Here’s something all shooters need — a smartphone App that calculates bullet-hole group sizes from your own photos. The Ballistic-X App is simple to use. Take a photo of your target, set some values (such as bullet diameter and distance to target), then use the touchscreen to place circles around each hole. The App will calculate group size (in MOA or Mils), distance to point of aim, and provide all the info in an overlay. Then click “save” to record your group for posterity!
This App works well, is relatively easy to set-up, and costs just $7.99. It is available for both Android devices and iOS (Apple) devices. There are other ways to measure group sizes from target images, such as the excellent On-Target program, which we have used for years. However On-Target requires a software installation on a Windows platform desktop or laptop. Ballistic-X is a simple, easy-to-install App with versions for both Android and iOS (Apple) Mobile devices.
The Ballistic-X App has a relatively easy-to-use interface. Of course you can choose either MOA or Milrad group values, and Inch or Metric dimensions. There are various labeling options that provide useful info for Load Development. There is even an ATZ (Adjustment To Zero) feature for adjusting your turrets.
How to Use Ballistic-X App
1. Select Photo Source — Choose Camera to take new photo or get image from Photo Library.
2. Set Reference Values — Select Bullet Diameter and enter Distance to Target.
3. Establish Scale on Image — Mark two points on target photo to set scale. For example, if the target has a 1″-square grid lines, mark two points on grid for 1″ distance.
4. Mark Point Of Aim — Put the central X on the aim point.
5. Designate Shot Locations — Place the green circles around each shot.
6. Finalize Data Display — Position Overlay, select size/color options, and export file.
Android Options — Range Buddy FREE App
Along with Ballistic-X, there is another Mobile App, Range Buddy, that also measures shot groups. Range Buddy is currently offered for Android devices only. It is FREE, but has adverts. Range Buddy isn’t bad, but users complained about the program crashing, and there are compatibility issues with newer phones. We recommend you pay $7.99 and stick with Ballistic-X.
Can’t find Hodgdon Varget on dealer’s shelves? then consider IMR 4166. This Enduron series powder is temp-stable and accurate. It also offers good load density and meters reasonably well. Importantly, it seems to be a good substitute for “unobtanium” Varget powder. On the official Hodgdon/IMR burn rate chart, IMR 4166 is between H4895 and Varget. Some of our Forum members have reported excellent results with IMR 4166 in cartridges that work with Varget, such as the 6mmBR, 6 Dasher, 6.5×47 Lapua, and .308 Win. One member wrote: “in my 6.5×47 … IMR 4166 gives speeds and accuracy pretty much exactly the same as Varget.” And other shooters have observed reduced copper fouling with Enduron series powders, so IMR’s Enduron anti-fouling chemistry does seem to work.
Where to Find IMR 4166 Powder Powder Valley Inc. (PVI) and Midsouth Shooters both have plenty of IMR 4166 in stock right now. IMR 4166 performs well in the .308 Win (for bullets up to 175 grains) and in 6mm cartridges running the heavier (95-107gr) projectiles. IMR’s press release states: “IMR 4166 [has] a perfect burn speed for cartridges like the 308 Win/7.62mm NATO, 22-250 Remington… and dozens more.”
IMR 4166 is one of IMR’s Enduron family of propellants. Enduron powders are formulated to reduce fouling and to be stable across a wide temperature range. If you commonly use Varget, Alliant Reloder 15, Norma 203B, IMR 8208 XBR, or Vihtavuori N140, you might want to try IMR 4166. It is available right now at Midsouth Shooters and Powder Valley in both one-pound and 8-pound containers:
How do you trim your cases? We use a variety of tools, including power case trimmers. But our go-to trimmer for Benchrest-type cartridges is the L.E. Wilson Trimmer unit, now available in a handsome and durable stainless assembly. This thing is slick. It trims very precisely with the use of Wilson case holders combined with a micrometer-type stop for length control. As sold complete with micrometer, quick clamp, and metal stand, this Wilson Stainless Trimmer is $154.95 at Creedmoor Sports. We think that’s a fair price for a unit that can last a lifetime, trimming many thousands of cases.
