Tech Tip by Doc Beech, Applied Ballistics Support Team
I am going to hit on some key points when it comes to bullet pointing. How much pointing and trimming needed is going to depend on the bullet itself. Specifically how bad the bullets are to begin with. Starting out with better-quality projectiles such as Bergers is going to mean two things. First that you don’t need to do as much correction to the meplat, but also that the improvement is going to be less. NOTE: We recommend you DO NOT POINT hunting bullets. Pointing can affect terminal performance in a bad way.
NOTE the change in the bullet tip shape and hollowpoint size after pointing:
Don’t Over-Point Your Bullets
What is important here is that you never want to over-point. It is far better to be safe, and under-point, rather than over-point and crush the tips even the slightest bit. To quote Bryan Litz exactly: “Best practice is to leave a tiny air gap in the tip so you’re sure not to compress the metal together which will result in crushing. Most of the gain in pointing is taking the bullet tip down to this point. Going a little further doesn’t show on target”. So in essence you are only bringing the tip down a small amount… and you want to make sure you leave an air gap at the tip.
Also keep in mind, bullet pointing is one of those procedures with variable returns. If you only shoot at 100-200 yards, bullet pointing will likely not benefit you. To see the benefits, which can run from 2 to 10% (possibly more with poorly designed bullets), you need be shooting at long range. Bryan says: “Typically, with pointing, you’ll see 3-4% increase in BC on average. If the nose is long and pointy (VLD shape) with a large meplat, that’s where pointing has the biggest effect; up to 8% or 10%. If the meplat is tight on a short tangent nose, the increase can be as small as 1 or 2%.” For example, If you point a Berger .308-caliber 185gr Juggernaut expect to only get a 2% increase in BC.
Should You Trim after Pointing?
Sometimes you can see tiny imperfections after pointing, but to say you “need” to trim after pointing is to say that the small imperfections make a difference. Bryan Litz advises: “If your goal is to make bullets that fly uniformly at the highest levels, it may not be necessary to trim them.” In fact Bryan states: “I’ve never trimmed a bullet tip, before or after pointing”. So in the end it is up to you to decide.
Pointing is Easy with the Right Tools
The process of pointing in itself is very simple. It takes about as much effort to point bullets as it does to seat bullets. We are simply making the air gap on the tip of the bullet ever-so smaller. Don’t rush the job — go slow. Use smooth and steady pressure on the press when pointing bullets. You don’t want to trap air in the die and damage the bullet tip. You can use most any press, with a caliber-specific sleeve and correct die insert. The Whidden pointing die has a micrometer top so making adjustments is very easy.
Bryan Litz actually helped design the Whidden Bullet Pointing Die System available from Whidden Gunsworks. When ordering, make sure that you pick up the correct caliber sleeve(s) and appropriate insert(s). The Whidden Bullet Pointing Die System comes with the die, one tipping insert, and one caliber-specific sleeve. To see which insert(s) you need for your bullet type(s), click this link:
Saturday, September 23, 2023, is National Hunting and Fishing Day.
There are over 9.2 million hunters in the United States. The fees paid by hunters are essential to support conservation efforts and to protect/maintain habitats.
These infographics explain the vital role that American hunters play in protecting wild species in North America. Currently 60% of state Fish & Wildlife Agency funding comes from excise taxes and licensee fees paid by hunters and anglers. The system has provided billions of dollars for conservation over the past nine decades. Since the late 1930s, hunters, target shooters and the firearms industry have been the nation’s largest contributors to conservation, paying for programs that benefit America’s wildlife.
The Pittman-Robertson Act generates $700 million annually, which is distributed by the U.S. Fish and Wildlife Service to state fish and game agencies across America.
Image from Fox News. Click HERE for full story with video.
The Second Amendment Foundation has filed a federal lawsuit against New Mexico Gov. Michelle Lujan Grisham and four other officials on the grounds that the governor’s “emergency order’ prohibiting open and concealed carry in Albuquerque and surrounding Bernalillo violates the Second and Fourteenth Amendments of the U.S. Constitution.
Joining SAF are the New Mexico Shooting Sports Association, Firearms Policy Coalition and a private citizen, Zachary Fort, who resides in Bernalillo County. They are represented by Jordon George of Aragon Moss George Jenkins, LLP who has also filed a motion for a temporary restraining order and preliminary injunction. The lawsuit and motion were filed in U.S. District Court for the District of New Mexico.
