For this Saturday-at-the-Movies session we offer a selection of videos featuring interesting tools and products for handloaders. If you spend much time in your reloading room, these tools can save you time and help you load better ammo in less time. Today’s feature products range from sophisticated, premium tools such as 21st Century powered neck-turning lathe, to basic add-ons such as Lee Breech Lock Bushings, which are very handy if you load a variety of cartridge types.
21st Century Powered Neck-Turning Lathe
Power is activated by the red button on the end of the blue, horizontal feed handle:
Do you neck-turn hundreds of cases annually? Then you deserve this outstanding tool. The 21st Century Innovation Powered Neck-Turning Lathe may well be quite simply the best system ever created for quickly and precisely uniforming (and reducing) the neckwall thickness of cartridge brass. We have the original manual 21st Century neck-turning lathe, and can attest that it works great. With this powered system you can turn necks faster and more efficiently, with less effort. This is like going from a stick shift to an automatic transmission. The cases feed very smoothly and the results are beautiful. Note: The videos show the version as first marketed by 21st Century Shooting, which now operates as 21st Century Innovation.
The Powered Neck-Turning lathe is a modular system. Swing the bar from right to left to feed the case. The power head (with case holder) glides on stainless steel rails for smooth movement. This allows very precise feed rate. Power is supplied via a button that is built into the end of the feed handle. Push the red button to make the case spin. It’s as simple as that.
Hornady OAL Tool and Hornady Bullet Comparator
Gun Tech Steve Ostrem explains how to properly use Hornady’s Overall Length Gauge to determine length-to-land precisely. The OAL Gauge uses a “Modified Case” that threads onto the tool and holds a bullet. Push on the back of the gauge until you feel the bullet just touch the rifling. (We do this gently at first, tapping the rod a couple time to ensure the bullet is aligned correctly). Once you’ve got the length, then use the tool with a comparator on your calipers to get the length-to-lands. NOTE: We recommend taking the measurement 3-4 times in a row to get a reliable number. With a little practice your should be able to get repeatable measurements within .0015″.
Henderson Power Case Trimming/Chamfering Machine Test
F-Class John tests some of the finest reloading and shooting equipment you can buy. Recently he added the impressive Henderson Gen 3 Powered Trimmer to his inventory of tools. John is now a Henderson fan. He likes the speed, precision, and repeatability of the $779.00 Henderson machine, which trims-to-length and chamfers the case mouth all in one pass. Unlike some other trimming tools, the Henderson indexes off the overall case length NOT the shoulder. John found this worked just fine for his .284 Winchester brass, which has all been full-length sized prior to trimming.
Watch the video to see the Henderson trimmer in action. The dual, parallel horizontal support shafts provide precise alignment of the case as it moves inward toward the cutter blade. The Taper-Lock cutter provides a 14-degree inside chamfer and 30-degree outside chamfer. The trimming process is very consistent case after case, and the Henderson’s design captures brass shavings effectively.
This related video shows a comparison with the popular Giraud Powder Trimer
As noted in this comparison, John liked the precision of the Henderson trimmer and the overall design of the machine, which offers good ergonomics and very precise alignment of the cases. Cycling is smooth and positive, as you can see from the videos. The Giraud is also an excellent machine for bulk trimming/chamfering but the Henderson has some advantages.
Concentricity Checking with Accuracy One Gauge
Every serious hand-loader needs a quality concentricity gauge. The Accuracy One Concentricity Gauge boasts a smart design that delivers precise, repeatable results. We like the unit’s easy adjustability and its ability to work in a variety of configurations. The Accuracy One Gauge measures internal and external neck runout of cartridge cases as well as seated bullet runout. It can also measure the runout of the ogive, bearing surface, and boat-tail of individual bullets. And it can even measure your primer pocket runout.
Lee Die Lock Rings and Spline Drive Breech Lock Bushings
In this recent video Gavin Gear reviews three types of die accessories from LEE. These work for virtually all standard dies, not just LEE-brand reloading dies. The new LEE basic silver-finish die lock rings now feature splines for enhanced grip and compatibility with LEE’s new die lock ring wrench (photo right). They still boast a rubber 0-Ring that helps “float” the die for improved concentricity. Gavin also reviews Lee’s Spline Drive Breech Lock Bushings for use with presses fitted with LEE’s Breech Lock system. These Breech Lock bushings allow rapid change-out of dies without modifying the setting. The colorful new bushings feature splines on top that work with the new Lee Lock ring wrench shown above. In addition, the Breech Lock Bushings have a clamp to preserve die depth setting.