In this video, Bill Gravatt of Creedmoor Sports demonstrates the Stainless Wilson trimmer with micrometer length control. Gravatt offers helpful operational tips to improve trimming efficiency, so this video is worth watching even if you’ve used a Wilson trimmer before:
Tips for Trimming with Wilson SS Micrometer Trimmer:
1. After inserting brass in the case holder, tap the case lightly to ensure it seats fully.
2. When starting your case-trimming session, do one or two test cases to check cut length. Adjust length with micrometer, then test length again. If “good to go”, set length stop. NOTE: Release the Stop Screw to make major adjustments. Use the Micrometer to make fine adjustments, in .001″ increments.
3. After trimming operations, be sure to chamfer case mouth after cutting to remove burrs. NOTE: After you have made the chamfer, we recommend gently spinning the chamfer tool backwards a couple times in the case neck. This will burnish/smooth the newly-cut champing, which helps with bullet seating.
Features of Deluxe Wilson Stainless Case Trimmer with Micrometer
— Long lasting Stainless finish with Micrometer adjustment.
— New 304 Stainless Steel Handle included with Micrometer Trimmer.
— Rotary-style clamp swings to secure case-holder — quick and easy.
— Larger stop screw adjustment from 3/8″ (old) to 1/2″ (new) with increased width on stop nut. Coated with black oxide for a long lasting durable finish.
— Made in the USA with American Steel.
— Power Adaptor compatible.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Midsouth — RCBS Chargemaster Combo and CM Lite Sale
⏺ Classic Chargemaster and CM Lite are both excellent units with good controls
RCBS Chargemaster electronic powder dipsensers are exceptional bargains right now. For a limited time, you can pick up the RCBS Chargemaster Combo for $244.49 after $75 RCBS Rebate. Or get the RCBS Chargemaster Lite for $179.49 after $50 RCBS Rebate. These are crazy low prices with RCBS Rebates. IMPORTANT: This RCBS Buy Green Get Green Rebate expires Monday, August 31, 2020! Purchases on September 1, 2020 or later do NOT qualify for the rebate! Got That?
2. CDNN Sports — T/C Compass $289.99 with 3-9x40mm Scope
⏺ Three popular chamberings, killer deal includes scope, rings and sling
Here’s a great deal for a basic hunting rifle. CDNN is offering Thompson Center Compass bolt-action rifles in 6.5 Creedmoor, .308 Win, or .300 Win Magnum for only $289.99. That’s a killer deal by itself, but this package includes a FREE 3-9x40mm scope and neoprene sling. Just add ammo to your cart and you’re off to your favorite hunting spot.
3. Amazon — All Teslong Digital Borescopes 20% OFF
⏺ Excellent image quality, choose flexible or rod-type borescopes
Teslong borescopes have become the go-to instrument of choice for serious shooters who need to look INSIDE their barrels. Teslongs are affordable yet they produce remarkably clear and sharp images. Teslong now offers a wide selection of borescopes that will work with your computer and mobile devices. SEE the Teslong Borescope Line HERE, including both flex-cable and rigid models. Use Code THXJM15P for 20% SAVINGS on all Teslong models.
4. Graf & Sons — Berger Ammunition and Bullet Sale
⏺ Berger bullets win matches. Berger loaded ammo is made with Lapua brass
Berger is known for its excellent projectiles. But did you know Berger also produces outstanding hunting and target ammunition. Right now Grafs.com has Berger hunting bullets and ammunition on SALE. You’ll find a wide range of bullet calibers, plus loaded ammo for 6.5 Creedmoor, .308 Win, .338 Lapua and other popular cartridge types. Grab a few boxes before your next hunt.
⏺ Very versatile for guns, hobby use, made in USA, nice case
When working on your guns or reloading hardware, you need good drivers. This Chapman 28-piece tool kit boasts 24 bits plus midget ratchet, screwdriver handle, extension, and a handy case with slots for each tool. You get Phillips, Metric, Slotted, and Standard Hex Bits all milled from tool steel in the USA. If 24 drivers isn’t enough, Chapman offers other larger sets with 30 pieces ($59) and 57 pieces ($112).
⏺ Get three (3) pistol racks, plus barrel hangers for 50% OFF!
