The Civilian Marksmanship Program will have a huge new training and shooting facility thanks to Larry and Brenda Potterfield, the founders of MidwayUSA. The CMP announced that it received a massive gift from the Potterfields — a 76,800-square-foot facility along with more than five acres of land in Columbia, Missouri. Conversion/renovation of the facility to a competition center is expected to begin in early 2023.
The 76,800-square-foot MidwayUSA warehouse will be transformed into a Competition Center focused on indoor smallbore rifle and air rifle. The facility will be equipped with 100 air rifle targets and 50 smallbore targets. Programs will include coach training, monthly matches, summer camps, outreach camps, and more. Notably, on-site cameras and monitors will provide live-action viewing for up to 1,000 spectators. The Center will be open to the public year-round for shooting and training.
“On behalf of CMP, I want to thank the Potterfield family for this generous gift,” said Judy Legerski, outgoing Chairman of the CMP Board of Directors. “The timing couldn’t be better. August is National Shooting Sports month, and we look forward to developing this Competition Center to continue our support of youth shooting sports. For generations, this Competition Center will have tremendous impact on youth, families and the community. We look forward to partnering with the Potterfields in creating a site that meet the needs of both beginning marksmen and competitive shooters[.]”
When conversion of the donated warehouse is complete, the new CMP Missouri competition center will have 100 rifle target stations, with a firing hall similar to the 80-position CMP South Competition Center.
“We are fortunate and pleased to donate this building to the Civilian Marksmanship Program, an organization who shares our vision for youth shooting sports,” said Larry Potterfield, MidwayUSA Founder and Executive Chair of Board of Directors. “We’re confident the CMP will utilize the facility to develop new and existing competitive shooters and continue to add value to our local community.”
About the Civilian Marksmanship Program
The Civilian Marksmanship Program is a federally chartered 501(c)(3) non-profit corporation dedicated to responsible use of firearms and air guns through gun safety training, marksmanship training, and competitions. The CMP’s key mission is promoting marksmanship training and competition for citizens of the United States. For more information, visit TheCMP.org.
About Larry and Brenda Potterfield and MidwayUSA
Both country kids from Missouri, Larry and Brenda Potterfield turned their passion for shooting sports into a career by opening a small gun shop in 1977 that would eventually become MidwayUSA. They instilled family values like honesty, integrity, and respect for others into the business, and strive to maintain this culture with each new employee.
What’s old is new again. The metal-framed pistol is making a comeback. Smith & Wesson has just introduced its new M&P9 M2.0 METAL, S&W’s first full-size M&P pistol in an all-metal configuration. Built with a T6 aluminum frame finished in Tungsten Gray Cerakote, this 9mm Luger pistol includes a 4.25″ barrel, M2.0 flat face trigger, and optics-ready slide.
Why go to a metal frame? The T6 Aluminum frame is heavier than polymer. This increases the overall weight of the pistol and lowers the center of gravity considerably. The gun therefore has less perceived recoil (less “snap”) and noticeably less muzzle flip. The new M&P M2.0 METAL is listed at 30.0 oz. unloaded, while the polymer M&P M2.0 is 24.7 oz. unloaded.
New M&P9 M2.0 METAL is 43% More Expensive Than Polymer M&P9 M2.0
The new M&P9 M2.0 METAL has a $899.00 MSRP, making it 43% more expensive than the polymer-framed M&P9 M2.0 which has a $629.00 MSRP. Is the aluminum frame worth the extra money? It depends. With a lower center of gravity and more mass, the M2.0 METAL will definitely be a better “gun games” pistol. But it will also be 5.3 oz. heavier — not so great for all-day carry.
For persons who use their M&P mostly for target work and gun games, the heavier weight and reduced muzzle flip is a plus. Owners may also like the rigidity of the Cerakoted Aluminum frame. S&W has a new enhanced sear for this model, which delivers a “shorter take-up, and cleaner break”. That also should help action pistol competitors.
