Outstanding New Powder from Alliant — Reloder TS 15.5 New Product Review by DasherDude
Alliant has devloped a new temperature-stable powder for long range applications. According to Alliant, this is a “slower burning version of the popular RL 15 with TZ technology” and brings some significant advantages over RL 15 and powders in the similar burn rate range (like Varget). The powder is named “Reloder TS 15.5″ (RL TS 15.5) and is created using the same TZ technology used in Reloder 16 (RL 16) and Reloder 23 (RL 23) whereby it manipulates the response of the propellant and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures. That makes RL TS 15.5 extremely stable across the full temperature range a shooter may encounter.
When Can You Get This New Alliant RL TS 15.5 Powder?
Alliant tells us that new RL TS 15.5 should start arriving on dealer’s shelves by the end of the month. Officially: “We will be putting it into distribution probably in April 2021 sometime”. Remember you heard about this powder here first.
The burn rate of RL TS 15.5 lies between RL 15 and RL 16 making it ideal for loading heavier bullets in .308 Win, 6.5 Creedmoor, 6mm Creedmoor, .223 Rem, and 6mm wildcats such as the 6mm Dasher or 6 BRA (BR Ackley). Being a bit slower than RL 15, new TS 15.5 offers higher velocities for the same charge weight as well as ability to load heavier charges for additional velocity without generating excessive pressure.
Testing Reloder TS 15.5 in 6 Dasher and .308 Winchester
I got a chance to test a pre-production powder sample of RL TS15.5 from Alliant. In my own tests with my 6mm Dasher and .308 Win, I extensively compared it with Varget that I normally use in these cartridges. In both cases, the results were nothing short of spectacular.
Powder Characteristics and Metering
This is an extruded powder and looks and feels similar to RL 16. The kernels are about 0.03 – 0.04 grains each (with the resolution of A&D FX 120i scale). RL TS 15.5 meters very well, although I had to slightly adjust the AutoTrickler to get it to meter perfectly.
As I found, later in the testing, that the powder compresses before it can generate excessive pressure in the Dasher, a drop tube helps to fill the case more efficiently if higher charges and velocities are desired.
6mm Dasher Test Rifle and Load
For testing I used my 6mm Dasher benchrest match rifle. This has a BAT 3L action, 28″ Krieger barrel, and McMillan stock. I use Lapua brass with CCI 450 primers to propel Berger 105gr Hybrids and this combination shoots quite well.
Test Firearm: 6mm Dasher, Bat 3L, 28″ 6mm HV Krieger Barrel, McMillan Stock.
Components: Lapua fire-formed brass, CCI 450 primers, Berger 105 grain Hybrid
Powder: Alliant Reloder TS 15.5
Load Testing and Velocities
Test in 6mm Dasher — Excellent Velocity, Low ES/SD
The testing comprised of shooting groups at 100 yards with increasing powder charges (OCW method) and then selecting a node. That node was found at 33.4 grains. The accuracy was excellent with remarkably low Extreme Spread and Standard Deviation (ES/SD)
My usual load is 32.9 grains of Hodgdon Varget which runs 2925 fps with an ES of around 12 fps and SD around 5 fps. For comparison, 32.9 grains of RL TS 15.5 delivered a velocity of 3022 fps. That is 97 fps greater than Varget for the same load weight (of RL TS15.5).
When used in the 6 Dasher, RL TS 15.5 had ES of 13 for 28 Shots — Remarkable!
More Velocity Plus Consistent ES/SD With the Dasher since the new node (the sweet spot) was found at 33.4 grains, that resulted in a velocity of 3050 fps (a 125 fps velocity increase) from the same rifle setup. Not only did the velocity increase, but the SD was lowered to 3.6 with an ES of 13 (calculated over 28 shots). You read that right… 13 fps ES over 28 shots!
At 34 grains without any drop tube, the load was compressed. However, there were no pressure signs. That indicates that the 6 Dasher cartridge can be loaded with a higher charge, if a drop tube was used.
