The U.S. Army Marksmanship Unit (USAMU) has published a great series of reloading “how-to” articles on its Facebook Page. This post covers key factors to consider when loading ammunition for Match Rifles and Service Rifles, with a particular focus on self-loading “gas guns”. Visit the USAMU Facebook Page regularly for other, helpful reloading and marksmanship tips.
We offer some “cardinal rules” to help new gas-gun handloaders with safety and efficiency. These address both Match Rifle and Service Rifle versions of the AR15, M1 Garand, M1A, and M110. However, they can also improve safe reloading for many other auto-loaders such as M1 Carbines, FALs, SIGs, etc. The author distilled these principles many years ago to help focus on the essential aspects of these rifles.
RULE ONE: Service Rifles Are Not Benchrest Rifles
Gas-guns require a relatively loose fit between ammunition and chamber (vs. bolt actions) for safe, smooth operation. Many techniques, such as neck sizing and keeping cartridge headspace quite tight, are popular in the extreme bolt gun accuracy realm. However, they are of little value with Service Rifles, and some could even be hazardous. Before adopting a specialized technique, seriously consider whether it is appropriate and beneficial in a gas-gun.
RULE TWO: Never Compromise Safety to Obtain Accuracy
Example: If choosing a brand of great, but ultra-sensitive match primers offers possibly better accuracy at the risk of slam-fires in your design of rifle, don’t do it! You are issued exactly two eyes and ten fingers (best-case scenario). Risking them trying to squeeze 0.25 MOA better accuracy out of an M1A, etc. simply isn’t worth it.
RULE THREE: Tailor the Precision to Your Individual Skill and Your Rifle’s Potential
This has been addressed here before, but bears repeating for newcomers. If you are struggling to break out of the Marksman Class, or using a CMP M1 “As-Issued,” then laboriously turning the necks of your 600-yard brass is a waste of time. Your scores will improve much faster by practicing or dry-firing. On the other hand, if the reigning champions anxiously check your scores each time you fire an event, a little neck-turning might not be so far-fetched.
Verifying Load Improvements — Accuracy hand-loading involves a wide variety of techniques, ranging from basic to rather precise. Carefully select those which offer a good return on investment for your time and labor. In doubt? Do a classic pilot study. Prepare ammo for at least three or four ten-shot groups with your new technique, vs. the same with your standard ammo. Then, pick a calm day and test the ammo as carefully as possible at its full distance (e.g. 200, 300, or 600 yards) to verify a significant improvement. A little testing can save much labor!
This video explains the procedure for ordering an M1 Garand from the CMP.
RULE FOUR: Be Your Own Efficiency Expert
Serious Service Rifle shooters generally think of ammunition in terms of thousands of rounds, not “boxes”, or even “hundreds”. Analyze, and WRITE DOWN each step in your reloading process. Count the number of times each case is handled. Then, see if any operations can be dropped or changed without reducing safety or accuracy. Eliminating just two operations saves 2000 steps per 1000 rounds loaded. Conversely, carefully consider any measurable benefits before adding a step to your routine.
RULE FIVE: In Searching for Greater Accuracy with Efficiency, Look for System Changes
For example, instead of marking your 300-yard rounds individually to differentiate them from your 200-yard ammo, would a simple change in primers work? If accuracy is maintained, using brass-colored primers for 200 and silver for 300 provides an indelible indicator and eliminates a step! Similarly, rather than spending hours selecting GI surplus brass for weight and neck uniformity, consider splurging on some known, high-quality imported match brass for your 600-yard loads. Results should be excellent, time is saved, and given limited shooting at 600 yards, brass life should be long.
RULE SIX: Check All Your Primers Before Packaging Your Loaded Ammo
This seems simple and even intuitive. However, many slam-fires (which were much more common when M1s and M1As were the standard) are due, at least in part, to “high” primers. Primers should be seated below flush with the case head. The USAMU has addressed this at length in a previous column, but each round should be checked for properly-seated primers before they are packaged for use.
