Forum members are lamenting that they can’t find Hodgdon H4350 at local gunstores or through major online Vendors. There ARE a few shops that do have H4350 (and Varget) on the shelves. But the nearest H4350 may be in another state, far away. Therefore, you may want to consider using Alliant Reloder 16 (RL16). We highly recommend Reloder 16 for shooters who can’t find H4350. RL16 has a very similar burn rate, excellent accuracy, and is VERY temp stable. Some ace F-Class shooters (among Top 10 at Nationals) tell us that, with hot ambient temps (80-100+° F), RL16 is even more temp stable than H4350.
Powder Availability at Online Vendors — H4350, Reloder 16, Varget
*This is available in-store only at a few locations. You need to search store locations near you for availability. For example, H4350 8-pounders are available in a couple locations including Show Low, AZ and Midvale, UT. Varget 8-pounders are available in AZ, NM, and WY and a couple other states.
Do You Like H4350? Then You Should Try Reloder 16 — It Is Accurate and Temp Stable
Alliant Reloder 16 is used now by many top shooters for cartridges that work well with Hodgdon H4350. In fact, we’d say that Reloder 16 is the best substitute for H4350 on the market. Alliant’s RL 16 is very temp stable, offers good velocity, and the accuracy is top tier. Some guys report slightly better accuracy than H4350 in the .284 Win, .260 Rem, 6.5 Creedmoor, 6mm Creedmoor, and 6XC cartridges. If you currently use H4350, you should definitely give Alliant Reloder 16 a try. The powder also boasts excellent lot-to-lot consistency and contains a proprietary de-coppering additive.
This is NOT just a slower version of Alliant’s double-based Reloder 15 (which words great in the 6mmBR and Dasher cartridges). Reloder 16 is a completely new formulation, produced in Sweden by Bofors for Alliant. Reloder 16 utilizes TZ technology, which manipulates the response of the propellant and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures. As a result, Alliant’s Reloder 16 offers truly outstanding temperature stability.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. MidwayUSA Padded Shooting Mat, $74.99 on Sale
This padded MidwayUSA mat is much more comfortable than typical shooting mats. With 1.5″-thick high-density foam, this is way better for knees and elbows than typical roll-up mats. For your home range, this is a good choice. On sale now for $74.99, this thick mat folds into three sections. It stows flat and fits nicely in the back of a truck or SUV. Actual owner comments: “If you like to be COMFORTABLE … I can highly recommend it! Easy on the elbows. Easy on the knees. Easy on the belly. You can even kneel on it comfortably, even when the surface is rock-hard!”; “I tell you what … Do yourself a favor and spend the few extra dollars on this unit. Highly recommended.” MORE REVIEWS HERE.
2. EuroOptic — Leica 8×42 Geovid LRF Binoculars, $1150 Off
If you’re looking for outstanding glass plus great rangefinding capabilities, the Leica Geovids are among the best you can buy — at any price. Right now save over $1000 on the Leica 8×42 HD-B 3000 Geovids at EuroOptic. These are being marked down to $1799.00 because Leica has introduced a new “smart” Geovid 3200.com model that communicates with a Ballistic App. That new 8×42 Geovid 3200.com starts at $2949.00, so you can save big bucks by buying the previous model. Last year’s 10×42 Geovid is also on sale now for $2499.00.
3. Natchez — ChargeMaster Lite Powder Dispenser, $209.99
Precise powder dispensing is critical for accurate loads. Among the many electronic scale/dispensers on the market, RCBS’s ChargeMaster Lite is a very good choice. This week Natchez is selling the ChargeMaster Lite for only $209.99. That’s a great price — almost $60 cheaper than Amazon. Note: Natchez also offers $5 Shipping with $99+ orders through 2/4/2020 with Code FR200201.
4. Multiple Vendors — 20% Rebate on Federal and Speer Bullets
Now through the end of April, if you purchase at least $100 worth of Federal and/or Speer bullets you can get 20% of the purchase price back. Minimum purchase is $100.00. Maximum rebate of $100 per person or household. Note: The Rebate amount will be calculated on the product purchase price only — that does NOT include taxes and/or shipping/handling fees. This Federal/Speer Rebate is valid for purchases made 02/01/2020 through 04/30/2020. View REBATE FORM.