Along with Gov. Lujan Grisham, defendants include: Patrick Allen, Cabinet Secretary for the New Mexico Department of Health; Jason Bowie, Cabinet Secretary for New Mexico Department of Public Safety, and W. Troy Weisler, chief of the New Mexico State Police. They are sued individually AND in their official capacities.
“Despite her claims to the contrary,” said SAF founder and Exec. V.P. Alan M. Gottlieb, “Gov. Grisham does not have the authority to ‘suspend’ the Second Amendment for an alleged public health emergency or any other reason. Neither do any of the other defendants, nor can they legally enforce such a suspension.”
“Evidently”, added SAF Executive Director Adam Kraut, “Gov. Lujan Grisham believes she can disregard the constitution to further her own political views. We’re taking action to stop this unconstitutional exercise of power in its tracks, because it is a flagrant violation of the right of individual citizens to carry firearms in public for personal defense.”
“Our motion for a temporary restraining order and preliminary injunction will prevent the state from further causing injury to the plaintiffs and other citizens under this unlawful order,” Kraut added.
Over 22 million Americans are currently licensed/permitted to carry concealed weapons.* And with the important U.S. Supreme Court decision in NYSRPA v. Bruen, we can expect that number to increase significantly. That landmark case stated that the Second Amendment guarantees citizens the right to bear arms outside their homes.
There are now seven (7) major business entities which provide insurance coverage and legal services for CCW holders. These providers are listed below. We suggest, BEFORE you commit to any particular policy/membership, you comparison shop at least three different options. We also recommend you read the full 3400-word GunDigest Article that examines, in detail, the coverage offered by these seven companies:
Factors to Consider When Choosing a Gun Insurance Program:
Attorney Fees and Expert Fees
The key benefit of any CCW insurance plan is coverage for attorneys fees. If you need a lawyer for a civil case or criminal defense, the fees pile up very fast. Good lawyers can charge $400-$500 per hour, and a trial can go on for many days. GunDigest explains: “If your case goes to trial you might find a bill that runs up to six figures.” You should check to see if a policy covers lawyer retainer, hourly fees, expert fees, AND potential damages.
Bail Bond Coverage
If you are involved in an incident, and an arrest is made, you want to avoid spending time in a jail cell. That’s why it’s important to have a CCW insurance plan that will quickly provide funding for bail bonds. As GunDigest notes: “bail-bond coverage is typically part of a sound concealed carry insurance policy”.
Multi-State Coverage
Gun laws vary among states, and state insurance laws vary as well. This affects the coverage an insurance program can and will provide. When choosing a policy, ask questions to determine how coverage may vary from state to state. With some programs you can purchase additional coverage for trips outside your home state. These can be time-limited for cost savings.
Policy Limits (Dollar Amounts)
When considering a CCW insurance program you need to look at the policy limits — the amount the program might pay to provide legal assistance and potentially settle a claim. You need to read the fine print here, just as you would with an automobile or home policy.
The detailed GunDigest article on CCW Insurance Coverage, notes that there are some additional factors to consider when choosing CCW Insurance:
“You’ll find there are other areas covered by some concealed carry insurance plans worth contemplating. Many of them fall within the policies themselves, however, some cost extra. In many cases, CCW policies go well beyond legal expenses and cover some other aspects you might not have considered:”
Crime Scene Clean Up
Negligent Discharge
Spouse And Family Self-Defense
Property Damage
Firearms Replacement
Work Loss Coverage
Personal Use Of Firearm (non-defensive)
* According to a 2022 report by attorney John Lott, of the Crime Prevention Research Center, the number of concealed handgun permits now stands at 22.01 million – a 2.3% increase since 2021.
Would you like gun and outdoor industry companies to learn what products you favor, or what types of hunting you prefer? Then you may want to take a FREE SURVEY.
Your responses help the hunting, recreational shooting, and defensive firearms markets develop new products and improve services. The results are shared with conservation and advocacy groups, allowing them to advance conservation and pro-second amendment issues. To participate, go to ShooterSurvey.com or HunterSurvey.com. NOTE: An email address is required.
Here are some interesting results from recent surveys:
NOTE: Results exceed 100% because many shooters use multiple firearms and/or bow types.
NOTE: Results exceed 100% because many hunters pursue multiple species.
If you take the survey, you get a chance to win a $100 gift card. Each quarter, respondents are entered into a drawing for one of five $100 gift cards to the outdoor retailer of their choice.
