In the wintertime, it’s common to encounter problems with static electricity when throwing your powder charges. The static can cause powder kernels to cling to the surface of reloading components, and can cause powder clumping. Clumped or sticky powder may make your measure bind or grab in the middle of the cycle, which can throw off your charge weight. Here are a couple simple ways you can minimize the effects of static electricity and improve the consistency of your powder measuring.
Ground Your Powder Measure — If you’re throwing powder charges in the fall or winter and have problems with bridging or sticking powder, use a ground wire. Bullet-smith Victor Johnson (Johnson Precision Bullets) tells us: “I have a 25-foot piece of real small wire with alligator clips on each end. It’s that long so I can run it down the hall to a water pipe. Use the wire tie from a bread bag to hold it in a small roll to put in the range box. When using it at the range use a 6″ nail from the co-op or Lowe’s / Home Depot and just push it into the ground.”
Use Bounce Dryer Sheets — A quick pass with the thin sheets used in dryers will eliminate “static cling” on your plastic reloading parts like powder throwers, powder funnels, and reloading press guides. Thanks to Doc76251 for this tip.
Reduce Electronic Scales’ Drift with Anti-Static Spray
Very sadly, GS Arizona, the creator of the Rifleman’s Journal website, passed away unexpectedly in June of 2022. Here is one of the many great tips he provided to handloaders through that website.
Apparently reducing static charges on and around electronic scales can reduce their propensity to drift, lessening the problem of “wandering zero”. Just how and why static charges interfere with scale performance is unclear, but many shooters have noticed that static electricity can cause electronic scales to behave strangely. So how do you reduce static charges around your digital balance? GS Arizona has found a very simple solution — an anti-static aerosol spray — that, by all indications, actually works. When this “spray-can solution” was suggested by a fellow shooter, GS was skeptical. However, he tried the stuff and he says that it really does help the scale maintain zero over time, with much less observed drift.
GS explains that the use of “Static Guard” spray helped mitigate the problem of a drifting zero on his Ohaus electronic scale: “My electronic scale… suffers from drifting zero (as they all seem to). I’ve read dozens of forum posts about drift and how to minimize its occurrence, so I know this problem isn’t limited to my scale or my workshop. Sometime last year, John Lowther mentioned the use of anti-static spray as a solution to the drift problem. John stated that the spray had virtually eliminated drift for him.”
GS found that the Static Guard actually worked: “The spray works great, just as John said it would. I spray all surfaces that I touch with my hands and arms as well as the pan (top and bottom), the metal tray on which the pan rests and the table under the scale. In six months or so of using the spray I’ve re-applied it about two or three times; it certainly isn’t something that you need to do each time you sit down to load. Before using the spray, it was not uncommon for me to re-zero the scale 10 times in the course of loading 72 rounds; now it might need it once during a session.”
Click Map to launch interactive webpage with info for all 50 states.
Going hunting soon? Need to find out about hunting licenses, deer tags, local regulations, and the best hunting areas? Then visit WheretoHunt.org. This website has an interactive map of the country. Simply click on a state to find the info you need.
For all 50 states, the NSSF provides information about hunting licenses and permits, where to hunt, hunter education classes, laws and regulations and more. For each state you’ll also find a link for required applications and license forms. Have a safe and productive hunt this year.
NRA publication Shooting Sports USA (SSUSA) has thousands of articles online, all free for the reading. Many of these stories have been written by top competitors, including National and Olympic Champions. You will find SSUSA articles spotlighted every week on the NRA Competitive Shooting Facebook page. We recommend you bookmark that page as a valuable resource. Here are four notable SSUSA articles that have been featured on Facebook this month. Go to SSUSA.org to see even more current articles, with new content every day.
Here is an insightful, fairly lengthy 1850-word article about the phenomenon we call mirage. The article explains how and why mirage appears, how it can best be monitored, and how mirage can indicate both wind velocity and direction. Top competitors follow the adage “Mirage is your friend”, because mirage can often be the most important indicator of wind variables — sometimes even more important than wind flags. “The mirage is more sensitive than the flags since it has less inertia and momentum”, wrote Desmond T. Burke, in his book, Canadian Bisley Shooting, an Art and a Science.
