I absolutely love using this press stand. I use it with my Forster Co-Ax as well as my Dillon 550. The stand mounts those presses at the right height to minimize fatigue and maximize torque. Some products I merely review and return but this one is a keeper and won’t be leaving my bench anytime soon. — F-Class John
Lyman Universal Press Stand REVIEW
Product Review by F-Class John
Positioning your press at the optimal height is one of the oldest problems in reloading. Most presses sit low off the edge leading to uncomfortable arm strain or inconsistent pressure being applied while using. Lyman has set out to fix that problem with a reasonably-priced ($53.99 at Midsouth) press riser that works with the vast majority of reloading presses. This unit will raise just about any press up off your bench securely, allowing you to working more comfortably from a standing position. This also frees up vital bench space UNDER the press.
I have used a variety of presses over the years. At times I’ve run into issues mounting a press at a level that doesn’t promote arm or hand strain during normal operations. In the past I’ve used blocks of wood or even tried other brands’ proprietary stands. But I had very limited success with those options. Accordingly, I was very excited to give the Lyman Universal Press Stand a chance.
Lyman’s Universal Press Stand comes complete with side plates, two different top plates, and a large collection of mounting hardware. The two top plates are pre-drilled for numerous popular Single Stage or Progressive presses. Helpful diagrams and instructions show which side of the top plate you need to use. The pre-drilled holes accommodate a variety of presses from RCBS, Dillon, Lyman, Redding, and Hornady. But surprisingly, the plates are not pre-configured for the Forster Co-Ax Press.
CLICK to WATCH VIDEO Showing Lyman Universal Press Stand
Setting up the stand was very simple. The two sides bolt to the lower shelf unit at which point you attach the top plate. All the supplied bolts made this a breeze and once everything was snugged down, I was able to place it on my bench where I wanted it and mark the drill holes to mount it. After securing the stand to my bench it was time to mount my press.
Lyman Universal Press Stand with Dillon 550 Press
Adapting Lyman Universal Press Stand for Forster Co-Ax
At the time of testing I was primarily using a Forster Co-Ax press. With no pre-drilled Co-Ax configuration for either Lyman top plate, I decided to customize the blank side of one of the top plates. I opted to position the mounting holes so that the press could sit 100% on top of the mounting plate and not just off one edge. I found this process simple to execute. Mark your drill holes, then drill the plate. This can easily be done with regular drill bits although using a step-bit worked faster and cleaner to help enlarge the holes just a little when I needed some extra clearance.
Lyman Universal Press Stand Is Stable and Strong
Once set-up, I found the stand to be incredibly stable. The design allows for full force to be applied to the press no matter what the operation. Having used this Lyman Press stand regularly over the past few months with both my Co-Ax and a Dillon 550c, I still find myself loving it. The height is perfect and allows me to load as much as I like without straining my arm or getting fatigued. With an attractive price point (under $55.00 street price) and a simple design, I feel this is a great system for those looking for a secure and raised platform for their reloading presses.
The Universal Press Stand comes with two plates. If you have different presses that fit each plate you could easily swap presses just by changing plates while leaving the presses attached. It’s less functional if you have two presses that share one plate and would require removing one press before installing the next one.
Lyman Press Stand Unboxing and Set-Up (KFW Video Review):
Just in time for hunting season, the ZEISS Field Days Promotion is back and includes special offers for all ZEISS V4 and V6 riflescopes, Victory RF rangefinding binoculars, ZEISS Harpia and Gavia spotting scopes, and the Terra ED binoculars. The ZEISS Field Days promo starts August 1st and ends December 31st, 2019. CLICK HERE for more INFO.
Buy a new Conquest V4 or V6 riflescope and get a FREE gift. Choose either: A) Custom ballistic turret (Kenton Industries); or B) ZEISS accessory package with Throw Lever, Deluxe Lens Cleaning Kit, and five ZEISS Ballistic DOPE Cards. Retail value of either option is $120.
Here’s another great offer — buy a new Victory Harpia spotting scope in either 85mm or 95mm objective size, and you’ll get a free ZEISS eyepiece (retail value: $800.00). That is a heck of a deal. The Harpia series is as good as anything on the market.
Alternatively, if you purchase a a Conquest Gavia spotting scope or Victory RF rangefinding binocular with Bluetooth connectivity, you’ll receive a free Terra ED 10×42 binocular — a $499.99 retail value.