.308 Winchester Velocity Results
Similar results (velocity gains) were obtained from my .308 Win with Berger 200.20X bullets. For the same charge of 44.2 grains, I recorded about 100 fps higher velocity with RL TS 15.5, compared to Varget.
Accuracy Results at 100 and 300 Yards — Very Impressive
How does RL TS 15.5 shoot on paper? Very well indeed.
6mm Dasher Load Testing with Various RL TS 15.5 Charge Weights
The groups on paper told similar stories. For the OCW method, I shot groups of increasing charges at 100 yards and then selected 33.4 grains as the optimum charge (incidentally, it was one ragged hole).
While testing at 300 yards, the conditions were very windy but since I was testing for vertical, the point of aim was kept the same for every shot. No attempt was made to correct for wind, so the groups spread horizontally (15 mph, 3 o’clock wind) but the vertical spread of all the groups was under 0.3 MOA. That gives me great hopes for the long-range capabilities of the powder.
Thoughts and Conclusions
For the past year, Alliant powders have been a welcome surprise for this tester and they have found a home in my reloading room. I struggled to find a load for my .284 Win with H4831sc and H4350 before trying out Reloder 16 and voila, it was perfect.
I have used Hodgdon Varget powder for a long time in both my 6mm Dasher and my .308 Winchester. With the .308 Win I’ve used various bullets from 168 to 200 grains. Varget has served me well. I do always need to keep the powder charge in check and so the velocities are held back a bit. Now RL TS 15.5 looks like a very impressive competitor to Varget.
With Reloder TS 15.5, Alliant seems to have delivered a harmonious mix of great accuracy, higher velocities, and lower SDs without creating excessive pressure. All of this is delivered with a very temperature-stable package. The higher velocities may allow some shooters to hit a new, better-performing node. These qualities are highly sought after by long range shooters. Accordingly, I have no qualms in saying that Alliant has created a winner here.
Alliant Official Load Data for Reloder TS 15.5
Along with the cartridge types shown below, Alliant has also released load data for .30-06 Springfield, 7x57mm Mauser, .270 Win, .260 Rem, 6.5 Grendel, .257 Roberts, 22-250 Rem, and 224 Valkyrie. CLICK for all data (larger format).
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Palmetto SA — Complete PSA Lower with Adj. Magpul FDE Stock — $249.99
⏺ Good assembled lower with nice stock — add upper and you’re good to go
Get that AR lower while you still can. This complete Palmetto State Armory lower with Magpul stock is fully assembled. It will take a standard upper, which you can build or purchase later without an FFL. The lower is the section that much be purchased through an FFL with a background check. This lower features polished hammer and trigger components with nickel-plating for smoother trigger action. This lower is finished with a Magpul MOE Carbine Stock, Magpul MOE Trigger Guard, and Magpul MOE Grip.
⏺ Good press, powder measure plus many tools for crazy-low price
Though reloading tools are in high demand, right now you can get this very complete Lee 50th Anniversary multi-component kit for $199.99. The main attraction is the Lee Breech Lock Challenger Press with quick-change bushing. (We’ve used this press and it functions well.) In addition, you get a Lee Perfect Powder Measure, Safety Scale, Powder Funnel, and Safety Prime. The kit even includes variety of Case Prep tools: Case trimmer, Chamfer Tool, Primer Pocket-Cleaning tool.
3. EuroOptic.com — Vortex Riflescope Close-outs, Save Hundreds
⏺ Great Value on Vortex Viper Series Close-outs
Vortex riflescopes offer great performance for the price with models suited for all shooting disciplines. Right now you can save hundreds on Vortex Viper scopes at EuroOptic.com, such as the 6-24x50mm Viper PST model. If you are looking for a good scope for varminting or fun matches this is an excellent option. And the Vortex Lifetime Warranty is one of the best in the business.