Well worth reading, this SSUSA article talks about the properties of mirage. Here is a sample:
“Mirage — can make all the difference between a shot landing squarely in the X-ring or being victimized by an undetected downrange breeze. The true power of mirage is found in its ability to betray the subtlest of breezes downrange. Its fluid movement… can not only provide wind direction, but speed as well.
Typically, the ability to detect mirage is maximized on warm, sunny and sultry days. Expect mirage to be most pronounced in mid-morning or early afternoon, although it ignores these rules with regularity[.]
Mirage is extremely powerful at identifying winds of less than 12 mph, particularly those gentle breezes subtle enough to not even bother moving the flags.
When there is no wind, or a gentle head or tail wind, mirage will appear to be ‘bubbling’ directly up from the ground. Many call this ‘boiling’, and it is probably the easiest of all to detect.
As a general rule of thumb, when wind speed increases, overall height of the waves produced by the mirage is reduced. Large peaks and valleys in the waves mean that particular mirage is being driven by a very slight breeze. Conversely, crest size is reduced with wind speed, making it harder and harder to detect, until the mirage disappears entirely at somewhere around 12 miles per hour. In other words, the taller mirage’s waves appear, the slower the breeze.”
Authored by the late Glen Zediker, this article covers barrel break-in procedures. It is particularly useful for dealing with factory barrels. We CAUTION readers — with outstanding, hand-lapped custom barrels from top barrel-makers, you may want to do very little break-in — clean sparingly and keep barrel heat low. Do NOT use abrasives aggressively. On our Krieger and Brux barrels, we simply wet-patched every 2-3 rounds for 20 rounds and the barrels shot superbly from the start with minimal fouling. But for factory barrels, a moderate break-in process may prove beneficial.
Zediker explains: “Lesser, lower-cost barrels are going to have more pronounced … imperfections within the bore[.] These imperfections are largely tool marks resulting from the drilling and rifling processes. And if it’s a semi-automatic, like an AR-15, there might be a burr where the gas port was drilled. The goal of break-in is to knock down these imperfections, thereby smoothing the interior surface.”
As one who has experienced a cartridge case-head blow-out with a 9mm pistol, this Editor is very conscious of the risks involved and the damage a blow-out can do to the pistol, to the magazine, and (worst of all) to the shooter. Even with new brass, the possibility of a case failure is always present. And even if the case remains intact, we’ve seen primer failures that create a dangerous jet back towards the pistol shooter. That’s why shooters should always employ protective eyewear whenever they shoot.
We love our wheelguns, but there’s no doubt that forcing cone damage can occur, particularly with hot loads and if your cylinder-to-barrel gap is excessive. This article explains how to inspect your revolvers, and how to mitigate the likelihood of forcing cone damage. The article also explains how to clean your revolvers properly. This is very important to avoid build-up of lead and powder residues.
2025 CMP Top Four Winners of Recurring $5000 Grants
Since 2005, the CMP has annually offered one-year scholarships to current high school seniors based on academic merit, humanitarian efforts, extracurricular activities, and marksmanship participation. Continuing this tradition, this year the CMP presented four, $5,000 annual scholarships ($20,000 over four years) to this year’s top four applicants, as determined by members of the CMP Scholarship Committee.
Each of the four recurring $20,000 scholarships are named in honor of past CMP Board members Harry Sieben, Carolyn Hines, Jon Bengston and former Chair Judith Legerski.
This year’s Four Top Scholarship recipients are…
Elisa Boozer, Oklahoma City, OK (Judith Legerski Scholarship)
A former member of the Oklahoma Sharpshooters junior team, Elisa is a multi-time Oklahoma State Champion for both smallbore and air rifle and qualified for the Junior Olympics five times for air rifle and four times for smallbore. She also found international success, earning silver in the 10-meter women’s air rifle junior competition at the Leppa Grand Prix in Finland. Elisa went on to earn her Junior Distinguished Badge from the CMP in 2023 and is an honorary life member of the Oklahoma Rifle Association.