5. Midsouth — Frankford Arsenal Rotary Tumbler Lite, $99.99
Lots of people love wet-tumbling their brass in stainless pins but not everyone want to do it in a giant unit. We found a sweet deal on the Frankford Arsenal Rotary Tumbler Lite. Midsouth has this unit on sale for $99.99. This tumbler is small enough to fit on a counter but still big enough to hold 300 pieces of .223 Rem brass. For folks on a limited budget who want to start wet tumbling, this is a solid choice.
6. CDNN — Ruger American .30-06 Hunting Rifle, $319.99
Even with so many new cartridge types, the venerable .30-06 Springfield remains a trusted and effective hunting round. Moreover, you can find good .30-06 hunting ammo at most any sporting goods store. Whether you’re looking for an affordable hunting rifle or perhaps a first rifle for a family member, check out this .30-06 Ruger American Rifle with Wolf Camo finish. CDNN’s current sale price is just $319.99 — a great bargain. One recent comparison test declared the Ruger American the best entry-level hunting rifle, and Ruger offers a rock-solid warranty.
7. Sportsman’s Guide — Buck Mark Camper UFX Pistol, $299.99
The Browning Buck Mark is a classic, and for good reason. These pistols are reliable, well-balanced, have a good trigger, and they are very accurate. And now you can get one for under $300.00. Sportsman’s Guide has the Browning Buck Mark Camper UFX with 5.5″ Barrel on sale for $299.99 ($284.99 member price). This Buckmark Camper UFX is a excellent value, especially for Club members who pay just $284.99.
8. MidwayUSA Dogtown Ammo, $21.25 for 50 rounds
Dogtown Ammo, made with Nosler tipped FB bullets, offers great “bang for the buck” for .223 Rem shooters, particularly high-volume varminters. Right now get 50 rounds for just $21.24 (43¢/rd). Or order 200 rounds for $86.99 (42¢/rd). Forum member NDAE15MAN states: “This stuff shoots in all of my .223 Rem guns — 7/8″ to 1″ at 100 yards. Best kept secret for ammo. Shoot exact same groups as Black Hills.” NOTE: MidwayUSA also sells .204 Ruger Dogtown Ammo with 32gr tipped flat-base bullets.
Here’s a great deal for varmint shooters with 17 HMR rifles. Midsouth has the Hornady 17 HMR brick of 500 for a low price of $89.99. That works out to just 18 cents per round — cheap enough that you can blast sage rats all days long and never worry about running out of ammo.
10. Amazon — Two Pairs Safety Eyewear, Cords, Covers, $13.50
Eye protection is important! All you need is one case separation or blown primer to cause serious eye injury. Don’t take that risk. Plus the CMP has made Eye Protection mandatory for all CMP Pistol and Centerfire Rifle events. Here’s a great kit with TWO Sets of safety eyewear, each with a neck strap and carry bag. These feature ANSI Z87.1-rated lenses that are anti-fog and scratch-resistant. The lenses also block harmful UV rays. Get the full SuperLite and SuperClear Lens Technology Kit for just $13.50.
With the Berger Southwest Nationals (SWN) taking place this week in Phoenix, we are reprising this discussing of rear bag designs and fill levels. By “tuning” your rear bag you can reduce hop on shot-firing and help your rifle track better. All that can translate to better scores, particularly with large-caliber rifles.
Tuning Your Rear Sand Bags
Over the years, noted gunsmith and a Benchrest Hall-of-Fame inductee Thomas ‘Speedy’ Gonzalez has learned a few things about “tuning” rear sandbags for best performance. On his Facebook page, Speedy recently discussed how sand bag fill levels (hard vs. soft) can affect accuracy. Speedy says you don’t want to have both your front and rear sandbags filled up ultra-hard. One or the other bag needs to have some “give” to provide a shock-absorbing function (and prevent stock jump). And you want to tune your fill arrangements to match your shooting style. Free recoil shooters may need a different fill levels than bag squeezers (who a softer bag but harder ears).
SAND BAGS & HOW TO FILL THEMby Speedy Gonzalez
I was asked several times by competitors at the S.O.A. Matches and F-Class Nationals as to how I fill my sand bags for benchrest competition. Here is a copy of a reply I gave several years ago:
Back in the old days, Pat McMillan told me: “You can not have two bags filled so hard that you gun bounces on them in the process of firing round at your target, especially if you have a rig with a very flexible stock. The bags must be set up in a manner for them to absorb the initial shock of the firing pin moving forward and igniting the primer.