If you have a sizeable handgun collection, jump on this great MidwayUSA pistol package deal. For just $24.99 you get one 8-pistol rack, one 6-pistol rack, and one 4-pistol rack — but that’s not all. You also get a 4-pack of Hornady Pistol Hangers. All these safe accessories are made of PVC-coated hardened steel which accommodate heavy 22 caliber and larger handguns. The SnapSafe Pistol rack will hold virtually all pistols and revolvers. The hangers work with shelves that are 1/2 to 1 inch thick. BONUS: If you buy two sets, you get FREE Shipping! MidwayUSA is offering free shipping right now for all orders over $49 Total.
⏺ Rapid Access, no key required, holds two handguns, bargain price
You want your handguns secure, but also quickly accessible. For home security, a rapid-access gun safe is a good option. Ktaxon Quick Access Pistol Safe is one-third the price of some similar handgun safes. With a programmable 3 to 8 digit finger entry combination code you can instantly open the safe’s spring-loaded door. And yes, this pistol safe can be bolted down for greater security. IMPORTANT: The Walmart page mentions fingerprint recognition. This $49.99 safe does NOT have fingerprint recognition — got that? You need to tap with your fingers on the pads or used the supplied metal key.
8. Amazon — Motion-Sensor LED Interior Light, $14.99
⏺ Activates when door opens, Rechargeable, 3 LED Light Levels
Here’s a great accessory for your Gun Safe or closet. This rechargeable LED lamp turns itself on when you open the door, and off when you close the door. Select three brightness levels: 10LED, 20LED, 30LED. With the supplied 3M adhesive magnetic strip you can easily attach the light to the inner walls of your gun safe. And then quickly remove the unit for charging with a standard USB cord (no batteries to replace!). It works, it’s handy, and it’s inexpensive — just $14.99 on Amazon. These motion-sensor LED lamps can also be used in garages or stairwells. NOTE: this is Amazon’s choice for rechargeable LED Motion-Sensor lights.
9. Amazon — Pro For Sho Shooting Ear Protection, $16.45
⏺ Very affordable, tapered design, nine color choices
Always wear hearing protection at the shooting range. We recommend double protection — earplugs under a full-protection set of earmuffs. ThePro For Sho Shooting Ear Protection muffs provide good protection at minimal cost. These lightweight earmuffs are tapered for more clearance on your stock. Pro For Sho muffs, with claimed 34 dB noise reduction (not the same as NRR), come in 9 different colors. At this price you can grab muffs for yourself and another backup set for guests.
British rimfire ammo-maker ELEY has created a new global match series. Shooters compete at there local ranges, and then scores are compared to other shooters around the world. There will be five Precision Club Masters competitions: Benchrest, Prone, 3-Position, Practical, and Pistol. At the end of the season, the top competitors will receive glory, and, yes, valuable prizes from ELEY.
ELEY is excited to launch its brand new ELEY Precision Club, allowing competitors from all over the world to compete against each other from their local shooting clubs. Scores will be tallied online through an exciting Masters series of events. Winners can be recognized as a World Champion. In addition, top shooters compete for valuable cash, ammunition, and clothing prizes.
ELEY states: “We love… to connect with shooters across the globe. With an uncertain future, and the current global situation restricting travel, the ELEY Precision Club hopes to provide shooters with a fun, safe alternative for competing. The fun must go on!” The ELEY Precision Club will provide shooters of all ages and abilities from a range of disciplines to compete on a global stage against other shooters internationally.
Here is our friend Joe Friedrich. Joe has set many benchrest records with ELEY .22 LR ammunition.
First Precision Club Event Will Be ELEY Benchrest Masters
The first competition to be hosted on the myELEY.com platform is the ELEY benchrest masters. Competitors will shoot six (6) 25-bull targets at a distance of 50 meters. Scores must be uploaded to the myELEY.com dashboard by 11:59 pm on November 1, 2020 (GMT). That’s just before midnight in the United Kingdom.
Image from National Rimfire Benchrest Association of Ireland (NRBAI).
How to Enter ELEY Precision Club Events
To participate, you first need to register on the ELEY Precision Club homepage. Once you register, ELEY will create a personalised myELEY.com competition dashboard for you and send you login details by email.
To get started: Complete the registration form. Once your competition dashboard is created you will have instant access to any future ELEY online competitions. The myELEY.com personalised dashboard compiles statistics and results and tracks your world ranking. Once your personal dashboard is created, you’ll get instant access to all future ELEY Precision Club online competitions.