Tools Galore — Affordable Tools and Accessories for Reloaders
This detailed 15-minute video from the Bolt Action Reloading YouTube Channels, features a variety of lower-cost products/tool that help with key reloading tasks. The video looks at hand priming tools, case prep tools, Lyman stepped loading blocks, powder tricklers, expander mandrels, powder trickler, long-tube funnels and more! If you are getting started in hand-loading, this is a very helpful video to watch. It covers a lot of ground, illustrating options for tool types.
This Lyman case prep tool is one of many products reviewed in this 15-minute video.
The NRA has released the final 2022 National Rifle and Pistol Match schedule. The 2022 NRA National Rifle and Pistol Championships will be held July 8 through August 7, 2022 at Camp Atterbury, Indiana. A National Match Calendar for next summer has been released, which we publish below.
The 2022 NRA Rifle and Pistol Championships at Camp Atterbury will start with OTC (Over the Course) High Power Rifle competition. This is unlike 2021 when the Nationals at Atterbury started with Smallbore events. In 2022 the Smallbore 3-position event runs from July 25 through July 29. Some competitors have lamented that this overlaps with the Long Range Championship (July 23-28), so shooters will have to choose one or the other. The 1-Mile Extreme Long Range Challenge match returns to the National Matches Calendar after being dropped in 2021.
High Power OTC Events and Championship: 8-14 July, 2022
Precision Pistol Championships: 17-23 July, 2022
High Power Mid-Range Championship: 16-21 July, 2022
High Power Long Range Championship: 23-28 July, 2022
Smallbore 3-Position Nationals: 25-29 July, 2022
Smallbore Prone Nationals: 30 July – 7 August, 2022
Extreme Long Range Challenge: 5-7 August, 2022
The 2022 NRA High Power Across the Course, Mid-Range, and Long Range Championships will be fired on the ranges of Camp Atterbury. Matches will begin on July 8 and run through August 7. This year the NRA revives the Extreme Long Range Challenge, which will run August 5-7. All registrations will be handled through the NRA Competition Portal.
The new covered range at Camp Atterbury was a big hit in 2021 during the Precision Pistol and Smallbore Rifle Championships. This was built with the help of the State of Indiana, Indiana National Guard, the NRA, and the Indiana State Rifle and Pistol Association.
Here’s a product that should please handloaders who wet-tumble their brass with stainless media, or use ultrasonic cleaning machines to clean cartridge brass (and gun parts). Employing forced hot air circulation, the new Lyman Cyclone Case Dryer will dry a large quantity of brass in under two hours. Internal racks provide five drying levels. Now available for under $60.00 on Amazon, the Cyclone Case Dryer is a very affordable and effective addition to an ultrasonic or rotary-tumbler cleaning system.
The Lyman Cyclone Case Dryer works fast. No need to wait overnight (or longer) to air-dry your brass. Lyman states that “The forced heated air circulation of the Cyclone will dry your brass inside and out within an hour or two, with no unsightly water spots.” The handy individual trays keep different types of brass separate. The dryer can also be used for gun parts that have been ultrasonically cleaned.
Lyman Cyclone Case Dryer Features:
• Holds up to 1000 .223 Rem cases or 2000 9x19mm Luger cases
• Works with cartridge brass cases or gun parts
• Fast drying time — Typically 1 to 2 hours
• Timer control can be set up to 3 hours
• Durable ABS trays with recessed handles
Watch How Cyclone Case Dryer Functions with both Cartridge Brass and Gun Parts
Cyclone Case Dryer 115V (Part #7631560) MSRP: $86.25
Cyclone Case Dryer 220V (Part #7631561) MSRP: $86.25
There’s a good episode of Gun Talk Radio this Sunday, 2/27/2022. This week’s lead guest is respected author and former U.S. Army sniper instructor Ryan Cleckner. Host Tom Gresham and Cleckner discuss hunting, long range shooting, and tactical training. Ryan Cleckner is the author of the best-selling Long Range Shooting Handbook.