Then [they must] maintain their shape and absorb the second shock wave as well the rearward thrust and torque of the rifle. What happens to the rifle when this is not done? Well let me tell you. The rifles have a very bad tendency to jump and roll in the bags. This causes many of those wild, lost shots that one can’t explain.”
Here’s some Good General Advice for Bag Set-up:
1. You should not have TWO hard bags [i.e. both front AND rear] in your set-up.
2. Heavy sand magnifies these phenomena.
3. If you are a bag squeezer, pack ears hard and leave bag pliable enough to squeeze for the movement required. You may pack front bag as hard as rules permit.
4. Free recoil shooters pack both bags firm, but not so hard as to allow stock jump. Especially if you have a stock with a very flexible forearm.
5. We use play-ground sand, also know as silica sand. I sift mine to get any large impurities out then mix it with 25% to 50% with Harts parakeet gravel to the desired hardness that I am looking for. The bird gravel keeps the sand from packing itself into that solid as a brick state.
Speaking of bricks — another thing that happens when shooters employ that heavy zircon sand is the ears form a low spot under them from recoil and then tend to rock back and forth with the rifle causing many low shots to crop up. Edgewood makes an Edgewood/Speedy rear bag specially reinforced under the ears to eliminate this scenario.
General Thoughts about Bag Construction and Ear Materials
I do not like the solid double-stitched leather bottoms. While this seems like a good idea, I see more shooters have problems because of them. They tend to slide around the bench and or slide with the rifle on recoil. The standard Protektor with Cordura rabbit ears and an Otto ring bag with a Cordura front would be what I would suggest to the new shooter or one of the Edgewood / Speedy rear bags, these mimic the “Donut” and feature a ring of leather around the bottom circumference that keep the bottom from rocking on the bench or ground[.]
One last note –If you use the Cordura bags, keep them sprayed with a good silicon spray or “Rain-Ex”. This keeps them from getting sticky. — Speedy
With the Berger Southwest Nationals commencing this week, we thought our readers would appreciate a showcase of two impressive, state-of-the-art F-Open match rifles. The first, show above, is the .284 RAHM (40° .284 Win Imp) with which Brian Bowling captured the 2019 F-Class Open Division Long Range National Championship. The second rifle belongs to barrel-maker Bryan Blake. Like Bowling’s rifle, Blake’s rig features a low-profile Cerus stock, but with purple highlights. Both rifles have 6-groove, cut-rifled barrels from Blake Barrel & Rifle and both sport Nightforce scopes.
Twin World-Class F-Open Rifles
Report from Bryan Blake of Blake Barrel & Rifle
We had been producing gun barrels for about 1.5 years prior to the 2019 NRA Long Range F-Class Nationals. Brian Bowling started shooting our 7mm barrels in May of 2019. Bowling and I are both on the Rutland team, Team Cerus, which has seven members. Bowling and I received the first Cerus XL stocks from Cerus Rifleworks in August of 2018. The stock was a very straight design.
With our barrels, these F-Open rigs can shoot! In 2018, Brian Bowling and I had the only two clean scores for the first match at the 1000-yard team NRA Nationals. In spring of 2019, I worked with Will of Cerus Rifleworks to see if we could come up with a lower center of gravity design to enhance what was already the straightest stock out there. We developed the Cerus XR stock which features stepped metal rails on the fore-end. I cut my XL Cerus stock and designed the rail system attached to the sides of the fore-end. Bowling’s stock (with black rails) was the second XR in the shooting world. On his very first weekend match at 600 yards he shot a 200-20X with the new XR stock and Blake 7mm 1:8.5″-twist barrel. He was using Berger 184gr 7mm bullets.
In 2019, at the NRA F-Class Long-Range Nationals, Brian Bowling won the F-Open National Championsship with a strong performance. He finished with a ton of Xs, three points ahead of the second place competitor. Before Brian’s impressive victory, we were told by many top shooters that a 6-groove barrel has never won any F-Class Mational event, and hypothetically never would. Well with Brian Bowling’s excellent shooting and reloading capabilities, we achieved a feat many said couldn’t be done.
Bowling’s Championship-winning rifle features a Bat Model B action in the Cerus XR stock. His Blake barrel is chambered for the .284 RAHM wildcat cartridge. This is a 40-degree (40°) version of the .284 Winchester. The .284 RAHM has a straighter case body compared to the original .284 Win.
We built Bowling’s rifle, doing everything except the final clear finish. We can do that work, but were short on time for the Nationals last year. We are proud of the chambering work we do and the quality of our bedding jobs.