⏺ Current Data with 5000+ loads, good modern resource
The Hodgdon 2021 Annual Reloading Manual contains data for Hodgdon, IMR and Winchester smokeless propellants. There are over 5000 loads listed in the 168-page manual. Along with comprehensive load data, the 2021 Hodgdon Annual Manual offers authoritative articles by leading gun and outdoor industry writers. Shooting Times magazine, the 2021 Hodgdon Annual Reloading Manual is now available on newsstands everywhere, or directly from Hodgdon. This edition has updated data for 33 cartridge types plus NEW data for 6mm ARC, 6.5 WBY RPM, 27 Nosler, and 458 SOCOM.
5. MidwayUSA — Leupold Mark IV 8.5-25x50mm M1, $999.99
⏺ Great value on superb Second Focal Plane scope with great glass
Here is an excellent optic for varmint shooting and local fun matches. This Leupold Mark 4 Long Range Tactical M1 offers optimal 8.5-25X power range for varminting, along with excellent low-light performance. NOTE: This has a Second Focal Plane reticle which we prefer for varmint hunting. The 1/4-MOA clicks are handy. Save $400 (28%) right now on this deal. This scope enjoys over 91% five-star reviews from actual purchasers. Here’s one review: “I purchased 2 of these at the sale price MidwayUSA has on them. At that price they are unbeatable in terms of toughness, clarity, repeatability. Excellent scope for the money!”
6. Cabela’s — BOG Deathgrip Aluminum Tripod, $149.99
⏺ Versatile tripod mounts quickly, securely — use for PRS/NRL or hunting.
This is a great tripod for long-range hunters and PRS/NRL competitors. The Clamp-type head quickly secures to your rifle’s forearm for a secure shooting solution. The BOG Deathgrip Aluminum Tripod is on sale now at Cabela’s for $149.99. If weight is critical, Cabela’s also a lighter carbon fiber BOG model for $249.99. Either can be purchased online with free shipping to a Cabela’s store. NOTE: Natchez also has the BOG Aluminum Deathgrip Tripod for $149.95 (ADD to cart to see price).
7. MidwayUSA — RCBS MatchMaster, FREE Dies + $100 Gift Card
⏺ Buy MatchMaster, get $186 Free Dies plus $100 Gift Certificate
The RCBS MatchMaster Powder Dispenser is a high-tech, programmable scale/dispenser that combines speed and excellent load weight accuracy. And right now, with an RCBS Promo, you’ll get both FL sizing die and micrometer seating die for FREE if you buy the $899.00 MatchMaster. The retail value of the die set is $185.95. But wait — it gets even better. If you purchase from MidwayUSA you get a $100 MidwayUSA Gift Certificate. So, with this deal you pay $899 but get $286 worth of product value. To qualify for the Free Dies deal, the MatchMaster must be purchased 4/1/2021 through 4/30/2021.
⏺ Great Value on versatile security cabinet — good secondary safe
In addition to a heavy, primary gunsafe, many gun-owners can use a smaller security cabinet for another area of the house, for the garage, or even for an RV. If you’re looking for a good basic gun locker, check out the SnapSafe Premium 12-Gun Tactical Cabinet. It has a simple key-lock system and can fit in most closets. Purchasers praised this unit given the low cost: “For a gun case below $200 you can’t get much better than this” and “More of a light-weight gun locker … it is well made and sturdy though, and is much better than I expected for the price.”
9. Amazon — MAXUS Dante Milligram Scale, $16.99
⏺ Great price for nice hunting rifle; many calibers, coated action + barrel
Having a good compact utility scale is great for weighing bullets, primers, and brass. Everyone should have a small battery scale for loading at the range or sorting bullets by weight. Right now you can get a decent digital scale for a mere $16.99. Despite the low price, this MAXUS Dante Milligram Scale has earned good owner reviews. The scale reads up to 771 grains and comes with batteries, check weight, and powder pan.