Effective Rifle Training with Ryan Cleckner
Along with his written work, Ryan Cleckner has created many good shooting videos for the NSSF, such as his excellent Understanding MOA Video. He also produces content for GunUniversity.com. Ryan is noted for his ability to explain complex topics in an easy-to-comprehend manner. This video below, covering the fundamentals of shooting, has been viewed over 2.9 million times. It’s worth watching, particularly for guys getting started in PRS/practical competitions.
In this video, Ryan Cleckner reviews proper technique for rifle shooters. A stable platform, sight alignment, sight picture, and trigger control are key fundamentals to shooting properly.
Tip on Viewing Your Reticle:
Cleckner: “Sometimes it can be difficult to focus between the target and the reticle, even with the parallax adjusted properly. I recommend you focus only on the reticle. Just like the front sight on a rifle or a handgun, that reticle is what you can control, and it’s what matters. Focus on a crisp, clear reticle, in a stable platform, and all that’s left is trigger control.”
Tip on Trigger Control:
Cleckner: “Trigger control is pretty straightforward, as long as you think about it as a continuous process, and not just one thing that happens. I like to think about it as drawing a line in the dirt. I like to think about this constant pressure that I’m adding as I draw this line straight back, and then… continuing to draw that line even as the rifle goes off. That’s the good follow-through you’ll need.”
Long Range Shooting Handbook — A Good Resource
Ryan Cleckner’s Long Range Shooting Handbook is designed as an introduction to important fundamental concepts such as MOA vs. Mils, External Ballistics, and Environmental Effects. It also include advice on shooting positions, and gun handling. Included are personal tips and advice based on Cleckner’s years of experience as a sniper instructor and special operations sniper.
The Long Range Shooting Handbook is divided into three main categories: What It Is/How It Works, Fundamentals, and How to Use It. “What It Is/How It Works” covers equipment, terminology, and basic principles. “Fundamentals” covers the theory of long range shooting. “How to Use It” gives practical advice on implementing what you’ve learned, so you can progress as a skilled, long range shooter. You can view Sample Chapters from Ryan’s Book on Amazon.com.
Gun Talk Radio — Podcast Archive
If you miss the live show broadcast on Sunday, past broadcasts can be heard online via the GUNTALK PODCAST Site and Apple iTunes. The Gun Talk Podcast Archive has hundreds of past shows you can access via the internet. Here’s an informative, recent podcast relating to optics purchasing and scope installation.
Gun Talk Podcast from 2/20/2022 — How Much to Pay for Optics
All Gun Talk shows are also archived as podcasts for download or online listening. Gun Talk is also available on YouTube, Roku, Apple TV, Amazon Fire TV, and GunTalk.com.
Do you know what the inside of a rifle chamber (and throat zone) really looks like? Do you understand the concept of headspace and why it’s important? If not, you should read the Brownells GunTech article Gauging Success — Minimum Headspace and Maximum COL. This article explains the basics of headspace and shows how to measure headspace (and length to lands) in your barrels with precision. The article also explains how to adjust your full-length sizing dies to “bump the shoulder” as needed.
Why is headspace important? The article explains: “Controlling headspace and setting proper C.O.L. also represent improved safety and reduced cost of handloading. Excessive headspace can cause case head separation and gases in excess of 60,000 PSI escaping from a rifle’s chamber. Too little headspace can result in a chamber forced bullet crimp and a bullet that becomes an obstruction more than a properly secured projectile. Excessive C.O.L. can result in a rifling-bound bullet, a condition that could result in spikes of excessive pressure.” [Editor’s NOTE: It is common for competitive benchrest shooters to seat bullets into the rifling. This can be done safely if you reduce your loads accordingly. With some bullets we often see best accuracy .010″ (or more) into the lands. However, this can generate more pressure than the same bullet seated .010″ away from initial lands contact. As with all reloading, start low and work up gradually.]
How is headspace specified? Most cartridges used within the United States are defined within ANSI/SAAMI Z299.3-4. Brownells explains: “In the case of the .243 Winchester, as an example, there are pressure specifications, cartridge drawings and, as pictured above, chamber drawings. Armed with a chamber drawing, each manufacturer producing a firearm for the .243 Winchester knows the proper standard dimension to cut chambers and set headspace. Notice there are two headspace reference dimensions for the chamber. The upper is a place in the chamber where the shoulder is .400″ in diameter; the “datum” or “basic” line. The lower is the 1.630″~1.640″ minimum – maximum dimension from the breech face (bolt face) to that point in the chamber that measures .400″.”
