Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









January 3rd, 2008

Marlin Sells for $41.7 Million

Following up on our recent story on the Sale of Marlin Firearms to Remington Arms, here are more details of the deal. Remington Arms will purchase all of Marlin’s stock for $41,700,000 according to documents filed with the U.S. Securities and Exchange Commission. The deal is expected to conclude by the end of January. Both Remington and Marlin will now be under the umbrella of Cerberus Capital Managment, which acquired Remington Arms in April of 2007. This deal combines two of the most storied American arms-makers. Remington was founded nearly two centuries ago, in 1816. John M. Marlin, who worked for Colt during the Civil war, started his own business in 1870, initially making derringers and revolvers.

Permalink News Post comment »
January 2nd, 2008

Barrel Throat Erosion — Reality Revealed

So what does a “worn-out” barrel really look like? Tom Myers answered that question when he removed a 6.5-284 barrel and cut it down the middle to reveal throat wear. As you can see, there is a gap of about 5mm before the lands begin and you can see how the lands have thinned at the ends. (Note: even in a new barrel, there would be a section of freebore, so not all the 5mm gap represents wear.) There is actually just about 2mm of lands worn away. Tom notes: “Since I started out, I’ve chased the lands, moving out the seating depth .086″ (2.18 mm). I always seat to touch. My final touch dimension was 2.440″ with a Stoney Point .26 cal collet.”

Except for the 2mm of wear, the rifling otherwise looks decent, suggesting that setting back and rechambering this barrel could extend its useful life. Tom reports: “This was something I just thought I’d share if anyone was interested. I recently had to re-barrel my favorite prone rifle after its scores at 1,000 started to slip. I only ever shot Sierra 142gr MatchKings with VV N165 out of this barrel. It is a Hart and of course is button-rifled. I documented every round through the gun and got 2,300 over 4 years. Since I have the facilities, I used wire EDM (Electro Discharge Machining) to section the shot-out barrel in half. It was in amazingly good shape upon close inspection.”

Tom could have had this barrel set back, but he observed, “Lately I have had to increase powder charge to maintain 2,950 fps muzzle velocity. So to set it back would have only increased that problem. [And] I had a brand new 30″ Krieger all ready to screw on. I figured it was unlikely I’d get another full season on the old barrel, so I took it off.”

Permalink Gunsmithing, Tech Tip Post comment »
January 2nd, 2008

'Dream Job' Available with Remington

Are you a long-gun expert, a wiz at Excel spreadsheets, who likes to travel? Here’s an employment opening that could be a “dream job” for a knowledgeable shooter with an MBA or marketing background. Remington Arms is now hiring for the position of Brand Manager of Premium and Custom Firearms. The Brand Manager is tasked with growing sales of Remington’s line of Custom/Premium firearms and associated brands (e.g. Parker Gun). The Brand Manager works closely with Remington’s Sales Division, as well as Manufacturing (Custom Shop), Planning, Research & Development, Customer Service, and Marketing Communications.

Remington lists the general job qualifications as follows: Bachelor’s degree and 3-5 years product marketing/brand management experience and/or training; or equivalent combination of education and experience. MBA preferred. Familiarity with premium shooting sports products also preferred. Must be able to understand financial reporting and prepare and explain financial analysis. Must have extensive knowledge of firearms market and have solid understanding of technical concepts as they relate to product design. Must be able to attend and provide presentations at trade shows. Available to travel 40-50% domestic travel and international travel as needed. Proficiency in word processing, spreadsheets and presentation software and SAP experience preferred.

Interested candidates should send their resume to jobs@remington.com.

Who knows — this could be your chance to significantly influence the future of the firearms industry. Want to see Remington release a line of premium target or varmint rifles? Well, as Brand Manager, you might well be able to steer Remington in that direction.

Permalink News Post comment »
January 1st, 2008

Happy New Year and Message to Our Readers

First, we’d like to wish all our readers a happy, safe, and prosperous New Year. We hope that, in 2008, you’ll have time to enjoy your precision rifles, and spend more time at the range, hopefully with good friends that share your “addiction to accuracy”.

As the site grows in popularity, we hope to expand the features and the content offerings on the site in 2008. You’ll see more videos, more in-depth interviews with top shooters, and more comprehensive product tests. We’re already gathering products for a chronograph “shoot-out” that should “bust” a few myths and provide rock-solid info for shooters. We plan to comparison-test front rests, and review many of the great new scopes coming out in 2008, including new offerings from March, Schmidt & Bender, and Sightron. And we’ve got new Cartridge Guides in the works.

But to do all that, we need your support.