10. Amazon — 10000mAh Dual USB Battery Packs, $19.99
⏺ Recharge your smartphones and tablets — good for Labradar too
Do you have a cellphone, tablet, LabRadar, barrel cooler or other device that needs mobile power? If so, we found a killer deal on a pair of Miady 10000mAh Dual USB Portable Chargers. Yes you get TWO (2) charging packs for just $19.99 total! Featuring USB and USB-C ports and fast 2 amp charging capability, this pair of portable power banks is one of the best deals we’ve seen.
Sako Ltd. was founded on April 1, 1921. So this week Sako celebrates its 100th birthday. Now part of the Beretta firearms family, this prestigious Finnish firearms manufacturer has a rich history of producing quality rifles constructed by skilled master craftsmen.
The original Sako factory was established as part of the Finnish Civil Guard and was designed to meet its gun repair needs. The workshop became an independent financial unit on April 1, 1921. Sako marks that date as its moment of establishment. The workshop was initially called Suojeluskuntain Ase-ja Konepaja Osakeyhtiö (Civil Guard Firearm and Engineering Co Ltd). In 1927, it became a limited company with its name abbreviated to the acronym Sako.
The company then moved from Helsinki to a factory site in Riihimäki, where it continues to operate to this day. In Riihimäki, the assembly of a new model of rifle, the M28, began. Nicknamed ‘Pystykorva’ (the dog breed ‘Spitz’), this rifle proved to be of even better quality than similar weapons being used by Finnish defense forces. Simultaneously, the company also began to manufacture cartridges.
During the 1950s, Sako entered the U.S. market. The Sako L46 rifle impressed American hunters. The L46’s build quality and excellent performance quickly drew loyal American customers, and exports of Sako products to the USA steadily increased year after year.
One Million Tikka T3s Have Been Sold
For the past 21 years, Sako has seen major growth in yearly product volumes. In 2020, Sako manufactured and sold the one-millionth unit of the Tikka T3, a rare feat for any bolt action rifle. 2020 also saw the launch of the revamped Sako S20 hybrid rifle. This versatile rifle allows the user to switch between hunting or precision shooting by simply exchanging the fore-end and stock.
Also, Sako reached its all-time production record at more than 113,000 rifles produced in a year and broke its record for cartridge production with more than 11 million cartridges made. Additionally, Sako launched its first copper bullet designed and manufactured in-house, the Sako Powerhead Blade.
In 1996, Sako saw a huge success in their Sako 75 range of products, which was Sako’s first model to be designed as new from the very beginning. This success launched Sako into its next step with major international sales. In 1999, Beretta Holding Group acquired all the company’s shares. “At Beretta USA, we are proud to partner with the highly skilled and experienced men and women of SAKO as they continue to innovate and deliver top-quality, high-performing, precise, and reliable rifles to our demanding American customers,” Francesco Valente, GM and COO of Beretta USA, said.
This story features a unique, American-designed rimfire rifle, chambered for the potent .17 HMR round. The current generation T-Bolt has a tang-mounted ambidextrous safety, a choice of barrel contours, lengths, and finishes, and a variety of stock options. What sets the T-Bolt apart from other rimfire rifles is the way the action cycles. There is not a conventional bolt that requires four distinct motions (lift bolt handle up/pull back/move forward/rotate handle down). With the T-Bolt you simply pull the handle straight back to extract a round, then return it forward to chamber a new round from the Double Helix magazine. The cocking effort is divided between back pull and forward movement so the effort is relatively light and easy.
Among current rimfire rifles, the Browning T-Bolt ranks high for fit and finish. The bluing is very nice and the T-Bolt even boasts a gold-plated trigger shoe. Many different stock types have been offered in recent years including some very nice AA Maple stock models as shown below (click to zoom). These T-Bolt rifles exhibit very fine craftmanship. Current models are made in Japan under license to Browning.
Click image for full-screen T-Bolt photo with detail.