To learn more about the 5-discipline ELEY Masters series, or to enter the first benchrest match, go to Eley.co.uk/precisionclub.
William “Tom” Collins earned the CMP’s Distinguished Rifleman Badge #2500 this July. Collins earned his final EIC points at the Washtenaw Sportsman’s Club in Michigan.
One of the highest honors in competitive shooting is earning the Distinguished Rifleman Badge. This Badge was created by the War Department in 1884 to recognize members of the U.S. Army for Excellence-in-Competition (EIC) with the Army’s service rifle. Other U.S. Armed Forces soon adopted a similar program and in 1926 civilians were authorized to participate. This story is about William “Tom” Collins, 50, of Maumee, Ohio, who earned his badge in July 2020. His achievement was a landmark — Civilian Distinguished Rifleman Badge number 2500.
Collins Earns Distinguished Rifleman Badge Number 2500
Story based on Report by Ashley Brugnone, CMP Staff Writer
For over 20 years, the Civilian Marksmanship Program (CMP) has issued Distinguished Badges to competitors who collect at least 30 Excellence-In-Competition (EIC) “leg” points — earned by placing in the top 10% of an EIC match. This story is about Ohio shooter William “Tom” Collins, who recently earned Distinguished Rifleman Badge number 2500. [Editor: To learn more about the history of the Distinguished Rifleman Badge and what is takes to earn it, read Distinguished Rifleman — the Chase for Excellence by Jonathan Ocab.]
For Collins, this fulfilled a dream to join generations of elite marksmen before him. “The Distinguished Rifleman Badge has been a goal of mine since I learned about it,” Collins said. “I like to think back on the history of the badge … It makes me proud to be a part of that.”
Collins earned Distinguished Rifleman Badge #2500 in July. “Shooting is almost like meditation to me”, Collins said. “You really can’t think about anything other than the current shot. It’s very relaxing.”
He gives simple advice to other competitors hoping to one day earn a Distinguished Badge of their own: “Anyone working on it – quit thinking about it. Just shoot.”
Collins is congratulated by his friend Jamie Root after “going Distinguished”.
Collins has been shooting most of his life. Growing up in rural Ohio, he received his first BB gun around seven years old and his first .22 at age 11. It wasn’t until he joined the Army Reserves in 1987 that he received any formal marksmanship training. After he left the Reserves nine years later, he started looking toward organized shooting sports.
One day, back in 2014, he picked up his rifle and took the 45-minute drive to Fremont, Ohio, to fire in his first GSM (Garand-Springfield-Modern/Vintage Military) Match at the Sandusky County Sportsmen’s Club. It was there that he met Jesse Bragg, who was running the event.
Jesse Bragg, a retired staff sergeant from the Marine Corps Reserve Rifle Team, took Collins under his wing and showed him the ropes. Collins says Bragg seemed to want to teach more than run the match. In fact, Bragg was the one who introduced Collins to the idea of pursuing a Distinguished Badge. Collins admits that he had no clue what “going distinguished” meant. Bragg went over the terms – legging out, finishing “first leather” and other related expressions.
In 2015, Collins went to the National Matches at nearby Camp Perry, Ohio, and fired in his first President’s Rifle Match. Watching the elite shooters take their final shots inspired Collins: “Learning about the Distinguished Badge, learning about the President’s Match — I just knew that I had to get this Distinguished Badge on my way to, hopefully, getting into the President’s 100 or even the Top 20.” So Collins began traveling to GSMM competitions with his match rifle in tow, just to get in a little extra practice. It became his main focus. In June 2019, he earned his first set of six leg points at the CMP Viale Range 800 Aggregate and EIC Service Rifle Match at Camp Perry. It was a breakthrough.
When I first started, I was shooting the Garand and the M1A. [But] once I realized I wanted to get my Distinguished Badge, I said, “None of the wood guns. It’s all my match rifle until I go Distinguished”.
He went on to earn eight points at his next match in July, followed by eight more in August. With one more match left in 2019 and only seven points away from the required 30 to earn a badge, his goal was within sight. But it wasn’t until the EIC match at the Washtenaw Sportsman’s Club in Ypsilanti, Michigan, in July 2020 that he was able to conquer his nerves and earn his final points: “The most rewarding thing – it’s when you get there. When you finally earn it, everybody knows it. Everybody at the range celebrates with you. All of your friends are there with you. It’s just rewarding in itself. You’re part of that tradition that spans three centuries.”