She credits marksmanship for teaching her focus, hard work and community. Academically, Elisa was a straight-A student, taking AP Honors and dual credit classes. She joined the University of Kentucky rifle team this fall. She is a business major.
Hanna Goin, Walla Walla, WA (Jon Bengston Scholarship)
Hanna is a former member of the Walla Walla High School JROTC program’s rifle team, where her competitive marksmanship career began. While there, she competed multiple times at the Army JROTC and CMP National Championships and at the Junior Olympics in 2025. She also took first overall at the Idaho State Junior Olympics in air and smallbore rifle and was part of the Washington State Champion Precision Air Rifle Team.
Hanna has said that marksmanship has taught her that there is nothing desirable about staying within a comfort zone, helping her to stay mentally strong through adversity. Academically, she took Honors, AP and dual enrollment courses during high school. Hanna joined the Morehead State rifle team this fall. She is a pre-med major.
Katlyn Sullivan, Statesboro, GA (Carolyn Hines Scholarship)
Among several accolades, including multiple medals at the state and national level, Katlyn was a Georgia High School Association (GHSA) Individual State Champion in 2024 and 2025 and was a member of the All-Star State Team from 2023-2025. She was also a four-time qualifier for the National Junior Olympics in air rifle and was a two-time qualifier for smallbore. In 2023, she earned her Junior Distinguished Badge.
Katlyn has said marksmanship has taught her leadership, a growth mindset and how to achieve her goals – changing how she handles setbacks. Academically, Katlyn finished second out of 392 other students, mastering multiple AP classes, and she earned a place in the National Honor Society. Katlyn joined the Nebraska Cornhuskers rifle team this fall. She is a mechanical engineering major.
Dominic DeBenedetto, Prairieville, LA (Harry Sieben Scholarship)
Domonic began marksmanship through his local 4-H program at just nine years old. He’s a six-time Nationals qualifier and placed fifth overall at the 4-H Nationals in air rifle (his team placing first in both air rifle and smallbore). He is also an accomplished rifle silhouette competitor who has competed in local, regional and national championships in the discipline, and he takes part in pistol/air pistol shooting.
He credits marksmanship for leading him to a role as an ambassador within his community – hoping to make a difference in the lives of other youth. Domonic finished in the top 3% of his 500-student class. He has enrolled at Louisiana Tech as an engineering major.
Other Scholarship Winners for Fall 2025
In addition to the 4-year recurring $5K scholarships, the CMP offers $1000, $3000, and $5000 one-time grants to qualified junior marksmen. These $1000, $3000, and $5000 scholarships can fund any accredited education, technical/trade school, or vocational program. Shown below are the eleven $5000 one-time scholarship winners for 2025. There were also 32 $3000 grant recipients, and 80 $1000 grant recipients.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Palmetto State Armory — CANIK 9mm Pistol Sale and REBATE
⏺️ » Good handguns with Factory Rebates up to $100
If you’re in the market for 9mm target or carry pistol check out the CANIK TP9SFx and MC9L pistols now on sale at Palmetto SA. The full-frame CANIK TP9SFx is great for gun games with a good trigger, long sight radius, and ability to mount red-dot (reflex) optics. The more compact CANIK Mete MC9L has adjustable backstraps, is also red-dot capable, and despite its compact size it boasts a 17+1 capacity. NOTE: CANIK is offering significant rebates (up to $100) on many handguns through 9/30/2025. To qualify for a rebate: 1. Purchase a qualifying CANIK pistol; 2. Scan the QR Code; 3. Complete the Online Rebate Form.