Bryan Blake’s F-Open Rifle — the Purple XR
The Purple XR-stocked gun I shoot was built in August of 2019, right before the 2019 NRA F-Class Nationals. The natural wood is complimented by highlights finished with a bright purple metallic epoxy resin that Will from Cerus dreamed up. For this rifle we mated a BAT 3LL action with Blake barrels (switch-barrel configuration). Up front the fore-end rails are painted purple “plum crazy” to match the purple resin. The purple XR is finished with automotive “high solids” clear-coat, and block-sanded for a smooth, flawless look.
Blake’s Rifle is a Switch Barrel — 7mm and .30 Caliber
This Purple XR was set up to be a switch barrel rig, with both a 7mm BBM and a .30 BBM*. These BBM wildcats are based on shortened and straightened .300 WSM with a 40-degree shoulder. On my purple XR rifle as well as Bowling’s rifle, we employ Nightforce optics and load Berger bullets. These are the only glass and projectiles we use in our rifles.
The Purple XR is extremely accurate. Check out this 2.6″ group, shot at 1000 yards during a club match at the Ben Avery Range in Arizona. Yes, that is 1/4-MOA at 1K! Many folks would be very happy with that group at 600 yards. At 1000 yards it is remarkable. No, the rifle can’t do that every time. But this does demonstrate that the Purple XR is a tack-driver. CLICK HERE to see a 3.9 inch, 15-shot group at 1000 yards on the F-Class target (150-15X).
About Blake Barrel and Rifle — History and Barrel-Making Process
Blake Barrel and Rifle was re-launched in 2018. The business was actually started by my grandfather, Robert Blake, in 1966. In 1969 my grandfather stopped doing gunsmithing and making single-point cut-rifled barrels. He transitioned to doing industrial work, and less work for the public. After all those years he and my father, Dave Blake, kept the barrel-making equipment in storage. They kept the gun-drilling machines in the shop as they used them to drill long, deep holes in anything from aircraft parts to electric motor rotors.
In 2012 we got the diamond single-point, sine-bar rifling machine out of storage, along with the Pratt and Whitney double-spindle reaming machine. We then completely rebuilt and updated the equipment. We modified the gun-drill to be a counter-rotating drilling system. What that means is the drill spins at about 20% of the rotational speed, and the barrel at 80%. The counter-rotation keeps the drill on the center axis of the barrel more precisely than just rotating the barrel, or just rotating the drill. We are able to consistently drill holes in our barrel steel (primarily 416R) that at the end of a 33.25″ blank that is only .005″ off of center axis.
We then ream the barrels to be .0004″ below desired finish bore size. After the reaming process we mandrel-hone the bores to be .0001″ below finish bore size. This process eliminates reamer marks in the barrel bore. Therefore very minimal lapping is needed after rifling to remove any tooling marks. We then rifle the barrel to any twist rate we like. With a fine lap after rifling, the barrel has no tooling marks and all surface metal is flowing in the direction of the twist of the rifling.
* 7mm BBM stands for “Blake Bramley Magnum”. Dan Bramley and I developed that cartridge together in October of 2017. The .30 BBM is the “Blake Barrel Magnum”, which I developed in May of 2018.
Powder Moisture Content — Did You Know?
Variations in moisture content change the burning rate of a powder and thereby chamber pressures and muzzle velocity. The moisture content of the Vihtavuori N100 and N300 series powders is usually around 1%, while the N500-series’ normal moisture content is 0.6% because of the added nitroglycerine.
So what difference does moisture content make? Here’s an example. In a test, a [Vihtavuori] powder sample was dried by heating it, losing about 0.5 % of its weight. Cartridges were then loaded with the dried powder and fired using a pressure gun. Chamber pressures and muzzle velocities produced by these special cartridges were compared to those produced by cartridges loaded with untreated powder. (The powder charge and bullet were of course the same in both sets of cartridges.)
After Powder Drying:
Pressure Increased 11% from 320 MPa to 355 MPa
Velocity Increased 2.6% from 2526 to 2592 FPS
Comparing results showed chamber pressures increased from 320 MPa to 355 MPa with the dried powder, and the muzzle velocity increased accordingly from 770 m/s to 790 m/s (2526 to 2592 FPS). And note, this is only one example, of one caliber and loading. The difference might be much higher depending on the cartridge and loading combinations.
Recommendation: Store powder below 68°F in 55-65% humidity.