Full Compatability with Existing M&P9 Magazines and Holsters
The M&P9 M2.0 METAL will accept any M&P9 M2.0 17-round 9mm magazine and will fit any normal M&P9 fullsize compatible holster. Notable features include enhanced sear for lighter, crisper trigger break, an optics-ready slide, and new “flat face” trigger.
M&P9 M2.0 METAL FEATURES
T6 Aluminum Frame with Tungsten Gray Cerakote® Finish
Optics-Ready pistol slide has mounting recess for red dots
Four interchangeable palmswell grip inserts: S, M, ML, L
Textured polymer front strap
Wide slide stop and reversible magazine release
M2.0 flat face trigger for consistent finger placement
Forward slide serrations and Picatinny-style frame rail
Enhanced sear for lighter, crisper trigger let-off
Fits all standard M&P9 compatible holsters
Accepts any 17-round 9mm M2.0™ magazine
Comes with two 17-round magazines.
Jerry Miculek Tests New M&P9 M2.0 Metal Pistol — Says It Shows Exceptional Accuracy
The U.S. Army Marksmanship Unit regularly published a reloading “how-to” article on the USAMU Facebook page. One excellent “Handloading Hump Day” post covered preparation of once-fired 5.56x45mm brass. This article, the first in a 3-part series, has many useful tips. If you shoot a rifle chambered in .223 Rem or 5.56x45mm, this article is worth reading. You can obtain once-fired Lake City 5.56x45mm brass for less than half the cost of premium .223 Rem brass.
This week, Handloading Hump-Day will answer a special request from several competitive shooters who asked about procedures for morphing once-fired GI 5.56mm brass into accurate match brass for NRA High Power Rifle use. The USAMU has used virgin Lake City (LC) 5.56 brass to win National Championships and set National Records for many years. In this 3-part series, we’ll share techniques proven to wring match-winning accuracy from combat-grade brass.
GI brass has an excellent attribute, worth noting — it is virtually indestructible. Due to its NATO-spec hardness, the primer pockets last much longer than most commercial brass when using loads at appropriate pressures.
Preparing Once-Fired GI 5.56 Brass for Reloading (Part 1 of 3)
Assuming our readers will be getting brass once-fired as received from surplus dealers, the following steps can help process the low-cost raw material into reliably accurate components.
1. Clean the Brass
First, clean the brass of any dirt/mud/debris, if applicable. Depending on the brass’s condition, washing it in a soap solution followed by a thorough rinsing may help. [This step also extends the life of the tumbling media.] Approaches range from low-tech, using gallon jugs 1/2 full of water/dish soap plus brass and shaking vigorously, to more high-tech, expensive and time-consuming methods.
2. Wet-Tumbling Options (Be Sure to Dry the Brass)
When applying the final cleaning/polish, some use tumblers with liquid cleaning media and stainless steel pins for a brilliant shine inside and out, while others take the traditional vibratory tumbler/ground media approach. Degree of case shine is purely personal preference, but the key issue is simple cleanliness to avoid scratching ones’ dies.
If a liquid cleaner is used, be SURE to dry the cases thoroughly to preclude corrosion inside. One method is to dump the wet brass into an old pillow case, then tilt it left/right so the cases re-orient themselves while shifting from corner to corner. Several repetitions, pausing at each corner until water stops draining, will remove most water. They can then be left to air-dry on a towel, or can be dried in a warm (150° F-200° F max) oven for a few minutes to speed evaporation.
Shown below are Lake City cases after cleaning with Stainless Media (STM). Note: STM Case cleaning was done by a third party, not the USAMU, which does not endorse any particular cleaning method.
NOTE: The USAMU Handloading (HL) Shop does not RE-load fired 5.56 brass. We use virgin LC brass with our chosen primer already staked in place. However, our staff has extensive personal experience reloading GI brass for competition, which will supplement the Shop’s customary steps. In handloading, as in life, there are many ways to accomplish any given task. Our suggestions are note presented as the “only way,” by any means. Time for loading/practicing is always at a premium. Readers who have more efficient, alternative methods that maintain top accuracy are invited to share them here.