As your Editor, Moderator, Photo Guru, Videographer, and Site Programmer, I’m maxing out on the number of hours available in each week. I work seven days a week on the site, weekends and holidays included. For the site to continue to expand its content, we need to bring in paid helpers. Right now, Quantcast.com estimates the site reaches nearly 35,000 shooters every month. If the majority of those users could provide a small donation every year, we could deliver MORE stories, MORE tests, MORE Gun of the Week features, and provide more of the photos and videos everyone enjoys. (Yes commercial sponsors help greatly, but their contributions alone won’t do the job.)

In the past month a couple dozen guys have generously donated to the site. I want to again thank all those who have contributed. One staunch supporter of the site donated $750.00 yesterday. (Thanks Joe… you’re the man!) But that still leaves tens of thousands of users who use the site regularly without contributing one penny.

Here’s my proposal. First, if you have used our FREE Classifieds to successfully sell your rifles or shooting gear, consider sending in a dollar or two from your sale proceeds. Second, for those who use the site regularly, consider donating One Dollar a Month. That’s less than the price of a cup of coffee and much less than many websites now charge for their “premium content areas”. Consider this — what do you pay for a movie ticket these days? Probably $7-8 dollars for 90 minutes of escapism. For a buck a month you can help this site provide a YEAR’s worth of info, tests, and shooting news that you won’t find anywhere else.

Making a donation to the site is simple and easy. Scroll to the bottom of this page and click on the Donation Link. You don’t need a Paypal account. Any sum is welcome–donations need not be large. If 20% of our readers gave even $5.00 a year that would enable us to hire a regular staffer to do research, create videos, and do field tests.

If you don’t like to deal with Paypal, you can send a check. Make the check payable to our 1000-yard editor Jason Baney and mail it to:

Jason Baney
P.O. Box 308
Douglassville, PA 19518

Permalink News Post comment »
January 1st, 2008

Rem 700 Replacement Bolts from PT&G

Dave Kiff of Pacific, Tool & Gauge (PT&G) has been making complete replacement bolts for Remington 700 actions for quite some time, but many of our readers may not be aware of this PT&G product. Why would one need a replacement bolt? First, this allows you to have different bolt-face sizes for the same action. For example, with two bolts you could shoot both a .308 Win and a 300 WSM from the same action. Second, the PT&G bolts are precision machined to the internal dimensions of your action. If you are having your Rem 700 action blue-printed (accurized) by a gunsmith, a new bolt from PT&G completes the job perfectly, and will give you a more precise-fitting bolt with less internal slop.

Pacific Tool Gauge Remington Bolt

As Vince Bottomley explains, it may actually be more cost-effective to purchase a new bolt, rather than have your existing bolt milled and machined in the blue-printing process: “Accurizing a Rem 700 action is not a simple or cheap process. A lot of the work will be to the bolt itself — truing the lugs, skimming the bolt-face, fitting a Sako style extractor, new bolt-knob and maybe a new firing-pin. Even then, unless you have the bolt sleeved, it will rattle like the old clunker it probably is! Don’t waste your money! Go for one of the replacement bolts from Pacfic Tool & Gauge. PT&G offers a new bolt complete with new bolt-handle, firing pin, spring etc and the bolts come in different diameters so that you can get one to exactly fit your Remington action. This of course requires some accurate measuring, so it’s best to get your gunsmith to order the bolt. They are [a great] value and will cost a lot less than up-grading your existing bolt.”

Pacific Tool Gauge Remington Bolt

Rem 700 replacement bolts start at about $125.00 for the bolt body only (complete bolts are also offered). PT&G bolts are available with either a standard Remington extractor or a Sako-style extractor, with .223, PPC, .308, or magnum bolt faces. The tolerances rival that of the bolts found in custom actions. You can order direct from PT&G in Oregon, (541) 826-5808, or you can purchase through vendors such as MidwayUSA.com, (bodies only, search for “PTG Bolt Body”). If you want a custom spec bolt, it’s probably best to have your gunsmith deal directly with Dave Kiff at Pacific Tool.

Permalink Gunsmithing, Tech Tip 40 Comments »
December 31st, 2007

Bargains Galore on "The List"

If you’re looking for a great deal on a “pre-owned” precision rifle, visit Bob White’s Shooter’s Corner website and check out “The List”. Bob maintains a wide selection of used benchrest, varmint, and precision rifles. In fact, Bob offers the largest inventory of used benchrest rifles and equipment in the USA. Along with complete rifles you’ll find accessories, rests, scopes, and reloading tools. Unfortunately “The List” hasn’t been updated recently, so you may want to call Bob White directly to find out the latest offerings: (973) 663-5159; email: shootcnr [@] optonline.net.

Bob White Shooter's Corner

You can find exceptional deals on “The List”, with complete custom-action BR rifles for as little as $1300.00, and Varmint Rifles starting at $500.00. Here are some representative samples (all subject to prior sale):

B10. 6PPC Light Varmint, Borden TPE R/R action w/ejector; Hart 3-groove bbl w/.262 nk, 800 rnds; Jewell 2-oz. trigger; includes Kelbly scope bases; Gunsmith: Borden Accuracy; 99% cond. Former owner J. Borden’s own rifle & very accurate. $2295.