The actual headspace of any firearm is the distance from the breech face to the point in the chamber that is intended to prevent forward motion of a cartridge.
Finding Cartridge Length to Lands with OAL Gauge
Using a comparator on a set of calipers, you can quickly determine cartridge base-to-ogive length. This is the measurement from the base of the case to the forward-most full diameter section of the bullet, which is for convenience called the ogive. (Technically, the “ogive” is the full curve from bullet tip back to full-diameter ring). Shown here, that ogive is 0.243″ diameter.
The next step is using a modified (threaded) case with a Hornady OAL tool to determine Length-to-Lands (LTL) in your rifle’s chamber. During this measurement process, the modified case, with a bullet in its neck, is inserted in the chamber. Go slow, take your time. Here are 5 tips that will help you get repeatable and reliable LTL measurements:
1. Start with a clean chamber and clean barrel throat.
2. Make sure the modified case is fully screwed down and seated on the OAL Gauge. It can sometimes unscrew a bit during repeated measurements.
3. Insert the modified case slowly and gently, but ensure the shoulder of the modified case is fully seated on the end of the chamber.
4. Push the gray plastic rod GENTLY. It is common for the bullet to be tilted a bit. You want to allow the bullet to self-center in the throat BEFORE you apply much pressure. Then tap a couple times and push until you feel resistance. Do NOT push too hard — that will jam the bullet in the lands.
5. Repeat the measurement at least 3 more times. If you follow our instructions, you should, typically, get a repeatable measurement, within 0.0015″ or so, 3 out of 4 times.
Most of us own a .223 Rem rifle. Now, thanks to our friends at Rifleshooter.com we can assess exactly how velocity changes with barrel length for this popular cartridge.
Rifleshooter.com performed an interesting test, cutting the barrel of a .223 Rem rifle from 26″ all the way down to 16.5″. The cuts were made in one-inch intervals with a rotary saw. At each cut length, velocity was measured with a Magnetospeed chronograph. To make the test even more interesting, four different types of .223 Rem/5.56 ammo were chron’d at each barrel length. The Rifleshooter.com team that conducts these tests has a full-service gun shop, 782 Custom Gunworks — visit 782guns.com.
Test Barrel Lost 25.34 FPS Per Inch (.223 Rem Chambering)
How much velocity do you think was lost, on average, for each 1″ reduction in barrel length? The answer may surprise you. The average speed loss of the four types of .223/5.56 ammo, with a 9.5″ shortening of barrel length, was 240.75 fps total (from start to finish). That works out to an average loss of 25.34 fps per inch.
5.56/.223 Barrel Cut-Down Speed Test 26″ to 16.5″
Start FPS at 26″
End FPS at 16.5″
Total Loss
Average Loss Per Inch
UMC .223 55gr
3182*
2968
214
22.5 FPS
Federal M193 55gr
3431
3187
244
25.7 FPS
Win m855 62gr
3280
2992
288
30.3 FPS
Blk Hills .223 68gr
2849
2632
217
22.8 FPS
*There may have been an error. The 25″ velocity was higher at 3221 fps.
Rifleshooter.com observed: “Cutting the barrel from 26″ to 16.5″ resulted in a velocity reduction of 214 ft/sec with the UMC 223 55-grain cartridge, 244 ft/sec with the Federal M-193 cartridge, 288 ft/sec with the Winchester M855 cartridge and 217 ft/sec with the Back Hills 223 68-grain match cartridge.”
How the Test Was Done
The testers described their procedure as follows: “Ballistic data was gathered using a Magnetospeed barrel-mounted ballistic chronograph. At each barrel length, the rifle was fired from a front rest with rear bags, with five rounds of each type of ammunition. Average velocity and standard deviation were logged for each round. Once data was gathered for each cartridge at a given barrel length, the rifle was cleared and the bolt was removed. The barrel was cut off using a cold saw. The test protocol was repeated for the next length. Temperature was 45.7° F.”
See More Barrel Cut-Down Tests on Rifleshooter.com
Rifleshooter.com has performed barrel cut-down tests for many other calibers/chamberings including 6mm Creedmoor, .308 Winchester, and .338 Lapua Magnum. See these test results at Rifleshooter.com.