Friendships Made on the Road to Distinguished
More so than the time, effort, and skill it took to earn the badge, the journey to become Distinguished was almost as rewarding as the badge itself for Collins, given the relationships he’s made along the way:
“These guys I’ve met and hung out with — we’ve given jobs to each other, we celebrate each other’s birthdays, we know each other’s families. It’s just been a great group of guys. You always are rooting for your friends, regardless of how well you’re doing. If you’re doing bad, you root for them even more.”
Distinguished Badge-Earning Marksmen Will Be Honored in 2021 at Camp Perry
Part of the tradition of earning a Distinguished Badge is walking across the stage at Camp Perry during the National Matches award ceremony. There, badge winners are formally pinned by their peers on a stage that has felt the footsteps of prominent marksmen for over a century.
“Last year, when I got the first points, I told myself, ‘I’m going to walk this stage at Perry next year'”. Collins and all others who earned a Distinguished Badge in 2019 or 2020 will still have the opportunity to take the stage next year at the 2021 National Matches — and that’s just what Collins plans to do.
With the 2020 Presidential election just 65 days away, and more riots in the streets, it may be time to think about getting that AR-platform rifle. Getting it while you still can. Democratic Party nominee Joe Biden and his VP candidate Kamala Harris both support banning of AR-type rifles. And Biden and Harris have praised Canada’s sweeping semi-auto gun ban carried out by Prime Minister Trudeau through dictatorial executive action (without parliamentary approval). The official Democratic Party Platform includes these provisions:
— Banning the manufacture and sale of ARs and modern sporting rifles
— Halting and criminalizing online firearm and ammunition sales
— Forcing states to require licenses for owning any firearms
— Instituting delay processes for background checks
— Criminalizing private firearm transfers
And during her Presidential campaign (before she was selected as Biden’s VP), Kamala Harris declared: “Upon being elected … I will give the United States Congress 100 days to get their [sic] act together and have the courage to pass reasonable gun safety laws. And if they fail to do it, then I will take Executive Action”. That’s a chilling threat…
Got the message? The Dems want your guns. And the first guns they want to take away are the “evil” black rifles. As Robert “Beto” O’Rourke said famously: “Hell yes we’re going to take your AR15″.
AR Purchase Option — Lower Receiver
The restricted part of an AR15 is the lower receiver. This is the section that must be purchased through an FFL, with a background check. You can later add an upper (or multiple uppers), which can be purchased directly from a supplier. But the lower is what you need. If you’re short on cash, but want to get an AR, grab a lower and then add a complete upper receiver later.
One leading vendor of AR lowers is Palmetto State Armory (PSA). PSA has plenty of stripped lowers and complete lower receivers in stock right now at attractive prices. Here are two offers on 8/29/2020:
Complete AR15 Lower Receiver — $209.99
This complete Palmetto State Armory lower receiver is fully assembled and ready for your complete Upper. This unit is machined from 7075-T6 Aluminum Forgings, hardcoat anodized. The lower comes with M4 Stock and Standard Carbine Buffer. The bolt and carrier fit .223 Rem/5.56×45 case heads.
Stripped AR15 Lower Receiver — $74.99
This PSA Stripped Lower Receiver is machined from 7075-T6 Aluminum Forgings, hardcoat anodized. It does NOT include trigger group and pins for operation. You must purchase those items separately. This is just the bare lower receiver.
This story is based on an article by Larry Keene of the NSSF
New Jersey Governor Phil Murphy has a new plan to deny the Second Amendment rights of NJ citizens — hit them in their pocketbooks, and hit them hard. Using the COVID-19 Pandemic as a pretext, Gov. Murphy, a Democrat, is calling for a massive increase in fees, taxes, and surcharges on gun owners:
1. Raise cost of Handgun Purchase Permit from $2 to $50 — 2400% increase.
2. Raise cost of Firearm ID Card from $5 to $100 — 1900% increase.
3. Raise cost of Handgun Carry Permit from $50 to $400 — 700% increase.
4. Raise fee for firearms manufacturer from $150 to $1500 — 900% increase.
5. Raise fee for firearms Retail Dealer License from $50 to $500 — 900% increase.
This shows how government taxes and fees can be aggressively used to restrict gun ownership. In California, another blue state run by a corrupt Democratic governor who likes to rule by Executive Order, we have myriad gun-related fees and taxes, and now must pay for a license in order to purchase ammo. This is how Democrats intend to use state taxing powers to defeat the Second Amendment.