GetZone.com has released its annual “What’s Hot at SHOT” video series covering notable new products. There are now nearly 30 new product videos available on YouTube and the GetZone website. You’ll find three of these videos below, featuring the Christensen Arms MHR Rifle, Mossberg Patriot Rifle, and Hornady 7mm PRC cartridge. You’ll find more product videos on GetZone.com and the GetZone YouTube Channel.
Christensen Arms Modern Hunting Rifle
The Christensen Arms Modern Hunting Rifle (MHR) is a versatile, modular design built on an aluminum mini-chassis with V-block bedding. The maker claims that the “MHR provides the accuracy potential of a chassis rifle and the ergonomics of a hunting rifle all while offering exceptional modularity.” The MHR’s stock, forearm, and grips can be swapped out to create a variety of different configurations. You could have one forearm/grip for field carry and another for varmint shooting from a portable bench. This versatility doesn’t come cheap — the MHR starts at a very serious $3499.00 MSRP.
New Mossberg Patriot LR Tactical Rifle
Mossberg showcased a new rifle that should prove popular — the Patriot LR (Long Range) Tactical. This $1085.00 rifle has many excellent features: MDT chassis with V-Block, 20 MOA Picatinny rail, 22″ or 24″ barrel pre-threaded for suppressor, and adjustable cheekpiece and LOP. And like all Patriot rifles, the Patriot LR Tactical has Mossberg’s patented LBA™ (Lightning Bolt Action) user-adjustable trigger with 2 to 7-pound adjustment range. Priced at $1085.00 MSRP, the rifle is currently offered in 6.5mm Creedmoor and .308 Win with 22″ barrel, and 6.5 PRC with 24″ barrel. FULL Specs HERE.
Hornady 7mm PRC Cartridge
The 7mm PRC cartridge is the newest offering in Hornady’s Precision Rifle Cartridge series. The 7mm Precision Rifle Cartridge from Hornady delivers long, heavy caliber bullets in a standard long action. Fitting the niche between the 6.5 PRC and the 300 PRC, the 7mm PRC features temperature-stable, magnum speed propellants for consistent velocity and longer barrel life. Factory rifles are already available or simply swap the barrel on your 7mm Rem Mag or 300 Win Mag and reap the benefits of this long-action, centerfire rifle cartridge. For more details on ballistics and loading, watch this Ultimate Reloader.com video:
VIEW More GetZone SHOT Show Product Videos
Now in its 6th year, What’s Hot at SHOT is featured on GetZone.com, the online video destination that takes you from targets to trophies — and everywhere in between. Additionally, episodes air across the Media Lodge Platform of websites, on social media, and on GetZone’s YouTube channel.
After being held at the Kelbly’s Range in Ohio for decades, the Super Shoot, the top-tier short-range benchrest score competition, will be held May 22-25, 2023 at the Bench Rest Rifle Club in Missouri. This is a great location, much favored by elite benchrest shooters. This excellent range was the host of the 2022 NBRSA Nationals (photo above).
This will be Super Shoot 49. Historically, the Super Shoot has been the largest 100/200-yard Benchrest match in the world. This year the Super Shoot will be held at one of the premier benchrest facilities in the USA, the Bench Rest Rifle Club of St. Louis situated in Wright City, just northwest of St. Louis.
To shoot in the big match, it’s best to first register as a member of the SuperShootSports.com website. Membership is free. By becoming a member you will have access to online registration for the 49th Super Shoot and other features as they become available. There is no charge to join as a site member but there ARE fees to compete in the actual 2023 Super Shoot. So no payment is required initially to register on the site, but competition fees will be required at a later date. Match Sponsors include Shilen Rifles and Hottenstein Bullets.
