The Vanquish Pro ($109.99 on Amazon) has BlueTooth. The basic model does NOT have Bluetooth.
Many readers use electronic muffs during matches so they can hear range commands. The Howard Light Impact Sport muffs are popular and affordable at around $53.00 on Amazon. Now there is a new alternative from Bushnell/Champion — the Vanquish Series electronic muffs. These feature ultra-fast under 1 millisecond sound compression with HD speakers. The Vanquish Pro and Pro Elite models offer Bluetooth connectivity, so users can take phone calls or listen to music at the range. The Elite models also offer Active Noise Cancellation (ANC). On all Vanquish models, the earpads are a nice soft foam for comfort, and the shell design is angled at the rear to provide more clearance on gunstocks. That’s smart.
Vanquish Muffs Offer Ultra-Fast Reaction Time with less than 1 millisecond Sound Compression:
So far, Vanquish muff users have been impressed. Audio quality is good. The 3X sound amplification on the basic model ($54.00 on Amazon) provides ample volume for conversations (Pro Model goes up to 5X). The ear foam is soft for all-day comfort. Top PRS competitor Bryan Sikes states: “Been a big fan of these new muffs for a while. been using the Vanquish Pros and it’s nice to listen to some Taylor Swift via Bluetooth or take a call if I need to when denting primers. Comfortable and less than half the cost of Sordins.”
Consider Running Plugs Under Muffs
The basic Vanquish Muffs have a 22 NRR (Noise Reduction Rating), same as the Howard Leight Impact Pros. That’s not enough, in our opinion, for sustained multi-hour exposure to firearm noises, particular indoors, or outdoors on a busy firing line. The Vanquish Pro ($109.99 on Amazon) has a better 24 NRR, but we would still recommend using ear-plugs under the muffs, for superior noise reduction. We like the Howard Leight MAX-1 plugs, which offer 33db NRR by themselves.
In the late fall of this year (2019), Lapua will open a second USA Lapua Rimfire Test Center at the Cardinal Shooting Center in Marengo, Ohio. The new Test Center will offer rimfire shooters the opportunity to match individual lots of Lapua ammo to their match rifles and pistols. All of the capabilities of the new test center will replicate Lapua’s current USA Rimfire Test Center in Mesa, Arizona.
Patterned after the world-renowned Lapua Test Center in Germany, the new Ohio center affords shooters the opportunity to test different types and lots of Lapua ammunition, in their own firearms, under tightly controlled conditions. At the heart of each operation is the 100 meter test range. Fully instrumented, with state of the art Meyton/Bollman electronic targeting systems, the centers can record ammo accuracy at both 50 and 100 meters with a single string. Customers have the option to send their rifles in for testing or schedule an onsite appointment. Customers interested in testing at either USA Lapua Rimfire Test locations (Arizona or Ohio), should call (480) 898-2731 or email rimfiretest@capstonepg.com .
Lapua Hires Ace Smallbore Shooter to Manage New Testing Facility
Lapua has appointed Luke Johnson as manager of the new Rimfire Test Center. Johnson, a native of Marysville, PA, is a long-time competitive shooter and hunter. Luke recently became the NRA Smallbore Silhouette Standard Rifle National Champion and he was a USA Junior National Champion in 50m rifle. At the University of Alaska-Fairbanks, Luke was a 4-year letterman for the University’s D1 Rifle Team.
Luke says, “I’m excited to join the crew at the new Lapua testing center in Ohio. I have trusted Lapua for many years in my own competitive experiences and look forward to helping others improve their performance and confidence. The new test center will open up more opportunities for competitors to use Lapua ammunition.”
“We’re very fortunate to have Luke join the Capstone family in this very important role. We’ve watched Luke for many years in his competitive shooting, and while that was a key in his selection to this position, his people skills are even greater. His outgoing personality and eagerness to help others excel are exactly the qualities we sought in filling this new position,” stated Adam Braverman, Capstone Precision Group Director of Sales & Marketing.
About Capstone Precision Group
Capstone Precision Group produces Berger Bullets and Ammunition, and is the exclusive distributor of Lapua components and ammunition, Vihtavuori Powders, and SK Rimfire ammunition. Capstone Precision Group is a Part of Nammo Group. For more information, visit Capstonepg.com.
