Specialty Pistols — Report from Ernie Bishop in Wyoming
For those who know of me in the shooting world, you would probably know me in one of two ways: Dealer for SEB Rests or someone who does most of his competing, varminting, and or hunting with specialty pistols. These are typically bolt-action, single-shot rigs that can be used with a bipod. They can seem very similar to a pistol-grip rifle, but without a conventional buttstock.
My interest in all things specialty pistols (Remington XP-100, TC Contender, MOA Maximum, Pachmayr Dominator, H-S Precision HSP, etc.) goes back to the early 1980s. Most of the specialty pistols listed are no longer made, so when I discovered that Kauger Arms was making two, I was excited. I have not had much time to shoot my new Kauger “Black Widow” chambered in 6.5×47 Lapua. But so far, the experience has been fun, even though I have not taken it prairie dog shooting yet or hunted big game with it. For this report, I went to my friend Dan’s place as one can load in the house, and simply shoot off his back porch.
When thinking of a precision shooting platform, most of you would not consider a wood back porch as ideal. But we managed a 0.179″ 3-shot group at 100 yards using a Harris bipod and a small leather bag. Yes the Black Widow can shoot! My load was Lapua brass, Federal 205M primers, Varget powder, and the Hornady 123gr A-Max, with a MV of 2514 fps. I selected the Hornady 123s with prairie dogs in mind. As shown in the top photo, the scope on the Black Widow is a Sightron S-III 6-24 with a Holland’s scope level. The Black Widow also sports a Holland’s Radial Baffle brake.
Here is the Black Widow with a different scope base and scope, ready to go on Dan’s porch.
The day we planned to shoot prairie dogs was windy, so we headed to public land nearby and set up steel to get ballistics drop info and simply to play at distance. We had 5″ steel at 220 yards, 10″ steel (diamond) at 510 yards, and 10″ steel (square) at 650 yards. Wind was from 8 mph to just over 20 mph, so the little 123 grainer was getting tossed about, while keeping us humble all at the same time. Regardless of the gusty winds, I considered the session a success!
Kauger Arms has been making parts for a number of companies in the firearm industry for over 20 years. In 2014 when things slowed down for them, they decided to start building rifles and decided to make their own actions. Good decision — these actions, which are machined in a single process to keep everything true to the bore, are great. Bolt manipulation with Kauger’s action is the smoothest I have ever experienced.
Tim Kauger explained features of his actions to me. The Kauger cock-on-opening action has a Rem 700 footprint for action holes and trigger shoe. The semi-coned bolt features a floating bolt head which is slightly smaller than the bolt body. The firing pin assembly is 1/4-turn removable. There are user-changeable bolt body and knob options. There is a side bolt release above the stock line. All moving surfaces are nitrided. This can be ordered single shot, feed rails or DBM cut. Also the long action will accept up to a .338 Lapua/.300 Norma Mag if ordered that way (with 1.25″ barrel cylinder).
Kauger Arms offers a right-hand or left-hand grip, which is very comfortable. I shot the Black Widow both right-handed and left-handed with no problems whatsoever. Kauger Arms can build the Black Widow in many more chamberings than the two that are listed on the KaugerArms.com website.
New left-bolt/left port action from Kauger Arms — To the specialty pistol shooters reading and to those considering entering the SP world, Kauger Arms has listened to your requests and is working on a left bolt/left port short action that will be offered either as a single-shot action or with bottom metal. You grip the pistol with your right hand, then run the bolt with your left-hand.
Specialty Pistol 2 — The Camo .223 Remington HSP
Here is another one of Ernie Bishop’s specialty pistols. This eye-catching camo-stocked rig was crafted by H-S Precision. Sadly, H-S Precision is not making these HSP pistols anymore. This .223 Remington features a 1:7″-twist, 15-inch-long H-S barrel fitted with the “H” Brake. On top is a Burris XTR-III 5.5-30x56mm scope with SCR 2 MIL reticle and Burris rings.
Great Results with Varget + 77gr Sierra TMKs
Ernie tells us: “For a load, I have been running Lapua brass, Rem 7.5 primers, Varget, and the 77 grain Sierra TMK. Muzzle Velocity is 2675 FPS. As you can see, it shoots pretty well. Shown at right is a measured 0.265″ 3-shot group at 100 yards, shot from Harris bipod and small field bag.
