Product” sections were updated daily.

SHOT Daily 1 (Feb. 2)
Features: New Rifles for 2008, New Shotguns 2008, New Handguns 2008, Hunting Boots/Clothing, NSSF Industry Research, New Products (Part 1)
SHOT Daily 2 (Feb. 3)
Features: Air Rifles, Custom Knives, Scholastic Clay Program, Field & Stream “Best” Awards, New Products (Part 2)
SHOT Daily 3 (Feb. 4)
Features: Air Rifles, Custom Knives, NSSF Outdoor Challenge, New Products (Part 3)
SHOT Daily 4 (Feb. 5)
Features: NSSF Shooting Sports Summit Report, Legislator of Year, Writer of Year, Small Item Product Reviews, Custom Products, New Products (Part 4)

February 13th, 2008
You knew the firearms industry was big business, but we bet you didn’t know just how big. According to a report by TheStreet.com, the overall firearms, hunting, and ammunition sectors of the economy collectively represent a $76 billion dollar industry. At SHOT Show, TheStreet.com TV interviewed Mark DeYoung, an executive with ATK Ammunition Systems. DeYoung revealed some amazing statistics:
Annual Sales of “Hunting and Sporting” ammunition alone total $750,000,000.
ATK’s sporting, law enforcement, and military annual ammunition sales total $1.5 Billion dollars. ATK is now the largest ammunition producer in the world.
ATK produces 6.5 Billion rounds of ammunition every year. Yep, that’s “B” as in Billion. That includes everything from .22 rimfire up to tank ammo.
ATK uses 25,000,000 to 30,000,000 pounds of copper each year in ammunition production.
DeYoung also explained that commodity costs have skyrocketed. A few years ago copper was $0.77 per pound. Now it is $3.20 per pound. Lead prices have also increased substantially. This explains why precision brass and bullet costs have gone up significantly in recent years.
CLICK HERE to watch ATK VIDEO

While you may not be familiar with the ATK business name, most shooters will recognize the many commercial brands under the ATK umbrella:
Alliant Powder for reloaders
RCBS reloading equipment
CCI, Speer, Lawman, and Blazer ammunition
CCI and Federal Primers
Federal Premium, Fusion, and Estate Cartridge ammunition
Speer bullets
Champion traps and paper, metal and clay targets
Gunslick and Outers gun care products
Shooters Ridge rests, and gear bags
Ram-Line gun stocks
Weaver mounting systems
February 12th, 2008
Alliant Powder, a division of Alliant Tech Systems Inc., (ATK), will be shipping new Reloder 17 powder in mid-March, 2008. This is an all-new, double-base powder produced in Switzerland by NitroChemie for Alliant. It is a high-energy powder with a burn rate close to IMR 4350, and “midway between Reloder 15 and Reloder 19.” The powder density is optimized for the short magnum cases such as the 7mm WSM and 300 WSM, but it also will work very well with cartridges such as .243 Win, .270 Win, 6XC, and 6mm Remington, according to Alliant Product Manager Dick Quesenberry.
Reloder 17, a state-of-the-art propellant, promises to deliver higher velocities than competitive powders for many popular calibers. If you have the “need for speed”, Reloder 17 is worth trying if you’re shooting IMR4350, H4350, N550 or similar powders right now. The new RL17 will be offered in 1-lb. and 5-lb. containers and will cost about the same as other Alliant Reloder powders, such as RL15 and RL19.
Mr. Quesenberry noted that Alliant tested many formulations, from a variety of makers, before choosing the Swiss-made Reloder 17. Alliant’s new RL17 is NOT the same as Norma URP, produced by Bofors in Europe. According to Alliant, the new Reloder 17 tested superior to URP (and most other powders in that burn range) in all major criteria: Velocity, Accuracy, ES/SD, material consistency, and resistance to ambient temperature-induced pressure changes.
Reloder 17 features an advanced, penetrant-type kernel coating. Alliant believes this is superior to typical surface powder coatings because it provides a more consistent, progressive burn. The powder pressures do not spike as sharply as with surface-coated powders, but remain more consistent throughout the burning process.
Testing has shown that Reloder 17 offers big velocity gains in many cartridges compared to other powders in the same burn range. For example, in the 6mm Remington, using an 85gr BTSP, Reloder 17 delivered a +156 fps gain over all other powders listed in the current Speer Reloading manual. Likewise, in the 300 WSM with a 180gr BTSP, Reloder 17 offered +104 fps edge in velocity over all powders listed in the Speer Manual. Below is a chart showing projected velocity gains compared to other Speer Manual-listed powders.
VELOCITY GAINS with RELOADER 17 POWDER