Finally, there are instant rebates for all ZEISS Terra ED 32mm and 42mm binocular purchases. Customers immediately save $50.00 while in the store or shopping on-line.
RCBS has announced the successor to the venerable RCBS Trim Mate. The New-for-2018 RCBS Brass Boss features six rotating stations that handle all your brass neck-brushing, chamfering, deburring, and pocket uniforming chores. The new Brass Boss includes tools for all six stations: inside VLD chamfering tool, outside deburring tool, primer pocket cleaners (small/large), military crimp removers (small/large), primer pocket uniformers (small/large), case neck brushes (four diameters), and a tub of dry case neck lubricant. MSRP for the Brass Boss, RCBS SKU 90390, is $189.95. Current “street price” is around $190.00.
This machine has two different rotation speeds for the toolheads. Four stations run at 350 rpm, while the two other stations run 57% faster, at 550 rpm. That give you a choice of spin speeds. You can work fast for tougher chores like military crimp removal, and slow down for inside-neck chamfering, which should be done carefully.
Larger and taller than the older RCBS Trim Mate, the new Brass Boss has one more station (six vs. five), plus a more powerful motor. This should make the Brass Boxx more competitive with the popular Lyman Case Prep Express.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
This Stack-On Sentinel Security Cabinet holds 18 rifles up to 54″ tall or nine firearms with extra storage. Adjustable, padded shelves can be placed on either right or left side. This unit features a 3-point locking system for greater security. No this safe is NOT as strong or secure as a quality, thick-walled gun-vault, but this 55″x21″x18″ Security Cabinet can work well as a secondary safe for your workroom, vacation cabin, or even an RV. Right now Walmart has “Roll-Back” pricing — $159.99 with FREE delivery. That’s right — pay just $159.99 for the safe delivered to your home or the nearest Walmart.
2. Bruno Shooters Supply — Berger Bullets at Great Prices
Match season is in full swing — so make sure you don’t run short on bullets. One of our go-to sources for reloading components is Bruno Shooters Supply. Bruno’s just recently updated its website, so you should check out the new features. While you’re there, look at Bruno’s selection of Berger bullets advertised at “lowest prices on the internet”. Berger match bullets are in high demand, but Bruno’s is offering great prices on many popular calibers and bullet weights.
3. EuroOptic — Sale on Vortex Strike Eagles, $299.99
Need a good basic optic for your hunting or varmint rifle? Have a tight budget but still need good glass and adjustable parallax? Then check out these Vortex Strike Eagles. Save $140-$150 now at EuroOptic.com. Sale price is just $299.99 for the 4-24x50mm and also $299.99 for the 3-18x44mm. EuroOptic’s Jason says these scope are a “killer value” with “target turrets, parallax adjustment close enough for rimfire, and good zoom range”. These Strike Eagles are also fairly short and light-weight, so they are good for hunters. Both these Second Focal Plane scopes offer 1/4-MOA clicks and nice EBR-4 illuminated reticles.
4. Bullet Central — Kelbly Atlas Tactical Action, $895
Kelbly actions are excellent. The Atlas series are rugged actions for practical/tactical and hunting use. This action features a Black Nitride finish so you can run minimal lubrication. The Atlas action comes with +20 MOA integral Picatinny Rail plus a nice fluted bolt. We also like the super-reliable TG mechanical ejector. This mag-fed Kelbly Atlas action takes Accuracy International and AI-type single-stack magazines. This fine Kelbly Atlas Tactical Action is now on sale at Bullet Central for the low price of $895.00.
Versatile and totable, this compact Samsung Galaxy 7″ tablet computer is just what you need at the range to run your Ballistics Apps, get WiFi images from your Target Cam, or “talk” to your LabRadar. The Galaxy Tab A 7.0 inch can also get internet weather reports and email. This is a modern device with myriad capabilities — all for under $130.00. It has a micro-SD slot so you can easily add more storage. You won’t find more bang for the buck in a digital device, and it even comes with free Tech support. NOTE: This is WiFi only — it is NOT a like a cellphone. It works via an internet connection (and blue-tooth).
