Take a look at that unusual target below. We bet you’ve never seen one of these before. It’s a 50-Yard Sighting Target for the M1 Garand (and other .30-06 Springfield vintage military rifles). It’s designed to allow a rifleman to confirm his zeros for multiple yardages all the way out to 1000 yards. But importantly, he can establish those zeros at a very “short” shooting facility, since the target is positioned at a mere 50 yards.
Here’s how it works. The target is placed at fifty (50) yards. You start at the bottom, aiming at the black circle. Then check your come-up table and work your way up, clicking step-by-step to the various horizontal lines set for 200, 300, 500, 600 and 1000 yards. This is NOT “spray and pray” — you need to have a pretty good idea of the clicks you need, based on your ammo’s ballistics. This target is calibrated for the U.S. Military M72 Ball Ammo. The targets are available from Champion’s Choice ($0.75 each) or from Creedmoor Sports (12 for $5.95).
Kevin Thomas used this target to get zeroed for a D-Day Anniversary Match at the Talladega Marksmanship Park a few seasons back. Kevin used the target for both his M1 Garand as well as his M1903A1 Springfield, both chambered for the .30-06 Springfield cartridge.
Zeroing at a Short Distance — How to Use the 50-Yard Sighting Target, by Kevin Thomas
As part of my preparation for the Garand Match at the CMP’s Talladega Marksmanship Park, I needed to zero my new M1 Garand, but I was crunched for time. I didn’t have time to get to my normal range and confirm zeros at actual yardages. But a 50-yard zero target came to the rescue. Made for M1s using the M72 National Match ammo, the target allows the shooter to establish fairly good zeros at 200, 300, 500, 600 and 1,000 yards if you’ve got access to a 50-yard range.
I have no idea when these 50-yard Sighting Targets were first developed, but they’ve been around for at least as long as I’ve been involved in this game (longer than I care to admit). It consists of a tall target, with a smallish black bullseye located at the bottom center. The bullseye is an aiming point only. Extending through the top of the target is a vertical line that runs directly up the center, to nearly the top of the paper. Across this, there are intersecting horizontal lines that are marked 200, 300, 500, 600 and 1,000.
The target was designed for the M1 Garand rifle using then-issued M72 National Match ammunition. This ammo launched a 173gr FMJBT bullet at approximately 2,640 FPS. It was a good load in its day, supersonic out to the 1,000-yard line. While that ammo is fairly scarce these days, this isn’t a problem for the handloader. My standard match load for the M1 Garand utilizes the 175gr Lapua Scenar HPBT, and delivers remarkably similar ballistic performance. Thus my normal Garand load translates nicely to this 50-yard target. Yes, this is by design. No point in reinventing the wheel when Lake City has already established what works!
In use, the shooter sets the target up at a measured 50 yards, and (this is critical) checks the vertical line with a plumb bob or a carpenter’s level, to ensure that it is absolutely vertical. Once the target is set, the rifle is fired and the group noted. From there, it is a simple matter of zeroing it normally to bring the groups into alignment with the vertical line, at the elevation needed for a particular range. Once your group is hammering the intersection of the vertical line and the horizontal line marked “200”, you have established your 200-yard zero for that rifle. Record the number of clicks, and you’re good to go. Raise the impacts up to coincide with the line marked “300” and you now have a 300-yard zero as well. And so on, right up the target. Record those settings in your data book, and you’re ready to go to the range at the full distances. If done carefully, you may be in the X-Ring, but at the very least, you’ll be well-centered and ready to get some hard dope recorded for future shoots.
The same target can also be used with an M14/M1A, at least at the shorter distances. The ballistics of the M118 and the current M118LR are similar enough that this will get you on target at the full distances, probably requiring just a half MOA or so change from the 50 yard zero you recorded. Same bullets, moving at a slightly more sedate 2,550 fps, you’ll be in the ballpark at least.
Barney M. Auston of Tulsa, OK with rifle he built to break NBRSA record and win $250 cash award from Sierra Bullets. (From cover of Precision Shooting magazine. May 1956).