Browning T-Bolt Sporter AA Maple Model
RECEIVER – Steel; High polished finish; Drilled and tapped for scope mounts
BARREL – Medium Sporter; Blued finish; Free-floating; Semi-match chamber; Recessed crown
ACTION – Straight pull bolt action; Top-tang safety; Adjustable trigger
STOCK – AA Maple; Gloss finish; Checkered
FEATURES – Sling swivel studs installed
PRODUCTION – Limited quantities
T-Bolt Owner Talks about Function and Accuracy
“I have a Browning T-bolt in .17 HMR, but with the maple stock. It is probably my favorite .17 HMR rifle (also the most expensive). The rifle feels smaller than some of my other .17 HMR rifles. I think the length of pull is a little shorter. I do like the light weight and trim handling of the rifle and the straight-pull bolt can be cycled really quickly. Mine is quite accurate and will shoot one-inch groups at 100 yards with both Hornady ammo and the CCI A17 ammo.” — RexRay, Varminter.com Forum member.
Pros and Cons of the Browning T-Bolt
The T-Bolt has a reputation for good accuracy, provided you have a good lot of .17 HMR ammo (we recommend checking for bullet run-out before you shoot for groups). The straight-pull action works as advertised — it is fast, smooth, and easy-to-operate. The Double Helix magazine (covered below) is excellent. It is very compact yet ultra-reliable. Another plus is that the T-Bolt has been produced in many different versions, with a variety of stocks, and even a stainless action version.
What are the negatives? Some of the stocks have a somewhat short length-of-pull, but this is easily solved with spacers. The main complaint is the factory trigger — some owners say it is too heavy at about 4 pounds, though the break is clean. For varmint work, we could live with the stock trigger and put money saved into optics.
If you prefer a very light trigger, JARD makes a T-Bolt replacement trigger. Featuring an aluminum housing, the JARD T-Bolt trigger can be ordered with 12-, 16-, or 20-ounce pull weights. The JARD trigger offers a crisp, clean break significantly lighter than stock. But at $249.99 the JARD trigger is fairly expensive. Additionally there have been a couple complaints about slam fires at the lowest weights so we recommend the 20-ounce. Here is one owner review, from a Rimfire Central thread: “The new Browning T-Bolt is a great rifle in all aspects except for the trigger. In my case when I received my JARD trigger it was an almost drop-in installation with very little adjusting or fooling around. For me it made a decent little rifle a great little rifle.”
Browning Double Helix 10-Round Magazine
The T-Bolt’s patented 10-round rotary Double Helix™ magazine is a unique design that feeds very reliably and is easy to load. The Double Helix magazine uses a torsion drive spring and interlocking gear design to maintain correct timing and exact cartridge alignment for smooth, reliable feeding. The translucent gray body allows for easy verification of the number of remaining cartridges. We like the fact that the Double Helix provides TEN-round capacity while fitting nearly flush with the bottom of the action.
The Browning Double Helix rotary box magazine system is easy to load, easy to carry, and easy to use. The smooth, rounded exterior contours of the Double Helix, along with twin gripping grooves, tapered shape and a slightly extended baseplate design make insertion positive, while the spring-assisted drop-free magazine ejection feature allows for rapid magazine changes. T-bolt owners confirm that feeding and reliability is excellent — the magazine design puts cartridges in perfect alignment with the chamber.
Other Browning T-Bolt Variants
In recent years, Browning has produced T-Bolt rifles in a variety of models, with many different stock types and various barrel lengths/contours. Most of the photos above showcase the AA Maple Sporter T-Bolt, which is currently out of production, though still available from some dealers (if you search). We like the looks of the AA Maple T-Bolt, but there many other stock options including dark brown, Black, Green, and various camouflage finishes. Use the links below to see all the T-Bolt configurations.
Here are 4 other T-Bolt variants, first the new-for-2021 T-Bolt Target with muzzle brake, then the Limited Edition Cerakote T-Bolt Speed model, and two discontinued T-Bolts, a composite-stocked carbon finish model and a Varmint Special with stainless action and thumbhole laminated stock. Current production T-Bolts are offered in three rimfire chamberings: .17 HMR, .22 LR, and .22 WMR. Barrel contours and lengths (from 16.5″ to 22″) vary from model to model.