Alliant has already done extensive load testing in its ballistics laboratories and has load data available for 20 popular cartridges, including .243 Win, 6mm Rem, 6.5×55, .260 Rem, .270 Win, .308 Win, 30-06, 7mm WSM, 300 WSM, and 300 Win Magnum.
CLICK HERE for ALLIANT RELODER® 17 LOAD DATA
NOTE CONCERNING LOAD DATA:
Reloder® 17 was created with new technology to provide velocity greater than the competition in the most popular standard rifle calibers and the new short magnums. For the recipes developed in Alliant’s Ballistics Laboratory, all loads used Speer bullets and list the correct Overall Length — DO NOT SEAT THE BULLETS TO A LESS OVERALL LENGTH. These recipes are maximum loads and shall not be exceeded. Always start at least 5% low and work up.
February 11th, 2008
At SHOT Show, Jerry Stiller of Stiller Precision Firearms noted that his business grew rapidly in 2007, driven by the success of his Predator and Tac actions. These offer a Rem 700 style design, with improved tolerances and component quality. Jerry has doubled the square footage of his shop and added new machines and personnel to meet increased demand.
CLICK HERE to VIEW STILLER INTERVIEW

Jerry announced his plans to develop new actions in the months ahead. The first will be a specialized, single-shot, varmint action similar to the Predator, but “a little tighter” according to Jerry. It will be a Right-Bolt, Left-Port with a cone breach. Price should be comparable with the Predator action. “Hoped-for” release date will be mid-summer 2008. Later in 2008, Stiller Precision will introduce an all-new rimfire action similar to a Remington 40X. This will be followed by a Black Powder action.
Viper and Cobra Special–$50.00 off
If you call (972) 429-5000, and mention 6mmBR.com, Jerry has promised to offer $50.00 off existing Right-Bolt, Left-Port, Drop-Port, PPC-boltface Viper or Cobra actions. This discount is limited to the first TEN (10) Viper or Cobra orders. The discount is for this EXACT configuration only: PPC, Drop-Port, RBLP Viper or Cobra. The discounted price will be $900.00 including rings and trigger guard.

February 11th, 2008
Air rifles are ideal trainers for young shooters. They can be used indoors (with appropriate pellet traps). And, because they are not firearms as defined by state and federal law, there is no problem (in most jurisdictions) with the use of air rifles by teen shooters. Junior Air Rifles can be purchased through the Civilian Marksmanship Program (CMP).

High School Air Rifle Competition on TV
This week, the ShootingUSA television show features Air Rifle Competition at the high school level. ShootingUSA reports the shooting sports are expanding in high schools across the country: “Air rifle competition is a growing sport in high schools. The proof is the largest invitational high school team match in the country.” The tournament hosted by Mongomery Bell Academy in Nashville, TN draws over 400 competitors from 72 high schools in 16 heartland states.

The format is Olympic-style 10-meter competition. The match requires 20 shots from each of three positions — standing, kneeling and prone. 600 is a perfect score, but with the very tiny Ten-Ring, perfect scores are very unusual. There are three classes of competition. Sporter Pneumatic Class (pump rifle, no special gear); Open Sporter Class (compressed air rifle, glove allowed); and Precision Class (Shooting Suits, Shoes and Gloves allowed).
ShootingUSA runs every Wednesday on the Outdoor Channel at the following times:
Eastern Time 4:30 PM, 8:30 PM, 2:00 AM (Thursday)
Central Time 3:30 PM, 7:30 PM, 1:00 AM (Thursday)
Mountain Time 2:30 PM, 6:30 PM, Midnight
Pacific Time 1:30 PM, 5:30 PM, 11:00 PM
Camp Perry Junior Open
In related news, the Second Annual CMP Camp Perry Junior Open was held successfully on Jan. 18-19. For the second year in a row CMP’s newest three-position air rifle event, the Camp Perry Junior Open, was filled to capacity with 57 junior shooters. Travelers from as far away as Auburn, Alabama and Waukegan, Illinois made the trek to Camp Perry, Ohio, for the sanctioned precision and sporter air rifle match.

The event was held on a temporary range in Camp Perry’s Bataan Armory, which the CMP acquired from the Ohio National Guard. Next year the Camp Perry Junior Open will take place at the new CMP Camp Perry Competition Center which will house an 80-point air gun range with electronic targets. The Competition Center will open in June, 2008.
|