6. Walther — PPQ and PPS Pistols, 30-Day Money Back Guarantee
We’ve heard of money-back guarantees on household products, and even pizzas. But never firearms. This is quite a unique offer. Walther is so confident that you will fall in love with Walther PPQ or PPS pistols that the German gun-maker is offering a 30-Day Money Back Guarantee.
Shoot it, if you like it, keep it. But if you don’t, you can send it back to Walther for a full refund. Walther even pays shipping! For more info visit www.WaltherArms.com. This offers applies to ALL Walther PPQ and PPS models.
7. Grizzly — Bald Eagle Priming Press, $80.97
Any serious competitor will tell you that consistent primer seating is one of the most critical steps in reloading. There are lots of choices out there for bench and hand-held primers but NONE of then match the Grizzly priming press which can be found for $80.97. It features a beautifully-made system that is click adjustable to .002″ and incredibly repeatable. If you’re in the market for something that’s easy on the hands and works like units that cost hundreds more give this one a look.
If you have been waiting to get a Magnetospeed… wait no longer. Priced at just $153.74 at MidwayUSA, the Magnetospeed Sporter model costs less than half as much as Magnetospeed’s V3 models. This chronograph attaches directly to your barrel so you don’t have to go downrange to position tripods and set up skyscreens. For most people the Sporter Model contains all the features they need. Using Magnetospeed’s XFR adapter (sold separately), data can be transferred easily from the display module to your mobile device. READ Magnetospeed Sporter Review. NOTE: You need to add the item to cart to see the $153.74 price. This typically sells elsewhere for around $180.00.
This versatile funnel system works with nearly all cartridge types, from 17 Remington up to 500 S&W. Even if you have a fancy metal funnel, it’s worth having one of these RCBS Kits on your reloading bench. The RCBS Quick Change Powder Funnel Kit features five (5) adapters that match case mouth diameter for specific cartridge ranges: 17-20 caliber, 22-264 caliber, 27-284 caliber, 30-375 caliber, 40 caliber and higher. The Funnel Kit includes a handy 4-inch drop tube. Price is $11.04 at Amazon with free shipping on orders over $25 total.
10. Amazon — Two Rolls of 3″ Neon Target Stickers, $12.99
We like these bright, Neon EasyShot 3″ target stickers. They are big enough to see easily at 600 yards, giving you a 1/2 MOA target center at that distance. For $12.99 at Amazon.com, you get 250 3″-diameter self-adhesive centers (125 targets per roll) that stick to almost any surface The high-contrast fluorescent red/orange color provides an excellent HI-VIZ aiming point, along with good contrast for bullet holes that fall within the 3″ circle. To help line up your reticle cross-hairs, the target centers feature black markers at 3, 6, 9, and 12 0’Clock. NOTE: These stickers qualify for FREE Shipping.
The folks at Applied Ballistics have a new toy — a large trailer filled with all the latest and greatest tech gear for testing long-range ballistics. Bryan Litz reported: “The maiden voyage for the AB Mobile Lab in Texas this week was a huge success! We look forward to supporting more long range shooting events.” Mitchell Fitzpatrick was there in the Lone Star state with fellow Applied Ballistics staffer Christopher Palka. The Applied Ballistics team will be trailering the Mobile Lab to Indiana where it will be on hand for the NRA National Championships at Camp Atterbury this month.
Ten rifles, heaps of cables, huge Doppler Radar unit, military-grade Laser RFs on tripods, spare barrels, safety gear — all ready for action in Texas.
About the Applied Ballistics Mobile Lab
Q: What is the basic purpose of the Applied Ballistics Mobile Lab?
Mitchell Fitzpatrick: The Mobile Lab allows us to effectively carry out ballistics testing in the field and at events. It has most of the capabilities of our normal lab, but on wheels.
Q: What hardware and electronics are carried in the Mobile Lab? What are its capabilities?
Bryan Litz: The Mobile Lab will transport most everything that’s in the main lab including the Doppler radar. This rig is new and we haven’t fully outfitted it yet. The load-outs will be somewhat flexible depending on the venue we are supporting.
The three rifles on the left are Barrett MRADS, $6000-$6154 MSRP, before optics.