Previous to this, I was shooting Federal Match ammo with the 77 grain SMK (MV was 2500 fps), with prairie dog kills past 600 yards, and have played on steel out to 1000 yards. This H-S specialty pistol is great for young or old alike, for novice shooters or experienced shooters. Everyone needs a fast twist .223 Remington!”
Here is my friend Dan shooting the .223 Rem HSP with factory ammo during a prairie dog trip.
With all the grim Pandemic news these days, here’s something to take your mind off the Coronavirus. We offer some some mighty impressive trick shooting by a very talented young lady. In this video, Kirsten performs a classic Annie Oakley trick shot, cutting a playing card in half with a bullet. We hope this display of marksmanship brings a smile to our readers on this Easter Sunday 2020.
Kirsten Joy Weiss is a phenomenal off-hand rifle shooter. Splitting a playing card would be hard enough with a scoped rifle shot from the bench. But Kirsten makes this amazing shot from standing position, shooting over iron sights, with an inexpensive rimfire lever gun. Trust us, that’s not easy. It did take Kirsten three tries, but we’re still impressed.
To accomplish this trick shot, Kirsten’s horizontal aim had to be ultra-precise. A playing card is only 0.25mm thick (about 1/100th of an inch). That leaves almost no room for error.
GIF Animation Shows Bullet Slicing Card in Half:
We know top benchresters can put five shots in one ragged hole at 100 yards, used a scoped rifle sitting on a stable rest. But make those folks stand on their hind legs, hold the rifle, and aim over primitive iron sights, and some of those benchrest aces would be lucky to hit a dinner plate at 100 yards. Kudos to Kirsten for making this great shot.
In response to the growing number of first-time gun buyers during the Coronavirus outbreak, the NRA’s Education & Training Division is offering four new Online Gun Safety Courses that can be done online at home. The Four New NRA Online Gun Safety Courses ARE:
1. Gun Safety Seminar
2. NRA Basic Pistol Shooting Course — Distance Learning
3. NRA Basic Rifle Shooting Course — Distance Learning
4. NRA Basic Personal Protection In The Home Course — Distance Learning
Each course, lasting from one to eight hours, is available online at NRAInstructors.org. To Access the 0nline training options, first CLICK HERE. Then under the Heading “DISTANCE LEARNING”, you will see options. CLICK the small gray box at the left of the title to select the course. IMPORTANT — Next you MUST SCROLL to the bottom of the NRA webpage to SEARCH. Select your state or Zip code, then you will get a list of the moderated online courses in your area.
Here is the Procedure to Follow:
1. CLICK HERE to Access ALL Course Listings
2. Select a “Distance Learning” Course.
3. Scroll Down and SEARCH for your State or Zip Code.
4. Review Course Dates and Times.
For example, here are the listed NRA online safety courses for California only. Elsewhere (in other states), YOUR list will be different!
“These courses will provide an option for first-time gun owners who don’t have the ability to take an NRA certified instructor-led class at their local shooting range at this time,” said Joe DeBergalis, Exec. Dir. of NRA General Operations. “While there is no replacement for in-person, instructor-led training, our new online classes do provide the basics of firearm safety training for those self-isolating at home.”
Though range time is an important part of the classes, there is still a wealth of knowledge available in the online programs. “The NRA recommends that all new gun owners seek professional training at the range, but that doesn’t mean you can’t get a head start on learning the basics of firearm safety at home. Taking one of these classes moderated by a certified NRA instructor, can only make you safer…” DeBergalis added.
Given the Coronovirus Pandemic, many Americans are looking to acquire handguns for personal protection, both in the home and while away from the house. Thus, many folks are looking for slim, relatively lightweight pistols that can be carried comfortably and discretely. There are dozens of carry guns on the market currently. But our friends at GunsAmerica.com have recently reviewed three of the best “micro-compact” 9mm pistols: SIG Sauer P365, Smith & Wesson Shield, and the Glock 43.
Note: There seem to be some connection issues with GunsAmerica on 4/11/20.
After looking at a variety of factors, including accuracy, reliability, ergonomics, build quality, size/weight, and price, GunsAmerica’s tester Jeff Cramblit concluded that the SIG P365 was the best of the three: “Bottom Line — The SIG P365 wins this shootout in my humble opinion. The MSRP of $599 is a bit higher than the other guns but SIG brings a bit more to the game. The outstanding grip design, higher capacity, great sights, lighter trigger pull, smaller length, light weight and just a great overall feel make it a winning product. The other two guns are great, they have been the cornerstones of concealed carry for many years, and I have personally carried both of them, but SIG has changed the game.”