2. Amazon — RCBS Chargemaster Link, $299.99
⏺️ » Popular Electronic Scale/Dispenser with Bluetooth App
The RCBS Chargemaster Link is a top-grade electronic powder scale/dispenser. This unit is fast and accurate. It also connects with an RCBS reloading App via Bluetooth. Using the RCBS ChargeMaster Link is easy. You can use the keypad or run the RCBS App that allows you to customize powder dispensing settings. The ChargeMaster Link’s load cell and electronics are extremely accurate, providing precise measurements with all powder types for rifles and handguns.
3. Graf & Sons — Sierra Bullet Sale, Save 15%
⏺️ » Major savings on excellent match and hunting bullets
Sierra bullets are a top choice for hunting, target shooting, PRS/NRL competition, and self-defense. Right now a vast selection of Sierra bullets are on sale at Grafs.com. Save 15% on popular .22, 6mm, 6.5mm, .277, 7mm, and .308 Caliber rifle bullets, plus pistol projectiles, and get $12.95 flat rate shipping. For example the .224 40gr BlitzKing is just $28.04/100, the 6mm 107gr MatchKing is just $38.24/100, and the 6.5mm 120gr ProHunter is just $35.69/100. There are dozens of other Sierra bullet types on sale. NOTE: If Graf’s doesn’t have the Sierra bullets you want, Midsouth has 28 Sierra bullet types on sale right now. Midsouth deals include: .224 60gr MatchKing $21.99/100; 6mm 110gr MatchKing $99.99/250, .308 155gr TMK, $49.99/100.
4. Amazon — Lyman 8-station Turret Press, $279.99
⏺️ » 8-station turret press is great for loading multiple cartridge types
The 8-station Lyman Brass Smith All-American 8 Press (#ad) is an impressive product. This sturdy turret press is made from heavy-duty cast iron. The 8-die station turret will hold up to four 2-die sets. Below the turret is a rigid cast iron frame, housing a 1″-diameter ram and compound linkage. NOTE: With a $279.99 price on Amazon, the 8-station Lyman is $109 cheaper than the $389.05 7-station Redding T-7. No question, that’s a significant price advantage.
5. EuroOptic — TriggerTech Trigger Sale, 34-40% Off
⏺️ » Save up to 40% on popular triggers for bolt guns and ARs
Upgrading your trigger is an efficient way to improve performance. We like the TriggerTech line of triggers. Currently there are a number of very good TriggerTech triggers on sale at EuroOptic. You will find nice, adjustable triggers for Remington 700s and Rem 700 clone actions. In addition, TriggerTech offers a large selection of AR triggers suitable for both match and defensive applications. Save up to 40% with this sale.
6. Midway — Burris Fullfield Scope, $139.99
⏺️ » Good, light-weight hunting rifle scope at ultra-low price
Need a compact, lightweight, affordable optic for your hunting rifle? Check out this Burris Fullfield 2.5-10x42mm, now just $139.99 on sale ($60 OFF). Constructed from a single piece of durable aluminum, the Fullfield’s 2.5-10X magnification range is just about ideal for game hunters, and the scope’s mere 15-oz. weight reduces the burden of your rifle in the field. The knobs offer smooth elevation/windage adjustments, and the Wind MOA reticle is very good for hunting. This scope comes with the Burris “Forever” warranty.
7. Amazon — Hornady Rapid Safe, $112.24
⏺️ » Good fast-access handgun safe for home or shop
Prevent firearm accidents, theft, and misuse with the Hornady Rapid Safe Keypad Vault RFID (#ad) now $112.24 on sale. This rapid access safe can store handguns, ammo, and/or valuables. With the RFID technology, this safe can be opened in seconds. This Hornady Rapid Safe is made from 14-gauge steel and has a thick steel lid for added security. A pre-drilled housing allows you to bolt this safe to a secure structure. This safe has a back-up mechanical lock.
8. Amazon — Tactical Shooting Mat, $17.99
⏺️ » Very affordable waterproof nylon mat
All shooters need a good, durable shooting mat. A good, low-cost option is this Tactical Shooting Mat. Priced at just $17.99 on Amazon (#ad), this mat measures 78.4″ x 29.5″, long enough for even a tall shooter. The 900D Nylon fabric is waterproof with good tear resistance. This mat can do double-duty as a sleeping mat for camping. This mat also features 2 rows of MOLLE mil-spec webbing. Note, the Amazon header erroneously lists a 98″x29″ size. This mat is actually 78.4″ x 29.5″ inches.