Do you like the T-Bolt? Well there is a 5% Off Rebate Program available right now that covers the T-Bolt and all other Browning firearms.
.17 HMR Cartridge — Fast and Deadly on Small Varmints
We are big fans of the .17 HMR round. It’s just about perfect for ground squirrels, and is effective on prairie dogs out to about 200 yards. The three main .17 HMR producers have been CCI, Federal, and Hornady. Choose from 17gr or 20gr bullets — both work well in the varmint fields. Norma also makes .17 HMR ammo with 17gr V-Max bullets. This Norma .17 HMR ammo has shown very good accuracy.
CCI .17 HMR TNT offers 2650 FPS Velocity
For varmint work we like CCI’s latest .17 HMR VNT ammo. This boasts class-leading 2650 FPS muzzle velocity. Engineered to combine good accuracy with high impact energy, this CCI TNT ammo features a 17gr polymer-tipped bullet designed for rapid expansion. We also like the Norma .17 HMR ammo. “With outstanding accuracy and excellent energy transfer… The .17 HMR has a very loyal following among hunters and target shooters alike”, said Paul Lemke, G.M. for Norma/RUAG.
This video shows the process of cut-rifled barrel-making by Krieger Barrels, one of the world’s best barrel manufacturers. Krieger cut-rifled barrels have set numerous world records and are favored by many top shooters. The video show the huge, complex machines used — bore-drilling equipment and hydraulic riflers. You can also see how barrels are contoured, polished, and inspected.
For anyone interested in accurate rifles, this is absolutely a “must-watch” video. Watch blanks being cryogenically treated, then drilled and lathe-turned. Next comes the big stuff — the massive rifling machines that single-point-cut the rifling in a precise, time-consuming process. Following that you can see barrels being contoured, polished, and inspected (with air gauge and bore-scope). There is even a sequence showing chambers being cut.
Click Arrow to Watch Krieger Barrels Video:
Here is a time-line of the important barrel-making processes shown in the video. You may want to use the “Pause” button, or repeat some segments to get a better look at particular operations. The numbers on the left represent playback minutes and seconds.
Krieger Barrel-Making Processes Shown in Video:
00:24 – Cryogenic treatment of steel blanks
00:38 – Pre-contour Barrels on CNC lathe
01:14 – Drilling Barrels
01:28 – Finish Turning on CNC lathe
01:40 – Reaming
01:50 – Cut Rifling
02:12 – Hand Lapping
02:25 – Cut Rifling
“At the start of World War Two, Pratt & Whitney developed a new, ‘B’ series of hydraulically-powered rifling machines, which were in fact two machines on the same bed. They weighed in at three tons and required the concrete floors now generally seen in workshops by this time. Very few of these hydraulic machines subsequently became available on the surplus market and now it is these machines which are sought after and used by barrel makers like John Krieger and ‘Boots’ Obermeyer. In fact, there are probably less of the ‘B’ series hydraulic riflers around today than of the older ‘Sine Bar’ universal riflers.” — Geoffrey Kolbe, Border Barrels.
With the ongoing COVID-19 restrictions, plus the anti-gun rhetoric coming out of Washington, it’s important to have some diversions from the unsettling news. To help get your mind off COVID and the ongoing attacks on the Second Amendment, here are some great FREE BOOKS to read. You can download these to your computer, laptop, or tablet, and read them whenever you like.
Do you enjoy classic hunting adventures from around the globe? Then log on to the NitroExpress.com Forum. There you’ll find links for literally hundreds of vintage hunting stories, and even complete books, such as Teddy Roosevelt’s classic African Game Trails and Good Hunting, plus the wonderful book African Campfires by Stewart E. White, one of Roosevelt’s close friends and hunting companions.
