The 2024 Southwest Nationals (SWN) concluded Sunday, February 18, 2024. It was a great event this year, with very close competition and some spectacular scores being shot in all divisions. We congratulate the new SWN Long Range Champions: Jay Christopherson (F-Open), Brad Sauve (F-TR), and Philip Crowe (Sling). We also congratulate the talented 600-Yard Champs: Tod Hendricks (F-Open), Tom Hubbard (F-TR), and Jarrod McGaffic (Sling).
This is Jay’s second SWN Long Range Championship — the talented F-Open shooter also won in 2020 (SEE Jay 2020 Report). Jay was on a roll through the competition, not dropping a point until the last day and finishing with 1248-79X, just two points from a 1250 “clean”. F-Open runner-up Tim Vaught finished just one point back at 1247-83X, and Tim had the highest X-count among all F-Open LR competitors.
Tod Hendricks, a team-mate of Jay C. on Team Lapua-Brux-Borden, won the F-Open 600-yard competition with 600-52X. Notably, the Top Ten F-Open Shooters at 600 all finished “clean” with 600 points, so the rankings were decided on X-Count.
Senior F-TR ace Brad Sauve (1245-71X) also shot a brilliant Long Range match, finishing a full five points ahead of second place Tom Hubbard (1240-67X). Sauve also notched the highest X-Count among all F-TR shooters. Very impressive performance by Brad this year. And we should note that Tom Hubbard won the F-TR 600-yard competition held earlier in the week, nailing an excellent 599-38X.
F-Open Champion Commentary
We had a chance to talk with 2024 SWB F-Open Champion Jay Christopherson. Jay stated that, for most of the match, conditions were very good. But Jay also noted that the general level of accuracy for F-Open improves with each season.
Observations by F-Open Winner Jay Christopherson — Wind Wisdom and More…
1. The wind was pretty mild all week. I personally never held more than 4 lines of wind (mostly on the left), with zero wind dialed on my scope.
2. A solid wind zero was absolutely key. I saw and heard plenty of people talking about conditions that just didn’t exist. In most cases, my guess would have been a bad wind zero, which would have had you chasing your tail or thinking that the mirage or flags were lying.
3. I’ve never seen so many cleans (i.e. no dropped points, all ten scores) at long range in my life. In my opinion, E-Targets are the catalyst for this. The data and instant feedback you get help set the bar extremely high. It’s much easier to really understand what a good load looks like using an E-Target.
4. I had a plan for the wind coming in to each relay (usually developed during prep time). Most of the time, my plan worked out pretty well, but being ready to stop and execute a backup plan is a really useful skill to develop. It worked out for me on the last relay.
5. Even though I won the F-Open class, I still learned a few things watching the shooters around me — there’s always something nifty to learn if you are paying attention.
Great Performance by 2024 F-TR Champion Brad Sauve
Brad Sauve shot superbly to secure the overall F-TR Aggregate win at the 2024 SWN. Brad dropped only one point during the Palma match, was clean during the first day of the LR Aggregate, and finished with a 1245-71X, setting at least three new National Records in the process (one a 200-18X at 1000 yards). We commend Brad on his remarkable 2024 performance.