Choosing a Carry Pistol — Performance, Reliability, Value
This Editor owns two SIG Sauer pistols, a P226 and P232. Both are “old school” metal-framed handguns. I can attest to their quality and reliability over many years. So I’m not surprised to see that SIG’s new P365 took top honors in this recent test. But I also think the Smith & Wesson Shield also offers excellent value for the dollar. The S&W 9mm Shield is ON SALE now for $289.99 at Palmetto State Armory.
This YouTube Video Compares the SIG P365 and the S&W Shield
Accuracy with Various Ammo
In the GunsAmerica Test, the SIG P365 had the best accuracy, based on five (5) different types of 9x19mm ammo shot off-hand at 25 yards. The SIG’s average 5-shot, 25-yard group size was 1.45″, vs. 1.7″ for the Glock 43, and 2.1″ for the S&W Shield. The P365’s accuracy edge may be due in part to its lighter, 5.1-lb trigger pull compared to 6 lbs. for the S&W Shield, and 6.25 lbs. for the Glock 43.
Dimensions — Width and Weights
Size matters — particularly when it comes to a carry pistol. The S&W Shield is the narrowest of the three guns at 1.03″ wide vs. 1.11″ for the P365 and 1.36″ for the Glock 43. Though it has the highest round capacity, the SIG P365 actually has the smallest grip circumference and grip depth. Weight-wise, the Glock 43, at 18 oz. unloaded, is the lightest. The SIG P365 is 18.8 oz., while S&W Shield is the heaviest at 20.5 oz. weight.
Capacity — SIG P365 Has the Edge
The SIG P365, holding 10+1 rounds, has the highest ammo capacity. This is remarkable as the P365 has the smallest grip circumference of the three pistols. Kudos to SIG for clever design. The S&W Shield has an 8+1 capacity, while the Glock 43 only holds 6+1. Advantage SIG.
AR-platform rifles are fun and versatile, but the standard, mil-spec triggers leave much to be desired. They tend to be gritty, with creep and heavy pull weight. One of the easiest, most effective AR upgrades is a trigger group swap. An improved fire control group makes a huge difference. There are many aftermarket trigger options for the AR platform rifles. Choose single-stage or two-stage, either standard trigger assembly or unitized “drop-in” trigger, such as those made by Timney or Triggertech.
When upgraded with a precision trigger and match barrel, AR-platform rigs work great in NRA High Power competitions (Photo from NRA Blog, at Camp Perry).
Two-Stage vs. Single-Stage Triggers
Two-stage triggers have two separate movements. The first stage offers a light, spring-loaded pressure that works against the shooter’s pull until stopping at the second stage – this is called “take-up”. If there is no spring pressure, it is known as “slack”. Should the shooter continue to pull the trigger once he’s arrived at the second stage, the mechanism will operate like a single-stage trigger from there until engaging the sear and firing the gun. Some shooters prefer a two-stage trigger because it allows a mental preparation (first stage) before the final decision to “break the shot”.
Single-stage triggers feature no take-up or slack, as they begin engaging the sear as soon as the shooter begins pulling the trigger. Some competitive shooters prefer the two-stage trigger because of the feedback it provides during its first stage, while other shooters, including those using their rifle in tactical scenarios, may want the surety of a single-stage trigger, ready to engage and fire once their finger is inside the trigger guard. Regardless of preference, a good trigger will feature minimal creep and should be free of grittiness, providing a smooth, even break.
Drop-In Trigger Assembly vs. Standard Trigger Group
Once you decide between a single-stage or two-stage trigger, you can choose between standard and drop-in trigger groups. Standard trigger groups feature all the fire control group parts separated, and need to be pieced together and installed much like a mil-spec trigger, while drop-in trigger are pre-assembled and contained within a casing that simply drops in to the receiver and accepts the pins, hence the name.
After-Market Trigger Comparison
Some shooters prefer drop-in triggers due to the ease of installation, while others opt for standard groups so they can access the components individually for cleaning adjustment or replacement. If one piece of a drop-in trigger fails, you’ll need to either replace the entire unit or send it to the manufacturer for repair, whereas you may be able to simply replace the broken component of a standard trigger without needing a whole new trigger set.