Way back in 1955 Sierra Bullets offered a $1000 prize for anyone setting a new Aggregate benchrest record with a 6mm (or larger) bullet. At the time the .222 Remington ruled the roost, and Sierra wanted to promote the larger caliber. (NOTE: That was serious money in 1955 — the equivalent of $10,187 in current dollars corrected for inflation). Sierra also offered a $250.00 prize for a record-breaking performance with any size caliber (including the .22s). Here is the story of how a Tulsa shooter claimed the $250.00 award with a world-record-setting Aggregate involving 10-shot groups at 100 and 200 yards.
Barney Auston’s record-setting rifle was built on an FN Mauser action with double set trigger, with a Hart stainless steel barrel, 30″ x 1 1/8″, chambered for the .222 Remington cartridge. The stock, made by Auston, has a hydraulic bedder as made by L. F. Landwehr of Jefferson City, MO. The scope is a 24X, 2″ inch Unertl. Mr. Auston shot 50gr bullets, custom made by W. M. Brown of Augusta, Ohio, with .705″ Sierra cups and soft swedged. His powder charge was 21 grains of 4198. The rifle rests, both front and rear, were also made by Auston.
Record-Setting Performance
On August 20, 1955, shooting at night in a registered shoot on the John Zink range near Tulsa, Oklahoma, Barney M. Auston of Tulsa broke the existing National Match Course aggregate record. As the first person to do that in 1955, Auston won the Sierra Bullets $250 cash award. Here is the original Sierra Bullets prize offer from 1955:
10-Shot Groups at 100 and 200
Mr. Auston’s winning Aggregate for the National Match Course (five 10-shot groups at 100 yards and five 10-shot groups at 200 yards) was .4512 MOA. He also broke the 200-yard aggregate with an average of .4624 MOA, beating the .4801 match MOA record set by L.E. Wilson only a month earlier.
Barney Auston was a custom rifle maker in Tulsa who fabricated the rifles used by many of the leading benchrest competitors in the Mid-Continent and Guild Coast Regions. Auston was himself one of the top benchrest shooters in those regions during his shooting career.
Editor’s Note: Both of Mr. Auston’s records were broken before the end of the 1955 shooting season, but Auston was the first to win the Sierra Prize. Interestingly, in setting his record, Austin broke the existing Agg record by L.E. Wilson of Cashmere, Washington — yes, the same L.E. Wilson that now makes dies.
Note the owner’s name, “S. Limbourne” was engraved on the bolt release (and trigger guard, see below).
Competition rifles don’t need to be beautiful, as long as they shoot. But who doesn’t like a spectacular figured-wood stock, particularly when it is combined with a superb custom action and a tack-driving barrel. This custom .284 Winchester F-Class Open division rig was crafted by gunsmith Thomas “Speedy” Gonzalez for competitive shooter Scott Limbourne. The handsome Bacote wood stock comes from Cerus Rifleworks, while the action is a polished Borden RBRP BRMXD. Two Brux 1:9″-twist barrels were chambered for the project, both finished at 32″. The stock is also fitted with a R.A.D. Recoil System. This rig has top-of-the-line hardware all around.
Action: Borden BRMXD – Polished
Rail: 20 MOA Polished
Chambering: .284 Winchester
Trigger: Jewell BR – Blueprinted
Barrel: (2x) Brux 32″ 1:9″ Twist
Stock: Cerus F-Open in Exhibition Grade Bacote
Recoil System: R.A.D. System
Extras: Carbon Fiber Tunnel Plate, Custom Engraving Work on Action, Trigger Guard, and Bolt Release.
You’ll find other impressive rigs on Speedy’s Facebook Page. If you’d like a superb custom rifle like this, call Thomas “Speedy” Gonzalez at 972-672-6630, or send email to: speedy.godzilla [at] msn.com.