3. Inspect Every Case
Once dry, inspect each case for significant deformation (i.e., someone stepped on it), damaged mouths/necks and case head/rim damage. Some rifles’ ejectors actually dig small chunks of brass out of the case head — obviously, not ideal for precision shooting. Similarly, some extractors can bend the case rims so badly that distortion is visible when spinning them in one’s fingers. These can be used for plinking, but our match brass should have straight, undamaged rims.
Dented case mouths are common, and these can easily be rounded using a conical, tapered tool, [such as a .223 expander mandrel. A dummy 7.62 or .30-06 cartridge with a FMJ spitzer can also work.] If most of your brass is of one headstamp, this is a good time to cull out any odd cases.
4. Check the Primers Before Decapping
Your clean, dry and inspected brass is now ready for full-length sizing, decapping and re-priming. Historically, primer crimps on GI brass have caused some head-scratching (and vile language) among handloaders. Our next installment will detail efficient, easy and practical methods to remove primer crimp, plus other useful handloading tips. Until next week, Good Shooting!
Accuracy Potential of Mil-Surp 5.56×45 Brass
So, how accurate can previously-fired GI surplus brass be in a good National Match AR-15? Well, here’s a data point from many years ago that might be of interest. A High Power shooter who wrote for the late Precision Shooting magazine took a Bill Wylde-built AR match rifle to a registered Benchrest match. He had no difficulty obtaining consistent 0.5-0.6 MOA accuracy at 200 yards using LC brass and a generic “practice” load that was not tuned to his rifle.
Folks, if you are thinking about a major gun-related product purchase, today’s the day. Right now Brownells has discount codes that offer up to 18% off your purchases. What’s the catch? Well some of these discount codes expire today August 31st at 11:59 pm Central Time, so don’t delay. With Code WORK45 you can save $45 on a purchase of $250 or more. Or Use Code AUGUST55 to save $55 off $500 (11%). If you’re planning a big buy, use code AUGUST120 to save a whopping $120 on a purchase of $1000 or more. NOTE: Some Brownells discount codes (see below) expire at the end of August, while others may expire later. If one Code doesn’t work, try another. This codes apply to firearms components, reloading supplies, tools, optics and more…
COMING SOON: In a couple days, we’re advised that a new Brownells Labor Day Sale Code could activate — Use Code LABORDAY to Save $55 Off $300 (18%). (Guys — this has not been activated yet, so we can’t be absolutely sure, but this CODE was posted on Gun.Deals/coupons.)
With inflation and rising prices, it’s more important than ever to take advantage of discounts and promotions. We’ve located the latest Discount Codes for Brownells Purchases that can save you 10% (or more) on your purchases. These Brownells Discount Codes qualify you for significant savings on guns, ammo, parts, and reloading components at Brownells. Use these Codes during check-out and the savings will reduce your net cost. For example, save $55 on a $500 purchase, $30 off $300, or $25 off $250 — saving 10% or more.
We know some guys who make their own stocks, and others who do their own chambering. But consider this, Robert Carnell of Australia built his own state-of-the-art, water-cooled, tension-barrel Rail Gun, even including the action. That’s right, Robert designed and crafted his own precision action. This has got to be the ultimate home gunsmithing, do-it-yourself (DIY) project.
Carnell is an accomplished benchrest shooter and past Australian Sporter Class Champion. In 1993 he won a Silver Medal at the World Championships. But Carnell is far more than an ace trigger-puller. Robert is a skilled and creative “home gunsmith” who has crafted his own custom action and built his own railguns from scratch. Robert also runs the Austrialian Benchrest Bulletin website.
Home-Built Rail Gun — Aussie Innovation
Below are photos of one of Rob Carnell’s most amazing builds. This liquid-cooled, tension-barrel rail gun is a great example of self-reliant Aussie engineering. The barrel runs inside a coolent-filled, large-diameter sleeve, much like an old water-cooled machine gun. This is the fourth rail gun that Rob built, and the second fitted with a tensioned barrel.
