Early 6-shot Model 617 shown. Current Model 617s have 10-round cylinders.
“But Honey, I really do need a new gun….”
If you are looking for justification for getting a new handgun, show your spouse this article. Today we explain why every serious shooter should have a .22 LR wheelgun. Rimfire revolvers are versatile, reliable, easy-to-operate, and fun to shoot. A good .22 revolver will be considerably more accurate than 90% of the self-loading pistols you could buy. With a good a .22-caliber rimfire revolver you will learn sight alignment and trigger control. Plus you can practice with inexpensive ammunition.
The better .22 LR revolvers also hold their value. In particular, a Smith & Wesson Model 617 (or its predecessor, the Model 17, shown below) is a good investment. You could use your S&W wheelgun all your life and then pass it on to your kids. If you or your heirs ever wear out the barrel or cylinder, Smith & Wesson will replace the parts for free, forever. Think about that…
The Model 63 Kit Gun is a compact 6-shot (older) or 8-shot (newer) revolver. Older Model 63s are in high demand, so this is another Smith wheelgun that holds its value well…
Smith & Wesson Model 617 — Smith’s Model 617 is extremely accurate, with a very crisp trigger (in single-action mode), and good sights. You can learn all the fundamentals with this ultra-reliable handgun, shooting inexpensive .22 LR ammo. The Model 617 is rugged, durable, and can give you a lifetime of shooting fun.
Once you have mastered the basics of shooting with a .22 LR, you can move on to larger caliber handguns suitable for self-defense. Below is a slide-show illustrating a S&W Model 617 ten-shot, with 6″ barrel. S&W also makes a 4″-barrel version of this revolver. (See: Shooting Demo Video with 4″ model 617.)
Long-time site sponsor Powder Valley notified us about some great Rebate offers from Vista Outdoor companies Alliant, CCI, Federal, and Speer. If you need powder, primers, or bullets, now is a great time to buy. The rebated offers are good now through June 30, 2019. These rebates may also be available when you purchase qualifying products from other vendors Bruno’s, Graf’s, Midsouth, and Precision Reloading.
1. ALLIANT Powder — More Bang for your Buck$ Rebate
If you buy at least four (4) pounds of powder you get $2.00 back per pound, with a rebate limit of $20 (for ten pounds). Minimum purchase four (4) pounds required. This is a great deal when you combine the rebate with Powder Valley’s already low prices.
2. Federal — Handload and Save Rebate
Spend at least $100 on Federal® reloading components (including bullets, brass and primers) to get 20% of the purchase price back. Rebate amount calculated on purchase price only, does not include taxes and/or shipping/handling fees. Maximum rebate $100 per person or household. Minimum spend $100 required.
3. CCI — Primed for Action Rebate
Spend at least $100 on CCI® reloading primers to get 20% of the purchase price back. Rebate amount calculated on purchase price only, does not include taxes and/or shipping/handling fees. Reloading components only; offer does not apply to percussion caps. Maximum rebate $100 per person or household. Minimum spend $100 required.
4. Speer — More Bullets for your Benjamins Rebate
Spend at least $100 on Speer® component bullets to get 20% of the purchase price back. Rebate amount calculated on purchase price only, does not include taxes and/or shipping/handling fees. Maximum rebate $100 per person or household. Minimum spend $100 required.
Get up to $320 Total Rebate — Alliant, CCI, Federal, and Speer
These Rebate Offers are good through June 30, 2019. Powder Valley explains that these rebates are all separate programs: “Each of these brands have their own rebate, No Mixing and Matching of these brands unless you want to participate in all four rebates. If you have any questions please read the Terms or call us to explain.” To get any particular rebate you’ll need to buy the qualifying amount of product for that particular brand. If you do all four Rebates, you could get a total of $320.00 back.
Many of our Forum members have expressed interest in a recoil-reduction system for prone F-Open competition rifles shooting heavy bullets from powerful cartridges. A .300 WSM shooing 200+ grain bullets can definitely take its toll over the course of a match. One system that has been used with considerable success is the hydraulic “Bump Buster” recoil system. This definitely reduces the pounding your shoulder gets during a long match. To illustrate this system, we’ve reprised an article on Brett Soloman’s F-Open rifle from a couple years back. Watch the Videos to see the Bump Buster in action.