Is a ZERO extreme spread possible? Yes. Lou Murdica proved that, with AMP-annealed cases, and advanced reloading methods, you can achieve the exact same muzzle velocity — 2924 FPS for two shots in a row. Oh, and the accuracy wasn’t too bad either. Shooting in a tunnel with an F-Open rig on the bench, Lou put two rounds within 0.1 inch. Note, the rounds were fired with the wood-stocked F-Open/Benchrest rifle on the left, not the Rail Gun on the right. The full annealing and reloading process is shown in the video below:
See Complete Testing and Reloading Process in 3-minute Video!
We highly recommend you watch this video ALL the way through, and then watch it again. You will see one of the best shooters in the world loading precision ammo. Lou is a world-class short-range benchrest, long-range benchrest, and F-Class shooter. In this video you can see Lou load a cartridge start to finish, beginning with annealing using a computer-controlled AMP induction annealing machine.
After firing, the 6.5 Creedmoor case was annealed with the AMP induction annealer.
Here is Lou Murdica’s Reloading Procedure Used in this Test:
1. Anneal 6.5 Creedmoor cartridge in AMP Mk II Annealer.
2. Lubricate case with Imperial Case Wax.
3. Full-length size case with Redding FL bushing die in single-stage RCBS Big Max Press.
4. Apply Moly dry lube to inside of case-neck with brush.
After FL Sizing, and before bullet seating, Murdica applies dry Moly lube inside the case-neck.
5. Seat Primer with Bald Eagle Precision Primer Press.
6. Throw charge to within 1 kernel with Auto-Trickler System and Force Restoration Lab Scale.
7. Drop charge in case with precision funnel.
8. Seat bullet with hand die and Sinclair Arbor Press.
Two Rounds, Same Case, Both with Exact Same Velocity — 2924 FPS
If you watch the video, you can see that, for the second 6.5 Creedmoor round, the velocity is 2924 FPS. That is exactly the same velocity as shot number 1. So the two-shot Extreme Spread (ES) is Zero. The second shot was 0.1″ from shot number one — pretty close to one hole. Lou was using Vihtavuori powder and Berger AR bullets. On the screen, Oehler Ballistic Instrumentation software displays bullet velocities and impact locations using inputs from chronograph and acoustic target sensors.
Credit Boyd Allen for identifying Oehler System and RCBS Big Max Press.
Did you know that there’s a free online resource that provides key data for thousands of bullet designs? The ShootForum Bullet Database provides profiles with weight, length, SD, and Ballistic Coefficient for nearly 3900 bullet types from all the major manufacturers. You can access all this info for free. This is a great place to start when you’re considering bullet options for a new rifle, or a new chambering for an existing rifle. To be fair, not all the latest, greatest match bullets are listed here. Could the database benefit from updates — yes, but it is still a great info source. You should definitely bookmark this resource for easy access in the future.
The massive ShootForum.com Bullet Database includes over 3900 bullet designs in all. We counted nearly 200 different 6mm bullets! The bullet info comes from the makers of QuickLOAD Software. Access to the online database is FREE. Most database entries include Caliber, Manufacturer, Stated Bullet Weight, True Bullet Weight, Length, Sectional Density (SD), and Ballistic Coefficient. In many cases multiple BCs are provided for different velocity ranges. Having bullet length lets you know right away if your cartridge/bullet combo can fit your magazine.
The database is great if you’re looking for an unusual caliber, or you want a non-standard bullet diameter to fit a barrel that is tighter or looser than spec. You’ll find the popular jacketed bullets from major makers, plus solids, plated bullets, and even cast bullets. For those who don’t already own QuickLOAD software, this is a great resource, providing access to a wealth of bullet information.
Impressive engraving by Jesse Kaufmann. Note how the scope rings have been engraved to perfectly match the engraving pattern on the Remington 547 action.
Who says fine craftsmanship is dead? There’s a fellow up in South Dakota, Jesse Kaufmann, who produces some of the most handsome engraving we’ve seen. Jesse, who operates Black Hills Gunstocks and Engraving LLC, is a true master at metal engraving and he also does superb stock checkering. Here are some examples of Jesse’s engraving work:
About Jesse Kaufmann, Master Engraver
Jesse Kaufmann was a professional stockmaker for Dakota Arms for over a decade. In 2009, he was inducted in the American Custom Gunmakers Guild as a checkering specialist. In January 2017, Jesse was awarded his Master Engraver certification by the Firearms Engravers Guild of America. With his broad skill set, Jesse is able to offer his clients a unique and complete package of stock work, finish, checkering, and engraving for a custom package that is all completed under one roof by his own hands.