Robert explains: “My railgun design has a 1.75″ barrel under tension inside an aluminium tube filled with radiator coolant. There is nearly a gallon of coolant, and the barrel stays cool no matter how many shots I seem to fire, or how quickly they are shot. The brass nut on the front rides on a nylon bearing and can be tightened to get the best accuracy. I am a believer in the ‘tuner’ idea and this seems to work for me. The main tube is thick-walled aluminium 600mm (24″) long. There is a flange at both ends. The flange at the back fits onto the barrel before the action is screwed on. The front flange is a press-fit into the tube, then there is a brass nut that fits over the barrel and screws against a nylon washer on the front flange. The Railgun’s base is aluminium and has the standard adjustments — windage, elevation and a sighter cam. In addition, there is a 1/10 thou dial indicator for windage. This allows me to zero the indicator and shoot my group. If I need to add a bit of windage for a condition, I can quickly get back to the original position if my condition comes back.”
Home-Built Action Uses Rem Bolt
Rob’s rail gun uses his own home-made stainless action, which features Panda-spec threads and a modified Remington 700 aftermarket bolt. Not bad for a do-it-yourself project we’d say! CLICK HERE to read how Rob designed and built the action.
Small patches are not very efficient at distributing bore cleaning liquids inside your bore. The problem with a tight-fitting patch is that the solvent gets squeezed off in the first few inches. You can switch to a smaller jag, or a bore mop, but there is an even better way to get an ample amount of solvent in your bore. Just spray directly into the bore with a wash bottle, an inexpensive plastic bottle with an L-shaped dispensing neck, tapered at the end.
When using the wash bottle, you can either just plug the breech and spray from the muzzle end (where most copper fouling is), or, alternately, put the wash bottle neck directly in the chamber and spray forward. When spraying from the chamber forward, you may need to use a rubber O-Ring to seal off the action… depending on the bore size and the particular wash bottle’s neck spout diameter. We prefer to plug the breech and squirt from the muzzle.
Bottle Solvent Application Great for Smaller Bores
Using wet patches or wet brushes is an inefficient way to really saturate the tight bores of 17s, 20s, and 22s. Even with a cotton bore mop, most of the solvent will be squeezed out before it gets to the end of the bore, where most copper fouling occurs. For these smaller 17, 20, and 22-caliber bores, you can just take the wash bottle and stick the tapered nozzle right in the chamber. The tapered end will press fit in the throat, sealing off the chamber. With the barrel slightly nose-down, give the bottle a couple good squirts until the solvent mists out the muzzle. In just a few seconds, this will put more solvent in the bore than a half-dozen wet patches.
A solvent-filled wash bottle is also handy for wetting your brushes. It’s much easier to saturate a bore brush (without spilling solvent on your stock), by using the wash bottle. You can get wash bottles from USPlastic.com, Amazon.com, or lab supply stores.
For the first time since the outbreak of the COVID-19 pandemic, the annual Gun Rights Policy Conference (GRPC) — one of the most important events of the year for Second Amendment Rights — will return as an in-person, rather than a virtual, event. The conference will take place the weekend of September 30 through October 2, 2022 in Texas. The conference will be held at the Westin Dallas-Fort Worth Airport hotel, 4545 W. John Carpenter Freeway, Irving, Texas 75063.
You can attend the GRPC event for FREE — there is no admission fee. Register now via the Second Amendment Foundation website: www.SAF.org/GRPC.
Co-sponsored by the Second Amendment Foundation (SAF) and Citizens Committee for the Right to Keep and Bear Arms (CCRKBA), the 37th annual GRPC will feature a weekend of panel discussions, special reports by leading gun rights advocates, an awards luncheon and more. The event brings together scores of speakers from across the country to offer insights on current and upcoming court cases, the outlook for state and federal elections in November, concealed and Constitutional carry updates and the impact of the Supreme Court ruling in New York State Rifle & Pistol Association v. Bruen, which affirmed the right to legally bear arms in public for personal protection.
