|
|
July 3rd, 2007
Sinclair Int’l has a new product that can make your front rest more secure, and easier to level on a bench. The Sinclair Superfeet, item 04-190, are 2″-diameter stainless disks with a layer of neoprene on the bottom side. The top dimple holds the rest foot point with no wobble, and the neoprene underside is secure on bench surfaces of concrete, wood or glaze-coated concrete. Your rest won’t shift or slide when you push the rifle forward. Sinclair tells us “With the Superfeet, you don’t need to hammer the rest screws into the bench top. And most shooters find that their speedscrews or elevation cams work better with Superfeet”. Sinclair’s Superfeet come in a set of three for $19.95.

The Sinclair design is similar to the Match Superfeet created by Dave Dohrmann. Dave’s Match Superfeet are also 2″-diameter stainless disks with neoprene on the bottom. But Dave’s Match Superfeet also have spring attachments, which connect the feet to the rest. This makes it easier to pick up the entire rest and reposition it. The spring attachments also ensure that the system is completely legal in IR 50/50, NBRSA and IBS Competition. A set with 3 discs and 3 spring retainers is $29.95, while a set with 3 discs and 2 retainers is $27.95. Contact Dave at (864) 884-0155 or via email dbugholes [at] aol [dot] com to order his Match Superfeet.

July 3rd, 2007
Credit German Salazar for this smart tip. 6XC dies tend to be pretty expensive. If you already have a 6BR neck-sizing die, you can use it to neck-size 6XC brass. Redding Reloading sells a set of three washers that raise the die in the press, part number 80901. Each kit includes three spacers: (.062) No-crimp or partial resizing, (.125) 44 Spl/44 Mag spacer, (.135) 38 Spl/357 Mag spacer. If you buy two sets (about $7.00 each at Bruno Shooters Supply) and use both 0.125″ spacers and one 0.135″ spacer then you can neck size 6XC cases with your 6BR neck sie without messing with the lock ring setting. You can also use the same spacers to switch pistol dies (e.g. between .38 Special and .357 Magnum). Hornady also sells inexpensive .135″ spacers to switch from .38 spl to .357.
July 2nd, 2007
The Suhl 150 is a great rimfire match rifle. This East German 22LR can be as accurate as an Anschütz–you’ll just find the Suhl a bit rougher around the edges. Suhl barrels can be very accurate–some Suhl factory tubes are benchrest competitive. Many Suhl 150s have been converted into succcessful BR and Silhouette guns. Joe Friedrich won the ARA 2006 Grand Agg shooting a Suhl 150 with custom McMillan stock and aftermaket barrel. Florida’s Century Arms recently acquired a supply of the hard-to-find Suhl 150s. Two models are offered–a prone rifle with straight comb, and a position model with adjustable cheek-piece and more vertical pistol grip.

Century Arms has a couple dozen of the Suhl 150s left, with the “dealer” prices running about $610-$630 (Century will not sell direct to individuals, so you’ll have to purchase through your local dealer.) These are used guns, so they vary in cosmetic quality. Most of the rifles include front and rear iron match sights but NOT extra inserts or separate tool kits. If you’re looking for a high-quality smallbore rifle for considerably less money than an Anschütz 54, call Century Arms at (800) 527-1252. These guns will sell out quickly as Suhl 150s are no longer being made and the supply of good, used guns is drying up.
July 2nd, 2007
CCI offers a fun interactive “shooting gallery” game that lets you plink at varmints. CLICK HERE to load the game (requires Flash-enabled browser). It starts off easy, but then you need good reflexes (and a fast mouse-finger) to tag all the critters as they pop out of tin cans. Among the various Flash shooting games, this is one of the best. Note: it’s not necessary to enter a user-name or password–that’s only if you want your score recorded. WARNING–This game can be addictive. Also there’s some realistic sound effects so you may want to turn down your speakers if you’re at work. Have fun!

July 2nd, 2007
Here’s a great way to use an existing Stoney Point-style bullet comparator to measure smallbore case rim thickness. The Stoney Point tool, now sold by Hornady as the “Lock-N-Load Bullet Comparator“, comes with a red comparator body into which inserts of various calibers can be fitted. If you have a 6mm (.243) insert for the comparator, you can use it as a “poor man’s” rimfire rim-thickness gauge. It works perfectly for 22LR and 17HM2–just drop the rimfire round to be measured in the hole, and then slide the unit against the caliper jaws. For a slightly tighter fit, use the .223 insert and ream VERY slightly. But we think you’ll find the standard 6mm insert is just about perfect. We were able to get repeatable readings to about .0005″. This is an ideal “Zero-Cost” adaptation of a popular tool.

July 1st, 2007
Germany’s Werner Mehl is the talented engineer who created the PVM-21 infrared chronograph, in many respects the most sophisticated ballistic speed-measuring system currently available to the general public. Werner runs a company, Kurzzeitmesstechnik, which specializes in high-tech ballistic measuring systems and ultra-high-speed photography. Werner has engineered camera and lighting systems that can literally track a bullet in flight, millimeter by millimeter, with eye-popping resolution. Werner employs digital cameras that record up to 1 million frames per second, with effective shutter speeds as fast as 1.5 nano-seconds. The videos produced by Werner’s systems are amazing. Below are two short samples. The first shows a 7mm bullet penetrating cardboard. Note you can clearly see the engraving of the rifling on the bullet. CLICK HERE to watch VIDEO. (Right click and “save as” to download video.)