Trigger Terminology — “Creep”, “Stacking”, “Overtravel”
“Creep” or “travel” is the distance the trigger moves between the end of take-up and when the trigger breaks to fire the fun. Too much creep can affect accuracy, but no creep can be unsafe, as the shooter may not be prepared to fire. “Stacking” occurs when the trigger weight actually increases during travel — this shouldn’t happen. Lastly, “overtravel” is the distance the trigger continues moving back after the gun fires.
This article is based on a longer story in the NRA Blog.
“Garbage In, Garbage Out.” You have to input key variables with precision if you want your Ballistics Apps to deliver reliable long-range trajectories. So says Tom Beckstrand, Field Editor for Guns & Ammo magazine. A former U.S. Army Special Forces Officer, and avid long-range competitor, Beckstrand knows the importance of using your ballistic calculator correctly. Here are his tips on how to achieve the best results using Ballistics Calculators.
“The most important inputs to make any ballistic calculator work correctly are muzzle velocity, ballistic coefficient, and sight height,” says Beckstrand.
Ascertain Accurate Muzzle Velocity with a Good Chronograph
“Cheap chronographs will not give an accurate muzzle velocity, so the serious shooter needs to spend the money on a quality chrono.” When you chronograph, make sure to measure the distance from the muzzle to the chrono unit. That input is also important to your Ballistic calculations.
Use Reliable G1 and G7 Ballistic Coefficients
Beckstrand added, “Ballistic Coefficients are available from ammunition and bullet manufacturers, and most of these coefficients the manufacturers provide are really quite accurate.” Ballistic Coefficient or BC, is a number that reflects how well a bullet cuts through the air. The higher the BC, the less the bullet is affected by air drag.
Measure Sight Height Correctly Using Calipers
Beckstrand has found that many shooters aren’t inputting sight height or they are guessing at the correct height. As target distance increases, just a half-inch of sight height inaccuracy can mean several inches up or down.
“Sight height is the input most often overlooked and is usually the source of greatest error. I think a lot of shooters, especially those new to long-range shooting, simply don’t understand the importance of this input.”
Sight height is the distance from the centerline of the scope to the centerline of the bore. Some shooters, Beckstrand believes, just “eye it up” and estimate the distance. “Really, you should use a set of calipers to measure the sight height distance … within 0.1 inch”.
This Video Explains How to Set Up and Use Ballistic AE:
Need a top-notch Ballistics App for your iPhone, iPad, or iPod? Start with Ballistic AE, the number 1 (i.e. most installed) App for iOS systems. Ballistics AE (Advanced Edition) is the most popular iOS ballistics program for many good reasons. Full-featured and easy to use, Ballistics AE has been refined over many years, and it supplies rock-solid solutions derived from JBM Ballistics solver (created by James B. Millard). Unlike some other Apps, Ballistics AE is STABLE on iPhones (with various OS levels). What’s cool is that Ballistics AE is now on sale for just $9.99.
We’ve used the Ballistic AE program on an iPhone 5S, iPhone 6, and iPad, and it performed well. Here are some of the features we liked:
1. Mirrors output from online version of JBM Ballistics we often use for initial calculations.
2. Controls are simple to use and (mostly) intuitive.
3. Handy comparison feature lets you compare ballistics for different projectiles side by side.
4. Advanced Wind Kit allows you to account for complex wind situations.
5. Projectile and BC Databases are very comprehensive.
6. Software is regularly updated to match Apple OS changes.
Fort Scott Munitions produces 9mm Luger ammo with lead-free solid copper bullets. Shown here is specialized subsonic ammo designed to be used with a suppressor. See FortScottMunitions.com.
The 9mm Luger, aka 9x19mm, is the most popular ammunition type for semi-automatic handguns. As such, with panic buying caused by the Coronavirus pandemic, 9mm ammo is becoming harder to find — or the ammo vendors have jacked up their prices. We found most of the bulk 9mm FMJ out of stock. However, you can still find defensive hollowpoint ammo.
Thankfully, many large vendors such as Brownells, Natchez, and MidwayUSA still have 9mm pistol ammo in stock at reasonable prices. If you can’t find what you need from these vendors, you can source many other ammo retailers via AmmoSeek.com. In addition, Sportsman’s Warehouse has limited 9mm ammo for in-store pick-up in some stores (search online for particular store availablity).