Much Different Results with 6mmBR and a Longer Barrel
The results from Rifleshooter.com’s .223/5.56 test are quite different than the results we recorded some years ago with a barrel chambered for the 6mmBR cartridge. When we cut our 6mmBR barrel down from 33″ to 28″ we only lost about 8 FPS per inch. Obviously this is a different cartridge type, but also our 6mmBR barrel end length was longer than Rifleshooter.com’s .223 Rem start length. Velocity loss may be more extreme with shorter barrel lengths. And, of course, different cartridge types and powder/bullet combinations will yield different results.
The Civilian Marksmanship Program (CMP) has issued an ammunition safety advisory to all users of M1 Garands, M1903s, and M1903A3 rifles. Ammunition that is loaded beyond 50,000 Copper Units of Pressure (CUP) and using bullets weighing more than 172 grains should be limited to modern rifles, and NOT USED in old military rifles aged 70+ years.
After this warning was issued by the CMP, the California Rifle and Pistol Association (CRPA) provided further safety recommendations for owners or older firearms:
CRPA Ammunition and Older Firearms Guidelines
Many of us have either purchased or inherited firearms in excess of 25 years of age. The issue … noted as an example by the Civilian Marksmanship Program in regards to certain ammunition leads as they apply to the M1 Garand is not isolated to that particular firearm. The CRPA… has seen similar issues exposed with other [older] firearms when using modern loads. We strongly advise you to check with the manufacturer for recommended load limitations before purchasing modern ammunition for an older firearm.
CRPA also recommends these safety procedures:
— Have a gunsmith check your older firearm for safety prior to using it.
— Take a reloading class to help develop a safe load for your older firearm.
— Inspect older ammunition for defects such as a green patina or rust build up on the cases or crystallization on the projectiles. If defects are observed, the CRPA suggests disassembling the ammo into components for proper recycling and disposal.
Storage of Ammo for Older Rifles
The CRPA also cautioned that you should be cautious about older ammo that may be decades old, including old milsurp ammunition. The CRPA advises:
1. Store ammunition in a cool, dry, location where little temperature fluctuation occurs.
2. If storing ammunition in an air/watertight ammo can, utilize water absorbent silica packs and place packs in the can with the ammunition.
3. Conduct periodic checks every 12-24 months and replace the silica packs as needed.
Blaser Group will soon be offering a rare selection of Sauer rifles — the J.P. Sauer and Sohn’s 270th Anniversary Collection of rifles. Only 10 sets of this special limited-edition collection were made and only one set is currently available for sale here in the United States. The set includes four rifles: a Sauer 100, Sauer 101, and Sauer 404 all chambered in .270 caliber, along with a Sauer 303 in .308 caliber. Designed to be beautiful, accurate, and museum-grade in appearance, these rifles feature stunning wood stocks (Grade 5 in the Sauer 100 and Grade 7 in the S101, S303 and S404). These Limited Edition rifles boast the most modern materials and technology available, with Sauer’s 270th anniversary logo in black and gold on the custom grip cap.
“These elegant and accurate Sauer rifles represent 270 years of craftsmanship from Germany’s oldest hunting rifle manufacturer, and they are rare with only 10 sets made for the entire world,” said Jason Evans, CEO of Blaser Group. “We are now offering Set Number Three for sale here in the United States.”
Here’s good news for 30BR shooters. Paul Parosky, maker of the excellent PRP Custom Bullets, is now offering 30BR neck-turned brass. This can save you considerable time and effort forming 30BR cases from Lapua 6mmBR brass. And the neck-turning is superb, again representing time save (and no tools to buy). You will soon be able to order this 30BR brass from Bruno Shooters Supply. If you communicate with Amy at Bruno’s, Paul may be able to neck-turn to your specific thickness. Paul notes: “Here are necks turned for a 0.330 neck. I’ll try my best to accommodate anyone’s neck dimensions as they wish. Just message Amy Bruno Parosky (at Bruno’s) for details.”
About this Neck-Turning set-up — Paul Parosky notes: “For neck-turning I’m using an old drill press that has been re-worked. The cutter and spindle are all indicated before neck turning to ensure no runout. The RPM is around 520. The lube I use is a mixture of royal and mystery oil.”