The Bench Rest Rifle Club of St. Louis hosted the 2015 World Benchrest Championships:
The St. Louis shooting range facility is excellent. Forum member Alex M. posted: “The St. Louis Bench Rest Rifle Club is the finest shooting facility I have seen. The various rifle, pistol, shotgun, and archery ranges are great. They have a nice official trap field, together with manually operated traps. I shoot pistol and rifle with my wife at 25 to 600 yards. They have a very nice dedicated rimfire range, and training bays. I shoot their monthly F-Class matches (600 yards) where they award medals (1st, 2nd, 3rd) for F-Open, F-T/R and F-Bench. They also host the very popular Sierra Cup Challenge.”
Map to Bench Rest Rifle Club Range in Wright City, Missouri.
2022 Super Shoot — Last One at the Kelbly’s Range
The last Benchrest Super Shoot at the Kelbly’s Range was held May 24-27, 2022. This was the “final showdown” of the world’s group-shooting benchrest aces at the Kelbly’s range facility in Ohio. The overall 2022 Super Shoot Champion, with best combined 100 and 200-yard group-size Two Gun Aggregates (Aggs), was Jeff Summers. Gun writer James Mock noted: “The master of the Super Shoot, Jeff Summers, did it again. He fought the tough conditions and came out on top of the 200+ shooters at the final Kelbly-held Super Shoot. [That is] four times that Jeff has finished first. This shows that good guys can do well. Second place went to Ohioan Don Powell.” Summers finished with a 0.2513 Agg.
At SHOT Show 2023, Legacy Sports Int’l introduced a new line of Howa rifles that should be popular with hunters as well as PRS/NRL Factory-Class competitors. The new Howa Hera H7 rifles features an internal aluminum V-block chassis with modern composite external stock body. The forearm (aka “forestock”) is aluminum with M-LOK slots. The rear half of this German-engineered stock is fiberglass-reinforced polymer. These rifles are VERY affordable, with an $839.00 base MSRP.
The stock features a removable cheekpiece plus adjustable length-of-pull with 3 LOP inserts. The butt panel itself can be removed, allowing a bit of internal storage. The rifle ships with two AICS-compatible 5-round magazines.
The Hera H7 is offered in three colors: Tan, Black, or OD Green. Notably there are THREE barrel options: 24″ Carbon-wrapped, 24″ Heavy Contour, and 22″ Light Contour. These all have “suppressor-ready” threaded muzzles. We expect hunters will chose the Carbon-wrapped barrel, while PRS/NRL shooters will choose the Heavy-barrel configuration.
All the Hera H7 models feature a smooth-running Howa action fitted with the excellent HACT 2-stage trigger (see below). We’ve used this adjustable 2-stage trigger and it is among the best factory triggers you’ll find. These rifles all come with a Sub-MOA guarantee and a Lifetime Warranty. Two chamberings are currently offered: 6.5 Creedmoor and .308 Winchester. We hope Howa eventually offers a 6mm chambering in the future — 6mm Creedmoor, 6XC, 6GT, or 6mmBR.
We like all the key features of the Howa Hera H7 rifle — the action, the barrel options, the excellent 2-stage trigger, and the very affordable price (MSRP starts at just $839.00). However, we question the design of the lower part of the rear stock section. This starts with a downward angle like a normal hunting stock, but then it angles upward to the butt-pad. That V-shaped design might not work so well with a conventional rear bag. We suspect some owners will add a straight piece of Delrin or aluminum to act as a bag-rider.
Hera Arms H7 Chassis System
The Hera Arms H7 Chassis is a modern and easy-to-use stock system for the Howa (short action) system. Made of fiberglass-reinforced polymer, with aluminum V-block and aluminum forestock, this stock system comes with two spacers, a polymer cheekpiece and an AICS-compatible, 5-round magazine. The H7 stock system has M-Lok mount points for mounting various accessories. Shown above is the Tan version with carbon-wrapped 24″ barrel.