NOTE to Readers — Check back at the end of the day. We will have more technical information from Bryan Litz and the Applied Ballistics team…
Today, August 5, the Vintage Sniper Team Match is taking place at Camp Perry, Ohio. This unique event is a two-man team competition using scoped rifles of WWI and WWII Vintage. This has become of of the most popular CMP rifle matches held at Camp Perry, with over 200 teams competing in recent years. Many competitors use some version of the M1903 Springfield, but you’ll also see scoped M1 Garands, K31s, Mausers, and even a Lee-Enfield or two. There are both bolt action and semi-auto classifications, with each division being scored separately.
Over 200 teams are vying for the Vintage Sniper Trophy today. Two-person teams will fire 10 rounds in 20-second intervals from scoped vintage military rifles set on sand bags. One team marksman shoots from the prone position at 300 and 600 yards, while the other serves as a spotter to relay shot position. Marksman and spotter switch positions on the firing lines, allowing each teammate to play both roles. Scores are then combined for an Aggregate team total. CLICK HERE for Sniper Match Results on the CMP Website
The Modern Smallbore Silhouette Rifle
Smallbore rifle silhouette is a shooting discipline that can really test a shooter’s ability and fundamentals. The saying in silhouette is “the bench proves the rifle, standing proves the shooter”. To be able to stand and shoot a rifle at targets ranging from 40 meters to 100 meters is no small feat, especially when the 100 meter ram target is just a little bigger than a large potato.
Of course, you need a good rifle. The CZ 455 has been at the top of the starter rifle list for a long time, however, a few newcomers such as the Tikka T1x are definitely challenging that spot. The gold standard in the silhouette discipline seems to be the venerable Anschutz 1712. With a fantastic two-stage trigger, smooth operation, great balance, and consistent accuracy it’s one of the most popular rifles, just look through the equipment survey from the U.S. Nationals and you will see what I mean. Even though the Anschutz is a great rifle, there are those competitors who want more. Enter Erich Mietenkorte, a Master silhouette shooter from Ellensburg, Washington and his P-51 Mustang-inspired .22 LR silhouette rifle.
The P-51 Mustang artwork was masterfully painted by Perry Mallet of Spokane, WA from a basic theme sketched out by Erich. This is one of the coolest gunstock paint jobs we’ve ever seen. Bravo Mr. Mallet!
Erich’s Smallbore ‘Silhouette Slammer’
Report by Erich Mietenkorte
At the heart of my .22 LR “Silhouette Slammer” is a Sako P94s Finnfire action. I chose this action due to its incredibly fast lock time. Mated to that is a tight-bore Lilja 4-groove barrel finished at 24 inches. This has a Winchester 52D chamber. The barrel and chamber combination were suggested by Loren Peter of Vancouver, WA, a long time silhouette shooter and gunsmith, and it definitely works! The rifle easily and consistently shoots under one inch at 100 meters with good ammo.
Finnfire Fitted with Modified Anschutz 2-Stage Trigger
The Finnfire was originally equipped with a single-stage trigger but I decided that a two-stage works better for me. There weren’t any available options at the time so I took an Anschutz 5109 trigger from a model 1712 and machined a new sear and mated it up to the action.
CLICK to Zoom Photo Click Image for large, full-size photo showing details of paint-work.
The rifle wears a Leupold FX-3 25-power optic, a scope favored by many silhouette shooters for its clarity, magnification, and relatively light weight. To make weight in Hunter Class, the rifle may weigh no more than 8.5 pounds total with optic! The last component that makes up this winning rifle is the amazing work of art that is the stock. All of these components rest in a custom fiberglass stock made specifically to push the limits of the NRA stock jig that all competition silhouette rifles must fit. The stock was constructed by Steve Wooster, a long-time silhouette shooter from Chehalis, WA. The P-51 Mustang artwork was masterfully painted by Perry Mallet of Spokane, WA from a sketch I did. Perry took an idea and used his artistic abilities to create a masterpiece that looks as good as it shoots.
Getting Started in the Silhouette Game
Erich’s advice for anyone wanting to get started in the fun and challenging discipline of silhouette is to take any .22 LR scoped rifle you have and simply show up at a silhouette match. On many occasions Erich has helped newcomers and has even loaned out his own rifle for novices to try. “One of the best things about silhouette is the generosity and friendliness of the competitors. Silhouette is a shooting sport that you don’t have to be intimidated, all shooting abilities are welcome and everyone has an opportunity to be successful.” To learn more about silhouette shooting, or locate a silhouette match near you, visit Steelchickens.com, a popular silhouette-centric web forum.