B44. 6PPC HV & Cruiser, R/L Panda action, Lilja HV and Cruiser, and Spencer cruiser bbls all w/.262 nk, 1100 rnds, McMillan F-glass glue-in stock, Jewell 2 oz. trigger, Gunsmith Spencer. Choice components w/bbls to practice & compete. Exc. cond, $1798. w/1 bbl; $150. ea. add’l bbl.

V15. 223 Ackley Cooper, Mod 21 varminter; factory SS bbl, less than 400 rnds; factory wood stock; factory crisp 1½ lb trig; includes scope mnts, 85 loaded ctgs & 40 once fired cases; 98% cond. Great caliber-Great gun-Great deal. Also used Redding dies @ $40. $950. (New value $1200.)

V25. 22 BR Carry Varminter, Rem 700 action, Shilen SS match bbl 24″ cryoed #4 contour w/.247 nk, 400 rnds, factory wood stock w/pillar glassbedding, factory Rem 2-lb trigger, includes Leupold scope mnts and 100 loaded ctgs, Gunsmith: Kelbly, Inc, exc condition. This 7¾ lb beauty gives 4100 fps w/40 grain bullets, $795.

Permalink Gunsmithing, Hot Deals Post comment »
December 31st, 2007

Leatherman MICRA Multi-Tool — $9 Each (Two or More)

The Leatherman Micra is a versatile, ultra-compact Multi-tool. Not much bigger than a Swiss Army Knife when folded, the Micra may be the ultimate “urban survival tool”. Closed, it is only 2.5″ long, and it weighs just 1.75 ounces. It has knife blade, scissors, nail file, ruler, bottle opener, and both regular screw-driver and flat Phillips heads. You get all that utility in a package that will fit on a keychain! (Be careful though–you can’t carry the Micra on an airplane as it’s not TSA-approved)

Right now the Leatherman Micra is on sale at Wideners.com for just $12.00. Or, if you buy two or more, they are just $9 EACH. That’s a great deal. NOTE: These are surplus items, but they are in “like new condition” according to Wideners. We’ve checked extensively around the web. REI sells new Leatherman Micras for $25.95, and the cheapest price we could find (other than Wideners) was $19.00 per unit.

Leatherman Micra Tool $9 each

Here is a user review from REI.com: “I put it on my keyring that I carry with me just about everywhere. One place it can’t go is on commercial airlines, since it includes a sharp blade. Probably my favorite tool is the Phillips screwdriver–it works better than most dedicated screwdrivers. The knife and scissors do a great job for light cutting work as well.”

Permalink Hot Deals Post comment »
December 30th, 2007

Truck-Vault for Secure Rifle Transport

A custom, high-end Benchrest, F-Class, or High Power rifle can cost upwards of $4000.00. Some of the latest scopes (March, Schmidt & Bender) cost $2000-$2800 by themselves. If you’re transporting three or four “ultimate rifles” with premium scopes to the range, you could be hauling $16,000 worth of firearms. Bring along a rangefinder, Co-Axial rest, spotting scope, and chronograph, and that could push the total closer to $20,000.

How do you safeguard that kind of investment (without driving around in a Brinks armored truck)? One of the best storage systems available is the Truck-Vault, built in Washington state. Truck-vaults are custom-fitted, locking storage cabinets that fit in a Pick-up truck bed, SUV, or station wagon. Various designs are available, including a waterproof “Extreme Series.” Both single-drawer and multi-draw layouts are offered with lengths up to 60″ overall, and top-load capacity of 2000 pounds. A variety of interior configurations are available.

For transporting scoped match rifles, we suggest Truck-Vault’s “Magnum Line”, which has two drawers with 10.5″ of vertical clearance. This offers two primary sliding compartments (on roller casters), plus smaller storage boxes where you can keep valuable gear securely out of sight.

Truck-Vaults carry a big price-tag. SUV models start at $1415, but expect to pay closer to $2000.00 for a unit with all the bells and whistles. That’s serious money, but you have to balance that against the cost of the firearms and accessories you are transporting. If you spend much time on the road with a pricey collection of guns, optics, and accessories, a Truck-Vault may be a wise investment. This editor first saw a Truck-Vault on a Chevy Suburban belonging to an Arizona gunsmith who does a lot of work for the military. It was not unusual for him to haul $50,000 worth of Class III weapons. For him, the Truck-Vault was an essential security feature. For more info, visit TruckVault.com or call (800) 967-8107.