On his Facebook page, Hall-of-Fame shooter and ace gunsmith Thomas “Speedy” Gonzalez unveiled an impressive new F-Open rifle built for Bret Solomon. The rifle features Speedy’s new low-profile F-Class stock.
Bret’s gun is chambered for his 300 Solomon wildcat, shooting heavy 210gr bullets, so it can can be a real shoulder-buster, without some kind of buffer. The stock is fitted with a Ken Rucker’s Bump Buster hydraulic recoil reduction system to tame the recoil. The Bump Buster was originally designed for shotguns and hard-hitting, big game rifles. It is interesting to see this hydraulic buffer adapted to an F-Open rig.
Here you can see Bret shooting the gun, coached by Nancy Tompkins and Michele Gallagher:
Bret’s gun features a stainless Viper (Stiller) action, barrel tuner, and an innovative Speedy-crafted wood stock. Speedy says this stock design is all-new: “It is a true, low Center-of-Gravity F-Class stock, not a morphed Palma stock merely cut out on the bottom”. See all the details in this short video:
Stock Features: Glue-in or Bolt-In and Optional Carbon Pillars and Cooling Ports
Speedy explained the features of the new stock design: “Terry Leonard and I started working on an F-Class version of his stocks last year during the F-Class Nationals and came up with what he and I consider the first true low-CG stock in the sport. As you can see by the videos, there is very little torqueing of the stock during recoil. I add the carbon fiber tunnel underneath the forearms to save Terry some time. This bonds very well to his carbon fiber skeleton within the stock adding addition stiffness to the forearm to support the heavy barrels found on the F-Class rigs. We are playing with both glue-ins like we benchresters use and bolt-ins as well. The rifles on the videos are glue-ins. Bret just took delivery today of his first bolt-in employing carbon fiber pillars and the first Leonard stock ever to have cooling ports.”
Need for Recoil Reduction Follows F-Class Trend to Bigger Calibers and Heavier Bullets
In recent years we have seen F-Open competitors move to bigger calibers and heavier bullets in pursuit of higher BC. There is no free lunch however. Shooting a 210gr .30-caliber bullet is going to produce much more recoil than a 140gr 6.5mm projectile (when they are shot at similar velocities). Does this mean that more F-Open shooters will add hydraulic buffers to their rigs? Will a recoil-reduction system become “de rigueur” on F-Open rifles shooting heavy bullets?
Our friend Boyd Allen observes: “You may imagine that shooting a short magnum, or even a .284 Win with heavy bullets, involves a fair amount of recoil, and in the prone position this can be more than a little wearing. It can in fact beat you up over the course of a match. Some time back, Lou Murdica told me about having a hydraulic recoil absorbing device installed on one of his F-Class rifles, chambered in .300 WSM. Lou is shooting heavy (210-215gr) bullets so the recoil is stout. According to Lou, the hydraulic recoil-reduction system made all the difference.”
Story tip from Boyd Allen. We welcome reader submissions.
Need an affordable new optic for your hunting or varmint rifle? Consider the new Prostaff P5 Series from Nikon. Prostaff P5 scopes all boast a 4X zoom ratio, generous eye relief, and available BDC (bullet drop compensating) reticles. Choose your desired magnification range: 2-10X, 3-12X, 4-16X, or 6-24X. The biggest P5, the 6-24x50mm with BDC, has an MSRP under $450.00, making it a very affordable choice for a side-parallax varmint scope. Being able to zoom all the way from 6X to 24X is handy on a prairie dog safari. Deer hunters should consider the P5 2.5-10x40mm. It is just $229.00 MSRP. All these scopes come with a great “No Fault” lifetime warranty.
Engineered for low mass, PROSTAFF P5s feature all-aluminum zoom ring, plus focusing eyepiece.