Watch Podcast Interview with Second Amendment Foundation Leader Alan Gottlieb
SAF and CCRKBA leaders will be joined by representatives from Gun Owners of America, the National Rifle Association, Doctors for Responsible Gun Ownership, Firearms Policy Coalition and Jews for the Preservation of Firearms Ownership.
The 2022 GRPC will feature some 70 speakers on subjects ranging from the elections, litigation, legislation to personal protection. Expected attendance at this year’s event will be between 600 and 800 Second Amendment activists and experts from across the country. Attendance is free, information and on-line registration is available at www.SAF.org/GRPC.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Palmetto State Armory — PSA AR-15 Lower Receiver, $59.99
⏺ Very good deal and AR lower — get one while you can
President Biden and his buddies in Washington want to ban ARs and other modern sporting rifles. The core component for a custom AR build is a milspec AR lower receiver. Now for just $59.99 you can get a quality PSA AR-15 “Stealth” Lower Receiver. This quality lower features no rollmark on the left hand side. These PSA lowers have quality 7075-T6 aluminum construction and will accept all standard components and popular trigger groups. At this low $59.99 price, you might want to buy a couple.
2. Bruno’s — BAT Actions IN-STOCK with Free Shipping
⏺ BAT makes exceptionally good actions which have won many championships
Did you know that the average wait time for a custom action is now about 12 months? Skip the wait and grab one of the many superb BAT Actions available right now at Bruno Shooters Supply. A wide selection of BAT actions are in stock now, ready for immediate delivery to your FFL. If you order during the current sale, these actions qualify for FREE SHIPPING.
⏺ Excellent FFP scope for PRS/NRL competition, good power range
Need a quality, durable FFP scope for PRS or NRL matches? An excellent yet very affordable option is the Vortex Viper 5-25x50mm riflescope. PRS/NRL competitors have praised this scope for its optical quality and toughness. The glass-etched EBR-2D MRAD reticle offers very precise MILrad markings for elevation hold-overs and/or wind corrections. For low-light conditions, this Vortex Viper offers 10 intensity levels with off positions between each setting.
4. Amazon — RCBS Partner Press, $81.93
⏺ Good choice for secondary press for decapping and bullet seating duties
If you load at the range or need a secondary press the RCBS Partner Press is a great choice. The very affordable Partner Press is easy to use and easy to transport, making it a good choice for loading at the range. And it works well as a smaller, secondary press for your home reloading center. We’ve used a Partner Press effectively for decapping, neck-sizing, and many other tasks. The current $81.93 price is a bargain. Note: Accessory base plate not included.
5. Natchez — Rimfire and Centerfire Ammunition Sale
⏺ Great savings on big selection of rifle, pistol and shotgun ammo
Thankfully, ammunition is becoming more available these days, and prices are starting to come down. The latest Natchez Ammo Sale offers a wide range of pistol, rifle, and shotgun ammo at great prices — up to 64% off. There are some great deals on bulk 9mm ammo, and pistol shooters will also find good defensive ammo with hollow-point projectiles. Natchez is also running some attractive deals on CCI and Remington rimfire ammo.
6. Graf & Sons — Hornady Sonic Cleaner, $109.99
⏺ Quality ultrasonic cleaning machine at very good price
Are you looking for a different way to clean you brass? Consider the Hornady Sonic Cleaner which removes carbon residue from the inside and outside of cartridge cases with high frequency ultrasonic energy and a specialized cleaning solution. Unlike case tumblers, the Lock-N-Load Sonic Cleaner effectively cleans the inner surfaces of cartridge cases as well as the primer pockets.
⏺ Very Good eye protection with 5 lenses — clear, yellow, orange, amber, gray
We recommend wearing quality eye protection whenever you go shooting — even with rimfire guns. This excellent Radians kit includes five different ANSI Z87.1-certified lenses, so you can select the optimal lens type for your shooting sport and light conditions. The Radians Glasses Kit, now just $20.89, includes clear, yellow, orange, dark amber, and dark gray lenses that are easily interchangeable and very durable. This kit includes neoprene carrying case, neck cord, and microfiber lens cloth bag.