F-Open LR Top Ten
Jay Christopherson 1248-79X
Tim Vaught 1247-83X
William Kolodziej 1247-74X
Johnny Ingram 1246-82X
Norman Harrold 1246-69X
David Christian 1245-74X
Peter Johns 1245-73X
Erik Cortina 1244-76X
Brandon Zwahr 1244-73X
Jim Murphy 1241-71X
F-TR LR Top Ten
Brad Sauve 1245-71X
Tom Hubbard 1240-67X
Alan Barnhart 1237-55X
Brad Traynor 1234-47X
Eric Bisson 1233-58X
Joaquin Bolsa 1231-56X
Carl Matthews 1231-52X
Robin Retzloff 1231-52X
Robert Garibay 1231-39X
Michael Walters 1230-41X
SLING LR Top Ten
Phillip Crowe, 1243-60X
Justin Skaret, 1242-74X
Verne Conant 1241-59X
Nate Guernsey 1240-66X
Trudie Fay 1240-61X
Jarrod McGaffic 1239-62X
Oliver Milanovic 1237-75X
Justin Utley 1237-59X
Nicole Rossignol 1236-66X
Benjamin Lucchesi 1236-62X
F-OPEN 600 Top Ten
Tod Hendricks 600-52X
Johnny Ingram 600-46X
Erick Cortina 600-42X
Ted Wedell 600-42X
Barry Holcomb 600-42X
Jim Murphy 600-41X
Dan Di Leva 600-40X
Roger Mayhall 600-40X
Lou Murdica 600-38X
David Christian 600-36X
F-TR 600 Top Ten
Tom Hubbard 599-38X
David Park 599-28X
Mike Sowa 598-39X
Brad Sauve 598-34X
John Moreali 598-26X
Chrstopher Faloon 597-41X
Oleg Savelyev 597-36X
Jeremy Newell 596-36X
Eric Bisson 596-36X
Brad Traynor 596-35X
SLING 600 Top Ten
Jarrod McGaffic 600-42X
Trudie Fay 600-39X
Nicole Rossignol 600-35X
Tom Whitaker 600-28X
Oliver Milanovic 599-45X
Adam Fitzpatrick 599-43X
Zevin Linse 599-39X
Benjamin Lucchesi 599-38X
Kimberly Rowe 599-37X
Justin Utley 598-37X
2024 SWN F-Open, F-TR, Sling TEAM Matches Top Five
F-OPEN Team Match
Team Vihtavuori 2589-156X
Bayou Boys 2580-155X
Team Grizzly 2577-128X
Team Lapua-Brux-Borden 2576-162X
Team Canada Red 2571-131X
F-TR Team Match
USA F-TR KWS 2561-112X
Team Texas 2558-100X
Canadian Gun Runners 2554-126X
USA F-TR Blue 2554-112X
USA F-TR Red 2550-118X
Sling Team Match
U.S. Palma MRNAK 2580-150
Brits Abroad 2573-112X
U.S. Palma Gross 2567-128X
Canada Red 2563-127X
USAMU 2554-146X
SEB MINI Rest — Good for Gold (Twice), Silver, and Bronze
You don’t necessarily need the newest or most expensive equipment to succeed in Long Range competition. Jay Christopherson won the F-Open division using an older MINI STANDARD rest with a standard front bag. See the unit at right. Jay says it works great, and is easier to transport that some of the very large heavy, benchrest-style front rests. Jay has now won the SWN match twice with this rest, finished second in 2017, and third in 2018.
Jay sent a message to Sebastian Lambang, creator of the SEB MINI: “Hi Seb, I thought you might like to see a picture of the rest that took Silver in 2017, Bronze in 2018, Gold in 2020, and Gold again in 2024. A little older, a little more wear and a lot more mileage, but still winning when it counts. Thank you for such an amazingly reliable rest. I always enjoy the fact that the original MINI still gets it done. Winning the 2024 SWN still using the original one-piece bag generated a bit of a conversation on the line. I think my rifle rest setup was the easiest one to inspect by far for Matt [Schwartzkopf] and his team.
Modern F-TR rifle looking down-range at Ben Avery Shooting Facility.
Top competitors show focus and concentration in mid-range match 2022.
Stunning F-Open rifle with SEB Mini front rest with Blake Machine accessories.
Working in the pits is part of the Berger SWN experience.
Hundreds of Competitors from the USA and Many Other Countries
Along with top American F-Class and sling shooters, the Southwest Nationals attracts competitors from around the world.
Photo by Nancy Tompkins near Ben Avery Shooting Facility in 2022. Nancy posted: “Thank you to all of the sponsors, volunteers, and shooters who have traveled from all over… to make this match so special.”
See you next year!
This article Copyright 2024 AccurateShooter.com. Any republication on a different website is unauthorized.
Ever wondered how the parts inside an AR15 work together? Just exactly how does the reciprocating bolt carrier feed rounds from the magazine? How do the elements in the trigger group work and reset after each shot? How does the gas system bleed gas from the barrel and operate the bolt carrier? These and other questions are answered in this eye-opening video from 45Snipers. Using “cutaway” 3D computer animation, this 5-minute video shows all features of an AR15 inside and out. This fascinating firearms animation allows the viewer to look inside the upper and lower receivers, into the bolt carrier, chamber, barrel, and magazine.
This video starts off slow and has annoying background music, but it is well worth watching if you own or shoot any AR-platform rifle. It illustrates all the key operations during the charging, loading, firing, and ejection processes. The cutaway animation shows how rounds are stripped from the magazine and then chambered. It then shows how every part of the trigger group works, and how the firing pin strikes the primer. You can even watch the bullet move down the barrel before the empty shell casing is removed from the chamber and tossed out the ejection port. Here are sample frames from the video:
Video find by Grant Ubl. We welcome reader submissions.