Nikon P5 Reticle Options
The Prostaff P5 is the first one-inch tube riflescope in Nikon’s hunting lineup to offer its new MK1-MOA long-range reticle. Together with precise, 1/4-MOA turrets, the MK1-MOA reticle provides precise visual reference points for ranging, holdovers and windage corrections. The renowned BDC reticle and Nikoplex reticles are also offered for those that either want a ballistic compensating reticle or a single aiming point respectively. All reticle options are supported by Nikon’s Spot On Ballistic App for quick referencing in any field situation.
Vu Pham takes a shot at the Snake River Sportsman Range in Oregon. Click image for full-screen version.
Vu Pham recently attended a great practical/tactical match, the Gem State Stand Off. This NRL-sanctioned match drew 113 shooters, including many of the best PRS/NRL competitors in the country. Vu says this was a great event: “The 220-round, 22-stage course of fire was fun, yet challenging. Every stage had a two-minute par time requiring 10 rounds fired at multiple targets. 113 competitors fired about 24,000 rounds without a single target failure.”
2019 Idaho Gem State Stand Off AAR
Target Distances: 300 to 1200 yards
22 stages/220 round Course of Fire
113 Competitors
Match Directors: Nate Lauerman & Seth Howard
Range Officers: 21 Precision Rifle Shooters of Idaho
Event Date: March 23rd & 24th, 2019
Location: Snake River Sportsman Range in Vale, Oregon
“With technological advances in equipment, training, and ballistics, plus increased opportunities for competitors to fine-tune their skills, Practical Precision Rifle competition has become a perfectionist sport. The constant evolution of this discipline never ceases to amaze me. With competitors and manufacturers constantly pushing to gain an edge… there is no shortage of innovation.” — Vu Pham
Gem State Stand Off — After Action Report
Report by Vu Pham, NorCal Practical Precision Rifle Club
I was fortunate enough to snag a last-minute slot for the 2019 Gem State Stand Off hosted by the Precision Rifle Shooters of Idaho Club (PRSID). This is one of 17 National Rifle League events where competitors will battle for points hoping to secure a slot for the 2019 NRL Championship. The Snake River Sportsman Range is a beautiful venue in Vale, Oregon, near the Idaho border.
The digital display carries ballistics info and elevation/windage tables from Vu Pham’s Kestrel. He says the unit really helps his performance.
From the hills looking down-range. Click image for full-screen version.
Hardware Report — Top PRS/NRL Gear for 2019
Modern Precision Rifle Comp Gear — Stocks and Chassis Systems
The traditional rifle stock we know has now moved to more modular and customizable designs. One product that caught my eye is the new XLR Industries Envy JV Heavy Fill Chassis system. After seeing a lot of competitors use them with good results, I think I will be giving one a try soon. Not being able to borrow a piece of gear because the entire squad is running ARCA can be a drag. Picatinny forearm rails have gone the way of the dinosaur with ARCA Swiss becoming the standard for attaching accessories.
Those like myself who may not want to give up their traditional-style stocks do have the option of modifying their existing stock with a universal ARCA rail from Henderson Precision. That company makes a variety of rails that fit a number of stock platforms.
Rifle Support Options — Bags and Tripods
Tripods are also used a lot as front and rear support by the majority of the field as well. Support bags now come in every shape, size, weight, and material imaginable. Even the fundamentals of driving your rifle is being challenged by the evolution of “free recoil”. Instead of counting the number of hits for the day, the top echelon shooters count the number of shots they dropped.
Calibers of Choice — Small is Big — the 6mms Dominate
6mmBR Improved cartridges (6mm Dasher, 6BR Ackley) and mid-sized 6mms (such as 6mm Creedmoor) dominate the field. In addition we are seeing some guys running the 22 BR and 22 BRA, which work surprisingly well. [Editor: Run the ballistics with a .22 Cal 80-grainer and you’ll see why.]
Wind Monitoring and Ballistics
Kestrel Environmental Meters with Applied Ballistics are “must haves”. I have found my Really Right Stuff tripod and Vortex 12×50 Razor binoculars extremely useful for locating targets and going through the target shooting order before it was my turn to shoot. Watching what the wind and competitor’s rounds are doing before you are on the gun is a huge benefit.
Great Match with Great Shooters
Tough Competition with a Field of Ace Practical Marksmen
The field of competitors at this match was stacked. I heard there were 20 competitors in attendance who have won national-level PRS or NRL events. 20 top-echelon competitors mixed in with a solid field of shooters made it a tough for anyone looking to finish at the top.