Howa 1500 HACT 2-Stage Trigger
Howa 1500s feature the very nice Howa HACT trigger. This is an adjustable, two-stage trigger, set for about 3 pounds (combined stages). Crisp and repeatable, this is an excellent trigger for a factory gun. There is no annoying Glock-style safety lever in the middle of the trigger blade. The 2-stage design and pull weight range works well for a hunting rifle or a rig for PRS competition. Rifleshooter.com says the Howa trigger is “one of the best factory triggers, along with Tikka. I’ve found the Howa trigger superior to a Remington 700 — the Howas doesn’t need to be replaced.”
Writing for the Western Outdoor News, WONews.com, Steve Comus has field-tested the HACT Trigger. Steve writes: “I always liked two-stage triggers, because of the way I could take-up the slack and then actually know when the rifle was going to go off. The take-up on the [HACT] trigger was fast and easy. The crisp, positive release when pressure was put on during the second stage [reminded me] of some of the target rifles I shot through the years.”
A fire in the home is always to be feared. And a fire in your reloading room can be disastrous. Near your reloading bench you probably have flammable solvents, and maybe gunpowder. What would happen if an electrical fire started in your reloading room? Would you be alerted? Do you have a proper fire extinguisher at hand?
Here’s a true story from Forum Member Joe O. (aka “Joecob”) that provides a valuable safety lesson. After Joe started up his old tumbler, an internal connector worked loose, causing an arc which started a fire in his basement reloading area. Luckily Joe had a functioning smoke detector, and a fire extinguisher.
Very few of us would worry about fire when we plug in a tumbler or other AC-powered reloading tool. But there is always the possibility of a malfunction and a fire. Quick thinking (and a handy extinguisher) prevented serious damage to Joe’s reloading room and house — but things could have been worse (much worse), had Joe not responded quickly.
Fire in the Reloading Room — Report by Joecob
The day before ‘Sandy’ hit I was cleaning brass the way I always have. I set the vibratory tumbler on the back of my reloading bench in the basement. I loaded the media hopper with 40 fired empty brass cases (and walnut media), plugged the cord in, turned the tumbler on and went back upstairs to watch TV. I could hear the tumbler running in the background.
About half an hour later I heard the basement smoke alarm go off. I ran downstairs. Flames were licking from the melting plastic of the tumbler.
I grabbed the nearby ABC cannister extinguisher and squirted out the fire and soaked the charred bench areas with water. Good thing I had the extinguisher! And I was glad I religiously store powder and primers properly — away from the bench (and everything else).
What caused the fire? It looks like an internal AC connector finally vibrated loose enough to arc and ignite the plastic. WHEH! I had been using that thing for 25 years the same way without mishap. Guess I should have known to periodically check the guts of a thing that plugs in and vibrates for a living?
Today I went out and bought a new even bigger ‘Pro’ ABC extinguisher, plus a dual-detector smoke alarm, and an ultrasonic cleaner. That experience was scarier than the storm. I hope this true account might help someone else to avoid a bad experience.
In his account, Joe refers to an “ABC” cannister fire extinguisher. The “ABC” refers to the fire classification rating: Class A (trash, wood, and paper), Class B (liquids and gases), and Class C (energized electrical equipment) fires. There are many brands of ABC-rated extinguishers.
The rechargeable Kidde 210 unit (sku 21005779) contains four pounds of a multipurpose monoammonium phosphate dry chemical extinguishing agent. It has a discharge time of 13 to 15 seconds, a discharge range of 10 to 15 feet, and an operating pressure of 100 PSI. The seamless aluminum cylinder measures 4.5 inches in diameter and 15.7 inches tall. The Kidde 210 has a 6-year limited warranty. This is Amazon’s #1 Best Seller among Fire Extinguishers.
