The LEE Hand Press Kit comes complete with: Breech Lock Hand Press, Ram Primer fittings, Powder Funnel, Case Lube, and one Breech Lock Quick Change Bushing.
The LEE Breech Lock Hand Press is a useful addition to any reloader’s tool collection. This Hand Press allows you to resize brass or seat bullets while at the range or away from your loading room. No it won’t replace your Co-Ax or Rockchucker, but this is a handy piece of gear. And it’s very affordable. Midsouth sells the LEE Breech Lock Hand Press Kit, with everything shown above, for $58.89. Or you can buy just the Hand Press by itself for $42.22 at Battlehawk Armory. That’s a great deal.
LEE Hand Press Quick-Change Die Functionality
This LEE Press includes the Breech Lock Quick-Change Die Feature, so you can instantly change dies with just a twist of the wrist. One Breech Lock Quick Change Bushing is included. The Breech Lock Hand Press is light and compact. It tips the scale at a mere 1 3/4 pounds and overall product length is 11.5″. Note: the maximum overall length cartridge the LEE Hand Press can accept is 3.650 inches.
While we don’t recommend the Hand Press for major full-length sizing chores, it does a good job seating bullets. This makes it a handy “field expedient” tool when doing load development at the range. For example you can experiment with seating depth by loading a batch of cartridges at home with the bullets deliberately seated long. Then, at the range, you can re-seat the bullets progressively shorter (in a series of rounds), until you find the optimal Cartridge OAL.
LEE’s Hand Press is also great for decapping operations. One verified buyer reports: “I mostly use it for decapping while watching TV, with a universal decapper die. Of course it is also useful for other operations. I wouldn’t love sizing large rifle cases with it, but if you’ve prepped your cases on a bigger press you could comfortably take it to the range for load development, one round at a time, working right there at the line instead of making a bunch of loads at home that you’ll have to disassemble later. It’s smaller and more lightweight than it looks[.]”
Using LEE Hand Press to Load at the Range
To learn more about using the LEE Hand Press in the field with a compact scale, read Reloading Without a Bench on GunsAmerica.com. Author Christopher Mace explains: “whether you want a better way to do load development, the capability to reload out of your ‘bugout bag’, or you’re short of space but wanting to get into reloading, the LEE Loaders and the LEE Hand Press offer you some options.”
Whidden Gunworks makes great sizing and seating dies. The Whidden full-length sizing die with neck bushing is very popular because it allows you to “tune” the neck tension by using different bushings, with larger or smaller inside diameters. In this video, John Whidden explains how to choose a the right bushing size for use with your neck-sizing and full-length sizing bushing dies.
For most applications, John suggest starting with the caliper-measured outside diameter of a loaded cartridge (with your choice of bullet), and then SUBTRACT about three thousandths. For example, if your loaded round mics at .333, then you would want to start with a 0.330 neck bushing. John notes, however, that you may want to experiment with bushings, going down a thousandth and up a thousandth. With thin In addition, as your brass ages and the necks harden, you may want to change your bushing size.
Quick Tip: Try Flipping Your Bushings
You may also want to experiment with “flipping” your neck bushings to alternate the side that first contacts the neck of the case. (One side of the bushing is usually marked with the size, while the other side is unmarked.) So try “number side up” as well as “number side down”.
Some folks believe that one side of the bushing may allow a smoother entry, and that this can enhance concentricity. Other people think they can get very slightly more or less neck tension depending on how the bushing is oriented. This is a subtle effect, but it costs nothing to experiment.
If one bushing orientation proves better you can mark the “up” side with nail polish so that you can always orient the bushing optimally. NOTE: We have confirmed that some bushings are actually made with a slight taper. In addition, bushings may get distorted slightly when the brand name and size is stamped. Therefore there IS a reason to try both orientations.