In this Video Erich Mietenkorte Shoots Rams at 100M with his .22 LR Silhouette Rifle:
Note the bullet impact locations on those 10 turkeys — that would be about a 1″ group. Great shooter with a great rifle. In Canada two weeks ago, Erich set a new Ram “long run” record, hitting 30 in a row.
The Three Amigos — Along with his P-51 paint job smallbore rifle, here are two of Erich’s centerfire silhouette rigs. Erich notes: “The green rifle is my High Power silhouette standard rifle (class weight limit 10 lbs. 2.0 oz.). This features a Defiance Machine Rebel action with a Lilja #6 Contour barrel finished at 26″. This rig is chambered in .260 Bobcat (aka 6.5×250, i.e. 250 Savage necked up to 6.5mm). This cartridge has the same energy as a .260 Remington but much less felt recoil. It is very efficient and makes a big difference when shooting a lot of rounds in a match.” Stock by Steve Wooster.
The brown rifle (upper right) is a blueprinted Remington 700 action with a Lilja #5 Contour barrel finished at 26″, also chambered in .260 Bobcat. Erich tells us: “I won Second Place at the U.S. National Championships last year with this rifle. Stock made by Wooster. This rifle is for the hunting rifle category (9-lb weight limit). For Hunter rifles in smallbore and High Power the trigger must have a safety and a pull weight at least two pounds. (By contrast, a Standard rifle may have any weight trigger with/without a safety.) Because you can shoot a Hunter rifle in the Standard rifle class, I started my High Power silhouette journey with this rifle and then added the Standard rifle later. I’ll be replacing this rifle this upcoming season with a Defiance Rebel action and barrel chambered in 6mm BR.”
Need a new barrel for your Rem-actioned hunting or tactical rifle? Here’s a great DIY option for riflemen. McRee’s Precision offers complete, no-gunsmithing re-barreling kits for Remington and Rem-clone actions. These feature a high-quality, pre-chambered “PRE-FIT” stainless barrel from Criterion, a Savage-style barrel nut, a recoil lug, and a special barrel-nut wrench. Most of the Pre-Fit barrels are 24″ long and threaded at the muzzle. CLICK Here for all Pre-Fit barrel specs.
With this system you can easily re-barrel your favorite Remington rifle yourself in less than an hour. You don’t need to pay gunsmithing fees, or wait weeks (or months) for a busy smith to do the job. And the price is under $500.00. Kits are currently available for these chamberings: 6.5 Creedmoor, 6mm Creedmoor, .243 Win, .308 Win, .308 Winchester Magnum. You can buy with confidence — McRee’s Precision offers a Half-MOA Accuracy Guarantee with its pre-fitted barrel kits.
The stainless steel Barrel Nut is set up for 1 1/16 x 16 barrel threads, while the stainless steel recoil lug has a 1/8 inch removable locator pin and is set up for 1.0625 dia barrel threads.
McRee’s Precision sells Rem-action Pre-Fit barrel packages (complete with barrel nut, recoil lug, and wrench) starting at $489.52. Choose from five chamberings: 6.5 Creedmoor, 6mm Creedmoor, .243 Win, .308 Win, and .300 Win Mag. These Pre-Fit barrel kits come ready-to-install. All you need to do is remove your current barrel, place the recoil lug, spin on the new tube, follow the instructions for setting head-space with standard go/no-go gauges, then torque the barrel nut against the lug. NOTE: You may require a barrel vise and action wrench to remove the original barrel. Chambering-specific headspace gauges required. Minor inletting changes may be needed forward of the action.
The folks at McRee’s Precision say their Pre-Fit system offers many advantages: “Remington Pre-Fitted Barrel Kits have become popular over the years. If Savage can do it, why not for our Remingtons? Our [Criterion-supplied] barrels are spec’d to the McRee standard of performance. There are several places to get the tools required to remove your factory barrel correctly. Once you have your barrel removed all you have to do is follow the normal Savage procedure to install your new barrel. We recommend that you contact your local gunsmith for the install. Feel free to call us with any questions.”
Product Tip from Ed LongRange. We welcome readers’ submissions.
The 6mm Creedmoor has become one of the most popular cartridges for PRS/NRL competition, and it also works great in the varmint fields. There are many 6mm Creedmoor factory rifle options now, such as the Savage Model 10 in GRS stock and the Ruger Precision Rifle (6mm Creedmoor).