Here are three leading sources for 9mm Luger (9x19mm pistol) ammo. Natchez still has bulk, lower cost lead-core FMJ ammo. Elsewhere cheap 9mm FMJ is mostly sold out, but you can still get 20- or 25-round boxes of defensive ammunition. This stuff is expensive for target practice, to be sure, but at least it can be found.
1. MidwayUSA 9mm Ammo in Stock
Midway USA has quite a bit of hollow-point 9mm luger defensive ammo Available. CLICK HERE to see items in stock, or go to the Midway USA home page and search for “9mm Luger Ammunition”.
2. Natchez Shooters Supplies 9mm Ammo in Stock
As of the time of publication, Natchez Shooters Supplies still has large 1000-round boxes of 9mm FMJ ammunition from CCI and Fiocchi. If you want big quanities of target practice ammo — grab these while you can. In addition, Natchez has NovX defensive ammo.
3. Brownells 9mm Ammo in Stock
Brownells still has a limited selection of 9mm Luger ammunition in stock. Most of the cheaper bulk 9mm is sold out, but here are a few of the brands available on April 10, 2020 at time of publication.
Need a 9mm Pistol? Consider the Walther Creed — Great Value
Need a 9mm carry pistol? The Walther Creed offers excellent ergonomics, good accuracy, and well-designed controls at a killer price — $269.99 at CDNN Sports. This gun, designed to be a value-leader, emulates Walther’s more expensive PPQ model (MSRP $649.00) at a much lower price. The Creed’s frame size and shape is the same as the PPQ, but the Creed lacks interchangeable backstraps. Slide and trigger are very similar. The Creed features a snag-free bobbed hammer. Testers have praised the new Creed, saying that, despite the bargain price, it “sacrifices little to nothing in… ergonomics, accuracy, and reliability.”
As folks are stuck at home with the Pandemic lock-downs, many guys are thinking about projects involving their AR-15s sitting in their safes. We’ve seen some threads in our Forum asking about the .224 Valkyrie, an AR-centric cartridge that offers significantly better long-range performance than the .223 Remington (5.56×45). If you own a .224 Valkyrie, or are thinking about adding a .224 Valkyrie upper to your MSR (Modern Sporting Rifle) arsensal, here is load information from industry leaders Hodgdon and Sierra.
With the 90gr SMK (or similar High-BC projectiles), the .224 Valkyrie offers ballistics similar to the 6.5 Creedmoor but with significantly less felt recoil.
Hodgdon has reloading data for the .224 Valkyrie, a popular new cartridge optimized for the AR15 platform. “At Hodgdon, we’ve been researching this cartridge since before its introduction and are excited to release load data for the Valkyrie featuring powders like Hodgdon CFE 223, IMR 8208 XBR, and Hodgdon Varget” reports Ron Reiber, Hodgdon product manager/ballistician. Access the .224 Valkyrie Data via Hodgdon’s Reloading Data Center.
While new load data will continue to be updated, there is currently data for 80 different loads with bullet weights ranging from 50 to 90 grains. NOTE: The load data covers Hodgdon, IMR, and Winchester brand powders only. See Sierra Data for other powder brands. Bullet brands included are: Federal, Hornady, Nosler, Sierra and Swift.
About the .224 Valkyrie Cartridge
Basically a 6.8 SPC necked down to .22, the Valkyrie has a shorter case than the .223 Remington (and 5.56×45 NATO). This allows you to load the longest, heaviest .224-caliber bullets and still feed reliably from an AR15-type magazine. Designed to rival the .22 Nosler while still running well in ARs, the .224 Valkyrie offers excellent long-range performance when loaded with modern, high-BC bullets. We expect some bolt-action PRS shooters might adopt the .224 Valkyrie. Why? Reduced recoil. With the 90gr SMK, the .224 Valkyrie offers ballistics similar to the 6.5 Creedmoor but with significantly less felt recoil.
The new .224 Valkyrie has already developed a loyal following: “Shooting heavier bullets in an AR-platform rifle that maintain supersonic speeds beyond 1,300 yards has captured the interest of shooters and handloaders everywhere” — Hodgdon Powders
Our friend Gavin Gear of Ultimate Reloader.com found a superbly accurate load with Berger 80.5gr bullets.