9. MidwayUSA — Vortex Diamondback Gen 1 Binoculars, $129.99
⏺️ » Save $100 on good compact binoculars for hunters
Hunting season is almost here. Every hunter should have a decent set of binoculars to spot deer and elk. These 10-power Vortex Diamondback Binoculars are rubber-armored and 100% weatherproof with O-Ring seals. Get these for just $129.99, a 43% savings off the regular $229.99 price. These binocs come with Rainguard eyepiece cover, lens covers, comfort neck strap, and a deluxe carry case.
10. Amazon — Frankford Arsenal Powder Funnel Kit, $29.99
⏺️ » Handy smooth-flow funnels with 8 sizes
Charging cartridges has never been so easy. The Frankford Arsenal Aluminum Powder Funnel Kit (#ad) includes 8 interchangeable nozzles, eliminating the need for caliber-specific funnels. Each nozzle fits over the neck of your brass, providing a smooth surface for powder to flow while avoiding spills. Overall, this funnel kit makes accurate powder measurements a simple process.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Smith & Wesson Brands, Inc. (NASDAQ: SWBI) has opened a state-of-the-art training center in Tennessee. This new Smith & Wesson Academy replaces the former Smith & Wesson Academy and Shooting Sports Center which operated in Massachusetts between 1969 to 2017.
The newly established Academy will provide training in firearm proficiency, self-defense, and firearm safety. Situated on the 236-acre headquarters campus in Maryville, Tennessee, this state-of-the-art facility features pistol and carbine ranges, a multi-purpose flex range, a 300-yard rifle range, and a two-story immersive shoot house for simunition training.
The Academy also has classrooms, a fitness center, and offices that will house world-class training instructors. Starting this weekend, a registration portal will be available on the Smith & Wesson Academy website for a variety of training courses focused on pistol, carbine, and rifle platforms. These courses will range from introductory skills and safety to advanced techniques.
Outdoor Wire/Shooting Wire EIC Jim Shepherd attended the opening ceremonies at the new Smith & Wesson Academy. Jim noted: “One thing made obvious during the ceremonies was that Maryville, Tennessee definitely isn’t Springfield, Massachusetts. Having taken part in numerous media and training events in the former Shooting Sports Center in Springfield until its closure in 2017, the depth and breadth of the new facilities was testimony to the expansiveness of the Tennessee campus. This new facility not only includes enclosed ranges with acreage, but classrooms, a fitness center, and offices to house what the company says will be ‘world-class experts leading the training programs’.”
The Smith & Wesson Academy team will be led by renowned instructor Mark “Coch” Cochiolo. Mark is a retired U.S. Navy Chief Warrant Officer with over three decades of service in Naval Special Warfare. Mark completed four SEAL deployments to the Western Pacific and served eight years with the Navy’s premier counterterrorism unit. Following his retirement from active duty, Mark transitioned to instruction, training the next generations of Navy SEALs. As a contract instructor, he developed curriculum and trained more than 4,000 SEAL candidates in marksmanship and tactical weapons handling. Mark is recognized for his precision, discipline, and leadership in the special operations community.
Mark Cochiolo stated: “I have worked with a variety of firearm platforms, and I am grateful for the opportunity to leverage that experience in developing effective curriculum at the Academy, helping as many individuals become proficient with their firearms as possible. Smith & Wesson produces dependable, quality firearms – at the Academy, we’ll teach you how to use them”.
Sometimes you’ll get a barrel that doesn’t stabilize bullets the way you’d anticipate, based on the stated (or presumed) twist rate. A barrel might have 1:10″ stamped on the side but it is, in truth, a 1:10.5″ twist or even a 1:9.5″. Cut-rifled barrels, such as Kriegers and Bartleins, normally hold very true to the specified twist rate. With buttoned barrels, due to the nature of the rifling process, there’s a greater chance of a small variation in twist rate. And yes, factory barrels can be slightly out of spec as well.