Right now you can get HUGE SAVINGS on Sightron competition scopes at Creedmoor Sports. Save $630 on fixed-power optics, save $680 on 8-32x56mm SIII models, and save a whopping $1440 on the latest, advanced 10-50x60mm SV ED models. Other Sightron competition scopes are discounted $680 to $740, so you can save up to 40%. Don’t hesitate — these prices are good for just ONE MORE WEEK. This Sightron SALE concludes on February 29, 2024.
Save $1440-$1500 on Outstanding SV ED Series
The Sightron SV ED 10-50x60mm SFP is a great choice for F-Class, ELR, and long range target shooting. The 34mm body tube with ED glass provides 70 MOA elevation and 60 MOA windage. Large oversized tactical turrets with 1/8 MOA clicks provide 10 MOA per revolution. The patented F.A.S.T focus system provides two focus dials; the first operates like a standard quick acquisition focus knob, and the second provides a 4 to 1 gear reduction for smooth fine focus. Models include the 10-50×60 ED Target Dot .1 and 10-50×60 ED Zero Stop Target Dot .1.
Save $630 on SIII 36X and 45X Competition Models
Sightron SIII riflescopes are high-quality, non-zoom, single high-magnification optics for competitive shooting disciplines. Choose 36 power or 45 power. These are great choice for benchrest for score and group shooting. Models with Instant Savings are the 36×45 ED with Fine Cross Hair reticle, 36×45 ED Target Dot .125 reticle, 45×45 ED with Fine Cross Hair reticle, and 45×45 ED Target Dot .1 reticle.
We first ran this story a few years back. We’re republishing it today as a reminder to our readers that safety should be their paramount concern at the range. Avoid distractions and always check your barrel for obstructions before you chamber a round or pull the trigger. A moment of inattention can result in a catastrophic kaboom.
Discharging a .338 Lapua Magnum round with a cleaning rod in the barrel — that’s a recipe for disaster. What happens when a fired .338 caliber bullet and a cleaning rod try to occupy the same place at the same time? Well you get a catastrophic kaboom, with metal pieces flying all over the place, and a shooter very lucky to escape without serious injury. This incident occurred recently in Manatee, Florida, as reported by Sniper’s Hide member Queequeg. We thank SnipersHide.com for granting permission to publish these revealing images in the Daily Bulletin. CLICK HERE for more Kaboom info from the ‘Hide.
This story should serve as a chilling reminder to follow proper safety practices whenever you are at the range. Always check to make sure there is no obstruction in the bore BEFORE loading a live round.
.338 Lapua Magnum + Cleaning Rod + Inattention = Kaboom!
Kaboom at Manatee!
Sniper’s Hide member Queequeg recently published shocking photos of a catastrophic kaboom involving a .338 Lapua Magnum (Savage action). The action was blown off the rifle, shrapnel went through the roof, and the barrel split at the tenon before taking an excursion downrange. The action did crack in the front but the lugs remained engaged so the bolt did not slam to the rear (luckily for the shooter).
Here’s the report: “This happened [January 20, 2014] at the Manatee Gun and Archery Club. Al, Ren and myself were there with a couple other folks. Ren was at bench 12, I was at 13. The fellow at 11 was running a Savage .338 Lapua. He had a very bad day! He damn sure could have killed himself and quite likely Ren as well.”
Queeqeg added: “After the boom, I heard Ren ask ‘Are you alright’ and then turned to look in time to see the fellow reacting in total shock — literally stunned. Ren and I went over to him and could not see any major injuries. Ren was uninjured as well but had a lot of fiberglass splinters on him. The barrel nut is what I presume punched the two holes in the roof. The shooter is a regular there[.] He had been having a problem with sticky cases though he said he was certain the loads were mild. That’s why he was content to knock the sticky ones out with the rod. He simply forgot to remove the rod after knocking out the last stuck case. You can see what happened next.”
To learn more about this incident, go to the original Snipers Hide Forum Thread. There you’ll find more details and four pages of related discussions.
The Important Lesson Here
What did the .338 LM shooter do wrong here? You will say — “Well that’s obvious, he left a cleaning rod in the barrel and then shot a round.” Yes, that was a potentially fatal error. But that was his second mistake — one that occurred only because he made a more fundamental judgment error first.