BREAKING NEWS 4/4/2019: The decision holding California’s ban on full-capacity magazines to be unconstitutional still stands. However Federal Judge Benitez has issued a stay on sales of full-capacity magazines in California, pending appeal. This STAY ORDER goes into effect April 5, 2019 at 5:00 pm. This will temporarily halt sales of magazines with 10+ round capacity, while his decision is under appeal. Those who ordered these magazines over the past few days will be able to take possession, but the doors are shut again for the time being.TEXT of STAY ORDER.
Full-capacity magazines are legal again in California. This is big news for the Golden State, where sales of magazines holding more than 10 rounds have been banned for nearly two decades. Why the change — why can Californians buy 20- and 30-rounders again? The answer is that the California mag ban was ruled unconstitutional by a Federal Judge on March 29, 2019.
In the Duncan v. Becerra case, Federal District Court Judge Roger Benitez ruled that the California laws banning full-capacity magazines were invalid under the Second Amendment of the U.S. Constitution. Judge Benitez wrote “Individual liberty and freedom are not outmoded concepts,” and declared unconstitutional California’s restrictions on magazines holding more than 10 rounds. READ Full Opinion HERE.
As background, California has prohibited sales of full-capacity magazines since 2000. But citizens who owned mags with 10+ capacity were allowed to keep them — until recently. A new law required magazine owners to destroy or surrender their magazines. This prompted a new NRA lawsuit which resulted in the ruling by Federal Judge Benitez.
California’s State Attorney General will appeal Judge Benitez’s decision to the 9th Circuit Court of Appeals, known for its left-leaning bias. But in the meantime, the doors are open. Full-capacity magazines are now legal to purchase and own in California.
According to ABC News in Fresno, CA: “Ammunition stores are eagerly welcoming back California customers after the state’s nearly twenty-year ban on high-capacity magazines. The ruling has prompted a massive shipment of high-capacity magazines to California.” And yes, Californians can now buy full-capacity mags from online vendors. This notice recently appeared on Brownells.com:
This article first appeared in 2014. We are reprising it at the request of many readers who are fans of the .30-06 cartridge.
The “Old Warhorse” .30-06 Springfield cartridge is not dead. That’s the conclusion of Forum member Rick M., who has compared the 1000-yard performance of his .30-06 rifle with that of a rig chambered for the more modern, mid-sized 6.4×47 Lapua cartridge. In 12-16 mph full-value winds, the “inefficient and antiquated” .30-06 ruled. Rick reports:
“I was shooting my .30-06 this past Sunday afternoon from 1000 yards. The wind was hitting 12-16 mph with a steady 9 O’clock (full value) wind direction. My shooting buddy Jeff was shooting his 6.5×47 Lapua with 123gr Scenar bullets pushed by Varget. Jeff needed 13 MOA left windage to keep his 6.5x47L rounds inside the Palma 10 Ring. By contrast I only needed 11.5 MOA left windage with my .30-06. I was shooting my ’06 using the 185gr Berger VLD target bullet with H4350. I managed the same POI yet the .30-caliber bullet only needed 11.5 MOA windage. That’s significant. From this experience I’ve concluded that the Old Warhorse ain’t quite dead yet!”
Rick likes his “outdated” .30-06 rifle. He says it can deliver surprisingly good performance at long range:
“To many of the younger generation, the Old Warhorse .30-06 is ‘outdated’ but I can guarantee that the .30-06 Springfield is a VERY ACCURATE cartridge for 1000-yard shooting (and even out further if need be). With some of the advanced powders that we have today, the .30-06 will surprise many shooters with what it’s capable of doing in a good rifle with the right rate of twist. My rifle has a 1:10″ twist rate and I had it short-throated so that, as the throat erodes with time, I could just seat the bullets out further and keep right on shooting. My recent load is Berger 185gr Target VLDs pushed by IMR 4350. This is a very accurate load that moves this bullet along at 2825 fps.”