After buying a new barrel, you should determine the true twist rate BEFORE you start load development. You don’t want to invest in a large supply of expensive bullets only to find that that won’t stabilize because your “8 twist” barrel is really a 1:8.5″. Sinclair International provides a simple procedure for determining the actual twist rate of your barrel.
Sinclair’s Simple Twist Rate Measurement Method
If are unsure of the twist rate of the barrel, you can measure it yourself in a couple of minutes. You need a good cleaning rod with a rotating handle and a jag with a fairly tight fitting patch. Utilize a rod guide if you are accessing the barrel through the breech or a muzzle guide if you are going to come in from the muzzle end. Make sure the rod rotates freely in the handle under load. Start the patch into the barrel for a few inches and then stop. Put a piece of tape at the back of the rod by the handle (like a flag) or mark the rod in some way. Measure how much of the rod is still protruding from the rod guide. You can either measure from the rod guide or muzzle guide back to the flag or to a spot on the handle. Next, continue to push the rod in until the mark or tape flag has made one complete revolution. Re-measure the amount of rod that is left sticking out of the barrel. Use the same reference marks as you did on the first measurement. Next, subtract this measurement from the first measurement. This number is the twist rate. For example, if the rod has 24 inches remaining at the start and 16 inches remain after making one revolution, you have 8 inches of travel, thus a 1:8″-twist barrel.
Determining Barrel Twist Rate Empirically
Twist rate is defined as the distance in inches of barrel that the rifling takes to make one complete revolution. An example would be a 1:10″ twist rate. A 1:10″ barrel has rifling that makes one complete revolution in 10 inches of barrel length. Rifle manufacturers usually publish twist rates for their standard rifle offerings and custom barrels are always ordered by caliber, contour, and twist rate. If you are having a custom barrel chambered you can ask the gunsmith to mark the barrel with the twist rate.
Wouldn’t it be cool if you could shoot .22 LR rimfire ammo from your regular hunting or tactical rifle? That would be ideal for low-cost training right? Well, this IS possible, provided you have a rifle that was designed with a .22 LR conversion in mind. One such firearm is the remarkable Sauer 202 from Germany. This impressive centerfire rifle is available with a factory-engineered .22 LR rimfire conversion. Read on to learn how Sauer’s cool .22 LR conversion works.
Sauer 202 Rifle: .308 Win/6.5×55 with .22 LR Conversion
Forum member “Tooms” sent us a report on his very special Sauer 202 with a .22 LR conversion kit. Sauer 202 rifles feature a “Quick-change barrel system”. The barrel is clamped into the receiver with crossbolts providing tension. This allows barrels to be swapped in a few minutes with simple tools. NOTE: This conversion kit was originally designed for the Sauer 200 STR, but because the Sauer 202 shares virtually the same design for the action/bolt/magazine, the system works for the 202 as well.
Tooms, from Denmark, explains: “The rifle began as a Sauer 202 Avantgarde Gold in .308 Win. I have added a 6.5×55 match barrel, plus a wide flat-bottom match fore-arm with rail for handstop and bipod. The .22 LR system [originally] cost $1000.00 [including] barrel, bolt, magazine well assembly, and magazine. The barrel is attached by three cross-bolts and the magazine well assembly is attached by one screw that fits into the barrel.”
Using this “Quick-change system”, Tooms can easily remove his centerfire barrel and swap in a .22 LR barrel. Then he places the factory conversion kit into the magazine well. This kit provides a rimfire bolt, a fitted sleeve for the rimfire bolt, and a magazine housing. This is a full Sauer factory-designed system so it works flawlessly. With the bolt closed, you can see the “new” .22 LR chamber in the front section of the loading port. On the silver section of the bolt you can see the rimfire extractor on the side.