The Lee Hand Press Kit comes complete with: Breech Lock Hand Press, Ram Primer fittings, Powder Funnel, Case Lube, and one Breech Lock Quick Change Bushing.
The Lee Breech Lock Hand Press is a useful addition to any reloader’s tool collection. This Hand Press allows you to resize brass or seat bullets while at the range or away from your loading room. No it won’t replace your Co-Ax or Rockchucker, but this is a handy piece of gear. And it’s very affordable. Midsouth sells the Lee Breech Lock Hand Press Kit, with everything shown above, for $64.52. Or you can buy just the Hand Press by itself for $49.91 at Amazon. That’s a great deal.
Lee Hand Press Quick-Change Die Functionality
This Lee Press includes the Breech Lock Quick-Change Die Feature, so you can instantly change dies with just a twist of the wrist. One Breech Lock Quick Change Bushing is included. The Breech Lock Hand Press is light and compact. It tips the scale at a mere 1 3/4 pounds and overall product length is 11.5″. Note: the maximum overall length cartridge the Lee Hand Press can accept is 3.650 inches.
While we don’t recommend the Hand Press for major full-length sizing chores, it does a good job seating bullets. This makes it a handy “field expedient” tool when doing load development at the range. For example you can experiment with seating depth by loading a batch of cartridges at home with the bullets deliberately seated long. Then, at the range, you can re-seat the bullets progressively shorter (in a series of rounds), until you find the optimal Cartridge OAL.
Lee’s Hand Press is also great for decapping operations. One verified buyer reports: “I mostly use it for decapping while watching TV, with a universal decapper die. Of course it is also useful for other operations. I wouldn’t love sizing large rifle cases with it, but if you’ve prepped your cases on a bigger press you could comfortably take it to the range for load development, one round at a time, working right there at the line instead of making a bunch of loads at home that you’ll have to disassemble later. It’s smaller and more lightweight than it looks[.]”
Using Hand Press to Load at the Range
To learn more about using the Lee Hand Press in the field with a compact scale, read Reloading Without a Bench on GunsAmerica.com. Author Christopher Mace explains: “whether you want a better way to do load development, the capability to reload out of your ‘bugout bag’, or you’re short of space but wanting to get into reloading, the Lee Loaders and the Lee Hand Press offer you some options.”
Here’s something all shooters need — a smartphone App that calculates bullet-hole group sizes from your own photos. The Ballistic-X App is simple to use. Take a photo of your target, set some values (such as bullet diameter and distance to target), then use the touchscreen to place circles around each hole. The App will calculate group size (in MOA or Mils), distance to point of aim, and provide all the info in an overlay. Then click “save” to record your group for posterity!
This App works well, is relatively easy to set-up, and costs just $7.99. It is available for both Android devices and iOS (Apple) devices. There are other ways to measure group sizes from target images, such as the excellent On-Target program, which we have used for years. However On-Target requires a software installation on a Windows platform desktop or laptop. Ballistic-X is a simple, easy-to-install App with versions for both Android and iOS (Apple) Mobile devices.
The Ballistic-X App has a relatively easy-to-use interface. Of course you can choose either MOA or Milrad group values, and Inch or Metric dimensions. There are various labeling options that provide useful info for Load Development. There is even an ATZ (Adjustment To Zero) feature for adjusting your turrets.
How to Use Ballistic-X App
1. Select Photo Source — Choose Camera to take new photo or get image from Photo Library.
2. Set Reference Values — Select Bullet Diameter and enter Distance to Target.
3. Establish Scale on Image — Mark two points on target photo to set scale. For example, if the target has a 1″-square grid lines, mark two points on grid for 1″ distance.
4. Mark Point Of Aim — Put the central X on the aim point.
5. Designate Shot Locations — Place the green circles around each shot.
6. Finalize Data Display — Position Overlay, select size/color options, and export file.
Android Options — Range Buddy FREE App
Along with Ballistic-X, there is another Mobile App, Range Buddy, that also measures shot groups. Range Buddy is currently offered for Android devices only. It is FREE, but has adverts. Range Buddy isn’t bad, but users complained about the program crashing, and there are compatibility issues with newer phones. We recommend you pay $7.99 and stick with Ballistic-X.