In this video, Larry Keane, NSSF Sr. VP and General Counsel, talks with Montana State Attorney General Austin Knudsen. The two men met in the SHOT Show TV Studio to discuss Second Amendment issues, and the firearm industry. Keane noted that Atty. Gen. Knudsen is a recognized leader — among all state elected officials — in protecting the Second Amendment. Knudsen “leads the charge among all Republican AGs” on gun rights issues. Knudsen has filed legal actions to safeguard Second Amendment rights, and he recently spear-headed an investigation of UPS and FedEx Sharing of Gun Owner Info with Federal Agencies.
Montana Attorney General Knudsen Leads 18-State Effort Calling On UPS And FedEx To Clarify Gun-Purchase Tracking Polices
Seventeen state Attorneys General joined Montana Attorney General Austin Knudsen today in asking major shipping companies to clarify new policies that allow them to track firearm sales with unprecedented specificity and bypass warrant requirements to share that information with federal agencies.
Reports from Montana federal firearm license (FFL) holders made to Attorney General Knudsen’s office indicate that UPS and FedEx are now burdening them by requiring them to ship separately and track firearms, firearms parts, and firearm products so gun purchases can be tracked.
Knudsen and the coalition of attorneys general sent letters on November 29, 2022 to leadership at both companies requesting additional information on their new policies and the possibility that the effort was coordinated in part with the federal Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF).
“These demands, in tandem, allow [UPS/FedEx] to create a database of American gun purchasers and determine exactly what items they purchased… In doing so you, perhaps inadvertently, give federal agencies a workaround to normal warrant requirements. This allows [UPS/FedEx] to provide information at will or upon request to federal agencies—information detailing which Americans are buying what guns,” Attorney General Knudsen’s letters state.”
In addition to requesting updated FFL-related shipping policies from the two companies, Attorney General Knudsen asked them to clarify the following:
Did UPS/FedEx enact these policies with the goal of information sharing with the ATF or any other federal agency;
Did UPS/FedEx enact these policies at the request of officials in ATF, a different federal agency, or on its own initiative;
If UPS/FedEx implemented these policies at the request of a federal agency, please identify that agency, the officials who made that request, the nature of that communication, and any legal authorization cited by those officials;
If UPS/FedEx changed its policies on its own initiative, please explain why it made those changes;
Did UPS/FedEx communicate or coordinate with each other in making these changes;
Did ATF or other federal agency employees help draft the updated shipping agreements?
The 2023 Safari Club International (SCI) Convention is a month away. The event runs in Nashville, Tennessee during the weekend of February 22-25, 2023. In years past, the SCI show was held in Las Vegas, but we think this new Nashville venue is a great choice.
The SCI states: “Join us in the birthplace of country music to see world class musicians, guest speakers, exhibitions, and hundreds of domestic and international hunting guides. Be sure to get YOUR ticket today to the Ultimate Sportsmen’s Market!” CLICK HERE to register or get more INFO.
Key Attractions at SCI 2023 Convention:
Exhibits by Outfitters and Manufacturers
Hundreds of professional hunters and outfitters from throughout the world will exhibit at the Convention. In addition, top manufacturers from the outdoor industry will be there, showing off the latest firearms, optics, ammunition, archery gear, and accessories.
Auctions — Live, Silent, and Online
Over 20 live, silent, day, evening and online auctions will be held during the SCI convention next month in Nashville. Bid on hunt experiences, exceptional firearms, fine art and jewelry, all 100% donated by world renowned outfitters and manufacturers. Proceeds from SCI’s auctions support hunter advocacy as well as SCI Foundation’s conservation and education programs.
Seminars and Speakers
Over 70 seminars, “Meet and Greets”, and keynote speakers pack the schedule at the 2023 SGI Convention. Educational, informative seminar presentations cover the spectrum of hunting, fishing, shooting, and outdoor adventures.