8. Amazon — FalconTac First Aid Kit, $49.95
⏺ Very well-equipped first aid kit — for home, range, or vehicle
Wise firearms owners and outdoorsmen will keep a good first aid kit in their vehicles wherever they travel. The FalconTac Trauma first aid kit offers important treatment products for a wide variety of injuries, from minor cuts to bullet wounds. This $49.95 FalconTac Kit contains essential supplies for hemorrhage control, including military tourniquet, tactical pressure dressing, and compressed gauze.
9. Amazon — 14-In-1 Multitool, $20.99
⏺ Great price on versatile multi-tool that performs myriad functions
The 14-In-1 Multitool with Safety Lock offers great capabilities for a modest $20.99 price. This handy multitool includes a sharp knife blade plus a serrated knife. Then there are a dozen specialized components — multiple plier heads (long nose, round nose pliers, cutting pliers), Philips screwdriver, 3 slotted screwdrivers (small, medium, large), hook remover, double-sided file, small scraper, can opener, and bottle opener. This compact multi-tool stores easily in a backpack or your vehicle.
Sebastian (“Seb”) Lambang, the brilliant designer/builder of SEB Shooting Rests, is also one darn good shooter, as demonstrated at a recent major rifle competition in Australia. Shooting at multiple yardages from 300 to 1000 yards, Seb won the Queens Series F-Open title, and finished third overall in the Duncan & Queens Series Grand Agg. That’s mighty good marksmanship considering it was done with an F-Open rifle Seb had just acquired and never shot before! Congrats to Seb for his outstanding performance!
One of the factors in Seb’s success was an all-new front rest that Seb designed and crafted himself. This new SEB NEO-X rest has many advanced features including a swivel-adjusting head, a wide footprint, and the ability to fold-up for easier transport. We have a full report on the impressive NEO-X rest in this story, with bench testing videos by F-Class John.
The 2022 QRA Duncan & Queens Series in Australia
Report by Sebastian Lambang
This was my first overseas travel since the Berger Southwest Nationals in early 2020 [right before the COVID-19 shutdowns]. Three years ago I participated in the WARA Queens 2019 in Perth shooting the F-TR, and this was my second F-Open match in Australia. Usually I shoot the F-TR division. However this year I was invited to shoot the F-Open in the QRA Queens 2022 by Jason Mayers, my Australian dealer. Jason has been my “Little Big Brother” and my best friend in Australia. So why not? Let’s just do it!
Jason has two, twin F-Open guns. I bought one and used it during this match. Chambered for 7mm RSAUM, this F-Open rifle features a Barnard action, Marty Lobert trigger, Bartlein barrel with a large tuner in the front, McMillan Kestros ZR stock, and a Nightforce scope. I was shooting 7mm 180gr Berger bullets.
Jason did all of the load development, provided the ammunition and all equipment needed to shoot. The rifle shot and tracked very well — I loved it! Yes, I used a NEO-X prototype unit during the Queens match, i.e. the one that Jason used during the Duncan matches. The second unit just came in the day before the Queens started, it is set for left-handed shooter like him. I used his NEO rest during the Duncan Series.
We had various conditions during the match, from sunny, misty and rainy, to dead calm conditions and switchy wind. I was very fortunate to be able to pick the right time and shot well in the final 900 and 1000-yard stages, winning both yardages! With those results at 900/1000 I finished first in the Queens Match in F-Open. I then finished third overall in the Duncan & Queens Series F-Open Grand Aggregate.
Jason Mayers (L) and Seb Lambang (R). Seb had never shot this F-Open rifle before he piloted it to victory in the 2022 QRA Queens match.
Overcoming Challenges — Rifle Suffers Trigger Failure
I had a trigger failure which caused my score to drop by at least 2 points in the 1000-yard session just before the final day. I dropped 4 points in a good condition and it made me really upset! But huge thanks must go to Mark Fairbairn. Mark helped me to fix the rifle and loaned me a trigger so I still had a few minutes to finish the string!