Why the 30 BR Dominates 100/200 Benchrest for Score Competition
The 30BR, along with some wildcat variants, remains the dominant cartridge in short-range (100/200) benchrest-for-score competition. The 30BR’s .308″-diameter bullets are larger than the 6mm bullets used by the 6PPC (which rules group BR competition). The bigger 30-Cal diameter has an advantage in touching scoring rings. In addition, the 30BR is also relatively easy to tune, and barrel life is considerably better than with smaller-caliber benchrest cartridges. For more information, see our AccurateShooter 30BR Cartridge Guide.
Cases are Expanded, Then Neck-Turned
To produce his 30BR brass, Parosky first uses a series of expander mandrels. Then he neck-turns with power using a converted drill press. Paul tells us: “This is done the old school way, I use three different tapered expander mandrels, then neck-turn it to the proper neck chamber, then run them up through a FL expander mandrel to ensure necks are straight. Then I clean all the cases.”
Paul Parosky Can Also Neck-Turn 6PPC Brass
Paul Parosky also expands and neck-turns 6PPC cases that are made from parent Lapua .220 Russian cartridge brass. Here, illustrating his 6PPC neck-turning operation, is a Paul Parosky post on the USA Benchrest & Extreme Precision Shooters Facebook page.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Midsouth — Multiple Popular Powders in Stock
⏺ Good powders — Accurate, Hodgdon, Ramshot, IMR, & Vihtavuori in stock
Good news for handloaders — Midsouth has received significant quantities of popular reloading powders, including LT30, LT32, H322, H390, H50BMG, Ramshot TAC, VV N133, VV N320, and more. CLICK HERE to all propellants in stock. N133 is a top powder for the 6 PPC, LT30 and LT32 are top choices for short-range score cartridges, VV N320 is our favorite powder for .45 ACP, and Ramshot TAC is a great choice for .223 Rem and varmint loads. Head over to Midsouth today to see if there’s something you need.
⏺ Nice versatile rifle for hunting, target shooting, and tactical matches
Sportsman’s Warehouse is running a President’s Day Sale with significant savings on guns, optics, and ammo. Among the best gun deals are Bergara B-14 HMR rifles. Get a Bergara B-14 HMR in 6.5 Creedmoor, .308 Win, or .300 Win Mag for $799.99. That’s $150.00 off the regular price. Other Bergara Models are on sale as well, including the B-14 HMR Wilderness HMR in .300 PRC (26″ bbl) for $949.99. Act soon, this sale ends at 11:59 pm on 2/21/2022.
⏺ Cool ported pistol for rimfire games — accurate with great ergonomics
For .22 LR gun games, such as Rimfire Challenge matches, this Walther P22 is a good choice. The ported P22 combines low recoil/minimal muzzle flip with best-in-class ergonomics. This P22 pistol offers interchangeable backstraps, plus ambidextrous magazine release and slide safety. With its compensated (ported) barrel this gun delivers fast follow-up shots. A rare feature for a rimfire, the P22 is covered by the Walther Lifetime Limited Warranty. The P22 has a 5″ barrel and weighs 16 ounces with empty magazine. NOTE: Supply is limited.
4. Palmetto SA — Vortex 1-8x24mm Scope + Mount, $299.99
⏺ Smart cantilever set-up for AR rifles, save $200.00 with Code “STRIKE”
If you are looking for an affordable turn-key scope solution for your AR-platform rifle, check out this Vortex 1-8x24mm Strike Eagle GEN2 Scope + Mount Combo System. This combo includes a riflescope PLUS a Vortex cantilevered scope mount that positions the optic in the right position on a AR15 or AR10 rifle. You can see how the system works on an AR15 above. AR owners have been very happy with this combination. The Strike Eagle offers a true 8X zoom ratio with an illuminated AR-BDC3 Reticle optimized for ARs. Listed retail price is $499.99 but you save $200.00 with CODE “STRIKE”. That lowers your net cost to $299.99 for scope and mount.
5. MidwayUSA — Hoppes Gun Vise and Cleaning Kit, $24.86
⏺ Good basic gun vise at great price with bonus cleaning kit
The Hoppe’s Gun Vise is a good basic support for working on your firearms. And right now its offered for a crazy-low $25.86 sale price. Clamping brackets in the front and rear hold your rifle or shotgun securely without scratching. The vise is made out of a durable, chemical resistant polymer and has multiple compartments for cleaning chemicals, tools, and accessories. Included with this vise is a 12-piece Cleaning Kit for rifles, pistols, and shotguns. This gun vise has multiple compartments for tools and adjustable feet.