Based on discussions with ATF representatives at SHOT Show 2023, it appears there are now over 3,600,000 registered suppressors (silencers), in the USA. Gun Journalist Dean Weingarten reports: “The total number of silencer tax stamps in existence in the USA as of 2019 was 2,042,719. The total number of silencer tax stamps existent in the USA as of 2020 was 2,664,774. The increase was 622,055 from 2019 to 2020. The number of legal silencers in the United States has not been updated since 2020. It is now 2023. When this correspondent asked representatives at the briefing if the numbers presented represented about a one million increase in legal silencers from 2020 to the end of 2022, they stated the number was reasonably correct.” That would mean the number of legal silencers/suppressors in the United States now exceeds 3.6 million in year 2023.
Procedure for Obtaining a Suppressor
Suppressors are now legal in 42 U.S. States. There are certain legal requirements for obtaining a suppressor, including paying a $200 Tax Stamp. To own a suppressor you must be legally eligible to purchase a firearm, pass a BATFE background check, pay a one time $200 Transfer Tax, and satisfy age requirements. (SEE ALL Requirements). In most (but not all) of those states you can use a suppressor for hunting. The eight (mostly blue) states which still prohibit civilian suppressor ownership are: California, Delaware, Hawaii, Illinois, Massachusetts, New Jersey, New York, and Rhode Island. READ FULL ARTICLE on GunsAmerica Digest.
Expect Delays on Form 4 Request for Suppressor Permits
An ATF presentation at SHOT Show showed how many NFA applications were processed in the last three fiscal years up to September 30, 2022. The vast majority of these applications were for suppressors, using ATF Form 4.
This huge increase in NFA Form 4 applications for suppressors means that suppressor applicants can expect very significant delays in processing. An ATF slide show indicated that the ATF’s Form 4 processing now takes an average of 270 days for the eForm, and a full 315 days for paper forms. That’s over 10 months!
Dean Weingarten observed: “The presentation made a good case the NFA division of the ATF is overwhelmed with NFA applications, leading to significant wait times to process those applications. The NFA division is experiencing considerable stress in processing NFA forms expeditiously, especially Form 4s. The ATF does not receive the $200 tax for NFA applications. The money goes directly to the general fund. Therefore, the NFA cannot hire more people to process more forms.”
Doug Koenig is one of the best action shooters in history — both with rifle and pistol. In a recent video from SHOT Show Range Day, Doug, a 19-time Bianchi Cup Champion and a PRS Production Division Champion, talks about the disciplines he shoots, both rifle and pistol. He notes he has moved to Florida and he will be starting his own shooting school, which will open at the end of the year.
In this video, Doug is interviewed by Shooting Sports USA Editor John Parker. Koenig talks about his namesake Precision Rifle Series competition held in Colorado, the revitalized U.S. Steel Nationals and more.
You can see more Doug Koenig PRS/NRL videos on the Pursuit Channel, including coverage of precision rifle matches in Pennsylvania, Colorado, and Wyoming. The videos are worth watching for the scenery as well as the rifle action.
Doug Koenig — Action Pistol Master
Doug Koenig has won the Bianchi Cup a remarkable 19 times. No one else, man or woman, is even close to that achievement. After his Bianchi victory in 2021, Doug said: “Winning the Bianchi Cup title for the 19th time in my career is very special on its own. But to do so after the difficult year we’ve all faced, and to do so wearing a Team Ruger jersey, has made this win that much more meaningful for me.”
What skills does it take to win a Bianchi Cup? You need speed, accuracy, control, and discipline. Koenig explains some of these techniques in the video below. You’ll find 30 more Doug Koenig videos on the NSSF YouTube Channel:
Australian defense contractor NIOA has announced the 100% acquisition of the industry-leading rifle design and manufacturing company, Barrett Firearms. Financial terms of the transaction were not disclosed. The American Barrett factory will continue to operate in the USA at its Murfreesboro, Tennessee location and all workers will be retained. Ronnie Barrett and Chris Barrett will serve as executive advisers to NIOA.