What does this tell us? Well, it seems we need to forget the old saying “Keep your powder dry”! Instead, focus on proper powder storage, at a temperature below 20°C/68°F and humidity between 55 and 65%. Safe reloading everybody!
Tech Tip sourced by EdLongrange. We welcome reader submissions.
Sometimes you’ll get a barrel that doesn’t stabilize bullets the way you’d anticipate, based on the stated (or presumed) twist rate. A barrel might have 1:10″ stamped on the side but it is, in truth, a 1:10.5″ twist or even a 1:9.5″. Cut-rifled barrels, such as Kriegers and Bartleins, normally hold very true to the specified twist rate. With buttoned barrels, due to the nature of the rifling process, there’s a greater chance of a small variation in twist rate. And yes, factory barrels can be slightly out of spec as well.
After buying a new barrel, you should determine the true twist rate BEFORE you start load development. You don’t want to invest in a large supply of expensive bullets only to find that that won’t stabilize because your “8 twist” barrel is really a 1:8.5″. Sinclair International provides a simple procedure for determining the actual twist rate of your barrel.
Sinclair’s Simple Twist Rate Measurement Method
If are unsure of the twist rate of the barrel, you can measure it yourself in a couple of minutes. You need a good cleaning rod with a rotating handle and a jag with a fairly tight fitting patch. Utilize a rod guide if you are accessing the barrel through the breech or a muzzle guide if you are going to come in from the muzzle end. Make sure the rod rotates freely in the handle under load. Start the patch into the barrel for a few inches and then stop. Put a piece of tape at the back of the rod by the handle (like a flag) or mark the rod in some way. Measure how much of the rod is still protruding from the rod guide. You can either measure from the rod guide or muzzle guide back to the flag or to a spot on the handle. Next, continue to push the rod in until the mark or tape flag has made one complete revolution. Re-measure the amount of rod that is left sticking out of the barrel. Use the same reference marks as you did on the first measurement. Next, subtract this measurement from the first measurement. This number is the twist rate. For example, if the rod has 24 inches remaining at the start and 16 inches remain after making one revolution, you have 8 inches of travel, thus a 1:8 twist barrel.
Determining Barrel Twist Rate Empirically
Twist rate is defined as the distance in inches of barrel that the rifling takes to make one complete revolution. An example would be a 1:10″ twist rate. A 1:10″ barrel has rifling that makes one complete revolution in 10 inches of barrel length. Rifle manufacturers usually publish twist rates for their standard rifle offerings and custom barrels are always ordered by caliber, contour, and twist rate. If you are having a custom barrel chambered you can ask the gunsmith to mark the barrel with the twist rate.
With miles of aisles and thousands of new products, the annual SHOT Show in Las Vegas is a near-overwhelming circus. There is so much to see, with scores of new products from around the globe. For this story, we start off with the official SHOT Show 2020 Day 4 Highlights video, a revealing look at the SHOT Show experience. Following that you’ll find six videos covering notable new products. Check out new Berger bullets, a new custom rimfire action, plus the radical new $5000 Laugo Alien pistol.
New RimX Rimfire Action with Rem 700 Footprint
We are always interested in new custom rimfire actions. With the growth of the NRL22 rimfire series, and potent rimfire varmint cartridges such as the .17 HMR and .17 WSM, we think the interest in rimfire custom rifles is growing. This video features the new RimX rimfire action. This features a Remington 700 footprint so it can fit a wide variety of stocks made for Rem 700s and Rem clones. That allows PRS guys to cross-train with a rimfire rifle that duplicates the ergonomics and feel of their centerfire match rifle.
This RimX action has some very cool features, such as interchangeable bolt heads so it can shoot .22 LR, .17 HMR, and (soon) .17 WSM. RimX action MSRP is $1150.00. Each bolt face features a non-protruding extraction system that allows for a flat breach face barrel to be installed without the need for timed extractor relief. This will make barrel interchangeability and installation easier than ever
Berger Bullets — New LR Hybrid Target and Hunting Bullets
At SHOT Show 2020, the big news from Berger Bullets was the arrival of new Berger Long Range Hybrid Target (LRHT) bullets and hunting bullets. Berger now offers some seriously big LRHT Bullet. Before the show, Berger announced the 7mm 190gr LRHT. At SHOT on Tuesday Berger showcased two new High-BC .30-Caliber LRHTs — the new 208gr and 220gr projectiles. All these LRHTs feature formed meplats for ultra-consistent BCs. In addition Berger unveiled two new heavy-for-caliber hunting bullets: The 6.5mm 156gr EOL Elite hunter and the .30 Cal 245gr EOL Elite hunter. In this video, Emil Praslick III explains the features of the new LRHT projectiles.