Yesterday, April Fools Day, websites offered their best prank stories to readers. Our own 7.6 Creedmoor satire fooled more than a few folks it seems. There were some pretty good spoof videos as well, none better than this very funny production from our friends at Vortex Optics. The video showcase Vortex’s new C.O.B.R.A., a state-of-the-art smart-scope with the capabilities of an Alexa-type digital assistant. Watch the video — you’ll see that the clever C.O.B.R.A. has a mind of its own. Enjoy!
C.O.B.R.A. from Vortex
Introducing Vortex C.O.B.R.A., the Combat Optic Battle Ready Assistant, a virtual personal assistant fine-tuned with features specifically for hunters and shooters. Embedded into select Vortex riflescopes, you can now control your smart-scope with the power of your voice. Bore-sighting, dialing turrets, adjusting magnification, and setting your zero stop are just some of the hundreds of tasks that can be accomplished with simple hands free commands. Get C.O.B.R.A, and get your scope working for you!
The 17 Mach 2 (aka “17 HM2″) is making a come-back. We’re glad. This high-velocity round fits actions and magazines designed for the .22 LR, so it’s an easy barrel-swap upgrade for most rimfire bolt-guns (semi-autos are more complicated). The 17 Mach 2 cartridge doesn’t deliver the velocity of the 17 HMR, but it is still way faster than a .22 LR. Expect 2000-2100 fps with 17 Mach 2 compared to 1250 fps for “High-Velocity” .22 LR ammo. And, importantly, 17 Mach 2 ammo is much less expensive than 17 HMR. If you shop around, you can get 50 rounds of 17 Mach 2 for about $6.50. That’s 40% cheaper than the average $11 price of 17 HMR — a significant savings!
17 Mach 2 Major Selling Points:
1. 60% more velocity than typical “High-Velocity” .22 LR ammo.
2. 40% less cost than average 17 HMR ammo.
3. 17 Mach 2 OAL is compatible with .22 LR receivers and magazines.
Toggle Bolt Volquartsen Summit in 17 HM2
It’s rare for us to see a new rimfire that we’d really like to own, but the new Summit from Volquartsen fits the bill. This versatile rifle features a cool, straight-pull toggle bolt, similar to those on elite Biathalon rifles. You can see how this gun shoots in this informative 22 Plinkster video:
22 Plinkster Tests Volquartsen Summit Rifle in 17 Mach 2
The 17 Mach 2 (17 HM2) is making a comeback. Now leading manufacturers are offering this efficient little rimfire cartridge in some nice rifles. Both Anschutz and Volquartsen will offer new 17 Mach 2 rifles in 2019. The Volquartsen Summit features a lightweight, carbon fiber-wrapped barrel threaded 1/2-28 for brakes or suppressors. The Summit boasts a nice 1.75-lb trigger pull. The Summit’s CNC-machined receiver features a +20 MOA Rail. NOTE: The video shows a silhouette-style laminated wood stock. However, the Summit comes standard with a composite Magpul stock that actually works better for shooting from a bench.
17 Mach 2 — Best Rimfire Bang for the Buck?
If you are looking for a capable, squirrel-busting round or a fun plinking round, you should definitely consider the 17 Mach 2, especially since CCI has committed to production of the little cartridge. CCI recently rolled out its “Gen 2″ 17 Mach 2 VNT Ammo with polymer tip (photo right).
The 17 Mach 2 propels the same 17gr bullet as the 17 HMR, but the 17 Mach 2 runs roughly 20% slower — 2000-2100 fps vs. 2500 fps for the 17 HMR.
Considering that 17 HMR ammo is now running $10 to $12 a box, the 17 Mach 2 is an excellent value by comparison. When you consider overall “bang for the buck”, for many shooters, it makes sense to use the 17 Mach 2 rather than a 17 HMR. You save money, barrel life is a little longer, and the 17 Mach 2 is still a much more potent cartridge than the .22 LR. Check out this comparison, and note how the 17 Mach 2 has a much flatter trajectory than the .22 LR:
Hornady’s 17 Mach 2 has a 2100 FPS muzzle velocity vs. 1255 FPS for “High-Velocity” .22 LR.