Hunting season opens soon around the country. What better way to prepare the mind and spirit for your hunting adventure than to read a classic hunting book? We’ve found ten of the best hunting books every written and provided links below. The list of authors is impressive, including Ernest Hemingway and Theodore Roosevelt.
Recommended Books about Hunting
There’s no shortage of good hunting-related reading material. Here are some of the best books written about hunting. You can find all these titles on Amazon.com. Many are offered in eBook format as well as printed versions. Click on the link(s) below to preview a sample from each book.
If you ever shoot with electronic targets, ShotMarkers, or target cams, chances are you’ll spend lots of time looking at the screen of a tablet computer or iPad. These electronic devices are pretty amazing, but they have one major shortcoming when used outdoors — reflections from the highly-polished glass screen.
Well it turns out there is a simple, inexpensive solution to the problem of annoying tablet screen reflections. Just purchase a quality anti-reflective screen protector for your tablet, iPad, or smartphone and you will eliminate most annoying reflections and make your mobile device MUCH easier to use at the range.
Take a look at the two photos above. The first photo shows how annoying reflections can obscure the ShotMarker display on a tablet. The second shot shows how much easier it is to view the ShotMarker target image with an anti-reflective screen cover in place. BIG improvement!
Our friend Keith Glasscock recently added an anti-reflective screen protector to his iPad tablet and found that it works wonders. Keith recently reviewed the iCarez Matte Screen Protector for his Winning in the Wind YouTube Channel. These screen covers are available in a wide variety of sizes to fit most Apple iPhones and Apple iPads. These thin, matte screen protectors are quite affordable, with prices starting at just $6.95.
In addition, there are other brands of screen protectors for Android devices that work the same way. Again, you’ll find a variety of sizes. For example, Supershieldz now offers a 3-pack of matte screen covers for 10″ Samsung tablets for just $6.99 on Amazon
In the above video, Keith Glasscock explains the problem of screen reflections when using mobile devices for shot monitoring. Keith then describes his positive experience with the iCarez Matte screen cover installed on his personal iPad.
A good screen cover can eliminate this kind of harsh reflection on tablet screens:
Here’s something you don’t see every day — the inside of loaded cartridges, sliced halfway through. This lets you see how bullet core, jacket, cartridge case, powder, and primer all fit together. Give credit to the folks at FOG Ammunition for creating this interesting series of cut-through ammo images. We show four cartridges here: the .308 Winchester, 9mm Luger, 300 BLK, and .50 BMG. You’ll find two more (the .223 Remington and .45 ACP) at www.FogAmmo.com.
This .308 Winchester model took on a different approach by only cutting the brass case and displaying the full bullet, primer and powder load. A spec amount of powder was used to create the model powder form. An estimated 10% volume was added during the forming process, along with an undetermined amount of air pockets.
This bisection is a 9mm Luger Jacketed Hollow Point round with flake powder held together with super glue. After this self-defense round was cut by a trained professional the round was polished by hand. This might look like stick powder, but those are in fact flakes stacked up in cross-section. Designed in 1901 by Georg Luger, this popular cartridge is used by civilians, military, and law enforcement.
For this model of the .300 AAC Blackout (aka 300 BLK), a Dremel tool was used to create a pie cut within the bullet and brass case. A measured amount of power, roughly 65% of spec charge, was placed inside the case with super glue. This cartridge was originally optimized for subsonic use with a suppressor, so the amount of powder used is small relative to the nominal case capacity. That leaves more room for the relatively large .30-caliber bullet.
Last but definitely not least is the .50 Caliber BMG round (aka .50 Browning Machine Gun). Famed for its wartime use in the M2 Machine gun, the .50 BMG round is also used in civilian Long Range competitions. A typical .50 BMG cartridge holds over 225 grains of powder. That’s almost ten times the amount in a 5.56×45 NATO Round! To demonstrate the size of the .50 BMG, check out that .223 Rem for comparison.