Gun Control by Tax in New Jersey
Commentary by Larry Keene, NSSF
Democratic New Jersey Governor Phil Murphy is… proposing “stronger gun control” in the Garden State. This time, he’s using the COVID-19 pandemic to raise taxes on law-abiding gun owners and those wishing to exercise their Second Amendment rights. Now it will be up to the state legislature to approve or reject his new antigun proposals. New Jersey residents shouldn’t hold their breath as antigun Democrats control both chambers by wide margins.
More gun control has been a pillar for Gov. Murphy since he took office in 2018. In his first two years in office, he pushed for and signed into law 10 more-stringent gun control laws in a state already known for having some of the strictest gun laws in the country. In 2020, the spreading Coronavirus pandemic gave him an opportunity to do even more[.]
Five Million New Gun Owners in the USA in 2020
Nearly 5 million Americans … purchased a firearm for the first time this year. The reasons were all around us. Reports of local law enforcement becoming stretched thin, criminals being released from jails and quickly committing violent crimes again, and now more recently violent riots and looting in cities and cries of “defund the police” have increased.
Gov. Murphy, who now wants to levy more fees and taxes to close the COVID budget gaps, actively worked to keep gun buyers out of stores. He shut down firearm retailers and related businesses, deeming them “non-essential” at a time when they were most essential. He faced immediate backlash and lawsuits, leading him to backtrack and allow retailers to open again. Gov. Murphy tried explaining his reasoning, stating “I wasn’t thinking about the Bill of Rights”.
Raising Taxes as Means for More Gun Control
New Jersey is already known as a high-taxed blue state operating in the red. Now, to address next year’s budget shortfall and seeing an opportunity to further squelch the Second Amendment, Gov. Murphy proposed massive taxes and fees on firearms and ammunition[.]
Gov. Murphy’s proposed antigun increases include raising the handgun purchasing permit fee 2400 percent from $2 to $50; the cost of a firearm ID card by 1900 percent from $5 to $100; the price of a handgun carry permit 700 percent from $50 to $400; the fee for a gun retail dealer license by 900 percent from $50 to $500; and the fee for a firearm manufacturer 900 percent from $150 to $1,500. There are, or course, additional fee increases as well.
Anti-Gun Birds of a Feather
Gov. Murphy isn’t alone in using the pandemic to infringe on the constitutional rights of lawful Americans. Gov. Murphy’s northern neighbor, New York Democratic Gov. Andrew Cuomo, behaved similarly as did New Mexico Democratic Gov. Michelle Lujan Grisham. These three governors have something else in common. They all forced gun stores to close during the pandemic despite the Department of Homeland Security saying gun stores are essential business.
When your cases become hard to extract, or you feel a stiff bolt lift when removing a cartridge, it’s probably time to full-length size your cases, and “bump” the shoulder back. Short-range benchrest shooters, running high pressures, typically full-length size every load cycle, bumping the shoulder .001-.002″. The vast majority of mid-range and long-range F-Class shooters also full-length size every time. High Power shooters with gas guns should definitely full-length size every time, and may need to bump the shoulders .003″ or more to ensure reliable feeding and extraction.
Use Shims for Precise Control of Shoulder Bump
Some shooters like to set the “default” position for their full-length die to have an “ample” .003″ or .004″ shoulder bump. When they need less bump, a simple way to reduce the amount of shoulder movement is to use precision shims in .001″ (one-thousandth) increments. Sinclair Int’l offers a set of seven (7) shims for your standard 7/8-14 FL sizing dies for $14.99.
Sinclair explains: “Each shim is notched for easy size identification. Just set your die using one of the middle thickness shims. Adjustments can be made easily by changing shims to increase or decrease die depth without changing the stem setting. This is a great upgrade for non-micrometer adjustable dies.”