Guns & Gear is back for its 14th season. Produced by Tom Gresham, Ryan Gresham, and the Gun Talk team, Guns & Gear showcases new products in the firearms industry. Each episode features interviews with industry experts/instructors, range demonstrations, tips, and training techniques. Guns & Gear content is all FREE — you can watch over 270 videos from Guns & Gear past seasons via the Guns & Gear Archive on GunTalkTV.com.
Examples of Guns & Gear Videos from GunTalk YouTube Channel
Five Past Broadcasts We Recommend ARE:
Season 13, Episode 7: Colt Anaconda, Frankford Arsenal X-10 Progressive Press, SIG Sauer Red Dot optics
Guns & Gear broadcasts are hosted online via Guntalktv.com and the Guntalk YouTube Channel. There are now over 850 Guns & Gear videos on YouTube. The shows can also be accessed free via Amazon Fire TV, Apple TV, and Android TV channel. On cable television, Guns & Gear airs on the Sportsman Channel on Wednesdays at 2:00 PM Eastern, Thursdays at 8:30 PM and 11:30 PM ET, Fridays at 2:30 PM ET, and Mondays at 5:00 AM ET. There are also cable connections via DirectTV Ch. 605, DISH Network Ch. 395/395 HD and 9483, and AT&T U-Verse Ch. 642/1642 HD.
13 Years of Guns & Gear Bloopers
If you want some light-hearted entertainment, this week on the Premiere episode of Season 14, the crew revisits some of the most memorable bloopers, outtakes, and mistakes from the past 13 years of filming.
Want to show off some groups you’ve shot? Or keep a handy pack of mini-targets in your range kit? Then check out this unique product from stockmaker Bell & Carlson. Shoot’n Aces cards feature a 1-inch black square aiming box with a 1/2-inch inner square. These cards are normal poker-playing-card size, 3.5″ high x 2.5″ wide (89 × 64 mm). Shoot’n Aces cards come 56 to a pack. Carry a few extras in your wallet or a pack in your vehicle glove compartment and you’ll always have a precision target to shoot at the range. Cards can be stapled or taped to target stands.
Sniper Central says these cards work well as targets: “The bold square is easy to pick up with the inner white portion making a nice aiming point. The material of the cards is the same as normal playing cards and the bullets make a very nice hole when passing through.” The sharp edges of the bullet holes makes it easy to measure group sizes with precision.
Each pack of Shoot’n Aces contains 56 premium-quality target cards. If you want some, order Bell & Carlson item SA-2006. This is a set of four (4) card-packs with 56 cards per pack (224 cards total) priced at $20.00 (i.e. $5.00 per pack).
At least 19 million Americans are currently licensed/permitted to carry concealed weapons.* And with the recent U.S. Supreme Court decision in NYSRPA v. Bruen, we can expect that number to increase significantly. That landmark case stated that the Second Amendment guarantees citizens the right to bear arms outside their homes.
There are now seven (7) major business entities which provide insurance coverage and legal services for CCW holders. These providers are listed below. We suggest, BEFORE you commit to any particular policy/membership, you comparison shop at least three different options. We also recommend you read the full 3400-word GunDigest Article that examines, in detail, the coverage offered by these seven companies:
Factors to Consider When Choosing a Gun Insurance Program:
Attorney Fees and Expert Fees
The key benefit of any CCW insurance plan is coverage for attorneys fees. If you need a lawyer for a civil case or criminal defense, the fees pile up very fast. Good lawyers can charge $400-$500 per hour, and a trial can go on for many days. GunDigest explains: “If your case goes to trial you might find a bill that runs up to six figures.” You should check to see if a policy covers lawyer retainer, hourly fees, expert fees, AND potential damages.
Bail Bond Coverage
If you are involved in an incident, and an arrest is made, you want to avoid spending time in a jail cell. That’s why it’s important to have a CCW insurance plan that will quickly provide funding for bail bonds. As GunDigest notes: “bail-bond coverage is typically part of a sound concealed carry insurance policy”.