Can you form a wildcat cartridge such as the 6 Dasher without expending primer, powders, and bullets? Absolutely. Using the hydro-forming method you can form improved cases in your workshop with no firing whatsoever, so there is no wear on your precious barrel. Watch this video to see how it’s done:
6 Dasher Case Hydro-Forming Demonstration:
Forum member Wes J. (aka P1ZombieKiller) has produced a helpful video showing how to form Dasher cases use the Hornady Hydraulic forming die kit. This includes a two-part die (body and piston), and a special shell holder. To form the case, you insert a primer in your virgin brass, top the case off with with a fluid (water or alcohol), then run the case up into the Hydro-forming die. A few stout whacks with a hammer and your case is 95% formed.
This same procedure can be accomplished with a Whidden Gunworks 6mm Dasher hydraulic form die. We like the Whidden hydro-forming die for its production quality and consistent results. This Whidden system works great according to our Forum members.
Hydro-Forming Procedure Step-by-Step:
1. Insert spent primer in new 6mmBR brass case.
2. Fill with water or alcohol (Wes prefers alcohol).
3. Wipe excess fluid off case.
4. Place case in special Hornady shell-holder (no primer hole).
5. Run case up into Hydraulic forming die.
6. Smack top piston of forming die 3-4 times with rubber mallet or dead-blow hammer.
7. Inspect case, re-fill and repeat if necessary.
8. Drain alcohol (or water) into container.
9. Remove primer (and save for re-use).
10. Blow-dry formed case. Inspect and measure formed case.
Wes achieves very uniform cartridge OALs with this method. He measured ten (10) hydro-formed 6 Dasher cases and got these results: two @ 1.536″; 2 @ 1.537″; and 6 @ 1.538″.
Three or Four Whacks Produces a 95%-Formed Case
With a Whidden or Hornady hydro-forming die, hydraulic pressure does the job of blowing out the shoulders of your improved case. The process is relatively simple. Place a spent primer in the bottom of a new piece of brass. Fill the case with water, and then slip it into a special Hornady shell-holder with no hole in the middle. Then you run the case up into the forming die. Now comes the fun part. You gently insert a plunger (hydraulic ram) from the top, and give it three or four stiff whacks with a mallet (or better yet, a dead-blow hammer). Remove the plunger and you have a 95% formed case, ready to load.
Special Shell-Holder
Hornady supplies a shell holder made specifically for the hydro die; there’s no hole in the bottom of it. Just insert a spent primer into the primer pocket and you’re ready to go. The spent primer, combined with the solid shell holder, keeps the water from seeping out of the primer pocket. The primer pushes out a little bit during this process, but it’s impossible for it to come out because of the way the shell holder is designed. The shell holder has a grove which allows the case to slide out of the shell holder even when the primer protrudes a bit.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Sportsman’s Warehouse — FREE Shotgun with AR15
⏺ Get FREE 12ga shotgun with purchase of F1 Firearms AR-15
Get two guns for the price of one. Buy a F1 Firearms FDR AR-15 for $899.99 at Sportsman’s Warehouse and get a FREE Citadel Boss Hog 12ga Shotgun. That’s right — you get the Shotgun for FREE! The FDR AR-15 is chambered for the .223 Wylde chambering favored by match shooters (you can still shoot .223 Rem in the Wylde chamber). It has a M-LOK free-float handguard over 16″ barrel with fitted A2 flash hider.
2. Bruno Shooters Supply — Bartlein Match Barrels in Stock
⏺ Top-quality barrels, many calibers, avoid months of waiting
You’ll typically wait months to get a quality custom barrel from a top barrel-maker such as Bartlein. However, Bruno’s now has a good selection of Bartlein barrels in stock. You’ll find a variety of calibers, lengths, and contours. But act soon — we expect these to sell out fast.