Here are reports from Forum members who use the shims:
“Great product. I have my die lock ring(s) adjusted for the shortest headspace length on my multiple chambers 6BRs and 6PPCs. When needing a longer headspace, I just refer to my notes and add the appropriate shim under the lock ring. Keep it simple.” — F.D. Shuster
Mats Johansson writes: “I’ve been using [shims] since Skip Otto (of BR fame) came out with them. I set up my dies with the .006″ shim, giving me the option of bumping the shoulder a bit more when the brass gets old and hardens while still having room to adjust up for zero headspace, should I have missed the original setup by a thou or two. Hunting rounds can easily be bumped an extra .002-.003″ for positive, no-crush feeding. Being a safety-oriented cheapskate, I couldn’t live without them — they let me reload my cases a gazillion times without dangerous web-stretching. Shims are a must-have, as simple as that.” — Mats Johansson
Brownells offers the seven-piece set of Sizing Die Shims that let you adjust the height of your die (and thereby the amount of bump and sizing) in precise .001″ increments. Sinclair explains: “Some handloaders will set their die up to achieve maximum sizing and then progressively use Sinclair Die Shims between the lock ring and the press head to move the die away from the shellholder. Doing this allows you to leave the lock ring in the same position. These shims are usually available in increments of .001″ and work very well.”
Seven Shims from .003″ to .010″
For use with 7/8-14 threaded dies, Sinclair’s $14.99 Die Shim Kit (Sinclair item 22400 or Brownells Code 749-001-325WB) includes seven shims in thicknesses of .003, .004, .005, .006, .007, .008, and .010. For ease of use, shim thickness is indicated by the number of notches cut in the outer edge of each shim. Even without looking you can “count” the notches by feel.
NOTE: These shim sets can also be use to adjust bullet seating depth for dies that lack micrometer adjustment. Use the same 7/8-14 shims with your non-micrometer seating dies.
Shims for Arbor Dies
Do you seat with an Arbor Press? No problem…
Brownells offers a $14.99 10-shim Arbor Die set for use with L.E. Wilson seating dies employed with arbor presses. Frankly we prefer micrometer-top Wilson dies, but if you have the standard Arbor dies, these shims come in handy. Order either Brownells Code 749-001-370WB (.22 to .243 caliber) or Brownells Code 749-001-326WB (.25 to .30 caliber).
Thanks to our Forum members, we’ve found sources for some of the most popular reloading powders for rifle accuracy cartridges. Handloaders know that powders such as Varget, H4350, H4895, H4831SC, H1000, Reloder 16, Reloder 23, and N150 are often in short supply. And it seems like Varget has been near impossible to find in recent months. As of Friday, August 28, 2020, here are some sources for many of these hard-to-find powders.
Hodgdon Varget 1-pound
Source: Powder Valley
NOTE: Varget 1-lb in stock; 8-pounders still out of stock
UPDATE 8/29/20: SOLD OUT — Our Members got the last of it.
Hodgdon H4350, 1-pound and 8-pound
Source: Powder Valley
Source: Midsouth Shooters
NOTE: Powder Valley has BOTH the 1-lb and 8-lb H4350 containers in stock. Midsouth has the 1-lb H4350 only.
Alliant Reloder 16 1-pound
Source: Powder Valley
NOTE: Reloder 16 1-lb in stock; RL16 8-pounders still out of stock
Hodgdon H4831SC, 1-pound and 8-pound
Source: Powder Valley
NOTE: Powder Valley has BOTH the 1-lb and 8-lb H4831SC containers in stock.
Hodgdon H1000 1-pound
Source: Powder Valley
NOTE: H1000 1-lb in stock; H1000 8-pounders still out of stock
Vihtavuori N150 1-pound and 8-pound
Source: Powder Valley
Source: Midsouth Shooters
NOTE: Powder Valley has N150 1-lb and 8-lb in stock. Midsouth has the 1-lb N150 only.
Where to Find IMR 4166 Powder
ELEY is excited to launch its brand new ELEY Precision Club, allowing competitors from all over the world to compete against each other from their local shooting clubs. Scores will be tallied online through an exciting Masters series of events. Winners can be recognized as a World Champion. In addition, top shooters compete for valuable cash, ammunition, and clothing prizes.
Shims for Arbor Dies