Leveraging the incredible success of the 6.5 Creedmoor cartridge, ammo-makers and rifle manufacturers have teamed up to produce a bigger Creedmoor cartridge — the 7.6 Creedmoor. The latest addition to the Creedmoor line gets its name from its 7.62mm bullet dimension. Yep, that makes it a .30-cal cartridge, but the creators stuck with the metric title for consistency. Makes sense. We like the way “7.6 Creedmoor” sounds and we bet consumers will too. The 6.5 Creedmoor has been a singular success — it is by far the most popular new cartridge introduced in the last decade. We think the 7.6 Creedmoor could become equally successful in short order.
In creating the new 7.6 Creedmoor, the product engineers were primarily concerned with accuracy, reliability, and compatibility. In a brilliant marketing stroke, the 7.6 Creedmoor’s designers crafted this cartridge to be 100% compatible with existing .308 Winchester and 7.62×51 rifles. So you can shoot the 7.6 Creedmoor safely in your existing .308 Win deer rifle or F-TR rig. As one ammo-maker’s marketing manager told us: “The 7.6 Creedmoor gives you everything you liked about the .308 Win, with a trendy name and the undeniable Creedmoor cachet. The 6.5 Creedmoor has become hugely popular. We expect the new 7.6 Creedmoor to do as well, or better!” We agree. Consider this — the 7.6 Creedmoor offers much better barrel life than the 6.5 Creedmoor, along with better bullet selection, particularly for hunters. With these advantages, how could the 7.6 Creedmoor not become a huge hit? The Creedmoor name alone should ensure success.
We discussed the new 7.6 Creedmoor with Dennis DeRille, one of the “founding fathers” of the 6.5 Creedmoor. Dennis said — “The Creedmoor name is synonymous with innovation and tactical success. This new 7.6 should live up to its name as it delivers .308 Win performance in a package for the 21st Century.”
Reassuring .308 Win Ballistics and Die Compatibility
Another great feature of the new 7.6 Creedmoor is that you can use existing .308 Win dies and reloading components. That excited one PRS shooter: “I had all this old .308 brass and .30-Cal bullets sitting around. When I heard about the 7.6 Creedmoor I said ‘Wow this is great, I can use this stuff in a Creedmoor now’. I know it will be accurate based on the name alone. That’s cool — tacticool!”
Because the new 7.6 Creedmoor shares case capacity and design details with the venerable .308 Win, it also shares the .308 Win’s impressive ballistics performance. “Whatever you can do with a .308 Win, you can do with the 7.6 Creedmoor… and then some!” says Hornady. Here is a chart showing projected velocities for the 7.6 Creedmoor with various barrel lengths and bullet weights.
NRA Approves 7.6 Creedmoor for F-TR Competition
Currently, NRA competition rules restrict F-TR rifles to the .308 Win (7.62×51) and .223 Rem (5.56×45) chamberings. But that’s going to change. Starting in June 2019, the NRA will allow 7.6 Creedmoor rifles in all F-TR matches. In addition, the 7.6 Creedmoor can be used in service rifles such as the popular M1A. It’s great to see this old battle rifle updated with Creedmoor accuracy and performance.
USA and Foreign Ammo Makers will Produce 7.6 Creedmoor Ammo
7.6 Creedmoor factory-loaded ammunition will be available from all major USA ammo-makers including Federal, Hornady, CCI, and Remington. As well, foreign ammo-makers Hirtenberger, Sellier & Bellot, and Prvi Partizan have pledged to produce 7.6 Creedmoor ammunition. That’s good news for shooters who want affordable Creedmoor ammo. One ammo-maker told us: “The whole industry is excited about the 7.6 Creedmoor. To be honest, .308 Win ammo sales have been declining for a number of years. Now we can repackage those same great components and market them to a new set of consumers reared on the 6.5 Creedmoor. This is a great deal for ammo-makers, who know how excitable Creedmoor fan-boys can be!”
Smith & Wesson Model 617 — Smith’s Model 617 is extremely accurate, with a very crisp trigger (in single-action mode), and good sights. You can learn all the fundamentals with this ultra-reliable handgun, shooting inexpensive .22 LR ammo. The Model 617 is rugged, durable, and can give you a lifetime of shooting fun.
On his 