Laugo Arms states that its Alien pistol has the lowest bore axis of current semi-auto handguns. The barrel is fixed — it does not tilt-up like most semi-autos. Having shot the Alien at Industry Day on 1/20/20, we can confirm that the low bore axis does reduce muzzle flip, allowing very fast follow-up shots. With a fixed center rib, only the sides of the slide move back and forth. Initially only 500 Alien Special Editions will be offered, at the insane price of $5000.00 per pistol. You read that right — $5000 USD. Of course, in a year or two standard models should be available for a fraction of that cost.
This Alien pistol has been hailed as revolutionary. However, the Heckler & Koch P7 series of pistols had most of the Alien’s notable features way back in 1976 — 44 years ago. Like the Alien, the P7m8 and PSP featured a fixed barrel, low bore axis, and gas-delayed blowback operated slide. The HK P7s also had a unique squeeze cocker grip that eliminated the need for a manual safety.
H&K unveiled fixed barrel, low bore axis P7 pistol in 1976, 44 years ago. Production began in 1979.
Nightforce Wedge Prism — Gain Elevation for ELR Shooting
The Nightforce Wedge Prism is offered in two variants, 50 MOA or 100 MOA, that install forward of the riflescope to increase the effective elevation travel. The Wedge Prism optically shifts the incoming image to the riflescope by a precise elevation value, which directly adds to the available elevation travel within the riflescope. The Wedge Prism is designed to work optimally with 56mm front objectives. Nightforce says you can position two Wedge Prisms in parallel for maximum effect — up to 200 MOA total. These NF Wedge Prisms are pricey — MSRP is $990.00 for either the 50 MOA or 100 MOA version.
Annealing Made Perfect — AMP Mark 2 and New Automated Press
Gavin Gear of UltimateReloader.com checked out the latest offerings from Annealing Made Perfect (AMP), the state-of-the-art microprocessor-controlled induction case annealer. AMP is a New Zealand company run by father and son team Alex and Matt Findlay. Alex has extensive experience in the firearms industry while Matt is a talented engineer and product designer. Along with the AMP Mark 2 and accessories, Alex and Matt showed an advanced, servo-motor bullet seating machine with pressure sensors.
Jerry Miculek with New Mossberg JM 940 Pro Shotgun
GunsAmerica.com Editor True Pierce met with legendary shooter Jerry Miculek at SHOT Show 2020. Jerry showed the notable features of his new scattergun, the JM 940 Pro. This shotgun features a clean-running gas system, nickel boron-coated internal parts, and a competition-level loading port, elevator, and follower. For more info, check out the full article on GunsAmerica.com.
Bonus — Ryan Cleckner Chats about Gun University
The Gun University Website is a new resource for firearms news and technical information. We recently highlighted Gun University’s report on important ITAR rule changes that will affect firearms manufacturers, parts makers, and gunsmiths. One of the key contributors to Gun University is Ryan Cleckner, a former Army Ranger sniper instructor, attorney, and author of the Long-range Shooting Handbook. In this video Ryan talks about Gun University, his NSSF video series, and his ideas for growing the shooting sports.
The Great American Outdoor Show is a nine-day event in Harrisburg, Pennsylvania that celebrates hunting, fishing, and outdoor traditions treasured by millions of Americans and their families. Show organizers state this is the “world’s largest outdoor show”.
The event will feature nine halls of guns, archery equipment, fishing tackle, boats, RVs and more. At booths, there will be more than 400 Outfitters and Boat Captains from around the world. Numerous seminars and special events will be held starting February 1st. A number of Outdoor Celebrities will appear at the Harrisburg Show. In addition, there will be a Rockin’ NRA Country Music concert.
The NRA Foundation’s Wall of Guns returns to the Great American Outdoor Show this year. At the Wall of Guns, the NRA Gun Raffle will be held. Every day of the Show a winner is drawn for every 100 tickets sold. Winners may choose their firearm prizes from more than 40 different makes and models. With a number of different ticket packages ranging from $10 to $1,000, participants can increase their odds by purchasing multiple tickets. All net proceeds from Wall of Guns Raffles will benefit The NRA Foundation.