After that trigger problem I chose to not give up! I hoped for a miracle, to be able to choose the right time to start to shoot (wind wise), to be good enough in reading the current conditions and to get the best possible scores! Jason’s encouragement in the morning that I could still win the match really helped boost my motivation! I do not know why or how but I retained confidence to shoot well and to win the match.
Thanks to Family, Friends, and Fellow Competitors
My sincere thanks to my lovely wife Lily who always supports and loves me as what I am all the time! Thanks again to my Little Big Brother Jason Mayers who has always helped and supported me genuinely! Without his help and support I wouldn’t have been able to win the match so it’s a more about him than me. My Thanks to QRA and all of the Match Organizers, Range Officers, Staffers, and Volunteers during the championship. My thanks also to all competitors and for the warmth and generous welcome!
Thoughts about the New NE0-X from its Inventor
I am really happy that the NEO-X works as expected, too. I think my effort to make even a better rest has been paid off. The New NEO-X combines the best features from the NEO rest and Mini rest in one package with a few extra features. The new NEO-X is designed for those who seek a light-compact rest and want the best one!
Great Scores Shot by Seb Lambang with new NEO-X Front Rest
Seb shot superbly to win the Queens Series in F-Open Division and take third overall in the combined Duncan and Queens Series Grand Aggregate. Here are two of Seb’s targets, as electronically logged — 1000 yards on the left, 600 yards on the right. NOTE: In Australia, the maximum numerical ring points value is 6, not 10 as in North America. But the center-most ring does register “X” as here. The match included targets shot at 300, 500, 600, 900, and 1000 yards.
Bench Testing with SEB NEO-X Prototype — VERY Impressive
Our friend F-Class John recently received one of the very first NEO-X prototypes sent to North America. John assembled the impressive new rest and took it to the range for testing. John was very impressed with the new rest to say the least. He told us: “This really is state-of-the art. I’m very impressed with how it folds compactly for transport, yet is extremely stable, with a nice open platform in the rear.” John noted that the swivel top allows precise alignment with your targets, even if the rest is not positioned perfectly on the ground. That helps when a shooter needs to set up quickly at a new yardage during a match.
When testing with his 7mm F-Open rifle, John noted that the rest is very solid on the bench and does not bump or wobble. See his observations in this exclusive test video:
Commentary by F-Class John
Here’s my quick review after shooting off the NEO-X prototype a couple times. It’s AMAZINGLY STABLE. The way it unfolds not only makes for a wide and stable footprint, but it also leaves lots of room for the shooter to work with, while controlling the joystick.
Another cool thing is that you don’t, technically, even have to lock the bridge down. The bridge is 100% stable after moving it up or down and the lock is more academic than anything.
The swivel head is a feature people will have seen on other rests but the way you can shoose to leave it swiveled or locked down is great. This new NEO-X is going to change things, I have no doubt.
Unboxing SEB NE0-X Prototype
John noted: “The way the NEO-X folds up is amazing, perfect for transporting. It weighs under 20 pounds fully loaded with all parts, joystick, and control arm.”
The Tactical Rifle Shooters Facebook Group recently showcased tools used to measure case headspace before and after “bumping” the shoulder. After a case is fired, hand-loaders who full-length size their cases will typically bump the shoulders back anywhere from .001″ to .0035″, depending on the rifle and application. With our 6mmBR and Dasher cases we like about .0015″ bump.
You want the amount of case sizing and bump to be the same for all your brass. To ensure uniformity, it makes sense to measure your cases before and after the FL sizing process. When we have time, we check every case. Other folks will simply check the first 3-4 cases coming out of the FL sizing die to ensure the FL die setting is correct and delivering desired headspace/bump.
1. Whidden Gunworks Shoulder Bump Gauge
There are a variety of tools that can be used to measure shoulder bump. Our favorite is a special cartridge-specific bushing made by Whidden Gunworks. The Whidden Shoulder Bump Gauge enables you to adjust your sizing die to the desired measurement. The bump gauge is attached to your calipers with a set screw and determines the measurement from the base to the shoulder of the case. The photo below, from Tactical Rifle Shooters, shows the Whidden Bump Gauge for the .375 CheyTac cartridge.