6. Amazon — BOG Deathgrip Aluminum Tripod, $159.00
⏺ Versatile tripod mounts quickly, securely — use for PRS/NRL or hunting.
This is a great tripod for long-range hunters and PRS/NRL competitors. The clamp-type head quickly secures to your rifle’s forearm for a secure shooting solution. The BOG Deathgrip Aluminum Tripod is on sale now on Amazon for $159.00. If weight is critical, there is also a lighter BOG carbon fiber tripod for $223.96 at Grafs.com. For the extra $65 (Graf’s price) you save a pound in total weight (7.5 lbs for carbon vs. 8.5 lbs for aluminum). This aluminum version is the top-rated hunting tripod on Amazon.
7. Natchez — CCI Blazer 9mm Ammo, $16.99/50 or $17.49/50
⏺ Quality 9mm pistol ammo at ultra-attractive prices
Do you carry a 9mm or use one for IDPA matches? Then check out this deal. Right now Natchez has CCI Blazer 9mm Luger (9x19mm) ammo on sale — both brass-cased and aluminum-cased. If you reload, pay a few bucks more for the brass-cased Blazer 9mm ammo ($17.49/50). If you don’t reload for 9mm, then shoot the aluminum-cased Blazer variety at just $14.99 for 50 rounds. Both Blazer types work fine — we’ve shot hundreds of rounds of the stuff in Glocks, SIGS, Rugers, and HKs with no issues whatsoever. Grab this bargain — the same ammo was selling for $28+ a few months ago.
⏺ Reliable, affordable, compact scale for reloaders
Right now this Frankford Arsenal DS-750 digital scale is 36% off at Amazon. This is a handy, precise little scale that is good for loading at the range, or for weight-sorting components. The DS-750 offer +/- 0.1 grain accuracy and weighs up to 750 grains. One nice feature is auto-shutoff after 60 seconds of inactivity. That saves on battery life. This won’t replace a premium scale, but it can serve many duties for reloaders. The scale measures in grains, grams, carats, and ounces and runs on 2 AAA batteries.
⏺ Handsome wood chest is great for holding small tools
This Wood Tool Chest makes a great addition to your reloading room. The eight (8) drawers can hold the many small tools and accessories used for hand-loading, such as bushings, shims, uniforming tools, mandrels, neck-turners and more. A deeper top compartment (under the lid) holds wrenches and other larger tools. The price is just $84.99 at Harbor Freight. A lockable sliding wood panel fits in place to cover the drawers when not in use. This locking panel also secures the drawers during transport.
10. Amazon — Jialitte Scope Bubble Level, $10.99
⏺ Great price for handy product every rifle shooter can use
All serious rifle shooters need a scope level. This nicely designed Jialitte Scope Bubble Level features a 30mm milled inside diameter, plus an inner insert ring so it will also fit 1″-diameter main tubes — that dual-diameter versatility is a nice feature. We also like the way the unit is nicely radiused, and has a low profile in the middle. Price is just $10.99 with free shipping. User reviews have been very positive. You could easily pay $35.00 or more for a 30mm scope level.
BONUS — RCBS Reloading Sweepstakes
Now through February 28, 2022 (2/28/22), you’ll have a chance to RCBS Reloading gear prizes worth $1918.97 (combined total). The various RCBS prizes include: RCBS MatchMaster Digital Powder Scale & Dispenser, RCBS Rebel Master Single Stage Press Kit, RCBS Case Prep Kit, RCBS Rotary Case Tumbler. CLICK HERE for entry info. No purchase necessary to enter contest.
In this recent video Gavin Gear reviews three types of die accessories from LEE. These work for virtually all standard dies, not just LEE-brand reloading dies. The new LEE basic silver-finish die lock rings now feature splines for enhanced grip and compatibility with LEE’s new die lock ring wrench (photo right). They still boast a rubber 0-Ring that helps “float” the die for improved concentricity. Gavin also reviews Lee’s Spline Drive Breech Lock Bushings for use with presses fitted with LEE’s Breech Lock system. These Breech Lock bushings allow rapid change-out of dies without modifying the setting. The colorful new bushings feature splines on top that work with the new Lee Lock ring wrench shown above. In addition, the Breech Lock Bushings have a clamp to preserve die depth setting.
Finding Cartridge Length to Lands with OAL Gauge