NIOA Group CEO Robert Nioa said the two family-owned companies came together out of a shared commitment to quality, innovation, loyalty, and mission: “NIOA’s association with Barrett dates back to 2008. We have been inspired by the story of Barrett and admire what Ronnie, Chris and the family have built over more than four decades. Together we share the same mission – combining our expertise and family business values will ensure Barrett carries on building the finest products in the world.”
Mr. Nioa confirmed the company would continue to operate under the Barrett brand as a separate division within the NIOA Group alongside NIOA Australia, NIOA New Zealand, the Australian Missile Corporation and the group’s investment in joint venture company Rheinmetall NIOA Munitions.
Outdoor Wire Editor Jim Shephard interviewed Robert Nioa recently. Jim noted that Barrett’s production will remain in the USA: “There’s absolutely no intention to move Barrett anywhere. In fact, Nioa told me in no uncertain terms that he isn’t looking to move Barrett, he’s looking forward to growing it beyond what it is today. And, he says, ‘I love Murfreesboro. We’re not going anywhere’.”
All management and staff at the Murfreesboro manufacturing facility in Tennessee have been retained and production will continue as normal. Over time it is expected that manufacturing activities in Murfreesboro will be expanded. As part of the NIOA acquisition, Barrett President Sam Shallenberger has been promoted to the role of Chief Executive Officer while long-serving Barrett Chief Operating Officer Bryan James becomes President. Ronnie Barrett and Chris Barrett will provide ongoing support as executive advisers to Barrett and the NIOA Group.
Barrett founder Ronnie Barrett said “Today marks the beginning of a new chapter in the Barrett story. Rob and the NIOA team have great respect for the legacy Barrett has created as the leader in long range precision rifles. It’s reassuring to know Barrett will be in good hands with a family-owned company that is focused on manufacturing and delivering world-class firearms and munitions to a global network.”
About NIOA
NIOA is the largest Australian-owned supplier of firearms, weapons and ammunition to the Australian and New Zealand defense forces, law enforcement agencies, and commercial markets. It has long-standing trusted relationships with American companies such as Vista Outdoors, Leupold, General Dynamics, Northrup Grumman, and the Winchester-operated Lake City ammunition plant.
NIOA is a major tenant at the Australian government-owned, contractor-operated (GOCO) munitions facility at Benalla in Victoria. There NIOA currently manufactures 120mm munitions for the Abrams tank along with 30mm and 35mm cannon ammunition.
The company is contracted to deliver major weapons programs for the Australian and New Zealand militaries and has recently established an artillery shell forging factory in Maryborough, Queensland in a joint venture with Rheinmetall of Germany.
About Barrett Firearms
Barrett has been a family-owned and operated company and the world leader in long-range, large-caliber, precision rifle design and manufacturing.
Barrett products are used by civilians, sport shooters, law enforcement agencies, the United States military and more than 75 U.S. DOS-approved countries around the world.
The Barrett Quality Management System (QMS) has earned the prestigious ISO 9001:2015 certification for the design and manufacture of firearms, ammunition, and accessories, and for sniper systems training.
We like all the key features of the Howa Hera H7 rifle — the action, the barrel options, the excellent 2-stage trigger, and the very affordable price (MSRP starts at just $839.00). However, we question the design of the lower part of the rear stock section. This starts with a downward angle like a normal hunting stock, but then it angles upward to the butt-pad. That V-shaped design might not work so well with a conventional rear bag. We suspect some owners will add a straight piece of Delrin or aluminum to act as a bag-rider.
Howa 1500 HACT 2-Stage Trigger
A fire in the home is always to be feared. And a fire in your reloading room can be disastrous. Near your reloading bench you probably have flammable solvents, and maybe gunpowder. What would happen if an electrical fire started in your reloading room? Would you be alerted? Do you have a proper fire extinguisher at hand?
I grabbed the nearby ABC cannister extinguisher and squirted out the fire and soaked the charred bench areas with water. Good thing I had the extinguisher! And I was glad I religiously store powder and primers properly — away from the bench (and everything else).