2. Dave Manson Vertical Comparator with Dial Read-Out
Dave Manson states: “This tool was designed to make life easier for the advanced shooter and re-loader by allowing precise measurement of ammunition, case, and chamber headspace. With this information, the re-loader will be able to fine-tune clearances and fits between his ammunition and chamber, with resultant improvements in accuracy and case life.” The functions of the Manson Comparator are:
1. Measure headspace of factory or reloaded ammunition
2. Quantify chamber headspace by measuring headspace of a fired case
3. Ensure minimal shoulder set-back when setting up re-loading dies
4. Compare base-to-ogive length to ensure consistent bullet-to-rifling relationship.
In addition to the Dial Indicator and Stand, the $130.00 Vertical Comparator is supplied with multiple Datum Blocks of precise length and inside diameter (.3300″/.3750″/.4000″/.4375″). MORE INFO HERE — Catalog page 20.
3. Hornady L-N-L Headspace Comparator System
Hornady’s Lock-N-Load Headspace Comparator system is easy-to-use and handy. You can get a kit with Red bushing-holder body and 5 bushings for $43.43 at Midsouth. Hornady explains: “The Lock-N-Load® Headspace Comparator… gauge measures variations in brass before and after firing or re-sizing. It allows for headspace comparison between fire-formed brass and re-sized brass.” IMPORTANT: Hornady states: “To determine the proper bushing diameter for your cartridge, simply add the neck diameter and the shoulder diameter and divide that number by two. Use the bushing closest to that number.” Hornady offers five: .330″, .350″, .375″, .400″, and .420″.
One tip — We have found the Hornady gauges may vary a little from unit to unit even with the same nominal size. If you have more than one gauge for the same cartridge, test each on your brass — you may then note a slight difference in your bump measurements. There is also an Anvil Base Kit that mounts to the opposite blade on the caliper. This provides a more stable surface for the base of your case.
4. L.E. Wilson Case Gage Depth Micrometer
If you are looking for precise “bump” measurements without having to mess with calipers and clamp-on gauge blocks, you may want to consider the L.E. Wilson Case Gage Depth Micrometer. This takes very precise, repeatable measurements, but you need to know your starting point. The manufacturer explains: “Every reloader should know exactly how much your Full Length Sizing Die is pushing back the shoulder. With the NEW Case Gage Depth Micrometer you can do just that! It has never been easier to measure you cases headspace before and after sizing. The Depth Mic allows you to slip the micrometer perfectly over the top of the Gage with your case inserted into the Gage and take a measurement. Micrometer has graduations of .001″. The Case Gage Depth Micrometer is set to a zero of .100″ on the scale at our factory. Because of differences in ‘feel’ and temperature, we include a the Gage Block for you to test Zero and to adjust if necessary.”
5. Pistol Brass Case DIY Bump Gauge
Last is a “field expedient” set-up if you do not have any of the comparator tools shown above. A sized .45 ACP case (or other suitable pistol case) can be used to measure shoulder bump. The mouth of the pistol case sits on the shoulder of your rifle cartridge brass.
Make sure the .45 ACP case is trimmed square and that it is round. We recommend you first run it through an expander, then size it, trim it and chamfer. Next, take the .45 ACP case and slip it over the neck of a fired, unsized rifle case with the primer removed. Align the two cases between the jaws of your calipers and note the length from rim to rim (See left photo below).
OK, now you have the length for a fired rifle case BEFORE sizing. Next, take a full-length sized rifle case (without primer) and do the same thing, placing the .45 ACP case over the neck of the FL-sized case (Right Photo). The difference between the two numbers is the amount of “bump” or set-back you are applying to the shoulder. Here the difference is .0015″. The amount of bump you need varies with your chamber and your load, but .0015-.002″ is a good initial setting.
T6 Aluminum Frame with Tungsten Gray Cerakote® Finish