The FIRST mistake was not acknowledging the problem with his ammo. Had he heeded the warning signs, he would still have a rifle (and an unsoiled pair of trousers). When he first observed that he was having problems with extracting cases, a warning light should have gone off in his head. Presuming his extractor was not broken (and that the chamber was cut properly) he should have been able to extract his brass if he was running safe loads. The lesson here we all need to learn is that if you observe a serious ammo-related issue, it is time to stop shooting. Don’t try to invent work-arounds just to extend your range session, when there are clear signs that something is wrong, very wrong.
Remington is closing its Ilion, New York firearms factory after 208 years of operation — more than two centuries. Over 300 jobs have been lost with operations moved to Georgia. Get the full story from this Fox News video. Ilion’s Mayor, John Stephens, is interviewed. He notes that the factory closure will have a huge negative impact on the city’s tax base and budget and the “nostalgic and historic loss is a bigger burden to bear”. City, county, and state officials are now “actively working on a re-use for the facility”.
Founded in 1816, Remington Firearms remains one of the United States’ largest domestic producers of shotguns and rifles. Several of the company’s strategic products will be manufactured in Georgia. The new headquarters will also become home to an innovative research and development center.
Remington Has a Storied History
Founded in 1816 by Eliphalet Remington in New York, Remington is the oldest continuously-operating gun manufacturer in the United States. Prior to the re-organization, Remington sold more sporting rifles and shotguns than any other American company. Remington has developed more cartridges than any other U.S. company. And for decades Remington was the only American company that sells firearms AND ammunition under its own name. Now Remington ammo is produced in Arkansas, as a separate business. Remington’s ammunition business was acquired by Vista Outdoor, parent of CCI, Federal, RCBS and other major shooting/outdoor industry brands.
The team from Applied Ballistics will offer ballistics services at major matches in 2024. The team will have its advanced Doppler Radar unit which can provide ultra-precise custom ballistic profiles.
Applied Ballistics (AB) has announced the initial deployment schedule for the Applied Ballistics Mobile Laboratory during the 2024 shooting season. The Applied Ballistics Crew will be driving the Mobile Lab Truck and Trailer to a number of important shooting events in 2024. At these events you can get a Personal Drag Model (PDM) for your rifle/load based on Doppler Radar testing. NOTE: You must be actually competing at one of the listed events in order to participate and get a PDM. The first listed deployment will be at the NRL Hunter match in Montana on May 17, 2024. Here is the initial 2024 schedule:
May 17, 2024: Belt, Montana – NRL Hunter
June 7, 2024: Casper, Wyoming – Nightforce ELR
September 11-12, 2024: Grand Junction, Colorado – IPRF World Championships
The Applied Ballistics Mobile Lab trailer carries a vast array of equipment including computers, sensors, and advanced Doppler Radar equipment. The Doppler Radar is employed to create custom ballistic profiles (aka “Personal Drag Models”) for shooters at major matches.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. CDNN Sports — Ruger American Gen II with Scope, $649.99
⏺ Great deal on popular product
Ruger has released a Ruger American Rifle “Generation II” edition, featuring a spiral-fluted barrel and muzzle brake. As sold by CDNN Sports for $649.99, this rifle comes complete with a 4-12x40mm Bushnell hunting scope, 20″ fluted barrel, and gray stock. Many chamberings are offered: .223 Rem, 6.5 Creedmoor, 7mm-08, and .308 Winchester. In addition, for the same $649.99 price, there are versions with FDE tan stock and 16.1″ barrel offered in .223 Rem, 7.62×39, and 300 Blackout. All these Ruger American Gen II rifles come with 4-12x40mm Bushnell scope and rings, adjustable trigger, and Cerakote metal finish.
2. Natchez — Frankford Arsenal Sale, Up to 42% Off
⏺ Great Reloading Kit and save $20-$50 on Frankford Arsenal products
Natchez is running a major Frankford Arsenal Sale right now. If you’re getting started in reloading, the Frankford Arsenal Essential Reloading Kit is a great package for $349.99 ($60 off). This includes the outstanding F-1 Single Stage Press, along with Perfect Seat Hand Primer, Bench Top Powder Measure, Aluminum Powder Funnel Kit, Electronic Calipers, DS-750 Powder Scale, Powder Trickler, and Universal Reloading Tray. This very same Kit is $419.99 at MidwayUSA, $70 more! NOTE: You can also get the very good F-1 Reloading Press by itself for $114.99 at Natchez.