Jesse Kaufmann’s work has been featured in American Rifleman, American Hunter, FEGA’s The Engraver, Sports Afield, Waidmannsheil Journal of German Gun Collectors Assn., Gun Digest 71st Edition, Modern Custom Guns Volume 2, Dangerous Game Rifles 2d. Edition. For more info, visit BlackHillsgunstocksandengraving.com, email blackhillsgunstocks [at] gmail.com, or call Jesse at (605) 499-9090.
In setting a Women’s record at the 2019 Nat’l Trophy Individual Match, Sara beat 987 other shooters. Only four competitors, all men, had higher scores.
This lady can shoot! At this year’s National Trophy Individual Match (NTI) at Camp Perry, the very talented Sara Rozanski sent an all-time record for female competitors. Sara shot a stellar 496-22X, a new record score for lady shooters. That record-breaking performance won Sara the Women’s Trophy at the CMP National Matches.
“It felt amazing to be able to pull it together and perform well”, Rozanski told reporters. Rozanski’s performance eclipsed the previous women’s record of 496-19X set by the U.S. Army Marksmanship Unit’s Amanda Elsenboss in 2017. Sara finished fifth overall in the 2019 NTI.
“It’s an honor to set a new women’s record since the level of competition is so high. It gives one a sense of accomplishment knowing you are competing against the best competitors this sport has to offer”, Rozanski said. By stages, Rozanski scored 100-2X standing, 98-2X rapid sitting, 99-6X rapid prone, and 199-12X prone at the 600-yard line.
Camp Perry includes rifle ranges out to 1,000 yards. Camp Perry boasts one of the longest continuous firing lines in the world.
Among all NTI competitors, Sara finished fifth overall after tie-breakers, just one point out of first place and four points from a perfect score of 500. Only four other competitors (all males) beat her 496-22X tally. A total of 992 competitors fired in this year’s NTI match, so Sarah finished ahead of 987 other shooters. That is mighty impressive!
A native of Toledo, Ohio, just 28 miles from Camp Perry, Rozanski has been competing in High Power rifle events since she was 16 years old, when she started with the M1A, the semi-automatic civilian equivalent of the Army’s M14 rifle. Rozanski serves as the Civilian Marksmanship Program’s High Power rifle program coordinator in Port Clinton, Ohio.
National Trophy Individual Match
The NTI course of fire has no sighters. It starts with 10 shots standing slow fire at 200 yards, followed by 10 shots sitting (or kneeling) rapid fire in 60 seconds at 200 yards. This is followed by 10 shots prone rapid fire in 70 seconds at 300 yards. The match concludes with 20 shots prone slow fire with a time limit of 20 minutes at 600 yards.
Do you like the Chris Byrne bench at left? For more details, CLICK HERE.
FREE Bench Plans on the Web
Building your own portable shooting bench is a great do-it-yourself project. You can build a sturdy bench for well under $100 in materials. Compare that to some deluxe factory-built benches which may cost $600.00 or more. You’ll find a wide assortment of home-built shooting bench designs (both portable and fixed) on the internet. Renovation Headquarters has links to FREE Plans and building instructions for fourteen (14) different shooting benches. There are all-wood shooting bench designs as well as benches that combine a wood top with a metal sub-frame or legs.
Heavy Wood Bench That Converts to Three Sections for Transport
In addition to the fourteen benches mentioned above, here is an interesting break-down bench design. Call it a “semi-portable” bench. The legs and frame are made from stout 4×4 post segments so the bench is fairly heavy. However, this bench can break down into three (3) sections for easier transport to and from the range. Dado-cut channels assure proper top alignment. This might be a good choice if you plan a multi-day excursion to a location without fixed benches. This three-leg bench design can be made from easy-to-locate materials. Note: The dimensions of this bench are are larger than typical fixed benches to accommodate 50 BMGs and other big rifles. CLICK HERE for more details.
by Sierra Bullets Ballistic Technician Gary Prisendorf
Occasionally someone will ask, “Why did I get a flyer that didn’t go in with the rest of my group?” If I had an answer that would stop flyers from happening, I would be rich.
There are many reasons why this can happen. Everything from gripping a forearm differently to variations in the brass casing, the list goes on and on. Most of the time the flyer is usually shooter induced and sometimes what you may think is a flyer, is just part of your group. There are a lot of shooters, that go out and test a load and they may shoot a 3/8” group at 100 yards and think that load is good. But I have seen far too many times that you can shoot another group, same load, same rifle and the next time you may get a 1 ¼” group.