The .22 LR Conversion Really Works
The Sauer 202 Varmint rifle shoots very well with the .22 LR conversion, as the 50m target at right shows. Though quite expensive, the conversion kit essentially transforms your centerfire rifle into fully functional, mag-fed precision rimfire rifle. That makes the Sauer 202 much more versatile as a hunting platform. It also allows you to cross-train with inexpensive ammo. You don’t have to purchase another scope, trigger, or stock. And you enjoy the exact same stock fit and ergonomics whether you’re shooting centerfire or rimfire. In some countries where gun ownership is severely restricted, it may be easier, from a legal standpoint, to purchase a .22 LR conversion kit than to obtain a permit for a second rifle.
Comments from Readers about .22 LR Conversions:
“I had a Sauer 200 STR with the .22 LR conversion and a .308 Win barrel kit. I can attest to the accuracy of both systems. The .22 LR would easily hold 1/2 MOA or better out to 100 yards. I now have the .22 LR conversion in my Sig SSG 3000 (same action as the Sauer 200TR and the Sauer 202 listed here). The action and trigger are as good as any I have ever used to include custom actions, AIAW, AIAT, TRG22. I never had 1 malfunction from the .22 LR over many thousands of rounds. They are truly top shelf systems!” — Jesse Bell
“Blaser made a .22 LR conversion kit for the R93 for a few years. It was available in 17 HMR, .22 LR, and .22 Magnum. My 17 HMR version has fired well over 17,000 rounds at prairie dogs and has scored kills in excess of 250 yards on many occasions. Possibly the best thing ever for practicing with your big game/match rifles.” — Captain Dave Funk
The Sauer 202 rifle line-up has been replaced by the Sauer 404 series which has much in common. To learn more about the complete line of Sauer rifles visit the J.P. Sauer USA website. You’ll also find more information on the primary J.P. Sauer & Sohn German website, www.Sauer.de. Though out of production, Sauer 202s can be found for sale on the used market.
Our take on Bore-Store Gun sleeves is simple: They work great, so buy them and use them — for ALL your valuable firearms.
Winter’s here, with rain and snow in much of the country. We known readers will have their guns in the safe for long periods. For winter storage, we recommend Bore-Stores. These thick, synthetic-fleece sacks cushion your guns, preventing nicks and scratches. The breathable fabric wicks away moisture, and the fibers are coating with corrosion inhibitors. I personally use Bore-Stores for in-safe storage with all my guns, and I have never had one of my guns rust inside a Bore-Store, even when I lived a stone’s throw from the ocean and its salty air.
Bore-Stores are offered in a range of sizes to fit everything from a snub-nosed revolver to a 33″-barrelled Black Powder Rifle. Bore-Stores can be purchased for $9.99 – $28.99 from Borestores.com. For most scoped rifles, we recommend the 10″x46″ SCR-1 case ($25.99). The Bore-Store manufacturer, Big Spring Enterprises will also craft custom sizes on request. For a long-barreled F-Class or ELR rig you may need a custom length. Or you can remove the scope and use the 7″x52″ SG-1 Shotgun Bore-Store for up to 32″ barrel ($28.99).
API-Brand Anti-Rust VCI Storage Bags — Affordable and Effective
Consider VCI Bags for Long-Term Storage
While we prefer Bore-Stores for regularly-used guns, if you have heirloom firearms that will be kept in storage for very long periods without seeing any use, you may want to grease them up and place them in the thin, but rugged API brand VCI Storage Bags. The interior VCI lining emits a safe corrosion inhibitor vapor. The multi-layer exterior locks out humidity and airborne contaminants. These bags are also resistant to petroleum-based chemicals and seal out moisture. They have a handy velcro opening.
Here’s one VITAL bit of advice for using sealed gun storage bags. Be absolutely sure, before you seal up the bags, that your guns are DRY and that all metal surfaces have been coated with an effective anti-corrosive, such as BoeShield T9 or Eezox. NOTE: If you can’t afford the $15 API sacks, Brownells offers a three-pack of 12″x 60″ anti-rust rifle sacks for $22.99 — under 8 bucks a gun. That’s certainly cheap insurance for rifles and shotguns that may cost many thousands of dollars.