3. Smith & Wesson, Wheelgun Wonderland Rebate, $50 or $75
⏺ Significant rebate on high-quality revolvers
We think every gun fan should have a Smith & Wesson revolver. Right now you can get a significant S&W Rebate on both compact carry revolvers and full-size wheelguns. For the smaller J-Frame (with $50 rebate), we like the Model 638 with alloy frame and shielded hammer. You can also get a big $75 rebate on the bigger K-, L-, or N-frame revolvers. In .357 Magnum, we like the modern L-Frame Model 686.
4. Powder Valley — Popular Alliant Powders IN STOCK
⏺ Grab these great Alliant powders before they sell out
Many of the most popular powders from Alliant and Hodgdon have been very hard to find over the last couple of seasons. Thankfully a huge new shipment of Alliant Powders has been received by Powder Valley. Order your favorite Alliant powders now. Among the many Alliant powders in stock now are: AR-Comp, Power Pro 2000-MR, Reloder 10X, Reloder 15, Reloder 16, Reloder 22, Power pistol and many more. Reloder 15 is a great choice for 6mmBR and 6BRA. With burn rate very similar to H4350, temp-stable Reloder 16 works well in the 6mm Creedmoor, 6XC, and 6GT cartridges while Power Pro 2000-MR works well in .308 Win rifles.
5. Palmetto SA — Rock Island Armory TM22 Rifle, $199.99
⏺ Slick, AR-style rimfire rifle with new features
Looking to get started in NRL22 competition, or want a rimfire varmint rifle with familiar AR look and feel? Then check out the Rock Island Armory TM22. This handsome semi-auto .22 LR rimfire rig weighs 6.5 lbs. with its 18″ barrel. Now just $199.99 on sale, the TM22 sports an AR-type grip, commercial buffer tube adapter, top rail, and M-LOK fore-end. The rifle is set up with right-handed controls, but the TM22 can easily be modified for left-handed operation. The TM22 ships with two 10-rd aluminum magazines with aftermarket 15- and 25-round magazines available.
6. Sportsman’s Guide — CMMG AR Conversion Kit, $169.99
⏺ Save money with rimfire ammo for AR cross-training
The CMMG Bravo .22 LR Conversion Kit provides a replacement bolt/bolt carrier along with three 25-round magazines with special .22 LR-fitted followers and ammo slots. This allows you to shoot rimfire ammo from any AR-15 chambered for the .223 Rem (5.56×45). The CMMG Bravo has an integrated extension that fits into your current chamber. The rimfire bullet passes through this extension and then enters the barrel. This conversion kit is now on sale for $169.99. To use, simply replace the rifle’s .223 Rem bolt and carrier with the Bravo .22 LR conversion unit and load up the included magazine(s) with rimfire ammo.
7. MidwayUSA — Electronic Muffs with Walkie-Talkie, $59.99
⏺ Dual-function electronic muffs — great for range communications
Electronic earmuffs protect your hearing while allowing you to hear range commands. With these Walkie-Talkie muffs you also get 2-way communication capabilities. That lets you talk to folks in the pits or at a different section of your shooting club. The Walker Razor Slim Low Profile Electronic Earmuffs (NRR 23dB) with Walkie Talkie allows you to communicate with other FRS radios. That lets you give range commands or talk with friends without the need for a second radio. If you don’t need the two-way functionality, MidwayUSA also has the NRR 26 Walker’s Alpha Power Electronic Muffs for $69.99, and the slimmer NRR 21 Razor Slim XTRM Muffs for $49.99, $20 off.
8. Natchez — .22 LR Ammo Five to Six Cents Per Round
⏺ Big savings on .22 LR ammo from Federal, CCI, Aguila and more
Right now, at Natchez, you can save big on .22 LR rimfire ammunition. Choose among many leading brands including Federal, CCI, SK, Winchester, Remington, and Aguila, with prices starting at just 5.5 cents per round ($27.49 for 500 rd box).
9. Amazon — ShootingTargets7 AR500 Steel Targets
⏺ Good selection of AR500 steel targets with durable zinc coating
Steel targets are great for fun shooting and tactical training. Right now Amazon offers a line of USA-made Zinc-plated, laser-cut AR500 Steel Targets (#ad) starting at just $7.97 for 3″ diameter gong. Choose from a variety of sizes ranging from 3″ to 16″ diameter and thicknesses 1/4″, 3/8″, or 1/2″. There’s also a 12″x23″ torso target. The Zinc plating on the steel helps prevent rust. The maker says the zinc “is far more durable than paint or powder coat.”