IMPORTANT: Check Out Sierra’s .224 Valkyrie DATA
Sierra Bullets has also published extensive load data for the .224 Valkyrie. This covers over a dozen powder types — many more than the Hodgdon database. Sierra’s .224 Valkyrie load data covers projectiles from 50 grain all the way up to 95 grains. With the 90 to 95 grain bullets, the little Valkyrie can give 6mm match cartridges a real run for their money — offering similar ballistics with less recoil. When selecting a barrel for the long .224-cal bullets, specify a fast enough twist rate: “Sierra recommends a 1:6.5″-twist barrel for the #9290 22 cal 90 gr HPBT bullet. However, for cartridges like the Valkyrie, that can push them over 2650 fps muzzle velocity, a 1:7″-twist barrel will stabilize the bullet correctly.”
Due to concerns about the Coronavirus Pandemic, large numbers of Americans are acquiring firearms for self-protection. Many of these citizens are purchasing a gun for the first time. It is important that these new gun owners learn about gun safety and responsible gun storage.
The National Shooting Sports Foundation (NSSF) has released a new Infographic for first-time gun owners. If you recently purchased your first firearm, we recommend you review this document. Additionally NSSF released a new Firearm Storage and Safety Assessment Quiz. This walks gun owners through questions related to safe handling and storage of firearms. The Quiz also links to helpful gun safety resources.
Below is the latest NSSF Infographic for new gun owners. This provides questions to ask before buying a gun, plus information on safe gun storage at home. This Infographic is part of a large collection of NSSF Resources for New Gun Owners. Among those resources you will find links to gun storage options, training videos, guidance on talking to children about gun safety, and much more.
Here’s the NSSF Infographic for New Gun Owners. CLICK HERE for the Interactive Version. On that Interactive PDF, click on the smaller buttons to get additional information, or to watch related videos.
Sadly, this year the “Zombie Pandemic” 3-Gun match in Nebraska has been replaced with a true health pandemic, one of the greatest challenges facing the United States since WWII. Due to the public health measures in response to the spread of the Coronavirus. The event organizers issued this statement:
“The Hornady 2020 Zombies in the Heartland 3-Gun Match has been canceled due to the ongoing challenges presented by COVID-19. Although the match wouldn’t have taken place until May 28-31 at the Heartland Public Shooting Park in Grand Island, current health and safety protocols would have precluded preparing the range for the event. Hornady and the Heartland Public Shooting Park plan to resume the battle against the zombie scourge in 2021.
Refunds will be issued by the City of Grand Island to all registered shooters, but please be patient as this will take some time. Hornady is also working with companies to return prizes and cash sponsorships. Should there be any questions, please contact the shooting park directly.”
About the Zombies in the Heartland Match
For many years, Hornady has hosted the popular Zombies in the Heartland event. This “Pandemic” 3-Gun fun match, one of the biggest three-gun shoots in the nation, was to be held at the Heartland Public Shooting Park in Grand Island, Nebraska. The Pandemic traditionally has a rich prize table worth over $150,000. Prizes included pistols, rifles, shotguns, scopes, AR uppers, gun parts, and gear of all kinds.
The Pandemic was a veritable theme park for shootists, with many fun stages and innovative targets. Many unique, reactive zombie targets were developed specifically for this match. The use of paper targets was minimized — so it was mostly “bang and clang”.
Shotguns, rifles, and handguns were used on most stages, which feature handgun targets from 1-15 yards, shotgun targets from 10-20 yards, and rifle targets from 1-200 yards. There were also side matches with full-auto demo firearms, exploding targets, specialty targets.
This video from 2017 offers a Shooter’s POV views of many stages including full auto:
Operated by the Grand Island Parks and Recreation Department, the Heartland Public Shooting Park is the largest and most complete public shooting facility in the Midwest. For more information, call 308-385-5048.
The day we planned to shoot prairie dogs was windy, so we headed to public land nearby and set up steel to get ballistics drop info and simply to play at distance. We had 5″ steel at 220 yards, 10″ steel (diamond) at 510 yards, and 10″ steel (square) at 650 yards. Wind was from 8 mph to just over 20 mph, so the little 123 grainer was getting tossed about, while keeping us humble all at the same time. Regardless of the gusty winds, I considered the session a success!
Great Results with Varget + 77gr Sierra TMKs
Dimensions — Width and Weights
About the Zombies in the Heartland Match