The total opposite can also occur. You may shoot a 1 ¼” group and turn around and follow it with a 1/2″ group without changing anything. If you only shot the one group, you might decide that load wasn’t any good and move on to something else without really knowing what that load was capable of.
To really determine how a particular load is performing we need to shoot multiple groups and take an average of the group sizes to really see what that rifle/load combination is really capable of.
I suggest shooting a minimum of three 5-shot groups and averaging the group sizes before deciding if the load is acceptable or not. Obviously the more rounds you shoot for a group and the more groups that you shoot, you will get a much better representation of what that particular combination can do.
Now I’m not saying to go out and shoot 30 groups with 50 rounds in each group to determine how well your load is shooting. That would be a bit pointless, in some cases it would be time to re-barrel your rifle before your load development was finished.
In most cases, I feel that three to five, 5-shot groups will give you a pretty good representation of how a load will perform in that specific firearm.
Need targets — not just any old targets, but the correctly-sized targets for specific shooting disciplines (such as NRA Smallbore, F-Class, and 1K Benchrest)? Well you won’t find them at your neighborhood Wally World store. Precise, dimensionally-correct competition targets are producted by a half-dozen specialty printers. In this article we provide links to the leading target sellers, with a chart showing “who’s got what”. Look for your particular discipline and the vendors will be specified.
Sources for Official Shooting Competition Targets:
AccurateShooter.com offers dozens of FREE, printable targets for target practice, load development, and fun shooting. We also offer a few of the most popular NRA Bullseye targets. One or more of these printable targets should work for most training purposes. However, some readers have asked: “Where can we get the real targets… exactly like the ones used in NRA, IBS, and NBRSA shooting matches?”
All these vendors carry nearly all the NRA High Power and Smallbore targets, including the new, smaller F-Class targets. National Target has the F-Class and High Power targets, including 100-yard reductions of the 200, 300, and 600-yard military targets.
Germany’s Kruger Targets sells all the important NRA targets, and international (ISSF) air rifle and smallbore targets too.
Orrville Printing currently sells IBS targets for rimfire (50 yard) benchrest, short-range centerfire Benchrest (100, 200, 300 yards), Hunter BR Rifle (100, 200, 300 yards), plus the official 600-yard and 1000-yard IBS targets. National Target Company also has most of the IBS targets. NBRSA short-range, 600-yard, and 1000-yard benchrest targets are available directly from the NBRSA Business Office. Call (307) 655-7415 to order for the season.
Need Steel, Cardboard Silhouettes or specialty targets? ALCO Target Company in Duarte, California is the USA’s leading producer of the full spectrum of shooting targets including paper targets, cardboard targets, steel targets, and target stands.
The Scholastic Shooting Sports Foundation (SSSF), through the Scholastic Clay Target Program and Scholastic Action Shooting Program, awarded 126 youth athletes over $100,000.00 in college Scholarships for this upcoming academic year. The funds were awarded to qualifying applicants. In addition, some young competitors received special sponsor scholarship checks at the 2019 National Championships in Marengo, Ohio last month (see below). CLICK HERE for all scholarship winners.
National Director Tom Wondrash noted, “this is the first time our combined programs were able to award our Youth Athletes and their families over $100,000 in college scholarships. We could not have done it without the generous support of our program sponsors who continue to step up and support this initiative”.
In addition to the scholarships awarded to SCTP and SASP youth athletes who apply for these awards, at this year’s National Championships special scholarships were awarded by Browning, Beretta, and Blaser USA. In order to be eligible, athletes must have shot a Browning shotgun in 16-yard singles trap, a Beretta shotgun in the skeet event, or a Blaser shotgun in the sporting clays event.
The Scholastic Shooting Sports Foundation is 501(c)(3) public charity responsible for all aspects of the Scholastic Clay Target Program (SCTP) and Scholastic Action Shooting Program (SASP) across the United States. For more information, visit SSSFonline.org.
About Jesse Kaufmann, Master Engraver
This lady can shoot! At this year’s National Trophy Individual Match (NTI) at Camp Perry, the very talented Sara Rozanski sent an all-time record for female competitors. Sara shot a stellar 496-22X, a new record score for lady shooters. That record-breaking performance won Sara the Women’s Trophy at the CMP National Matches.