⏺ Essential leveling accessory for 1″ and 30mm scopes — real bargain
Avoid bad rifle canting by using a bubble level fitted to rail or scope. One very affordable option is the Jialitte Scope Bubble Level (#ad). This features a 30mm diameter ring, plus an inner insert ring so it will also fit 1″-diameter main tubes. The Jialitte unit, just $10.99 on Amazon, is nicely radiused with a low profile. User reviews have been very positive. You could easily pay $35.00 or more for a 30mm scope level.
BONUS: FREE Shipping $99+ Orders with Creedmoor Sports
Here’s a nice President’s Day special from Creedmoor Sports. Now through 12:00 pm CST on February 20, 2024 you can get FREE Ground Shipping on most products with an order over $99.00. Use Code PRES24. Creedmoor Sports is also running a big sale right now on Sightron Scopes.
As an Amazon affiliate, this site can earn revenues through sales commissions.
With the skyrocketing prices of ammo, more shooters than ever are hand-loading pistol and rifle ammunition. But many novice reloaders tell us that it’s a bit overwhelming in the beginning. Just learning all the technical terms (e.g. ogive, meplat, ballistic coefficient, load density etc.) is difficult, and the task of selecting the right tools and gear can be daunting.
The first thing a new reloader should do is find an experienced reloading mentor. One can learn the basics much more quickly under the guidance of an experienced hand-loader who “knows the ropes”. We also recommend that newbies acquire a good basic reloading handbook — not just a list of load recipes, but a book that explains the processes.
Since the first edition was published in the 1970s, the ABCs of Reloading series has taught countless firearms owners safe/reliable methods for creating their own ammunition. ABCs of Reloading provides beginners what they need to know to get started in reloading. From basic topics such as “How does a cartridge work?” and “What components do I need?” to more advanced discussions of cartridge pressure, headspace, and chrono testing, this is a great resource for new handloaders.
In addition, the sections on advanced reloading and new powders make the new edition valuable for experienced handloaders. And long-range shooters will benefit from the sections on making ultra-consistent ammo and fine-tuning for precision accuracy. Massaro’s coverage of new reloading gear and components is another bonus (shown below is the new RCBS MatchMaster powder dispenser).
Review from purchaser of “The ABCs of Reloading”, 8th Edition:
“When I first got the itch to load my own ammunition, I was overwhelmed by the amount of information and terminology involved in this fascinating field/hobby. It was very difficult to take all the individual pieces of information that I had and form it into an understandable process. I was snowed in under a blizzard of data that I was piecing together through chat rooms and web sites. Phrases like ‘roll crimp’ and ‘headspace’ came at me in a blizzard. I could look up each phrase, understand each one as a piece, but still the whole picture was fuzzy. In essence, that is what this book will do for you — turn it all into a coherent, linear whole. The writing is very solid and clear, the illustrations are well-done and helpful, and the information is very complete. After reading this book, the entire process made sense to me, and more importantly, I was fully warned about the dos and don’ts of the reloading world. The coverage is very complete. Primers, powders, bullets, and … all necessary tools and accessories are discussed and explained. This is just a great book. It won’t make you an expert … but it will put you on the right road if you wish to become one.” — Mykal Banta
Useful reloading gear does not have to be costly. Here are ten handy (and very inexpensive) items that belong on your loading bench or in your range kit.
• Magnifying Glass – We use a flat, 2″x2″ pocket 4x-8x magnifier. This folds up on itself. Very handy, we use it to inspect bullets and brass. Use this to check your flash holes for burrs, and check the meplats of your bullets before loading.
• Clear 35mm Film Cannister – Use this to transfer the thrown powder charge to the little measuring cup that sits on your scale. That way you don’t get any kernel splash. Also if the charge weight is obviously off, it’s easy to dump back in the measure. A film canister works pretty well as a trickler too.
• Compressed Air in a Can -- Get these at office supply stores. Use the can (with tube attached) to blow crud out of cases after cleaning the neck with a brush, and blast loose debris out of primer pockets.
• Pin Vise – A simple pin vise with a #53 bit is perfect for deburring small PPC and BR flash holes without reaming the flash-holes any larger. The Lapua PPC/BR flash-hole diameter is 1.5 mm, or 0.059″. Amazon.com sells a handy $8.29 pin vise kit with 10 bits, including the ideal 1.5mm bit. Other vendors offer a #53 pin vise bit that measures .0595″ or .060″ (depending or source). You can find pin vises and bits at hobby stores — here’s an example below with ten bits including 1.5mm. Pin vise sets can be found from $7 to $15.