Do-It-Yourself 6mm Creedmoor Rifle Project — UltimateReloader.com
Another cost-effective option for 6mm Creedmoor fans is to build your own rifle, starting with a Howa barreled action. The Howa 1500 is a mag-fed, flat-bottomed bolt action that ships with the excellent HACT 2-stage trigger. Howa barreled actions are available with a variety of barrel lengths and contours, starting at about $430.00 at Brownells. There are quite a few good stocks/chassis systems now offered for Howa 1500 actions, including the excellent KRG Bravo Chassis, which features an ergonomic composite outer shell over a precision-machined inner chassis.
Gavin Gear fitted a KRG enclosed fore-end and Mystic Precision MPOD to his 6mm Creedmoor rifle.
Our friend Gavin Gear of UltimateReloader.com has built a nice 6mm Creedmoor rifle using a Howa 1500 heavy-barreled action and KRG Bravo Chassis. This project has proven very successful. The rifle has shown impressive accuracy and outstanding reliability. Gavin hopes to use this rifle in practical/tactical competitions later this year.
In this video, Gavin fits KRG’s enclosed fore-end to the KRG Bravo chassis. This accessory fore-end features a top Picatinny rail and various attachment options on the sides and lower section. Here you can see the enclosed fore-end (upper right) next to the factory forend included with the KRG Bravo (lower left):
Gavin then fits a Mystic Precision MPod from EGW. This stable, wide-base bipod uses a T-Slot rail for rifle attachment, and has legs that adjust independently for height. The video shows the rifle coming together step-by-step. This is something the average guy can do with simple tools — no gunsmithing is required, because the Howa barreled action is pre-chambered for the 6mm Creedmoor cartridge.
In the video above Gavin unboxes his Howa 1500 barreled action from Brownells. He then mounts the barreled action to the KRG Bravo stock, checking the torque levels. Next Gavin borescopes the hammer-forged barrel (5:55) noting: “What I saw I liked — there are practically no tooling marks. The finish on the lands and grooves looks really good”. Lastly, Gavin tested the trigger with his TriggerScan TS-11 (6:24), confirming a two-stage pull weight of about 2.25 pounds out of the box.
Many of the best rifle competitors in the United States will be heading to Indiana next week to compete at the 2019 NRA National High Power Rifle Championships which commence Monday, August 5, 2019. The Across-the-Course Championship, Mid-Range Championship, Long Range Championship, and Extreme Long Range Championship will all take place August 5-21, 2019 at Camp Atterbury, near Edinburgh, Indiana.
Day By Day Planner for 2019 Nationals at Camp Atterbury
Monday, August 5 will be the First Shot Ceremony, and squadded practice will also begin.
Tuesday, August 6 marks the beginning of the Team Matches. They will conclude on August 7.
Thursday, August 8 is the start of High Power Across the Course competition. They last until August 11.
Monday, August 12 is the Mid Range Team Championship, lasting until August 13.
Tuesday, August 13 is the first day of the Mid Range Individual Championship. They last until August 16.
Saturday, August 17 will be the Palma Team Match day.
Sunday, August 18 begins the Long Range Championship which continues through August 21.
Wednesday, August 21 is the registration day for the NRA Extreme Long Range Championship. The match will be fired over the next two days, finishing on August 23.
Lodging at Camp Atterbury and Nearby
Camp Atterbury offers on-base lodging — rooms and cabins will be available to all competitors 18 and over. Camp Atterbury lodging includes suites and standard rooms as well as the MWR Campground and the MWR Cabins. Lodging is controlled by the Camp Atterbury Lodging Office, not by the NRA. Entry fees DO NOT include lodging costs. There are also a number of hotels nearby, including Charwood Suites. Nearby campground Johnson County Park also offers special rates for High Power competitors.
With the CMP hosting important matches next year at Camp Perry, many rifle competitors will be “commuting” between the two venues this summers, driving 4.5 hours from Indiana to Ohio.
This machine has two different rotation speeds for the toolheads. Four stations run at 350 rpm, while the two other stations run 57% faster, at 550 rpm. That give you a choice of spin speeds. You can work fast for tougher chores like military crimp removal, and slow down for inside-neck chamfering, which should be done carefully. 