Multi-State Coverage
Gun laws vary among states, and state insurance laws vary as well. This affects the coverage an insurance program can and will provide. When choosing a policy, ask questions to determine how coverage may vary from state to state. With some programs you can purchase additional coverage for trips outside your home state. These can be time-limited for cost savings.
Policy Limits (Dollar Amounts)
When considering a CCW insurance program you need to look at the policy limits — the amount the program might pay to provide legal assistance and potentially settle a claim. You need to read the fine print here, just as you would with an automobile or home policy.
The detailed GunDigest article on CCW Insurance Coverage, notes that there are some additional factors to consider when choosing CCW Insurance:
“You’ll find there are other areas covered by some concealed carry insurance plans worth contemplating. Many of them fall within the policies themselves, however, some cost extra. In many cases, CCW policies go well beyond legal expenses and cover some other aspects you might not have considered:”
Crime Scene Clean Up
Negligent Discharge
Spouse And Family Self-Defense
Property Damage
Firearms Replacement
Work Loss Coverage
Personal Use Of Firearm (non-defensive)
* According to the NRA-ILA, the number of concealed handgun permits reached 18.66 million in 2019 – a 304% increase since 2007. And many more have been issued since 2019.
Lyman’s Auto Advance Target System is an innovative product for rimfire shooters. Shoot more, with less time wasted changing targets. The Auto Advance features a motor-driven roll of targets that can be “refreshed” with a radio remote-control. Here’s how it works — a 50-foot-long target roll is mounted in the top on the target stand. When you’re ready for a new target, push a button and a fresh target rolls into place. The radio remote-control activates a battery-powered electric motor that conveniently rolls a new target into place after the current target is shot out. The remote-control works at distances up to 200 yards. NOTE: This target system is rated for rimfire and air rifle use only — no centerfire.
There are currently four (4) target roll options: Five Bullseye Target, 11-Bull Smallbore Target, Silhouette Target, and Varmint Target. Original MSRP was over $200.00, but now the going price is much lower: $60.99 on GunZoneDeals, $64.69 on Grabagun and $100.53 on Amazon.
This helpful Lyman video shows all the features of the Auto Advance, with instructions for frame assembly, target-roll loading/removal, and use of the remote control.
Lyman states: “The new Lyman Auto-Advance Target System offers shooters the ability to change targets at up to 200 yards with the press of a button! No more walking downrange to replace targets, or waiting for cease-fires! The Auto-Advance Target System is battery-operated, so there is no need for wires and power outlets, plus it disassembles easily for transportation back and forth to the range. The Auto-Advance Target System has steel protection plates that are rated for use with all rimfire calibers. The Auto-Advance Target System comes with a roll of standard bullseye targets. Additional 50-foot target rolls are available with bullseye, animal and silhouette designs.”
Do you have a concealed carry permit, or do you plan to carry a concealed handgun in the future? Then you can benefit from Beretta’s FREE 15-page e-book, Ten Essential Tips for CCW Holders. This eBook, in handy PDF format, helps gun owners select an appropriate handgun (and holster), understand legal obligations and responsibilities, and train effectively with the firearm. This short eBook offers many useful tips to consider, in particular for gun owners who are contemplating the pros and cons of everyday carry for themselves.
As the Beretta CCW booklet says, “Carrying a concealed handgun requires a certain amount of confidence. You need to be confident in your knowledge of laws and regulations. You have to have confidence in your accuracy, and you need to trust that you can carry a gun effectively, securely and comfortably. If a gun is a burden for you to carry, you probably won’t.”
Surprising Facts About Actual Defensive Handgun Use
You may be surprised to learn when and how handguns are actually used for self-defense. Most defensive uses are at very short range and the incident only lasts a matter of seconds. You need to be prepared, and train to be proficient drawing and aiming your weapon. And remember, shooting is a last resort, when a safe retreat is not available.
55% of gunfights take place in 0-5 feet.
20% of gunfights take place in 5-10 feet.
20% of gunfights take place in 10-21 feet.
95% of gunfights take place in 0-21 feet. (Source: FBI)
The average man can cover 21 feet of ground in 1.5 seconds.