About Shooter Survey and Hunter Survey
Southwick Associates launched the HunterSurvey and ShooterSurvey in 2006 to help state Fish & Wildlife Agencies, conservation organizations, and the outdoor equipment industry understand what hunters, recreational target shooters, and personal protectors want and need. Survey results reflect the attitudes and habits of hunters and recreational shooters across the United States and are analyzed to develop new products, provide better services, and make smarter decisions that help improve public hunting, recreational shooting, and protection opportunities.
All survey responses are kept strictly confidential. Only summaries of the responses are used in reporting. However, to take the survey you must provide an email address to Southwick Associates. We recommend you NOT sign up with a primary business or personal email.
This article copyright 2023 AccurateShooter.com. No reproduction is allowed.
The Magnetospeed V3 chronograph is affordable, easy to transport, and easy to set up. With a MagnetoSpeed barrel-mounted chrono you can quickly and easily record muzzle velocity (MV) without having to set up tripods or walk down-range. The compact MagnetoSpeed chronos are easy to operate and transport. With the full-featured V3 model, everything you need comes in a small fitted case. In the top photo are the components used with the MagnetoSpeed V3 Kit:
1. V3 Bayonet sensor
2. Display and control unit
3. Bayonet spacers (plastic and rubber)
4. Cords and mounting hardware (left), suppressor heat shield (right)
5. Alignment rod (square cross-section)
6. Rail adapter (sold separately)
Our friend Gavin Gear of UltimateReloader.com reviewed the MagnetoSpeed V3 and came away impressed. Gavin explains that a good chrono is essential: “If you want to load and shoot precision ammunition, you need the tools that will produce and validate the precision of your loads. A good chronograph is one of those tools! In this post I’m going to introduce you to the MagnetoSpeed V3 chonograph, the high-end electromagnetic chronograph which fills out the top slot in MagnetoSpeed’s equipment portfolio.”
In this 11-minute video Gavin reviews MagnetoSpeed’s top-of-the-line V3 Chronograph. He shows what ships with the unit, how to set it up for both rifles and pistols, and then he puts it through its paces showing how it captures velocity data. Gavin says he will follow-up with future videos showing how to link the MagnetoSpeed V3 to your mobile phone and how to log velocity data for future reference. To learn more about this high-tech chrono, visit UltimateReloader.com.
Given its compact size, reasonable price, and easy of set-up, we believe all serious shooters should have a MagnetoSpeed in their gear collection even if their primary chronograph is a LabRadar. The MagnetoSpeed V3 complete system is available now for $399.99 from Shop.GoHunt.com (MSRP is $449.00).
September 23, 2023 is National Hunting & Fishing Day. The annual celebration takes place on the the fourth Saturday of September every year. National, regional, state and local organizations will run thousands of “open house” hunting- and fishing-related events around the country. Events will include Fishing Derbys, Hunting Expos, Wing-shooting tournaments, and much more.
Hunting Safety Checklist
A good hunt begins with preparation. And during the hunt, safety is a key priority. To help hunters, the National Shooting Sports Foundation (NSSF) has created a Safety Checklist for hunters. This Hunting Safety Checklist, produced as part of the NSSF’s “Hunt S.A.F.E.” campaign, helps hunters follow good, safe practices in the field and at home.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. MidwayUSA — Savage Axis XP with Weaver Scope, $429.99
⏺ Hunting season is here — great hunting rifle value
Here’s a great deal on a rugged, camo-stocked Savage XP rifle complete with 3-9x40mm Weaver optic. Right now the Axis XP in 6.5 Creedmoor is just $429.99 on SALE with camo stock. Four other popular chamberings — .223 Rem, .22-250 Rem, .308 Win, .30-06 Springfield — are $449.99. This is a heck of a hunting rifle for under $450.00. Other chamberings, priced a bit higher, include .243 Win, .25-06, .270 Win, and 7mm-08. The Savage Axis XP is also available with a plain black stock, usually for significantly less money. For example the black .308 Win Axis XP is just $389.99, while the camo version is $449.99.
2. EuroOptic — Leica Laser Rangefinder Sale
⏺ Major savings on top-quality laser rangefinders
With their outstanding range and precision, Leica laser rangefinders are some of the best you can buy. Leica LRFs are prized by hunters and competitors everywhere. We found the Leica CRF series of rangefinders on sale at EuroOptic. With this September sale, this is a great opportunity to save $100-$200 on a top-tier LRF. Some of these Leica units also have software connectivity. At $699.99 ($100 off), the Leica Rangemaster CRF 2800.com is a great deal right now.