The second sample shows a lead 22LR bullet hitting a steel silhouette and disintegrating. Below is a low-frame-count version (for quicker page-load). But CLICK HERE to watch the full 1.9 megabyte version with a higher frame rate. It is much more impressive, as it reveals the complete bullet disintegration in great detail.

To view more videos and learn more about the impressive PVM-21 chronograph, visit Kurzzeit.com. More of Werner’s high-speed gun videos can be accessed via this LINK. In the USA, Werner’s PVM-21 chonograph, which works even in complete darkness, is sold by Neconos.com. The PVM-21 offers a unique combination of compact size and superior performance. It even comes with a TV-style remote control and a complete software package allowing you to track PVM-21 chrono data with a personal computer.
July 1st, 2007
Every precision reloader should have a quality tool for measuring case-neck wall thickness. This is essential for those who turn necks–to check the results of your turning. Even if you prefer no-turn necks, a case neck gauge lets you check your neck dimensions and sort cases by neck wall thickness and uniformity. Consistent neck tension is critical for accuracy–but without uniform neck-wall thickness neck tension is hard to control. The new Redding Case Neck Gauge, released in late April, has many notable features. First, it has an integral base. This can be screwed to a bench-top, placed in a vise, or simply held in place with a clamp.

The pilots are stainless steel with a smart design. First, on the inboard end, the pilot is slightly under-cut so it doesn’t give a false reading based on slight imperfections in the case mouth. On the other end, there is a step-down (i.e. reduced radius). This provides extra clearance around the neck-shoulder junction, where a doughnut may exist.
With this “smart shape”, the pilot ensures you are getting accurate read-outs of the critical area of the neck-wall. The pilot also rides on a shaft with pins on each end that fit in the case flashhole. This keeps the case centured on the pilot. The Redding Case Neck Gauge (item 26400) ships with two pilot stops, #06121, for .22 caliber and #06130, for .30 caliber. If you use this with a 6mm you’ll need to order pilot #06122 for BR style small flashholes, or pilot #06124 for large flashholes (e.g. with 243 Win brass). The new Redding Case Neck Gauge is available from Grafs.com, Midsouth Shooters Supply, and other vendors for about $65.00, including .001″ dial indicator.
June 30th, 2007
If you want to test your long-range shooting skills against some of the best shooters in the country (including our own Jason Baney), head to Pennsylvania in two weeks for the Williamsport World Open. Shooters will compete in Light Gun and Heavy Gun classes for a host of prizes including scopes, actions, and barrels. Sponsors include Nightforce Scopes, BAT Machine, and Bartlein, Hart, and Krieger barrel-makers, among many others. In addition, the Original Pennsylvania 1000 Yard Club will give $1000.00 CASH to anyone breaking the 3.151″ Ten (10) Shot Heavy Benchrest Class World Record during this event. Also for 2007, this will apply as well to anyone breaking the 3.835″ Light Gun group record.

Last year Jason won the Heavy Gun championship shooting his 16-lb 6BR with Reloader 15 and Clinch River 106s. That was an amazing accomplishment considering he was competing against 60- and 70-pound guns driving ultra-high BC bullets with “big boomer” cartridges. The schedule of events will be: Saturday Morning – Light Gun Match One; Saturday Afternoon – Heavy Gun Match One; Sunday Morning – Heavy Gun Match Two; Sunday Afternoon – Light Gun Match Two. Complete Event info, including Course of Fire, Rules, and a list of nearby motels, is found on the World Open Webpage, or contact Matt Dienes, 724-479-0790.
June 30th, 2007
If you have ever done much action pistol shooting at close range on steel targets, you’ll know about the hazards of ricochets and bullet splashback. That’s why you should only shoot low-velocity rounds with soft lead or frangible bullets when shooting at relatively close range. In this video a rather ignorant (yet lucky) fellow demonstrates what NOT to do with a large-caliber rifle (a 50 BMG apparently). He shoots at a steel target about 70 yards away and a bullet fragment comes back directly at him. He was lucky enough that the ricochet just smacked his left ear muff. Another inch to the right and he could have lost his eye… or worse.
Click HERE to WATCH Video (LiveLeak)

The video should be self-starting if you have the Flash plug-in.
Lesson learned–never underestimate the destructive power of rifle-launched projectiles. What appears a “safe distance” from steel may actually be well within the danger zone.
June 30th, 2007
This deal is almost too good to be true. MidwayUSA is currently offering its Wheeler Engineering Rotating Shop Vise (item 666-974) for just thirty bucks even ($30.00). That’s $39.99 off the regular $69.99. This unit has a rotating head that can turn 360°, then lock in place with a built-in clamp. It mirrors the design of the $249.97 “Multi-Vise” sold by Brownells.com. Note, with this design the head only rotates. It does not tilt or swivel. But it’s still way more vesatile than a conventional shop vise and it does pretty much anything the green $250 Multi-vise (photo right) will do at less than 1/8th the price. If you need a swiveling vise for your loading bench, here’s your opportunity. The cast iron Wheeler vise weighs 18 pounds and has 3-1/2″ jaws that open to 4-3/4″.

|