• Bounce Dryer Sheets – The common dryer sheets eliminate “static cling” on your plastic reloading parts such as powder measure cylinders, powder funnels, and reloading press plastic bins. Thanks to Doc76251 for this tip.
• Ballistol Aerosol – Try using this versatile lubricant/solvent for full-length sizing. Spray some on a patch and you can wipe the carbon off your case necks. Then, continue to apply a very small amount of Ballistol on the case bodies — just thin sheen is all you need. Ballistol is super slippery, and easy to remove. For general full-length sizing (on small cases) it works great and doesn’t leave a gooey, waxy, or chalky residue. For heavier case-forming jobs, we recommend Imperial Die Wax.
• Shotgun Mop – Stick this in the chamber when using Wipe-Out foaming bore cleaner. This will seal off the chamber so the foam doesn’t flow into your action. For long chambers screw on one section of cleaning rod to aid extraction.
• Colored Sharpie Marking Pens – Mark your bullets ahead of the bearing surface, and the color transfers to the target. This way you can shoot multiple loads at the same point of aim and discern which load shoots the tightest. (Recommended for 300 yards and beyond). With colored bullet tips you can test multiple loads “round robin” to equalize wind effects. When testing seating depths for example, you can mark the longer-seated set of bullets red and the shorter-seated set green and shoot them during the same sequence. Just look at the colored marks on the target to see which grouped better.
• Thin Latex Gloves – You should keep a box of inexpensive, disposable latex gloves (the kind doctors use) in your loading room. These will prevent contamination of primers or powder kernels that you handle directly. Also, use the gloves when handling fine blued tools or firearms to prevent transfering body oils and salts that promote rust.
• Plastic Washers for Neck Mic – If you use a Sinclair Neck-wall Micrometer Gauge with integral stand, you can use thin plastic washers to adjust the height of the case on the mandrel. This makes it much easier to measure the same point on the case neck every time. Thanks to MikeCR for this tip (and photo).
Want to see the details?CLICK HERE to view full-screen photo.
Check out those five targets. The Aggregate (average) of all five targets is a tiny 0.0840 inches! These were shot by Gary Ocock at 100 yards in a California benchrest match on August 6, 2017. Though Gary’s 0.0840 Agg beats existing records, this was not a “sanctioned” match, so Gary’s killer Agg was NOT submitted for IBS or NBRSA records. So, sadly, the Agg won’t appear in the record books, but this remains a spectacular, verified feat of rifle accuracy, accomplished in competition.
Gary’s red railgun is arguably the Most Accurate Gun Ever Built. As far as we can determine, no one has ever shot a smaller 5-target Agg anywhere, at any time. FYI, the NBRSA Unlimited Class 5×5 Aggregate World Record is 0.1242″ shot by Jerry Lahr in 2012. Gary’s 0.0840″ Agg is much smaller.
The Unlimited Benchrest Record That Will Never Be (Official)
Report by Boyd Allen
Gary Ocock’s stunning unlimited Aggregate is beyond amazing. That’s an average of five, 5-shot groups of .0840. Shot under sanctioned match rules, but at an unsanctioned 100-yard fun match, this Aggregate is well under the current 100-yard official records of the IBS (.1386), and the NBRSA (.1242). The fourth of the five groups measured a minuscule .018, less than half the size of the existing NBRSA Unlimited record of .049 (also shot by Gary). Check it out:
When the top 15 shooters all post teen Aggs, conditions must be pretty favorable. However there were some light switchy winds — Gary said that he shot better in the left to right condition.
GUN SPECIFICATIONS
Ocock’s red Jay Young Unlimited Railgun features one major difference from Young’s typical Railgun designs. The bottom of the barrel block is integral with the top (moving part), of the gun. The barrel is Ocock’s usual 1:13.5″-twist Krieger chambered for the 6 PPC. The BAT Neuvo action* is unusual in that its lugs are horizontal at lock-up instead of the usual vertical. With horizontal lugs, both lugs maintain contact with their abutments when the action is cocked. In the more normal configuration when cocked the top lug is forced off of its seat by a combination of the angle of the trigger cocking piece interface, the pressure of the striker spring, and bolt clearance at the rear of the action.