The average gunfight is over in 3-5 seconds.
3 to 4 shots are usually fired.
Most gunfights take place in low-light conditions.
On average, one shot in four strikes someone.
Here are two (2) sample pages from Beretta’s CCW eBook.
Gavin Gear of UltimateReloader.com recently tested the impressive Henderson Gen 3 (V3) Trimmer. There is a full write-up on Gavin’s website, and you can watch Gavin’s 18.7-minute video review below.
Gavin states: “I met Todd Henderson at SHOT Show and it’s clear that quality control and customer experience are extremely important to him. The Henderson Gen 3 case trimmer is built on an adjustable tri-trim 3-way cutter with different pilots to accommodate different case necks. Three way cutters trim to length and chamfer the inside and outside all at once. This trimmer has a 1700 RPM spindle and a custom DC motor made in the USA. It is made of billet aluminum and has a taper-lock cutting head and is consistent to 0.002″” at least with the same brand of brass. The collets are Brown & Sharpe style collets and are interchangeable with Forster case trimmer collets. Henderson currently offers four collets, and one is supplied with each machine.”
Gavin explains the trimming process: “I had some 6mm Dasher brass I’ve fired a few times and wanted to take down 5-10 thousandths. The Henderson trimmer works much like a milling machine. You do not need much torque because of the way the taper works.”
The Henderson Gen 3 trimmer delivered outstanding cartridge length consistency after trimming: “I was careful to ensure my trimming process was as consistent as possible. I measured the first ten cases I ever trimmed on the unit and found a standard deviation of 0.00047. The extreme spread is actually less than advertised. This trimmer is fast and easy to use and most importantly, returns consistent results.”
F-Class John Review of Henderson Gen 3 Trimmer
Our Editor F-Class John has also reviewed the Henderson Trimmer. He liked the product so much he purchased one, and he uses it regularly now to trim his .284 Win cases for F-Open competition.
John liked the precision of the Henderson trimmer and the overall design of the machine, which offers good ergonomics and very precise alignment of the cases. Cycling is smooth and positive, as you can see from the videos. Fit over the pilot was fine for John’s .284 Win brass, but he notes that other users may need to expand their case necks appropriately to fit their pilot.
Watch the video to see the Henderson trimmer in action. The dual, parallel horizontal support shafts provide precise alignment of the case as it moves inward toward the cutter blade. The Taper-Lock cutter provides a 14-degree inside chamfer and 30-degree outside chamfer. The trimming process is very consistent case after case, and the Henderson’s design captures brass shavings effectively.
The new 17th Edition of the Cartridges of the World was just released on June 21, 2022. This resource belongs in every serious gun guy’s library. This massive 704-page reference contains illustrations and load data for over 1500 cartridge types. If you shoot a wide variety of cartridges, or are a cartridge collector, this book is a “must-have” resource. The latest 17th Edition includes 30+ new cartridge types and 1500+ photos. The print version costs $32.50 at Amazon.com plus $3.99 shipping. Or you can get the print book from Amazon 3rd party sellers for $31.33 delivered. The Kindle eBook version costs $17.88.
Updated 17th Edition with Feature Articles
The 17th Edition of Cartridges of the World includes cartridge specs, plus tech articles on Cartridge identification, SAAMI guidelines, wildcatting, and new cartridge design trends. Cartridges of the World, the most complete cartridge reference guide in print, includes a full-color section with feature articles such Cartridges of the AR-15, Creedmoor Cartridge Family, .404 Jeffrey, .30 Carbine, plus “Cartridges and Cans” (suppressors).
View Free Book Sample Content
FREE STUFF for You: If you want to see what you are getting, there is a very large sample section of the previous 16th Edition available online with over 100 pages of content and dozens of photos and illustrations. To access all this FREE INFO, CLICK HERE, then click on the cover photo where it says “Look Inside”.
NOTE: This is content from the 16th Edition, but most is the same in the 17th Edition.