Get Your Guns Out of Foam-lined Cases — They Are Rust Magnets
Just about the worst thing you can do for long-term storage (short of leaving your rifle outside in the rain) is to store firearms in tight, foam-padded cases. The foam in these cases actually collects and retains moisture from the air, acting as the perfect breeding ground for rust. Even in warm summer months, humid air can leave moisture in the foam.
Remember, those plastic-shelled cases with foam interiors are for transport, not for long-term storage. Don’t repeat the mistake of a wealthy gun collector I know. He stored four valuable Colt Single Action Army (SAA) revolvers in individual foam-padded cases, and locked these away in his gun safe. A year later, every one of his precious SAAs had rusted, some badly.
Product innovation is all about “building a better mousetrap”, or in this case, building a better bore-cleaning patch. A real smart guy, Shane Smith, has invented a triangular patch that earned a patent. The U.S. Patent Office has awarded a utility patent for BoreSmith’s triangular Pyramid Patch™. This unique cleaning patch was designed by Shane Smith, a mathematician/physicist who employed his scientific and firearms knowledge to create innovative bore-cleaning products.
BoreSmith’s clever Triangle Patch™ (aka Pyramid Patch) presents more cleaning surface area to the bore wall than does a conventional square or round patch (of equivalent size). At the same time, the unique geometry makes Triangle Patches much less likely to jam in the barrel. This is because the notches in the sides of the triangle allow the patch to sit more uniformly on the jag (without bunching up). In addition, the Pyramid patch is must less likely to jam due to pleating. One reason conventional patches get stuck is unwanted 5-layer pleating. The special notches in the Pyramid patch remove all or most 5-layer pleating. As a result the patch does not bunch up and this also reduces rod bowing.
Triangle Patch Function and Geometry Explained (See 1:18 time-mark):
NOTE: Despite what you may see in this video, you should ALWAYS insert brushes and patches from the chamber end first, using a fitted cleaning rod bore guide. With bolt-action rifles, NEVER insert a cleaning rod (with brush or jag) in through the muzzle. This may damage the delicate crown of your barrel.
Apparently reducing static charges on and around electronic scales can reduce their propensity to drift, lessening the problem of “wandering zero”. Just how and why static charges interfere with scale performance is unclear, but many shooters have noticed that static electricity can cause electronic scales to behave strangely. So how do you reduce static charges around your digital balance? GS Arizona has found a very simple solution — an anti-static aerosol spray — that, by all indications, actually works. When this “spray-can solution” was suggested by a fellow shooter, GS was skeptical. However, he tried the stuff and he says that it really does help the scale maintain zero over time, with much less observed drift.
Sometimes you’ll get a barrel that doesn’t stabilize bullets the way you’d anticipate, based on the stated (or presumed) twist rate. A barrel might have 1:10″ stamped on the side but it is, in truth, a 1:10.5″ twist or even a 1:9.5″. Cut-rifled barrels, such as Kriegers and Bartleins, normally hold very true to the specified twist rate. With buttoned barrels, due to the nature of the rifling process, there’s a greater chance of a small variation in twist rate. And yes, factory barrels can be slightly out of spec as well.
The .22 LR Conversion Really Works
Here’s one VITAL bit of advice for using sealed gun storage bags. Be absolutely sure, before you seal up the bags, that your guns are DRY and that all metal surfaces have been coated with an effective anti-corrosive, such as BoeShield T9 or Eezox. NOTE: If you can’t afford the $15 API sacks, Brownells offers a three-pack of 
Remember, those plastic-shelled cases with foam interiors are for transport, not for long-term storage. Don’t repeat the mistake of a wealthy gun collector I know. He stored four valuable Colt Single Action Army (SAA) revolvers in individual foam-padded cases, and locked these away in his gun safe. A year later, every one of his precious SAAs had rusted, some badly.