NRA Banquet on Thursday Evening
The Friends of NRA Banquet will be held Thursday, February 6 in the Pennsylvania Farm Show Complex’s Preferred Ballroom. The night of entertainment begins with doors opening at 6:00 pm. Attendees will have chances to win firearms, merchandise, and tailored hunts. This banquet raises money for national, state, and local programs that support America’s shooting heritage.
See a complete list of Show Activities at GreatAmericanOutdoorShow.org. If you attend the Outdoor Show, we recommend you download the handy Mobile App for your smartphone.
On January 23, 2020, the Trump administration published new rules that will significantly help the U.S. firearms industry and American gunsmiths. The new regulations officially take effect on March 9, 2020.
The rule changes modify export control of American firearms, as well as related parts, components, and accessories. Under the new Federal rules, export of common firearms and parts will now be controlled by the Department of Commerce, NOT by the Department of State under its International Traffic in Arms Regulations (ITAR). Those draconian ITAR provisions had adversely affected small parts manufacturers and gunsmiths through hefty fees and burdensome paperwork even if they did not actually ship guns overseas.
Gun author Ryan Cleckner explains: “Up until this change, the Department of State regulated exports of most firearms and their related parts, ammo, and information through [ITAR] which contain a list of covered firearm types called the United States Munitions List (USML). The USML includes all rifles, handguns, and short-barreled shotguns. The Department of Commerce, on the other hand, has the Export Administration Regulations (EAR) which regulates the export of all firearm types on a list, called the Commerce Control List (CCL), including regular shotguns (those with a barrel length of at least 18″) and their related parts, ammo, and information.”
1. Manufacturers will no longer have to pay a $2,250 annual registration fee.
2. No long approval process [for exports].
3. No Congressional approval needed for deals over $1 million.
4. Easier sharing of technical information for designs/R&D.
We caution our readers that these gun export regulatory changes do NOT alter domestic gun control laws in America. And gun exports are still subject to government oversight. However, Cleckner explains: “Instead of dealing with the ITAR rules and State Department licensing, the firearms industry will be able to use the more efficient export system through the Department of Commerce for most firearms. Certain firearms, like machine guns, will still stay under State Department control (under ITAR).”
According to the NRA-ILA: “No more will small, non-exporting businesses — including gunsmiths — be caught up in an expansive regulatory scheme for manufacturers of ‘munitions’ and their parts that requires a $2,250 annual registration fee with U.S. State Department. Americans will again be free to publish most technical information about firearms and ammunition — including on the publicly-accessible Internet — without fear of accidentally running afoul of State Department restrictions that could land them in federal prison.”
The new regulations will simplify overseas travel by hunters and competition shooters. Americans temporarily traveling overseas with their own guns and ammunition won’t have to register them in a government database or fill out commercial exporting forms.
Meanwhile, commercial exporters of non-military grade firearms and ammunition will have fewer fees to pay and will benefit from a more flexible, business-oriented regulatory environment. But note, actual exports of firearms and ammunition will still require authorization/licensing by the federal government. End-users of the guns in the countries of destination will also remain subject to U.S. monitoring.
The NRA-ILA observes: “This latest action is just one more example of how President Trump continues to move forward with his positive agenda to protect the right to keep and bear arms and the businesses that comprise America’s firearms industry. American manufacturing, as well as lawful firearm ownership at home and abroad, stand to make big gains under the president’s export reform initiative.”
The Berger Southwest Nationals (SWN), 2020’s biggest centerfire rifle match west of the Mississippi, is coming up next week. We know that many of our regular readers will be flying to Phoenix to attend the SWN. Here are some travel tips from experts in the industry.
If you’ll be traveling by air in the days ahead, be careful when transporting firearms through airports. It is important that you comply with all Homeland Security, TSA, and Airline policies when transporting guns and ammunition. Following the rules will help ensure you (and your gear) make it to your destination without hassles, delays or (God forbid), confiscations.
Good Advice from an Airport Police Officer
To help our readers comply with rules and regulations for air travel, we offer these guidelines, courtesy “Ron D.”, a member of our Shooters’ Forum. Before he retired, Ron D. served as a Police Officer assigned to Chicago’s O’Hare airport. Here Ron offers some very important advice for shooters traveling with firearms and expensive optics.
First, Ron explains that airport thieves can spot bags containing firearms no matter how they are packaged: “Don’t think you’re safe if your guns are placed in cases designed for golf clubs or trade show items. Baggage is X-Rayed now and cases are tagged with a special bar code if they contain firearms. It doesn’t take long for bad guys to figure out the bar coding for firearms.”