Cartridges of the World 17th Ed. CHAPTERS:
Chapter 1: Current American Sporting Cartridges
Chapter 2: Obsolete American Rifle Cartridges
Chapter 3: Wildcat Cartridges
Chapter 4: Proprietary Cartridges
Chapter 5: Handgun Cartridges of the World
Chapter 6: Military Rifle Cartridges of the World
Chapter 7: British Sporting Rifle Cartridges
Chapter 8: European Sporting Rifle Cartridges
Chapter 9: American Rimfire Cartridges
Chapter 10: Shotgun Shells
Chapter 11: U.S. Military Ammunition
Chapter 12: Cartridge ID by Measurement
Cartridges of the World by author Frank C. Barnes was first published in 1965. The 17th Edition is edited by W. Todd Woodard, Editor of Gun Tests magazine and author of several firearms reference books. Frank Barnes (1918-1992) began collecting information on handgun cartridges at the early age of 12, thanks to his father, a police officer. Frank Barnes was an innovative cartridge designer, who invented the original 308 x 1.5″ Barnes, predecessor of the 30BR case.
Before Frank began a law enforcement career, he was a college professor. Frank was also a pilot, and a race-car driver. Learn more about Cartridges of the World (17th Ed.) at GunDigestStore.com.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Midsouth — Powders in Stock: Hodgdon, Accurate, VV and More
⏺ Save $200 on highly-rated Sightron Scopes now through June 30, 2022
Good news for handloaders — we are starting to see more powders available at gunstores and online retailers. Right now Midsouth has 70+ powder types IN STOCK and ready to ship. Choose among Hodgdon, Accurate, Vihtavuori, Ramshot and other brands. Sorry no Varget or H4350, but there are some very good alternatives. We also recommend you check regularly with Powder Valley, which had some Varget and Alliant 15.5 TS recently. These powders (along with H4350) do sell out almost immediately.
2. Bruno’s — Open Box Nightforce Scope Sale, Save $200+
⏺ Save big bucks on high-magnification Nightforce competition scopes
Save $200+ on your next long-range competition scope. Bruno’s has slashed prices on Open Box Nightforce scopes. Get a 12-55x52mm Nightforce Competition for $2195.00. That’s $205 less than the $2400.00 price at other vendors. Or get a 12-42x56mm Nightforce for just $1325.00 — hundreds less than the original MSRP. NOTE: These are NEW scopes, but deeply discounted as “Open Box” items. These still have the full Nightforce lifetime warranty to the purchaser.
3. Midsouth — RCBS Explorer Reloading Kit, $299.99
⏺ RCBS Kit includes all vital tools — good for new hand-loaders
Good news — Midsouth has RCBS Explorer Press Tool Kits on sale for $299.99. That’s $65 off the regular price. Great for folks getting started in reloading, this kit includes the single-stage press, powder measure, priming tool, trickler, digital scale, load manual, and various accessories. Get the RCBS Explorer Kit 2 for $299.99. If you want a bigger press, Midsouth also has the Rebel Master Reloading Kit for $359.99, marked down from $489.99. This includes everything in the Explorer kit, but with the beefier Rebel press and a few more tools.
4. Palmetto SA — S&W M&P 15-22 Rifle Package, $429.99
⏺ Good, reliable rimfire AR clone for NRL22 and cross-training
This Smith & Wesson AR-style M&P15-22 provides the fun of an AR15 with the low cost of rimfire ammo. This can work well for cross-training or NRL22 matches. The S&W M&P 15-22 SPORT features a slim M-LOK handguard that easily accepts a variety of accessories without removing the handguard. The M&P15-22 SPORT comes standard with removable Magpul MBUS front and rear folding sights. This $449.99 package includes 3 magazines and a nice gun case.