CLICK HERE for Truck-Vault VIDEO DEMO

Permalink Gear Review 1 Comment »
December 30th, 2007

Custom Rifles on Forum Classifieds

This recent Forum Classifieds listing from member EdwinD drew our attention. This gives you a chance to pick up near-new precision rifles built by some of America’s most respected gunsmiths. If you’re looking for a custom rifle in the calibers offered, this is a very attractive “For Sale” list:

MATCHING PAIR of BATS built by the professor, Thomas “SPEEDY” Gonzalez:

(1) BAT 3-Lug, RB/LP/RE, Krieger 8-twist HV 28″ spiderweb barrel, Jewell trigger, Robertson LV “SGY” stock, polished butt plate, trigger guard, and action. Grey/silver stock. 6 BRX, .272.

(2) The other rifle is 14-twist, dark blue/pink stock. 6 BRX, .272.

Both rifles are chambered with a no-turn neck, .272, 6 BRX, PT&G gauge reamer. Both rifles are “glue ins” and have been shot less than 100 rounds. $3,000.00 each plus shipping to your FFL.

Ultimate F-Class Rifle by Speedy
Epitome of F-CLASS, Stiller “F-Class” SS #007 action, Krieger 1.25″ straight contour, 8-twist, 28″ spiderweb barrel, Robertson’s F-Class stock Red/Silver vented w/ adjustable comb and pad, glue in, chambered in 6 BRX with .272 no-turn neck. Rifle fired appr. 250 rounds. $3,700.00 plus shipping to your FFL.

Two Rifles built by Richard Franklin:

(1) First rifle is RFD, RB/LP, Douglas 1.25″ straight contour. Polished 10-twist barrel, Jewell trigger, Franklin 008 stock with butt pad beautifully clear coat finished and pillar bedded. Chambered with Richard’s no-turn neck, 6nn P.O. Ackley reamer. Rifle fired appr. 250 rounds

(2) Second rifle is Stiller “Diamondback”, RB/LP, Douglas 1.25″ straight contour, 14-twist polished barrel, Jewell trigger, Franklin “Lowrider” stock with butt pad. Beautifully clear coat finished and pillar-bedded. Chambered with Richard’s no-turn neck, 6mm P.O. Ackley reamer. Rifle fired appr. 310 rounds. $2,700.00 each plus shipping to your FFL.

Pair of rifles built by Jerry Simison/Tony Larson.
Jerry did gunsmithing, metal work, and Tony made and did stock work and finish.

(1) First rifle BAT 2-lug, RB/LP with action lug, Douglas HV. 8-twist barrel, Jewell trigger, Tony Larson Cedar/Carbon Fiber laminated long range stock, polished butt plate, glued in and clear coat finished by Tony. Jerry chambered this rifle with his 6 “COYOTE” reamer (similar to a 6XC). Rifle fired appr. 74 rounds.

(2) Second rifle is BAT 3-Lug, RB/LP/RE, Douglas HV. 8 twist barrel, Jewell trigger, Tony Larson Cedar/Carbon Fiber laminated long range stock, polished butt plate, glue in and clear coat finish by Tony. Jerry chambered this rifle in 6BR with .272″ no-turn neck. Rifle fired appr. 50 rounds. $3000.00 each plus shipping to your FFL.

CLICK HERE for PHOTOS of ALL GUNS

The seller, EdwinD, says: “ALL of these rifles are pristine and SHOOTERS.”

Permalink News Post comment »
December 29th, 2007

F-Class Spotting Scope Stand

Here’s a smart product from Ray-Vin.com that lets prone shooters mount their spotting scopes in the ideal viewing position. The $228.00 F-Stand is solid and sturdy, and “floats” the scope close to the shooter’s head without interfering with the placement of a front pedestal rest or ultra-wide bipod. The base can sit off the shooter’s mat.

Ray-vin fstand

Ray-vin fstand

The F-Stand is shown with Ray-Vin’s $85.00 Scope Head. This is a very nice unit that allows the shooter to adjust scope height, rotation (around the stand shaft), scope angular elevation, and eyepiece orientation, all with one control. Some other scope heads, though more expensive, require you to use multiple knobs or friction adjusters. Conveniently, most of the adjustments can be done easily with one hand, using the black adjusting handle. Smart engineering we’d say.

Ray-vin fstand

You can see that the F-Stand places the spotting scope right where the shooter wants it, yet the legs do not interfere with the shooting position. A heavy-duty milled metal bracket clamps the base stud and scope rod securely. The F-stand will hold even heavy 80mm spotting scopes without flexing.

Ray-vin fstand

Ray-vin fstand

Here are some comments from F-Stand Users:

“I bought your stand because of the one handed adjustments, not the mention the base itself stays off my mat. I’m very happy with my purchase.” — M.G., Puyallup, WA

“Used my stand all winter in practice… trip to Chilliwack, BC in August. I never felt so comfortable behind a scope before. Infinite adjustments and stability. Thanks for the greatest device….” — N.P., Chico, CA

Permalink Gear Review Post comment »