3. Midsouth — Labradar Finally Back in Stock, $624.99
⏺ Superior advanced radar chronograph used by champions, now in stock
Labradar chronographs are used by top benchrest, F-Class, and ELR competitors. Labradars provide precise bullet speed measurements, with no need to go downrange, or attach a large barrel fixture that could affect POI or accuracy. For many months Labradars have been hard to get. Thankfully, Midsouth has just received some of the latest-generation Labradars. Get one now at $624.99 at Midsouth before they sell out.
4. Frankford Arsenal — Universal Seating Die, $59.15
⏺ Great user reviews for this versatile die with 9 caliber sleeves
Are you tired of buying multiple seating dies for all your cartridges? Then check out the Frankford Arsenal Universal Seating die. It works with .224 to .338 caliber bullets. This kit includes 9 bullet alignment sleeves, 3 VLD bullet seating stems, and a molded storage case.
5. Amazon — RCBS Brass Boss, $199.99
⏺ This reliable unit does multiple tasks very well — $174.99 with Rebate
Speed up your case prep with the RCBS Brass Boss. This versatile device features six variable-speed, rotating stations that can fully prepare brass for reloading (after the brass is trimmed to length). The Brass Boss includes tools for all six stations: an inside VLD chamfering tool, outside deburring tool, primer pocket cleaner (small/large), military crimp remover (small/large), primer pocket uniformer (small/large), case neck brushes (four diameters) and a tub of dry case neck lubricant. NOTE: The Brass Boss qualifies for a $25.00 RCBS Rebate through 9/20/2023, so your net cost is $174.99.
6. Bullet Central — SK Rimfire Ammunition In Stock
⏺ Major savings on very good rimfire ammo by Lapua sister company
SK rimfire ammunition offers great performance for the price. SK .22 LR ammo shot very accurately in our test rifles. Now at Bullet Central you’ll find ample SK rimfire ammo in stock including Rifle, Pistol, Standard and more. NOTE: Bullet Central has no quantity limits, so you can buy as much as you want. This is a good choice for NRL22 competition.
7. Creedmoor Sports — Know Your Limits Target Plate, $89.95
⏺ Clever training plate — great for rimfire NRL22 and PRS
This Creedmoor Sports Inverted Know Your Limits (KYL) Target offers a unique shooting experience. The goal is to put your shots INSIDE each hole in the steel plate. Made from laser-cut 3/8″ AR500 steel plate, this target handles both rimfire and centerfire cartridges. The target, which can be set up horizontally or vertically, has 7 circles which range from 2.0″ to 0.5″ in diameter. Start with the biggest hole and then work your way down. It’s fun and challenging. Failure to go through the circle or an edge shot can be easily identified visually and by the “ping” this target makes.
8. Amazon — Caldwell Stinger Rest, $86.10
⏺ Good, stable rest for sighting-in hunting rifles
Hunting season is here. The Caldwell Stinger Shooting Rest is an affordable one-piece rest that’s great for sighting-in hunting rifles. The heavy-duty metal frame provides good, solid support. Elevation is easily adjustable, and twin handy, cam-locks allow the Stinger’s front support to slide forward or backwards to match your rifle’s fore-arm dimensions.
⏺ Excellent, versatile tool kit for multiple gun maintenance tasks
Having the right tools to work on your firearms is critical to prevent damage and ensure they’re safe to operate. A great kit to get started with is the Lyman 45-piece Lyman tool kit. This the key tools needed to perform a host of gunsmithing tasks. With this Lyman tool kit, you get a nice fitted cases which contains ALL the following: standard type screwdriver handle, ratcheting handle, 34 individual cross tip, flat tip, and Allen bits, an extension, a #1 and #2 cross tip long bit, three pin punches, a Glock front sight bit, and a Weaver scope ring bit.
10. Palmetto SA — Walker’s Muffs + Safety Glasses, $15.99
⏺ Killer deal on hearing and eye protection combo
Is it time to replace your hearing and eye protection? Or perhaps you could use an extra set for friends? Check out this Walker’s Ultra Slim Muff & Glasses Combo. You get good quality 27dB NRR (Noise Reduction Rating) muffs AND a set of ANSI Z87.1-rated shooting glasses — all for just $15.99. That’s a great price for essential safety items. Shooters should always have both eye and ear protection whenever at the range.