3. Creedmoor Sports — Trieble Reloading Dies
⏺ Very high quality precision dies from Germany
If you’re looking to produce more precise handloads, then consider upgrading your dies. New to the market are Triebel dies that feature incredible tolerances, are available for a wide variety of cartridges, and are machined from the highest-grade materials.
4. KYGUNCO — Remington .223 Rem Ammo, $569.99/1000
⏺ Exceptional deal — just $0.57/round or $11.40/20 rounds
If you want American-made, name-brand .223 Rem ammo, you can’t beat this deal. Get 1000 .223 Rem rounds for $569.99 with this Remington bulk pack with 55gr FMJ bullets. That works out to just $0.57 per round — HALF what you might pay for other .223 Rem ammo.
5. MidwayUSA — Lee App Deluxe Press, $74.06
⏺ Unique Lee APP vertical feed press good for repetitive processes
Need a dedicated press for repetitive processes such as decapping (spent primer removal) or primer pocket swaging, but don’t want another heavy (and expensive) cast-iron press? Then consider the innovative Lee Deluxe APP (Automatic Processing Press) Reloading Press. With the ability to mount your dies either on the top or bottom, this press offers unique versatility. On sale at MidwayUSA for $74.06, the LEE Deluxe APP also offers a vertical feed function for cases or bullets. This is a great little workhorse for the $74.06 price. NOTE: Press does NOT include raised mount.
6. EuroOptic — SIG Sauer Optics on Sale
⏺ Quality scopes, Red Dots on Sale — Save up to $160
Currently EuroOptic is running a SIG Sauer Optics Sale . You’ll find Tango4 and Whiskey3 scopes on sale along with a variety of Red Dot (reflex) sight systems, including the Romeo5/Juliet3 combo red dot plus magnifier that is great for tactical rifles.
7. Amazon — Double Rifle Case with Shoulder Straps, $56.99
⏺ Versatile, 2-rifle case with comfortable shoulder straps
Here’s a good, affordable case for transporting ARs or tactical rifles. This case hauls two rifles in separate, well-padded compartments. Strong shoulder straps support the weight. For less than $70 you can choose either the 38″ or 42″ Double Rifle Soft Cases in one of several colors. This is a great way to protect two rifles during transport while carrying extra gear in the three outside pockets.
8. Midsouth — Tac-Pod Carbon Pro Bipod, $54.99
⏺ Nice light-weight bipod with versions for Picatinny and M-LOK Rails
If you’re looking for a new lightweight but strong bipod, check out the TruGlo Tac-Pod Carbon Pro Bipod series. These are versatile, with 6-9″ and 9-13″ leg size choices. Choose the Tac-Pod model with your preferred mounting option(s) — Swivel Stud, Picatinny Rail, and M-LOK/KMOD. Right now save $15 with this sale.
9. Amazon — KRATE AR500 Steel Targets, $17.99 and Up
⏺ Tough AR500 steel gongs, excellent user reviews, lifetime warranty
KRATE offers quality, durable AR500 steel targets, starting at just $17.99 for a 4″ Gong. KRATE AR500 targets have a lifetime warranty, and have earned good user reviews. These Tactical AR500 Steel Gongs are 3/8″ thick and come in various sizes set up for hanging chains (sold separately). And get this, right now if you spend at least $25, your Gongs ship for FREE! Along with Gong targets, KRATE also sells AR500 steel silhouette targets through Amazon.
10. Palmetto State Armory — CCI 40gr .22 LR 500 Rds, $54.99
⏺ Excellent price on quality ammo — just $5.50 for 50 rounds
Here’s good, USA-made .22 LR rimfire ammo good for plinking and rimfire tactical games. On sale this week at PSA, this CCI .22 LR Std. Velocity 40gr ammo is just $54.99 for 500 rounds. That works out to just 11 cents per round. That’s hard to beat these days for big-brand .22 LR ammo.
Lee Hand Press Quick-Change Die Functionality
Hydro-Forming Procedure Step-by-Step:
Special Shell-Holder