⏺ Great price on versatile, well-designed gun vise
Here’s an excellent gun vise on sale for just $37.99. The versatile MTM GV-30 CaseGard Gun Vise supports rifles and shotguns for cleaning/maintenance. High and low forks allow level or angled gun placement. The rubber-padded rotating stock clamp provides a firm hold. The base has 14 different compartments for tools/solvents, plus 11 slots for jags, brushes, and screwdrivers. On the side are tabs for two cleaning rods. This GV-20 vise is made from rugged, solvent-resistant polypropylene plastic. If this sells out on GunZoneDeals, Midsouth has the GV-30 Vise for $40.38.
6. Creedmoor Sports — Sightron Scope Sale, Save $200
⏺ Save $200 on highly-rated Sightron Scopes now through June 30, 2022
If you’re looking for a great deal on a solid, competition-worthy optic, check out the Sightron Sale at Creedmoor Sports. They have a large selection of the most popular scopes in the Sightron lineup all at prices you can’t pass up. You can save $200 on the SIII 8-32x56mm and save $200 on the SIII 10-50x56mm model. Both are great choices for benchrest or F-Class Competition. Varminters should consider the S-TAC 4-20x560mm, now discounted from $529.99 to $449.99.
7. Palmetto SA — .22 LR Rimfire Ammo, $3.99-$5.99/50rd Box
⏺ Really good deals on accurate and reliable rimfire ammo
Need reliable .22 LR ammo at a great price? Palmetto State Armory has great rimfire ammo deals going right now. Leading off is Norma Tac-22 for just $3.99/box. Despite the super-low price, this is very good ammo that has shown excellent accuracy. Next, at $4.99/box, Federal Champion 40gr ammo is also an excellent deal. And for a buck per box more ($5.99/box), consider the CCI Quiet-22 45gr ammo. This 835 fps Quiet-22 cuts the volume of standard 22 LR rounds dramatically, while still cycling through semi-auto rifles and handguns. These and other .22 LR ammo types are in stock now at PSA.
8. Pyramyd Air — Crosman 1377C/PC77 Air Pistol, $64.99
⏺ Excellent, budget air pistol for training and fun shooting
Here’s a classic American air pistol for just $64.99. The Crosman 1377C/PC77 pneumatic pistol has been enjoyed by countless American shooters for decades. 10 pumps sets the pressure. This pistol is suitable for plinking, paper targets, and reactive targets. Trigger is about 4 lbs., and accuracy is very good, as you can see in the test video below:
This pistol comes with a 10.25″ barrel, blade front sight and adjustable rear sight. You can mount a pistol scope with the Crosman 459MT intermount (sold separately). This is a very ergonomic pistol, with great reliability and impressive accuracy.
9. Amazon — Universal Gun Cleaning Kit, $39.99
⏺ Great value for cleaning kit for pistols, rifles, and shotguns
This Universal Gun Cleaning Kit has just about everything you need to clean any firearm, all packed in a handy transport case. The kit includes jags, brushes, bore mops, slotted tips, and lots more. The fitted jags and slotted tips are made from solid brass and marked by caliber. The cleaning rods and accessory adapters are also made from brass. Included in this easy-to-carry kit are: 6 gun rods, 13 gun jags, 4 slotted tips, 9 gun mops, 14 bore brushes, 3 muzzle guards, 3 utility brushes, 3 accessory adapters, 4 polishing cloths, 100 cleaning patches, 2 oil bottles (empty), and even a gun cleaning mat. NOTE: For competition rifles, we recommend using high-quality ONE-PIECE cleaning rods.
10. Amazon — Large Digital Display Timer, $12.95
⏺ Use in Matches — Count-Down or Count-UP, handy big buttons
If you shoot in a discipline with time limits, or you time your firing strings during practice, having a reliable and easy-to-read timer is critical. One of our favorite timers is this very affordable Digital Display Timer with both count-up and count-down functions. It boasts an easy-to-read display and LARGE buttons making it perfect for F-Class, Palma, and other matches. This timer comes with both a built-in stand AND a strong magnet so you can position the timer conveniently.
LEE Hand Press Quick-Change Die Functionality
Quick Tip: Try Flipping Your Bushings