LOAD SPECIFICATIONS
Gary shot this remarkable Agg with well-used brass, Vihtavuori N133 powder, and self-made 66gr BT bullets** seated at “jam”. This amazing Agg was shot on the second day of a 2-day Unlimited Benchrest match. On Day 1 Gary had experimented with various loads using both surplus IMR 8208 and Vihtavuori N133, but was not satisfied with the results. For his first group on Day 2, Gary tried a light load of N133. After seeing the result, however, he decided to go to the other extreme — a super stout N133 load — with the same powder. As you can see, Gary’s willingness to experiment paid off.
Notably, Gary used light neck tension. Ocock found that for these bullets and this barrel, light neck tension worked best (contrary to “normal” N133 benchrest practice). Ocock used a bushing that only produces .001″ difference between the diameters of sized and loaded case necks.
This video shows a line-up of Rail-Guns. One of Gary Ocock’s Rails appears at the 0:35 time-mark.
Comment on Ocock’s Achievement
Congratulations to Gary Ocock for superb shooting (and smart loading). Even though the match was not sanctioned (so the Agg will never be a record), Ocock has raised the bar very high, and given us a new standard of ultimate accuracy.
Though this 0.0840 Aggregate and 0.018 group will never go into the record group, they are still noteworthy. There’s virtually no doubt that they would have survived inspection by any record committee. Except for the lack of fixed backers, an IBS requirement (for detecting cross-fires), all other conditions were met for an officially-sanctioned match.
Ocock Did Set Single-Group IBS World Record with Red Railgun
Photo credit: Ben Zentner
Here is Gary with his Red Railgun at a Visalia event in October 2017. Ocock let the event’s youngest competitor, 12-year-old Gavin Lichtenwalter, shoot Gary’s new Railgun for the last three matches on Sunday afternoon. The day before, 10/21/17, Gary shot an IBS Heavy Benchrest World Record putting five shots in just 0.045 inches, as certified by the IBS record committee. Here is that group, as first measured at the range at 0.039 inches. Gary also holds the Unlimited 5-Shot NBRSA 100-Yard Record with an 0.049 inch single group shot on 10/17/2009.
*The new BAT Neuvo actions are the result of a collaboration between Dwight Scott, and Bruce Thom, featuring Dwight’s ideas and BAT’s proven manufacturing expertise.
** Ocock shot his own, boat-tail match bullets, made with George Ulrich-crafted dies using Hood cores. Although he said that it had been a while since he had weighed any, his best guess was that they weigh something around 66.5 grains.
This is Jay’s second SWN Long Range Championship — the talented F-Open shooter also won in 2020 (SEE Jay 2020 Report). Jay was on a roll through the competition, not dropping a point until the last day and finishing with 1248-79X, just two points from a 1250 “clean”. F-Open runner-up Tim Vaught finished just one point back at 1247-83X, and Tim had the highest X-count among all F-Open LR competitors.
You don’t necessarily need the newest or most expensive equipment to succeed in Long Range competition. Jay Christopherson won the F-Open division using an older MINI STANDARD rest with a standard front bag. See the unit at right. Jay says it works great, and is easier to transport that some of the very large heavy, benchrest-style front rests. Jay has now won the SWN match twice with this rest, finished second in 2017, and third in 2018.
• Magnifying Glass – We use a flat, 2″x2″ pocket 4x-8x magnifier. This folds up on itself. Very handy, we use it to inspect bullets and brass. Use this to check your flash holes for burrs, and check the meplats of your bullets before loading.
• Ballistol Aerosol – Try using this versatile lubricant/solvent for full-length sizing. Spray some on a patch and you can wipe the carbon off your case necks. Then, continue to apply a very small amount of Ballistol on the case bodies — just thin sheen is all you need. Ballistol is super slippery, and easy to remove. For general full-length sizing (on small cases) it works great and doesn’t leave a gooey, waxy, or chalky residue. For heavier case-forming jobs, we recommend Imperial Die Wax.
Check out those five targets. The Aggregate (average) of all five targets is a tiny 0.0840 inches! These were shot by Gary Ocock at 100 yards in a California benchrest match on August 6, 2017. Though Gary’s 0.0840 Agg beats existing records, this was not a “sanctioned” match, so Gary’s killer Agg was NOT submitted for IBS or NBRSA records. So, sadly, the Agg won’t appear in the record books, but this remains a spectacular, verified feat of rifle accuracy, accomplished in competition.