Carry-On Your Scopes and Expensive Items
Ron advises travelers to avoid placing very expensive items in checked baggage: “When traveling by air, carry on your rangefinder, spotting scope, rifle scope, medications, camera, etc. You would be surprised at the amount of people that carry-on jeans and shirts, but put expensive items in checked baggage. Better to loose three pairs of jeans than some expensive glass.”
Mark Bags to Avoid Confusion
Ron notes that carry-on bags are often lost because so many carry-on cases look the same. Ron reports: “People do accidentally remove the wrong bag repeatedly. I frequently heard the comment, ‘But it looks just like my bag’. When de-planing, keep an eye on what comes out of the overhead that your bag is in. It’s easy to get distracted by someone that has been sitting next to you the whole flight. I tie two streamers of red surveyors’ tape on my carry-on bag.” You can also use paint or decals to make your carry-on bag more distinctive.
General Advice for Air Travelers
Ron cautions: “Keep your hands on your items before boarding. One of the most often heard comments from theft victims was, ‘I just put my computer down for a minute while I was on the phone.’ Also, get to the baggage claim area quickly. If your family/friends can meet you there, so can the opportunists. Things do get lost in the claim area. Don’t be a Victim. Forewarned is forearmed.”
Choosing a Rifle Transport Case
Forum member David C., who will compete at the 2020 Berger SWN, offers this advice: “If you plan to fly with your rifle, a 55″-long case such as the Pelican 1770 may be too big and heavy. The 1770 is 36 pounds on its own and is quite unwieldly to move around. I would recommend going with a smaller case such as the Pelican 1720 with 42″-long interior. It weighs 19 pounds and if you separate your stock from the barreled action, everything fits just fine, as you can see below.” Editor: Note that you can also store a full-size spotting scope in the case along with your rifle:
Retired Airport Police Officer Ron D. advises: “Buy the best [rifle case] that you can afford. Don’t cry when your $3,000+ Benchrest rifle has a cracked stock or broken scope. Think about what it would be like to travel across the country and arrive with a damaged rifle. Baggage handling is NOT a fine art. There is no guarantee that your rifle case will be on top of all the other baggage. Then there is shifting of baggage in the belly of the plane. Ponder that for a while. Rifle and pistol cases must be locked. It doesn’t take a Rocket Scientist to figure out that a simple pry tool will open most case locks. There is not much that you can do to disguise a rifle case. It is what it is, and opportunists know this. Among thieves, it doesn’t take long for the word to get around about a NEW type of case.”
Great Deals on Plano All-Weather Cases at Amazon
Match season has begun, and that means hauling gear either in cars or on planes. Either way you need good cases for your firearms. We found the Plano All Weather Gun Cases at bargain prices. These are well-built and designed to protect whatever you put in them for a third the cost of some other brands. No Plano cases are not as refined as Pelican or SKB cases, but if you’re on a tight budget, the Planos can do the job. Read this article for more information on Plano cases.
This is NOT just a slower version of Alliant’s double-based Reloder 15 (which words great in the 6mmBR and Dasher cartridges). Reloder 16 is a completely new formulation, produced in Sweden by Bofors for Alliant. Reloder 16 utilizes TZ technology, which manipulates the response of the propellant and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures. As a result, Alliant’s Reloder 16 offers truly outstanding temperature stability.
Back in the old days, Pat McMillan told me: “You can not have two bags filled so hard that you gun bounces on them in the process of firing round at your target, especially if you have a rig with a very flexible stock. The bags must be set up in a manner for them to absorb the initial shock of the firing pin moving forward and igniting the primer. 
Sometimes you’ll get a barrel that doesn’t stabilize bullets the way you’d anticipate, based on the stated (or presumed) twist rate. A barrel might have 1:10″ stamped on the side but it is, in truth, a 1:10.5″ twist or even a 1:9.5″. Cut-rifled barrels, such as Kriegers and Bartleins, normally hold very true to the specified twist rate. With buttoned barrels, due to the nature of the rifling process, there’s a greater chance of a small variation in twist rate. And yes, factory barrels can be slightly out of spec as well.
First, Ron explains that airport thieves can spot bags containing firearms no matter how they are packaged: “Don’t think you’re safe if your guns are placed in cases designed for golf clubs or trade show items. Baggage is X-Rayed now and cases are tagged with a special bar code if they contain firearms. It doesn’t take long for bad guys to figure out the bar coding for firearms.”