Among the downloadable titles are The Man-Eating Lions of Tsavo (leaflet edition) by Lt.Col. J. H. Patterson, the true tale that inspired the Hollywood movie, The Ghost and the Darkness, staring Michael Douglas and Val Kilmer. The online version of the Man-Eaters of Tsavo book (right) is a shorter, 140-page edition created for Chicago’s Field Museum, which purchased the skins of the lions from Patterson and put them on display.
Get ready to sign up folks! Registration for the 2021 NRA National Championships for Smallbore Rifle, High Power Rifle, F-Class, and Precision Pistol opens in five days. Online registration will open at 9:00 am Eastern Time on Thursday, April 8, 2021.
These 2021 NRA Championships will be held at Camp Atterbury, Indiana, from July 6, 2021 through August 28, 2021. Camp Atterbury has hosted the High Power Rifle Nationals since 2017. Here is the schedule:
Smallbore Rifle Championship: 6-18 July, 2021
Precision Pistol Championship: 20-25 July, 2021
F-Class Mid-Range Championship: 21-25 July, 2021
F-Class Long Range Championship: 27-30 July, 2021
Fullbore Championship: 1-7 August, 2021
High Power Mid-Range Championship: 9-13 August, 2021
High Power Long Range Championship: 14-19 August, 2021
ELR 1-Mile Championship: 20-21 August, 2021
Over-the-Course (OTC) Competition: 22-28 August, 2021
NOTE: Listed dates include registration/sign-up and/or practice day, and award ceremony.
See 2021 Camp Atterbury NRA National Championships calendar below. CLICK to view larger, full-screen, printable image that is easier to read. ENLARGE (+ with mouse) after loading to read small print.
CLICK CALENDAR to VIEW Full-screen PDF then click Enlarge (+)
Above is the Official Calendar for the 2021 NRA National Championships at Camp Atterbury. The 2021 NRA Nationals start with the Smallbore Championships, July 6 through Sunday, July 18. The Precision Pistol National Championships begin on Tuesday, July 20. The F-Class Mid-Range Nationals start July 22, with F-Class Long-Range commencing on July 27. Moving on to High Power Rifle, the Fullbore event runs August 1-7, while the Mid-Range Nationals begin on Tuesday, August 9, followed by the Long-Range Nationals starting on August 14, 2021. Then the NRA Extreme Long-Range (ELR) Championship begins on Friday, August 20 and concludes Saturday, August 21.
John Parker, Shooting Sports USA Editor, says this should be an exciting summer for rifle shooters: “As for High Power Rifle, the 2021 NRA Mid-Range, Long-Range, F-Class Long-Range, F-Class Mid-Range and International Fullbore Championships will also be fired at Camp Atterbury. The matches will begin on July 23 and run through August 29. Plus, the Extreme Long-Range Championship is slated to return on August 20…. This popular event that debuted in 2017 at Camp Atterbury is a can’t-miss for ELR competitors [with] targets at one mile and beyond.”
To learn more about the 2021 NRA Nationals, visit compete.nra.org. And for the latest updates, subscribe to the free Shooting Sports USA Insider newsletter.
This Easter Weekend Save 10% off Creedmoor Brand Products with Promo Code EASTER.
Here’s good news for shooters getting their gear for the 2021 season. Creedmoor Sports is now offering 10% OFF all Creedmoor brand products. If you need a quality shooting coat, shooting mat, scope stand, sling, glove, data book, or other shooting accessory, here’s your chance to save. Hundreds of Creedmoor-branded products are 10% OFF through Monday, April 5, 2021 at 12:00 PM CST.
CLICK HERE to see all the discounted products. Remember, to get the 10% Discount you need to use Discount Code “EASTER” during checkout. Below are some of the best-selling Creedmoor brand shooting sports products on sale.
Here are some of the quality Creedmoor brand items on SALE:
Three Shots Standing at 400 Yards in 4.37 Seconds Could you hit a silhouette target at 400 yards, shooting offhand? Probably, with a little practice. Now try doing that three times in just 4.37 seconds, including picking up/mounting the rifle! Not possible? Watch the legendary Jerry Miculek do that in this impressive demonstration of rapid-fire rifle shooting.