What would you do if you had a LIVE Round stuck in a chamber? Well, don’t hammer a wood dowel in the barrel, that’s for sure. Here is a tale of stupidity that could have injured the rifle owner. This account appeared on the Facebook Page of Brock & Norris Custom Rifles, a gunsmith shop in the United Kingdom.
Live, Loaded Round Stuck in Chamber — What NOT to Do!
Commentary by gunsmith Mike Norris
Here is a cautionary tale. A client came into the workshop with a problem which could have had very serious [even deadly] consequences. And it is not the first time we have seen this. Firing neck-sized-only ammunition, the client attempted to load a round which then jammed solid in the chamber. The bolt would not close and the round was unable to be extracted.
The problem was compounded by various attempts to push the loaded round from the chamber with cleaning rods and the assistance of a hammer (I kid you not!). All of which damaged the bore and the crown, culminating in a wooden dowel being hammered into the barrel which subsequently broke off in the bore. The end result was a barrel that was totally wrecked.
One Facebook friend posted: “Fortunate avoidance of a ‘Darwin Award’. I can hear it: ‘Go on hammer the bolt, she’ll go!’. We’re missing a ‘face palm’ emoji here.”
The Problem Started with a Neck-Sized Case
The moral of this story is DO NOT NECK SIZE cases. Mike advises: “Full-length size cases correctly. You only move the shoulder back 1 to 1.5 thousandths and the case will feed and extract EVERY TIME. Yes you will have to trim cases occasionally but it is one hell of a site cheaper and safer than jamming a live round in the barrel and wrecking the barrel trying to remove it. Not to mention the risk to life and limb!”
What Should Have Been Done in this Situation?
Mike was asked the best method for removing a stuck round. He stated: “The Grease Gun Method on a threaded barrel works*. However, in this case, this was not remotely possible due to 20 inches of wooden dowel being broken off in the bore as well. The live round (yes it was live!) was attempted to be removed by hammering on a brass cleaning rod (an actual hammer was used) to try to dislodge it. That brass rod broke, so then a wooden dowel was employed, and THAT broke as well.”
Mike cautions that, when a live, loaded round is involved you must be very careful: “Do not be taking chances with your own safety or others around you. When it is safe to do so, get the rifle to a professional. By the way he WILL [chide you] for being daft in the first place and then bringing the problem into his premises. Expect to be charged for the expertise to remove said obstruction, In the past I even had a client send me a loading die with a live .338 Lapua round in it through the Post no less!”
* This YouTube Video shows the successful removal of a jammed FIRED (not live) case from an AR15 barrel. You can see the fired case eject at 15:35 time-mark, after the primer pops out first. But note, this was NOT a live, loaded round. Extreme caution must be excercised with live rounds.
Hunting season is here. It’s time to sight-in those deer rifles, check the optics, and make sure you’re ready to go. We know some hunters might enjoy shooting game profile targets when at the range for the sight-in process. To that end, here are six animal profile targets from Gun.Deals. Right-click any target to download the printable PDF file, designed to print to standard 8.5″ x 11″ paper. All these targets include entry boxes for Shooter Name, Score, Range (distance), and Date.
Deer Targets with Center Hit Zones Gun.Deals offers two different deer targets, both free to download. We prefer the standing buck with target ring in center mass (left below). Hit the red “10” for maximum points. You can also use this target for rimfire fun practice. NOTE: On the first target, the bullseye is centered in the graphic. This is NOT the optimal hit location for most game animals, which varies by species. Use these targets for general practice, but in the field, aim for the critical hit zone.
Bear Targets with Center Bulls
Few of us have actually encountered large bears in the wild. But if you do… it can be scary. Work on your bear recognition skills with these two targets, a standing bear, and a bear horizontal profile.
Sight-In Target and Bullseye Target
Courtesy of Gun.Deals, we’ve also included a conventional bullseye and a sight-in target. You can augment that sight-in sheet with neon orange Birchwood-Casey Target Spots if you want multiple aim points. A target pack with 160 1.5″ Target Dots is just $4.49 at Amazon.
Would you like gun and outdoor industry companies to learn what products you favor, or what types of hunting you prefer? Then you may want to take a 
September 23, 2023 is 