Jerry Miculek — that name is synonymous with revolvers. But Jerry is also one heck of a rifleman, as he demonstrates in this video. Grabbing his AR rifle from the top of an oil drum, Miculek proceeds to put shots on three different steel targets at 400 yards — all in under 4.4 seconds. Most of us would be lucky to make one successful shot in that time limit. Watch the successful 3-shot sequence starting at 2:19 time-mark in the video.
In this video, Jerry hits not one but THREE c-zone targets at 400 yards. And he does this in under 4.4 seconds starting with his rifle laying on a support. It took Jerry two tries (on his first run he hit 2 out of 3 in 4.65 seconds). On the second attempt (see video starting at 2:19), it takes Jerry just 4.37 seconds to shoulder his rifle, aim, and fire three shots, each hitting a separate steel target. Wow. That’s truly remarkable. Most of us would need ten seconds (or more) just to get the scope on the first target.
Trust us folks, this ain’t easy. It takes remarkable marksmanship skills to shoot with this kind of precision at this kind of pace. As Jerry would say himself, “Not bad for an old guy who needs glasses”.
The firearms and shooting accessories price-search website Gun.Deals has created a useful collection of new long guns for 2021. These run the gamut from tactical rifles to classic lever-action guns. There are new super light-weight models such as the Savage 110 Ultralite and the Nosler Model 48 Carbon Mtn. Rifle with carbon-stock and carbon-wrapped barrel. For young shooters, or folks looking for a fun yet very affordable .22 LR rig, there is the Winchester Wildcat 22 Suppressor Ready. And if you like something new and very different, there is the brand new straight-pull Savage Impulse Big Game. SEE ALL RIFLES.
From these 10 rifles, here are three of our favorites:
Springfield Armory Waypoint
The new Model 2020 Waypoint rifles feature optional carbon-wrapped barrels, TriggerTech triggers, and carbon-fiber, hand-painted camo stocks. The excellent TriggerTech trigger easily adjusts from 2.5 to 5.0 pounds. The base Model 2020 Waypoint has a fluted stainless barrel. The carbon-wrapped barrel is an extra-cost option, as is the adjustable cheekpiece.
Savage Impulse Straight-Pull Rifle
Savage’s new Impulse series of straight-pull bolt rifles is the first American-designed and crafted straight-pull centerfire rifle. The new Impulse features an innovative Hexlock bolt-locking mechanism with six spherical bearings that move radially outward into a ring in the barrel extension, thereby locking the bolt in place. That barrel extension is held in the receiver assembly by four cross-bolts on the lower front section. Ahead of the barrel extension is a conventional recoil lug and a familiar Savage barrel nut.
Winchester Wildcat 22 Suppressor Ready
Winchester has introduced a Wildcat SR, a suppressor-ready version of its popular Wildcat 22 semi-auto .22 LR rifle. This new Wildcat SR comes with a 16.5″ barrel threaded 1/2-28 TPI at the muzzle (with muzzle cap). This will allow the Wildcat SR to fit most rimfire suppressors as well as many muzzle brakes.
With the Dasher since the new node (the sweet spot) was found at 33.4 grains, that resulted in a velocity of 3050 fps (a 125 fps velocity increase) from the same rifle setup. Not only did the velocity increase, but the SD was lowered to 3.6 with an ES of 13 (calculated over 28 shots). You read that right… 13 fps ES over 28 shots!
In recent years, Browning has produced T-Bolt rifles in a variety of models, with many different stock types and various barrel lengths/contours. Most of the photos above showcase the AA Maple Sporter T-Bolt, which is currently out of production, though still available from some dealers (if you search). We like the looks of the AA Maple T-Bolt, but there many other stock options including dark brown, Black, Green, and various camouflage finishes. Use the links below to see all the T-Bolt configurations.
Among the downloadable titles are 
